ADS7844N - 12-Bit 8-Channel SAR ADC | Texas Instruments
MPN: ADS7844N ✓ چالاکADS7844N گشتی
A sampling ADC, or successive-approximation-register ADC, converts an analog voltage into a digital code by sampling an input and comparing it with an internal reference through a sequence of approximations. The ADS7844N belongs to the broader ADC, data-converter, and semiconductor hierarchy, and is designed for applications requiring multiple analog measurements, programmable gain, and serial communication with a microcontroller or embedded control system.
Key features include 12-bit resolution, eight selectable channels, single-ended or differential input operation, a 200 kHz conversion rate, and an adjustable reference input that can range from 100 mV to VCC. The input voltage range follows the selected reference voltage, allowing the converter to be scaled for sensors, potentiometers, and low-voltage analog signals. The device also includes shutdown functionality to reduce power dissipation when conversions are not required.
The ADS7844N uses a synchronous serial interface with serial data output, clock input, chip select, and differential or single-ended input multiplexing. Its typical power dissipation is 3 mW when operating from a 5 V supply at a 200 kHz throughput rate. The reference voltage can be selected independently of the supply, which helps define the full-scale conversion range and improves flexibility when analog signals occupy only a portion of the converter input range.
Typical applications include resistive touch-screen controllers, industrial panel interfaces, portable measurement equipment, battery-powered instruments, data acquisition modules, and embedded control systems. A microcontroller can issue a conversion command, select the analog channel, and receive the resulting 12-bit value over the serial interface. In a touch-panel design, the converter can measure the X and Y voltages while its multiplexer and differential-capable inputs support front-end signal conditioning.
When laying out the ADS7844N, keep the analog input traces short, provide a stable reference bypass capacitor, and route serial clock and data traces away from sensitive analog inputs. The 20-pin SSOP package has no exposed pad, so thermal performance depends primarily on the PCB copper area, ambient temperature, and conversion workload. Confirm the complete pin-description table in the manufacturer datasheet before assigning PCB nets.
This page combines the official TI product information, the manufacturer ADS7844 data sheet, and cross-reference results to support component identification, comparison, sourcing, and board-level design. It also provides application guidance, pin-package references, and an explicit distinction between confirmed drop-in alternatives and devices that require functional rather than footprint-level review.
جێگرەوەکانی جێگۆڕکێ بۆ ADS7844N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7844N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Typical Power Dissipation, Resolution, Package, Architecture, Input Type.
ADS7844N/1KG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS7844N/1K
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS7844EB
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS7844E
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7844NB
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS7844N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 12 bit |
| Number of Channels | 8 channels |
| Input Configuration | 8 single-ended or 4 differential inputs |
| Conversion Rate | 200 kHz |
| ڤۆڵتیەی دابینکردن | Single supply, +5 V typical application |
| Reference Voltage Range | 100 mV to VCC |
| مەودای ڤۆڵتاژی ئینپوت | 0 V to VREF |
| Typical Power Dissipation | 3 mW at 200 kHz throughput and +5 V supply |
| ڕووکار | Synchronous serial interface |
| ADC Architecture | Sampling SAR ADC |
| Shutdown Mode | Yes |
| پاکێج | 20-pin SSOP |
| جۆری دامەزراندن | Surface mount |
| جۆری دەرچوون | Serial output |
| Product Description | 12-bit, 8-channel serial-output sampling ADC |
ڕێنمایی ڕێکخستنی پینی ADS7844N 20-pin ssop
ڕێکخستنی پین بۆ ADS7844N (پاکێجی 20-pin ssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7844N.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS7844N گونجاوە بۆ 6 بەکارھێنانs: Resistive Touch-Screen Interface, Industrial Data Acquisition, Portable Sensor Measurement, Battery-Powered Measurement Instrument, Test and Measurement Front End, Embedded Analog Control System.
Resistive Touch-Screen Interface
The ADS7844N fits resistive touch-screen control because it provides a 12-bit, 8-channel sampling ADC with a 200 kHz conversion rate and selectable single-ended or differential inputs. A controller can sequence the panel’s X and Y measurement channels, initiate conversions, and receive the results through the synchronous serial interface. Differential operation can help reject common-mode pickup present in long touch-panel wiring, while the adjustable 100 mV to VCC reference allows the analog range to be matched to the panel and front-end design. For robust implementation, keep the touch traces short, provide stable reference bypassing, and verify the channel timing shown in the manufacturer data sheet.
پێشنیارکراو
Industrial Data Acquisition
ADS7844N is suitable for industrial data-acquisition modules that must monitor several low-level analog inputs with a compact, serial-output ADC. Its 8-channel multiplexer supports eight single-ended inputs or four differential pairs, while 12-bit resolution provides 4096 codes across the selected 0 V to VREF range. The 200 kHz throughput permits multiple measurements while the synchronous interface conserves microcontroller I/O. Differential channels are especially useful for sensor bridges and process signals with common-mode voltage. Designers should select an appropriate reference, isolate analog routing from digital clock lines, and verify industrial temperature and compliance requirements against the exact ordering suffix.
پێشنیارکراو
Portable Sensor Measurement
The ADS7844N can serve portable instruments that combine resistive sensors with limited signal-conditioning space. Its 12-bit sampling architecture, selectable reference voltage, and single-supply operation simplify scaling of sensor outputs, while shutdown mode helps reduce consumption during idle periods. Four differential channels can monitor sensors whose useful signal is centered around a common-mode voltage, such as strain, pressure, or thermal bridges. The 20-pin SSOP footprint supports compact layouts, but analog trace routing and reference stability remain critical. Use short shielded or guarded sensor connections where appropriate, place bypass capacitors near the supply and reference pins, and confirm the device’s absolute input limits before connecting external circuitry.
پێشنیارکراو
Battery-Powered Measurement Instrument
ADS7844N is appropriate for battery-powered measurement equipment where analog multiplexing, compactness, and controllable energy use are important. The manufacturer reports typical power dissipation of 3 mW at a 200 kHz throughput rate with a 5 V supply, while the shutdown mode reduces consumption during inactive periods. The host controller can use the synchronous serial interface to request only the measurements required by the current operating state. A practical design should account for the converter’s supply current, regulator efficiency, reference noise, and wake-up requirements as a complete power budget. Keep the reference and analog inputs quiet, and avoid placing high-current switching paths adjacent to the converter.
پێشنیارکراو
Test and Measurement Front End
The ADS7844N can be used in a compact test or measurement front end when several analog test points must be digitized into an embedded controller. Its 200 kHz conversion rate and 12-bit resolution support general-purpose voltage acquisition, while differential input operation can improve signal integrity for measurements taken with unbalanced references. The serial interface reduces the number of host GPIO connections compared with a parallel ADC. Configure VREF to match the expected measurement range and source impedance, then allow the selected input to settle before starting conversion. Use the manufacturer timing diagram to account for channel selection and conversion latency, and maintain separate analog and return paths to minimize ground-potential errors.
پێشنیارکراو
Embedded Analog Control System
ADS7844N works well in an embedded analog control system where a microcontroller monitors analog process inputs and makes decisions based on sampled values. Eight single-ended channels can represent different setpoints or sensor outputs, while four differential channels support measurements referenced to a common return or bridge midpoint. The 12-bit code and programmable reference provide a flexible measurement scale, and the synchronous serial interface leaves the controller available for other control functions. For implementation, define the analog signal range before choosing VREF, use separate grounding techniques for sensitive inputs, and validate the sampling schedule against the required control-loop bandwidth. The exact device suffix and operating limits should also be checked for the deployment environment.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS7844N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS7844N/1KG4 | ADS7844N/1K | ADS7844EB | ADS7844E | ADS7844NB |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Number of Channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Interface | Synchronous serial output | Serial output | Serial output | Serial output | Serial output | Serial output |
جیاکەرەوە سەرەکییەکان
- Eight-channel multiplexing in a compact 20-pin SSOP (بەراورد بەADS7846E)
- Direct same-package ordering candidate (بەراورد بەADS7844N/1KG4)
- Flexible analog range through adjustable reference (بەراورد بەADS7844EB)
تێبینییەکانی دیزاین
Place the input bypass capacitor and reference bypass capacitor as close as practical to their corresponding pins, with short and direct traces. Route the analog inputs away from the serial clock and chip-select lines, and use a quiet ground return for reference and analog current. The 20-pin SSOP package requires careful escape routing; use the manufacturer land pattern and pin-description table when defining the PCB footprint.
Select VREF only after determining the maximum analog input voltage and the required resolution. According to the Texas Instruments ADS7844 product information, VREF can vary from 100 mV to VCC, and the input range follows 0 V to VREF. Use a low-noise, stable reference and the recommended bypass capacitor. Keep sensor returns and differential inputs paired to reduce common-mode pickup and ground-offset errors.
Do not treat every ADS7844-family suffix as automatically interchangeable. ADS7844N/1KG4 is explicitly listed as a 20-SSOP variant, while the manufacturer support discussion notes minor differences between ADS7844NB and ADS7844N. Before substitution, compare the ordering table, package drawing, electrical characteristics, pin descriptions, temperature range, and reference limits. A 16-pin ADS7846E is not a drop-in replacement because its pin count and feature set differ.
The typical dissipation of 3 mW applies to the manufacturer-described 200 kHz operation with a 5 V supply. Actual energy use depends on conversion rate, clock activity, supply voltage, and time spent in shutdown mode. For portable systems, estimate duty-cycle consumption, include the reference and external regulator efficiency, and confirm that the host controller can use shutdown to reduce average current.
زانیاری پابەندبوون
The verified excerpts identify the component, electrical architecture, package, and conversion specifications but do not state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.