ADS7842EB - 12-Bit 4-Channel ADC | Texas Instruments
MPN: ADS7842EB ✓ چالاکADS7842EB گشتی
An ADC is a data-acquisition IC that converts an analog voltage into a numeric value for processing, measurement, or display. The ADS7842EB belongs to the successive-approximation ADC family and combines an internal 4-channel multiplexer with a 12-bit conversion engine. Its parallel interface transfers each converted code directly to a digital system, making it suitable for designs that favor deterministic sampling and straightforward bus connection over serial-interface simplicity.
Key features include four analog inputs, 12-bit resolution, and a 200 kSPS sampling rate. The converter provides ±1 LSB integral and differential nonlinearity, no missing codes, and 72 dB SINAD. Its low power consumption is specified as 2 mW, while the single-supply architecture reduces the number of external rails required in acquisition equipment. The industrial-grade ADS7842EB is identified as a 28-pin SSOP device.
Internally, the four-channel multiplexer routes one selected input to the successive-approximation conversion stage. The digital portion presents the 12-bit result through a parallel interface, allowing the host processor, microcontroller, or programmable logic to capture the conversion result. Because the input is multiplexed, the system must select each channel and allow the associated acquisition and conversion timing before interpreting the output code.
Typical uses include industrial process monitoring, data-acquisition instruments, panel-meter interfaces, sensor signal conditioning systems, and embedded measurement equipment. The four-channel arrangement is especially useful when several sensors must share one converter while retaining a compact parallel-data architecture. System designers should also account for acquisition time, conversion time, channel-selection sequencing, reference accuracy, and the required settling time.
The primary layout consideration is keeping analog inputs, voltage reference, and ground connections away from fast digital output traces. Place input and reference bypass capacitors close to their associated pins, use a quiet analog ground strategy, and route the 12-bit parallel bus in a consistent topology. Verify signal levels and timing against the host device before treating the ADS7842EB as a direct interface replacement.
This product page combines the verified manufacturer and distributor descriptions with practical engineering guidance, package and interface comparisons, and drop-in-family alternatives. It is intended to support part selection, schematic review, PCB planning, and qualification of the ADS7842EB for multi-channel analog measurement designs.
جێگرەوەکانی جێگۆڕکێ بۆ ADS7842EB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7842EB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Digital Interface, Operating Temperature Range, Package, Differential Nonlinearity, Integral Nonlinearity.
ADS7842E
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7842EB/1K
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS7842EB/1KG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS7842E/1KG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7842EB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| ADC Type | Successive-approximation sampling ADC |
| وردی | 12 bit |
| Number of Input Channels | 4 channels |
| Maximum Sampling Rate | 200 kSPS |
| Digital Interface | 12-bit parallel output |
| Integral Nonlinearity | ±1 LSB maximum |
| Differential Nonlinearity | ±1 LSB maximum |
| Missing Codes | No missing codes |
| Signal-to-Noise and Distortion | 72 dB SINAD |
| Power Consumption | 2 mW |
| Supply Architecture | Single supply |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| پاکێج | 28-pin SSOP (DB) |
| جۆری دامەزراندن | Surface mount |
| Input Multiplexer | 4-to-1 analog input multiplexer |
| دۆخی RoHS | RoHS-compliant |
| Lead-Free Status | Lead-free |
ڕێنمایی ڕێکخستنی پینی ADS7842EB 28-pin ssop (db)
ڕێکخستنی پین بۆ ADS7842EB (پاکێجی 28-pin ssop (db)). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7842EB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS7842EB گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Panel Meter and Metering, Data-Acquisition Instrument, Sensor Signal Conditioning, Portable Environmental Monitor, Control and Automation Interface.
Industrial Process Measurement
The ADS7842EB fits four-channel industrial process monitoring because its internal 4-to-1 multiplexer can sample multiple pressure, temperature, or level signals through one 12-bit converter. The 200 kSPS maximum rate supports fast acquisition, while ±1 LSB nonlinearity and no missing codes help maintain consistent readings across the conversion range. Its -40°C to +85°C industrial rating also suits equipment operating outside commercial-temperature limits. Place input protection, filtering, and reference components near the converter, then synchronize channel selection and data capture in the controller.
پێشنیارکراو
Panel Meter and Metering
The ADS7842EB is suitable for a multi-input digital panel meter where four analog channels must be converted with limited external circuitry. Its 12-bit resolution provides 4096 digital codes, while the parallel output permits direct connection to a display controller, microcontroller, or logic device. A 200 kSPS sampling capability allows multiple measurements to be refreshed rapidly. Engineers should design a quiet reference and appropriately filtered sensor inputs because converter accuracy depends on the complete analog front end rather than on resolution alone.
پێشنیارکراو
Data-Acquisition Instrument
The ADS7842EB fits compact data-acquisition equipment that must digitize up to four analog channels and present 12-bit parallel results to a controller. Its 200 kSPS throughput provides useful timing margin for multichannel sweeps, while 72 dB SINAD supports measurement-quality signal acquisition. The 28-pin SSOP package also allows the converter to coexist with reference, interface, and protection circuitry on a densely populated analog board. Validate acquisition timing, bus direction control, and settling requirements with the specific system clock.
پێشنیارکراو
Sensor Signal Conditioning
The ADS7842EB can serve as the final conversion stage for four conditioned sensor channels, particularly where a 12-bit parallel result is preferable to a serial data stream. The four-input multiplexer consolidates analog routing, and the 200 kSPS maximum sampling rate supports responsive updates. System designers should match each sensor's full-scale output to the converter input range, establish an accurate reference, and include anti-alias filtering before the selected input is converted. The industrial temperature range supports controlled industrial environments.
پێشنیارکراو
Portable Environmental Monitor
The ADS7842EB can digitize temperature, humidity, light, and status inputs in a portable environmental monitor when low converter power is useful. Its specified 2 mW power consumption and single-supply architecture help simplify battery-powered designs, while four analog inputs reduce the component count. The device's industrial temperature range provides useful headroom for many deployed products. Designers should still calculate the complete system power budget, use a low-leakage reference and protection network, and verify the enclosure temperature against the -40°C to +85°C rating.
پێشنیارکراو
Control and Automation Interface
The ADS7842EB is appropriate for a compact automation interface that reads four analog command or feedback signals and transfers 12-bit codes to control logic. Its parallel interface simplifies deterministic acquisition, and the 200 kSPS rate provides headroom for periodic monitoring loops. The internal multiplexer means channel switching and settling must be coordinated with conversion timing. For safety-related or high-energy installations, add suitable input protection and maintain separation between analog and digital return paths to reduce coupling.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS7842EB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS7842E | ADS7842EB/1K | ADS7842EB/1KG4 | ADS7842E/1KG4 |
|---|---|---|---|---|---|
| Package | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Input Channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Maximum Sampling Rate | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS |
| Digital Interface | 12-bit parallel output | 12-bit parallel output | 12-bit parallel output | 12-bit parallel output | 12-bit parallel output |
| Operating Temperature Range | -40°C to +85°C | Commercial-temperature grade | -40°C to +85°C | -40°C to +85°C | Commercial-temperature grade |
| Supply Architecture | Single supply | Single supply | Single supply | Single supply | Single supply |
| Ordering Format | ADS7842EB | Commercial-temperature ordering code | Tape-and-reel ordering code | Tape-and-reel ordering code | Commercial-temperature tape-and-reel ordering code |
| Signal-to-Noise and Distortion | 72 dB SINAD | 72 dB SINAD | 72 dB SINAD | 72 dB SINAD | 72 dB SINAD |
جیاکەرەوە سەرەکییەکان
- Industrial-temperature ADS7842 option (بەراورد بەADS7842E)
- Four-channel parallel conversion (بەراورد بەADS7844N)
- Production tape-and-reel ordering (بەراورد بەADS7842E)
تێبینییەکانی دیزاین
Place reference and input bypass capacitors close to their associated ADS7842EB pins, and route the four analog inputs away from the 12 parallel data outputs. Use a continuous analog ground region beneath the converter and analog signal path, then provide a deliberate connection to the system ground at the regulator or converter reference point. Short traces and controlled return paths reduce coupling between multiplexed inputs and fast digital switching.
Coordinate channel selection, acquisition, conversion, and output capture timing with the 200 kSPS maximum sampling rate. The internal multiplexer requires the selected analog input to settle before conversion; allow the datasheet-specified acquisition interval and account for multiplexer charge injection at each transition. A shared parallel bus also needs properly controlled tri-state behavior so disabled outputs do not fight an external device during bus handoff.
Do not treat the 12-bit resolution as a complete measurement-accuracy specification. Reference accuracy, source impedance, analog input range, filtering, channel settling, and PCB noise directly influence the final result. Confirm that the external reference remains within its permitted operating range and that the parallel output levels match the controller voltage. Also verify the exact temperature grade and ordering suffix before treating another ADS7842-family code as interchangeable.
The converter's specified 2 mW consumption is only one part of the analog subsystem power budget. Include the reference, input drivers, protection components, and logic-level interfaces when sizing regulators and battery capacity. Place supply decoupling where it can minimize loop area, and avoid routing high-current digital or switching paths across the analog input and reference region.
زانیاری پابەندبوون
The manufacturer and distributor descriptions identify the ADS7842EB as a RoHS-compliant, lead-free component. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified.