MAX114ENG+ - 8-Bit, 4-Channel, 1Msps ADC | Analog Devices
MPN: MAX114ENG+ ✓ چالاکMAX114ENG+ گشتی
An ADC is a data-acquisition IC that converts an analog voltage into a digital code. Within the broader semiconductor and data-converter hierarchy, the MAX114 belongs to the parallel-interface ADC family. It combines four analog input channels with microprocessor-compatible digital outputs, allowing a host processor or microcontroller to read sampled values directly. The half-flash conversion architecture supports a 660ns conversion time according to the manufacturer datasheet.
Key features include 8-bit resolution, four analog input channels, a maximum conversion rate of 1Msps, parallel data access, and a low-power shutdown current of 1µA. The MAX114ENG+ is identified as an industrial-temperature variant and is offered in a 24-pin PDIP package. These characteristics make it suitable for compact control, monitoring, and instrumentation systems where multiple slowly changing analog signals must be digitized without a high-speed serial data link.
The half-flash ADC architecture uses internal sampling and conversion stages to achieve the stated 1Msps throughput. Parallel output reduces protocol overhead compared with a serial ADC, although it requires more PCB traces and host input resources. Each conversion produces one 8-bit code, giving 256 representable levels for a single analog channel. System accuracy therefore depends on analog front-end design, reference stability, source impedance, sampling timing, and the quantization resolution of the converter.
Typical applications include industrial process monitoring, temperature and pressure acquisition, laboratory measurement equipment, embedded control panels, and general-purpose sensor interfaces. The four-channel arrangement is useful when several sensors must be sampled through a common multiplexer and parallel host interface. The 1µA shutdown mode also helps designers reduce standby consumption when the measurement function is not continuously required.
For reliable implementation, maintain the supply voltage and logic levels required by the manufacturer datasheet, connect the analog reference exactly as specified, and account for source-impedance and acquisition-time requirements. Route analog and digital return currents carefully, provide suitable bypass capacitance near the supply pins, and use the parallel bus only where the host can support the associated pin count and timing.
This page combines manufacturer device information with package, purchasing, replacement, and engineering guidance. It also distinguishes genuine same-footprint drop-in options from converters that require a different package or interface, helping designers avoid unnecessary PCB redesigns.
جێگرەوەکانی جێگۆڕکێ بۆ MAX114ENG+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX114ENG+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Converter Type, Package, Temperature Grade.
MAX114CNG+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX114ENG+ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | Flash-method ADC |
| وردی | 8 bit |
| Number of Input Channels | 4 channels |
| ڕێژەی نموونەگرتن | 1 MSps |
| Conversion Time | 660 ns |
| ڤۆڵتیەی دابینکردن | +5 V |
| Power-Down Current | 1 µA |
| ڕووکار | 8-bit parallel |
| Architecture | Half-flash |
| پاکێج | 24-pin PDIP |
| شێوازی دامەزراندن | Through-hole |
| Temperature Grade | Industrial |
| Moisture Sensitivity Level | MSL 1 |
| Peak Reflow Temperature | 260 °C |
| Time at Peak Reflow Temperature | 30 s |
| Terminal Finish | Matte tin |
| JESD-609 Classification | e3 |
ڕێنمایی ڕێکخستنی پینی MAX114ENG+ 24-pin pdip
ڕێکخستنی پین بۆ MAX114ENG+ (پاکێجی 24-pin pdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX114ENG+.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX114ENG+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Monitoring, Temperature Sensor Acquisition, Laboratory Instrumentation, Embedded Control Panel, Low-Power Sensor Interface, Power and System Monitoring.
Industrial Process Monitoring
The MAX114ENG+ fits industrial monitoring systems that must digitize several sensor signals using a +5V-powered control platform. Its four analog inputs allow up to four channels to be serviced by one converter, while the 8-bit parallel interface provides direct access to the latest conversion result. The 1Msps sampling rate and 660ns conversion time are substantially faster than typical slow process signals, providing timing margin for multiplexed sensor acquisition. The industrial-temperature designation makes the part a candidate for equipment operating beyond commercial ambient limits. Engineers should still verify every electrical limit in the manufacturer datasheet and preserve the specified reference, grounding, and bypass arrangements.
پێشنیارکراو
Temperature Sensor Acquisition
The MAX114ENG+ can serve as the conversion stage in a multi-channel temperature measurement system built around resistive or semiconductor sensors. Four multiplexed analog inputs reduce the number of converters required when several temperature points must be monitored, and the 8-bit result provides 256 quantization levels for each conversion. A 1Msps conversion capability leaves substantial bandwidth for sensor filtering and sampling strategy optimization. The half-flash architecture and 660ns conversion time make the digital output available quickly enough for supervisory control loops. For accurate results, design the input network for sensor range, add suitable anti-alias filtering, and isolate the analog return path from switching and digital currents.
پێشنیارکراو
Laboratory Instrumentation
The MAX114ENG+ is appropriate for compact laboratory instruments that sample a small number of low-bandwidth analog channels and transfer results through a parallel processor interface. The four-channel multiplexer can consolidate separate reference, status, or measurement signals into one converter, while the 8-bit parallel output simplifies connection to older microprocessor systems. A 1Msps maximum rate supports acquisition strategies that include multiple readings, averaging, or continuous monitoring. Because 8-bit resolution limits absolute precision, use gain staging when the input spans only a fraction of the converter range. The single +5V supply also simplifies power planning in legacy +5V measurement equipment.
پێشنیارکراو
Embedded Control Panel
The MAX114ENG+ can be used in an embedded control panel that gathers analog set points, sensor readings, and status signals from as many as four inputs. Its parallel output works well with microprocessor systems that can allocate eight data lines and a small number of control pins. The 1Msps sampling rate provides timing flexibility for averaging or sequencing measurements, and the 660ns conversion time allows rapid updates when a control loop requires current input data. The through-hole PDIP package is particularly convenient for industrial controller boards assembled with conventional insertion soldering. Layout must keep the analog inputs away from high-current switching traces and provide a clean return path for the converter reference and ground connections.
پێشنیارکراو
Low-Power Sensor Interface
The MAX114ENG+ is suitable for a duty-cycled sensor interface in which the converter is active only while a measurement is required. Four analog inputs permit several sensing elements to share the converter, and the specified 1µA power-down current helps limit standby consumption when the host disables acquisition between measurement cycles. The 8-bit output is appropriate for coarse monitoring, threshold decisions, and supervisory loops rather than precision analysis. Designers should use the manufacturer timing information to sequence power-down and wake-up correctly, and should account for reference settling after the converter returns to active mode. The parallel interface remains a practical consideration because it requires dedicated host bus pins.
پێشنیارکراو
Power and System Monitoring
The MAX114ENG+ can monitor several slowly changing power-system or board-status voltages in an embedded controller. Four input channels support measurements such as supply trend, battery condition, or divided sensor outputs, while the 1Msps rate is ample for supervisory and protection functions. The 8-bit resolution can be useful when each input is conditioned into a known range, and the parallel bus allows a host processor to read the selected result without a serial-driver burden. Because power-monitoring signals can contain switching noise, use input filtering, scale each channel appropriately, and maintain a quiet analog reference. The industrial-temperature ordering option is relevant when the monitored equipment operates in an extended ambient environment.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX114ENG+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX114CNG+ |
|---|---|---|
| Package | 24-pin PDIP | 24-pin PDIP - same |
| Brand | Analog Devices | Analog Devices |
| ADC Resolution | 8 bit | 8 bit |
| Input Channels | 4 channels | 4 channels |
| Maximum Sampling Rate | 1 MSps | 1 MSps |
| Conversion Time | 660 ns | 660 ns |
| Interface | 8-bit parallel | 8-bit parallel |
| Supply Voltage | +5 V | +5 V |
| Power-Down Current | 1 µA | 1 µA |
| Temperature Grade | Industrial | Commercial |
| Conversion Architecture | Half-flash | Half-flash |
| Mounting Style | Through-hole | Through-hole |
جیاکەرەوە سەرەکییەکان
- Extended-temperature ordering option (بەراورد بەMAX114CNG+)
- Four-channel acquisition in one converter (بەراورد بەMAX114CNG+)
- Direct parallel-host integration (بەراورد بەMAX114CNG+)
تێبینییەکانی دیزاین
Use the manufacturer pin-description table and package drawing to assign every one of the 24 PDIP connections before PCB routing. Keep the analog input traces short, place input filtering components close to their associated pins, and route digital output and control signals away from the analog input area. Provide a low-impedance ground connection and separate analog and digital return paths where the system layout permits.
Place the required supply bypass capacitor immediately adjacent to the device supply pins and connect its ground terminal to the low-impedance ground plane. Keep the analog reference source stable and provide decoupling in accordance with the manufacturer application guidance. Review the power-up sequence and any external circuitry connected to the analog inputs so that they do not create excessive loading or transients during startup.
Do not treat the 8-bit resolution as equivalent to 8-bit overall system accuracy. Input offset, full-scale error, nonlinearity, reference accuracy, source impedance, and noise all contribute to the final measurement uncertainty. For small sensor signals, add suitable gain ahead of the ADC and filter each channel for its expected bandwidth. Also check that the host system can support the full parallel interface and required control timing.
The MAX114ENG+ is an analog-to-digital converter rather than a power semiconductor, so a safe operating area chart is not applicable. Thermal design should still account for the device's specified supply and ambient limits, particularly in sealed industrial enclosures. Maintain airflow around the board, avoid placing heat-producing regulators directly beneath the PDIP, and verify the complete assembly temperature against the ordering code's temperature grade.
زانیاری پابەندبوون
The available product information identifies JESD-609 classification e3, matte-tin terminal finish, MSL 1, and a 260 °C peak reflow condition. RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status are not stated on the listed pages.