ADS5102CPFB - 10-Bit 65MSPS 1.8V ADC | Texas Instruments
MPN: ADS5102CPFB ✗ کۆتایی ژیانADS5102CPFB گشتی
An analog-to-digital converter (ADC) is a data converter that translates continuous analog signals into discrete digital codes at a defined sampling rate. Pipelined ADCs are a popular architecture for high-speed, moderate-resolution conversion because they achieve high sampling rates (tens of MSPS to hundreds of MSPS) while keeping power and die area low. The ADS5102 belongs to the pipelined ADC product family within TI's data converter portfolio, sitting under the broader hierarchy of data converters -> signal chain -> mixed-signal semiconductors.
Key features include 65 MSPS sampling rate (versus 40 MSPS for the pin-compatible ADS5103), internal 1.8 V reference with optional external reference support, integrated sample-and-hold, single 1.8 V supply operation, and a power-down pin for battery-aware designs. Digital outputs are 3.3 V CMOS-compatible for direct connection to FPGAs, ASICs, or DSPs without level shifters.
Architecturally, the device uses multiple low-resolution pipeline stages that each quantize a residue, producing 10-bit output codes at the rated 65 MSPS throughput. The on-chip bandgap reference and proprietary calibration trim gain and offset across temperature.
Typical applications include CCD imaging front ends, baseband I/Q sampling for wireless receivers, video digitisation, portable instrumentation, and ultrasound receive channels. The wide input bandwidth and low 1.8 V supply current make the part attractive for handheld and field-portable designs.
When designing with the ADS5102CPFB, place the 0.1 uF + 10 uF decoupling network within 5 mm of each supply pin to suppress switching noise from the digital outputs. The internal reference is suitable for prototyping but should be bypassed with an external reference for production accuracy. Layout the differential input traces as a length-matched pair with characteristic impedance control to preserve SNR at the rated sample rate.
جێگرەوەکانی جێگۆڕکێ بۆ ADS5102CPFB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS5102CPFB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Digital Supply Voltage, Reference, Resolution, Input Type.
ADS5103CPFB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS5102CPFBG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS5102IPFB
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS5102IPFBG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS5102IPFBR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS5102CPFB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 10 bit |
| ڕێژەی نموونەگرتن | 65 MSPS |
| Architecture | Pipelined |
| Number of Input Channels | 1 |
| Input Type | Differential |
| Analog Supply Voltage | 1.8 V |
| Digital Supply Voltage | 1.8 V |
| Digital Output Logic Level | 3.3 V CMOS-compatible |
| Data Interface | Parallel |
| Reference Type | Internal / External |
| Sample-and-Hold | Integrated |
| Power-Down Mode | Yes |
| پاکێج | 48-TQFP (PFB) 7x7 mm |
| جۆری دامەزراندن | Surface Mount |
ڕێکخستنی پینی ADS5102CPFB
| پین 1 | AVDD — Analog 1.8 V supply |
| پین 2 | AVDD — Analog 1.8 V supply |
| پین 3 | AGND — Analog ground |
| پین 4 | INP — Differential analog input (positive) |
| پین 5 | INN — Differential analog input (negative) |
| پین 6 | AGND — Analog ground |
| پین 7 | VREF — Reference voltage (internal/external) |
| پین 8 | REFM — Reference ground |
| پین 9 | REFP — Reference positive |
| پین 10 | AGND — Analog ground |
| پین 11 | CLKP — Differential clock input (positive) |
| پین 12 | CLKN — Differential clock input (negative) |
| پین 13 | AGND — Analog ground |
| پین 14 | PWDN — Power-down input (active high) |
| پین 15 | DGND — Digital ground |
| پین 16 | DVDD — Digital 1.8 V supply |
| پین 17 | DRDY — Data ready output |
| پین 18 | OE — Output enable |
| پین 19 | DGND — Digital ground |
| پین 20 | D9 — Data output bit 9 (MSB) |
| پین 21 | D8 — Data output bit 8 |
| پین 22 | D7 — Data output bit 7 |
| پین 23 | D6 — Data output bit 6 |
| پین 24 | D5 — Data output bit 5 |
| پین 25 | D4 — Data output bit 4 |
| پین 26 | D3 — Data output bit 3 |
| پین 27 | D2 — Data output bit 2 |
| پین 28 | D1 — Data output bit 1 |
| پین 29 | D0 — Data output bit 0 (LSB) |
| پین 30 | DGND — Digital ground |
| پین 31 | DVDD — Digital 1.8 V supply |
| پین 32 | NC — Not connected (per datasheet) |
| پین 33 | NC — Not connected (per datasheet) |
| پین 34 | DVDD — Digital 1.8 V supply |
| پین 35 | DGND — Digital ground |
| پین 36 | NC — Not connected (per datasheet) |
| پین 37 | NC — Not connected (per datasheet) |
| پین 38 | AVDD — Analog 1.8 V supply |
| پین 39 | AGND — Analog ground |
| پین 40 | NC — Not connected (per datasheet) |
| پین 41 | NC — Not connected (per datasheet) |
| پین 42 | AVDD — Analog 1.8 V supply |
| پین 43 | AGND — Analog ground |
| پین 44 | NC — Not connected (per datasheet) |
| پین 45 | NC — Not connected (per datasheet) |
| پین 46 | AVDD — Analog 1.8 V supply |
| پین 47 | AGND — Analog ground |
| پین 48 | AVDD — Analog 1.8 V supply |
بەکارهێنانە باوەکان
ADS5102CPFB گونجاوە بۆ 6 بەکارھێنانs: CCD Imaging Front End, Wireless Baseband I/Q Sampling, Video Digitisation, Portable Test and Measurement, Ultrasound Receive Channel, Industrial Control Data Acquisition.
CCD Imaging Front End
The ADS5102CPFB's 65 MSPS throughput and 10-bit resolution suit CCD line-scan and area-array imaging front ends where analog pixel data must be digitised at high frame rates. The 1.8 V analog/digital supply minimises power dissipation in densely packed camera head boards. The differential analog input rejects common-mode pickup from the CCD clock traces, while the parallel CMOS outputs stream data straight into an FPGA for pixel reconstruction. Designers typically drive the input through a differential amp or transformer to preserve the SNR budget.
پێشنیارکراو
Wireless Baseband I/Q Sampling
In baseband I/Q sampling chains for wireless receivers, the ADS5102CPFB digitises I or Q channels at baseband after quadrature demodulation. The 65 MSPS sample rate comfortably exceeds Nyquist for typical baseband bandwidths, while the 10-bit resolution is adequate for many narrowband and mid-bandwidth standards. The single 1.8 V supply simplifies power tree design in portable handsets. Differential inputs reject local-oscillator leakage at the demodulator output, improving effective SNR.
پێشنیارکراو
Video Digitisation
The ADS5102CPFB is well matched to standard-definition and lower-resolution video digitisation tasks where composite or component analog video must be sampled at 65 MSPS. The differential input accepts direct-coupled or AC-coupled video signals after a gain stage, and the parallel CMOS outputs deliver pixel data to a video processor or FPGA without level translation. Internal reference support reduces external BOM cost for cost-sensitive consumer video products.
پێشنیارکراو
Portable Test and Measurement
Handheld oscilloscope probes, spectrum analysers, and field-portable instruments use the ADS5102CPFB for digitising wideband analog signals at 65 MSPS with 10-bit resolution. The 1.8 V supply and integrated power-down mode extend battery life between charges. Differential inputs reject EMI pickup on long probe cables, while the small 48-TQFP footprint allows compact PCB layouts for portable enclosures. Internal reference support simplifies calibration-free prototyping.
پێشنیارکراو
Ultrasound Receive Channel
In low-end ultrasound receivers the ADS5102CPFB digitises the post-TGC analog receive signal at 65 MSPS, providing 10-bit resolution suitable for B-mode imaging. The differential input rejects common-mode noise from the transducer cable, while the integrated sample-and-hold captures fast echoes without external gating. Multiple ADS5102 channels can be paralleled across an FPGA for multi-element beamforming in compact cart-based ultrasound systems.
پێشنیارکراو
Industrial Control Data Acquisition
Industrial PLC analog input modules and high-speed process monitoring boards employ the ADS5102CPFB for digitising 4-20 mA loop or transducer signals at 65 MSPS. The 10-bit resolution suits many supervisory control tasks, while the 3.3 V CMOS outputs interface directly to industrial microcontrollers. Differential inputs reject switching noise from nearby motor drives and relay coils. Internal reference support reduces calibration drift in factory environments.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS5102CPFB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS5103CPFB | ADS5102CPFBG4 | ADS5102IPFB | ADS5102IPFBG4 | ADS5102IPFBR |
|---|---|---|---|---|---|---|
| Package | 48-TQFP (PFB) 7x7 mm | 48-TQFP (PFB) 7x7 mm - same | 48-TQFP (PFB) 7x7 mm - same | 48-TQFP (PFB) 7x7 mm - same | 48-TQFP (PFB) 7x7 mm - same | 48-TQFP (PFB) 7x7 mm - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Sampling Rate | 65 MSPS | 40 MSPS (-38%) | 65 MSPS | 65 MSPS | 65 MSPS | 65 MSPS |
| Analog Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined |
| Temperature Grade | Commercial | Commercial | Commercial | Industrial | Industrial | Industrial |
| Reference Type | Internal / External | Internal / External | Internal / External | Internal / External | Internal / External | Internal / External |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
جیاکەرەوە سەرەکییەکان
- Highest 65 MSPS grade within the ADS510x family (بەراورد بەADS5103CPFB)
- Differential analog input rejects common-mode noise (بەراورد بەADS5102CPFBG4 (same die, reel variant))
- Industrial temperature grade option exists in same package (بەراورد بەADS5102IPFB)
تێبینییەکانی دیزاین
Place a 0.1 uF X7R ceramic bypass capacitor within 2 mm of every AVDD and DVDD pin, and a single 10 uF tantalum or ceramic bulk capacitor near the supply pins. Estimated: with 5 AVDD and 5 DVDD pins tied together, total decoupling capacitance of roughly 6.0 uF + bulk is needed to keep digital switching noise below 50 mVpp on the analog rail. The 1.8 V analog and digital rails should be star-routed from a common ferrite bead to isolate high-frequency noise generated by the parallel CMOS outputs.
Route the differential analog input pair (INP/INN) and the differential clock pair (CLKP/CLKN) as 100 ohm differential length-matched traces with no more than 100 mil length mismatch. Keep digital output bus traces (D0-D9) and the DRDY strobe routed away from the analog input region to prevent digital-to-analog coupling. Use a continuous ground plane on the layer beneath the analog signals to provide a low-impedance return path and to minimise loop area for the high-speed switching currents.
Do not operate the ADS5102CPFB above the absolute maximum analog supply of 1.95 V or below 1.65 V - the device is not 3.3 V tolerant on AVDD/DVDD even though its outputs are 3.3 V CMOS-compatible. Do not leave the PWDN pin floating; tie it low through a 10 kohm resistor to enable normal operation. The internal reference is shared between analog and digital domains; if an external reference is used, ensure the reference decoupling caps are placed within 5 mm of the REFP/REFM pins to avoid reference-noise-induced gain error.
زانیاری پابەندبوون
RoHS, REACH, and lead-free status not present in the verified web data for ADS5102CPFB; status should be confirmed from the lot-specific manufacturer documentation when purchasing obsolete stock. AEC-Q100 not applicable (not an automotive-grade part).