ADS8344EB - 16-Bit 8-Channel 100-kSPS ADC | Texas Instruments
MPN: ADS8344EB ✓ چالاکADS8344EB گشتی
An ADC, or analog-to-digital converter, converts continuously varying analog voltages into numeric values for digital processing. The ADS8344 belongs to the sampling ADC hierarchy, using successive approximation to acquire one conversion per sample period. It is positioned as a precision data-acquisition converter for industrial measurement, instrumentation, and embedded control systems where 16-bit resolution and multiple input channels are useful.
Key characteristics include a maximum conversion throughput of 100 kSPS, 16-bit resolution, and eight single-ended inputs. The reference voltage can vary from 500 mV to VCC, allowing the input range to be scaled to the available supply. Typical power dissipation is 10 mW when operating from a 5 V supply at the full 100-kSPS throughput rate, and the specified operating-temperature range extends from -40 °C to +85 °C.
The device uses a synchronous serial interface for transferring conversion results to a microcontroller, DSP, or other digital controller. Its eight-channel multiplexing capability lets one converter serve several analog measurement points, reducing component count compared with using multiple single-channel converters. The architecture is intended for direct connection to embedded serial buses when clocking, chip select, and data framing can be managed by the host processor.
Typical applications include multichannel process monitoring, factory automation, industrial sensor interfaces, laboratory data acquisition, and embedded instrumentation. A practical design should account for analog settling time after channel selection, reference-source impedance, digital-interface timing, and PCB routing around sensitive analog inputs. The manufacturer's ADS8344 datasheet should be used for the complete pin-description table, electrical limits, timing diagrams, and recommended application circuit.
When comparing this converter with alternatives, confirm package geometry, pin functions, input architecture, reference limits, supply range, conversion rate, and serial-interface timing before replacing it. ADS8344EB is best suited to compact 16-bit multichannel acquisition designs that require an SSOP-20 footprint and single-ended input flexibility.
جێگرەوەکانی جێگۆڕکێ بۆ ADS8344EB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS8344EB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Typical Power Dissipation.
ADS8344E
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS8344EB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | Successive-approximation ADC (SAR) |
| وردی | 16 bit |
| Number of Channels | 8 channels |
| Maximum Sampling Rate | 100 kSPS |
| Input Configuration | 8 single-ended or 4 differential inputs |
| Input Signal Type | Single-ended |
| Supply Configuration | Single supply |
| Typical Power Dissipation | 10 mW at 5 V supply and 100 kSPS throughput |
| Reference Voltage Range | 500 mV to VCC |
| Signal-to-Noise plus Distortion | 84 dB |
| Digital Interface | Synchronous serial interface |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +85 °C |
| پاکێج | 20-pin SSOP |
| جۆری دامەزراندن | Surface mount |
| دۆخی RoHS | RoHS compliant |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی ADS8344EB 20-pin ssop
ڕێکخستنی پین بۆ ADS8344EB (پاکێجی 20-pin ssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS8344EB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS8344EB گونجاوە بۆ 6 بەکارھێنانs: Multichannel Industrial Process Monitoring, Precision Sensor Signal Acquisition, Laboratory Data-Acquisition System, Embedded Instrumentation Control, Factory Automation Control Module, Battery-Powered Remote Sensor Node.
Multichannel Industrial Process Monitoring
The ADS8344EB fits a multichannel process-monitoring system where several pressure, level, or temperature transducer signals must be digitized close to the sensing equipment. Its eight single-ended channels and 16-bit resolution provide a practical combination of measurement granularity and converter consolidation, while the 100-kSPS rate supports fast-changing process variables. The converter operates from a single supply and has typical power dissipation of 10 mW at a 5 V supply with 100-kSPS throughput, helping limit thermal loading in compact acquisition assemblies. In this design, the host processor controls channel selection, conversion timing, and synchronous serial data transfer. Engineers should allow the analog front end to settle after switching channels and should protect external sensor wiring against industrial transients before the signal reaches the ADC input.
Precision Sensor Signal Acquisition
The ADS8344EB is suitable for conditioning and digitizing outputs from precision sensors such as strain, pressure, potentiometric, and low-level industrial transducers. Its 16-bit resolution provides substantially finer code spacing than an 8-bit converter, while eight single-ended channels reduce the number of converters needed in a multi-sensor assembly. The adjustable reference range of 500 mV to VCC allows the measurement span to be matched more closely to the sensor and amplifier output, improving utilization of the converter's codes. For low-level signals, a low-noise reference and carefully grounded analog section remain important. The serial interface is practical for a microcontroller-based data logger, although the sampling controller must honor conversion timing and the manufacturer-specified input settling behavior.
Laboratory Data-Acquisition System
The ADS8344EB can serve as the central converter in a compact laboratory data-acquisition system that must capture several analog channels with 16-bit resolution. Eight multiplexed inputs reduce board area, and the 100-kSPS throughput is appropriate for many general-purpose bench measurements rather than high-speed waveform capture. A host microcontroller or DSP can receive conversion data through the synchronous serial interface, reducing parallel-bus routing and allowing synchronized acquisition of multiple channels. The analog section should include an appropriately buffered reference and protection suitable for the external signal range. Because the device offers 500 mV to VCC reference flexibility, the chosen reference also determines the input span and therefore the precision with which small laboratory signals are represented.
Embedded Instrumentation Control
The ADS8344EB fits embedded instrumentation where analog measurements feed control loops, status displays, or event records. Its single-supply operation and typical 10 mW dissipation at 5 V and 100-kSPS throughput simplify thermal planning in portable and cabinet-mounted equipment. The eight-channel multiplexing architecture is valuable when one instrument monitors several sensors, while 16-bit resolution supports fine measurement granularity. The synchronous serial interface allows a microcontroller or digital signal controller to manage conversions with deterministic timing and reduced wiring. A robust implementation should use the manufacturer timing diagrams to establish clock, chip-select, and data-valid relationships, and should separate analog return currents from digital clock and serial-data currents to avoid measurement errors.
Factory Automation Control Module
The ADS8344EB is appropriate for a factory automation module that must acquire several analog machine signals while communicating them to a controller. Sixteen-bit resolution is useful for actuator feedback, valve-position sensing, and analog process monitoring, and the 100-kSPS rate supports responsive sampling across eight inputs. Single-supply operation helps simplify the module's power architecture, while the synchronous serial interface minimizes connector count compared with a parallel ADC output. Industrial implementation details include surge protection, input filtering, fault isolation from switching regulators, and careful grounding between the analog and digital sections. The converter should be placed away from high-current switching nodes, and its reference should be decoupled according to the manufacturer application guidance to avoid conversion errors correlated with system activity.
Battery-Powered Remote Sensor Node
The ADS8344EB can be used in a battery-powered remote sensor node when eight analog measurements must be collected from a compact, low-power assembly. Its typical 10 mW dissipation at a 5 V supply and 100-kSPS throughput gives a defined operating point for battery-budget calculations, although actual consumption depends on supply voltage, conversion activity, and external circuitry. The 16-bit result width can reduce the need for averaging when signals are well conditioned, helping preserve measurement quality without excessive software filtering. The host microcontroller can power-gate surrounding analog circuitry and use the converter during scheduled acquisition windows. To extend battery life, use the lowest practical reference and supply voltages that still meet input range and accuracy requirements, and include local reference and supply decoupling near the device.
داتای سەرچاوەی ئەندازیاری بۆ ADS8344EB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS8344E |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | SSOP-20 | SSOP-20 |
| Resolution | 16 bit | 16 bit |
| Number of Channels | 8 channels | 8 channels |
| Maximum Sampling Rate | 100 kSPS | 100 kSPS |
| Input Configuration | 8 single-ended or 4 differential inputs | 8 single-ended or 4 differential inputs |
| Reference Voltage Range | 500 mV to VCC | 500 mV to VCC |
| Typical Power Dissipation | 10 mW at 5 V supply and 100 kSPS throughput | 10 mW at 5 V supply and 100 kSPS throughput |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C |
| Digital Interface | Synchronous serial interface | Synchronous serial interface |
| Signal-to-Noise plus Distortion | 84 dB | 84 dB |
| RoHS Status | RoHS compliant | RoHS compliant |
جیاکەرەوە سەرەکییەکان
- Eight-channel integration in a compact SSOP-20 converter (بەراورد بەADS7844N)
- Higher conversion resolution than the ADS7844 family (بەراورد بەADS7844N)
- Single-supply operation with a flexible reference range (بەراورد بەADS8345NB/1KG4)
تێبینییەکانی دیزاین
Place the reference and supply bypass capacitors close to their corresponding device pins, and keep the analog-input traces short and away from serial clock and digital-output traces. The SSOP-20 footprint requires fine-pitch routing, so use a manufacturer-approved land pattern and confirm the PCB soldermask and copper definitions during library validation. A solid ground plane should remain continuous beneath the converter where practical, while analog and digital return currents are kept from sharing high-current switching paths.
Treat the synchronous serial clock as a potentially fast edge even when conversion throughput is only 100 kSPS. Route clock and data as a controlled group, provide a continuous nearby ground reference, and avoid splitting the plane beneath the interface. Check setup and hold timing against the selected host clock and use the manufacturer timing diagrams as the source of truth. If the controller and ADC are separated by a cable or isolator, account for propagation delay and logic-level translation rather than assuming a direct point-to-point connection.
Do not treat a similarly packaged ADC as interchangeable solely from its outline or channel count. Confirm the pin names, analog-input range, reference limits, supply requirements, acquisition timing, and digital protocol for ADS8344EB before designing a replacement footprint. In multichannel measurements, allow the selected channel and its associated front end to settle before interpreting the conversion result. Keeping the reference stable and well decoupled is also essential because reference variation can appear directly as gain and offset error.
Use the stated 10 mW typical dissipation at 5 V and 100-kSPS as the initial thermal estimate, then recalculate with the actual supply, conversion rate, and adjacent heat sources. At 10 mW, the converter's contribution to local temperature rise is generally modest, but the SSOP-20 lead pitch limits heat-flow area and package placement matters in densely assembled boards. Avoid enclosing the device in a thermally stagnant pocket and follow the manufacturer's PCB-layout guidance for exposed thermal management where applicable.
زانیاری پابەندبوون
RoHS compliance is identified by the Mouser product listing. The available product information does not establish REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.