ADS8343E - 16-Bit, 4-Channel ADC | Texas Instruments
MPN: ADS8343E ✓ چالاکADS8343E گشتی
A sampling ADC is a data-converter category that uses a sample-and-hold circuit and successive-approximation conversion to translate an analog voltage into a digital code. Within the broader semiconductor hierarchy, the ADS8343E belongs to the ADC and DAC family of data-converter integrated circuits. Its onboard input multiplexer reduces the need for separate analog switching when several sensors or measurement nodes must be digitized by one converter.
The ADS8343E provides 86 dB SINAD at a 100 kSPS throughput rate and accepts bipolar input signals. Its reference voltage can be adjusted from 500 mV to VCC/2, providing a corresponding input range of ±VREF. The serial interface also supports economical galvanic isolation when the converter is placed on the isolated side of a measurement system. A shutdown mode reduces power dissipation when conversion is not required.
Typical power dissipation is 8 mW at 100 kSPS with a 5 V supply, making the converter suitable for portable and battery-operated instrumentation. The operating temperature range is −40 °C to +85 °C. Unlike flash or pipeline ADCs, this successive-approximation sampling architecture combines low power, compactness, and a straightforward serial interface for low-rate, high-resolution measurements.
The ADS8343E is well suited to portable data loggers, personal digital assistant equipment, multichannel measurement instruments, isolated remote data-acquisition systems, sensor-interface circuits, and industrial process-monitoring equipment. Four multiplexed channels allow one converter to service several analog sources while reducing converter count, board area, and data-acquisition system complexity.
When designing around the ADS8343E, select the external reference carefully because VREF determines the bipolar input span. Preserve the supply and reference bypass-capacitor placement recommended by the manufacturer datasheet, and treat the serial interface timing and digital return path as part of the analog measurement design. The serial interface can provide low-cost isolation, but grounding and interface isolation must be planned around the complete measurement chain.
This product page consolidates the key ADC specifications, pin-compatible alternatives, comparative parameters, and practical design guidance into one engineering-focused reference. It supports faster component selection while preserving the distinction between exact ordering variants, pin-compatible family options, and application-level trade-offs.
جێگرەوەکانی جێگۆڕکێ بۆ ADS8343E — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS8343E (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Typical Power Dissipation, Number of Input Channels, Input Range, Package, Resolution.
ADS8341E
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7841E
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS8343E/2K5
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS8343EG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS8343EB/2K5G4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS8343E زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| ADC Type | Successive-approximation sampling ADC |
| وردی | 16 bit |
| Conversion Rate | 100 kSPS |
| Total Input Channels | 4 channels |
| Single-Ended Input Configuration | 4 channels |
| Differential Input Configuration | 2 channels |
| Signal-to-Noise and Distortion | 86 dB SINAD |
| Input Range | Bipolar, ±VREF |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Reference Voltage Range | 500 mV to VCC/2 |
| Typical Power Dissipation | 8 mW at 100 kSPS and 5 V supply |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +85 °C |
| پاکێج | 16-pin SSOP |
| جۆری دامەزراندن | Surface mount |
| جۆری ڕووکار | Serial interface |
| Shutdown Mode | Yes |
| Input Multiplexer | Onboard 4-channel multiplexer |
| Pin Compatibility | Pin-for-pin compatible with ADS7841 and ADS8341 |
ڕێنمایی ڕێکخستنی پینی ADS8343E 16-pin ssop
ڕێکخستنی پین بۆ ADS8343E (پاکێجی 16-pin ssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS8343E.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS8343E گونجاوە بۆ 6 بەکارھێنانs: Portable Multichannel Data Logger, Isolated Remote Data Acquisition, Industrial Process Measurement, Battery-Powered Sensor Interface, Precision Measurement Instrument, Personal Digital Assistant Equipment.
Portable Multichannel Data Logger
The ADS8343E fits portable data loggers that monitor several low-bandwidth sensors from one compact converter. Its four-channel single-ended input configuration reduces the number of separate ADCs required, while the onboard multiplexer selects each source in turn. The 16-bit resolution supports detailed measurements, and the 100 kSPS conversion rate provides more than enough throughput for temperature, pressure, position, and environmental sensors. Operation from a 2.7 V to 5.25 V single supply also permits use with common portable rails. The principal design constraint is power budget: the converter dissipates 8 mW typically at 100 kSPS and 5 V before external-reference and sensor loading are included.
پێشنیارکراو
Isolated Remote Data Acquisition
The ADS8343E is appropriate for remote acquisition systems in which the analog measurement front end must communicate across an isolation barrier. Its serial interface permits the ADC to operate on the isolated side while digital data is transferred through an isolation solution, supporting the low-cost isolation arrangement described by Texas Instruments. Four multiplexed inputs let an isolated module measure several sensors without duplicating converter circuitry. With 16-bit resolution, 86 dB SINAD, and a 100 kSPS maximum conversion rate, the device handles precision process and instrumentation signals. Designers must still account for isolated power, barrier capacitance, serial timing, grounding, and safety requirements beyond the ADC itself.
پێشنیارکراو
Industrial Process Measurement
The ADS8343E suits industrial process measurement when several slowly changing analog signals must be digitized accurately in a compact instrument. Four single-ended inputs or two differential pairs support pressure, level, temperature, and current-sense channels, while the differential option can improve rejection of common-mode noise on paired sensor signals. The 16-bit conversion resolution preserves small signal detail, and the 100 kSPS throughput permits multichannel scanning without excessive delay. The 2.7 V to 5.25 V supply range accommodates embedded control systems. Reference stability, input settling time, channel-multiplexer acquisition time, and isolation strategy should be evaluated together to determine the achievable system accuracy.
پێشنیارکراو
Battery-Powered Sensor Interface
The ADS8343E supports battery-powered sensor interfaces that require more resolution than a low-power mixed-signal MCU ADC may provide. It can digitize four single-ended sensor outputs at up to 100 kSPS with 16-bit resolution, allowing the host processor to handle calibration, filtering, and data storage. A 2.7 V minimum supply voltage supports 3.3 V systems, and shutdown mode reduces consumption during inactive intervals. Typical converter dissipation is 8 mW at 100 kSPS with a 5 V supply, but actual energy per sample depends on conversion rate, reference implementation, sensor load, and duty cycle. Low-leakage components and careful analog filtering are important when extending battery life.
پێشنیارکراو
Precision Measurement Instrument
The ADS8343E is useful in bench instruments and portable analyzers that combine several measurement inputs with compact serial connectivity. Its 86 dB SINAD provides a defined dynamic-performance figure at the 100 kSPS operating point, while 16-bit resolution allows small signal changes to be represented accurately. The four-channel multiplexer makes the converter appropriate for mixed sensor panels, and the adjustable reference from 500 mV to VCC/2 allows the analog range to be matched to the measured quantity. For highest accuracy, use a low-noise reference, minimize switching noise around the analog inputs, and follow the manufacturer acquisition and layout guidelines. The serial interface reduces board wiring compared with a parallel ADC.
پێشنیارکراو
Personal Digital Assistant Equipment
The ADS8343E was designed with portable personal digital assistant equipment in mind, where multiple analog channels, low power, and limited board area are central requirements. Four multiplexed inputs can serve accessory or sensor connections through one converter, while the serial interface limits the number of PCB traces. The device operates from a single supply as low as 2.7 V, and its shutdown function helps conserve energy when measurements are not continuous. Typical dissipation is 8 mW at 100 kSPS and 5 V, enabling a practical duty-cycled acquisition strategy. Product-level accuracy still depends on the external reference, input filtering, sensor excitation, and system calibration, so the converter should be paired with stable analog front-end components.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS8343E — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS8341E | ADS7841E | ADS8343E/2K5 | ADS8343EG4 | ADS8343EB/2K5G4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Conversion Rate | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS |
| Input Channels | 4 single-ended or 2 differential channels | 1 channel | 4 single-ended channels | 4 single-ended or 2 differential channels | 4 single-ended or 2 differential channels | 4 single-ended or 2 differential channels |
جیاکەرەوە سەرەکییەکان
- Broader input configuration than the single-channel pin-compatible option (بەراورد بەADS8341E)
- Differential-input capability extends beyond the ADS7841E configuration (بەراورد بەADS7841E)
- Identical core conversion performance across ordering options (بەراورد بەADS8343E/2K5)
- Defined precision and low-power operating characteristics (بەراورد بەADS7841E)
تێبینییەکانی دیزاین
Place the ADS8343E supply and reference bypass capacitors close to the corresponding pins, and route analog input and VREF traces away from the serial clock, serial data, and switching-supply paths. The input multiplexer and reference network are part of the precision signal chain, so long copper runs can increase pickup and settling error. Follow the pin-description table and recommended layout in the manufacturer datasheet, especially when operating near the 500 mV minimum reference limit.
Do not assume that a pin-compatible ADC is automatically a functional replacement. The ADS8341E has one input channel, while the ADS8343E supports four single-ended or two differential channels, and ADS7841E provides four single-ended channels without the same differential configuration. Verify acquisition time, serial timing, reference range, input range, and channel count in the manufacturer datasheet before replacing the target in an existing design.
Estimated: using the manufacturer typical value of 8 mW at 100 kSPS with a 5 V supply, operation for 1 second at a continuous 100 kSPS conversion rate consumes approximately 8 mJ of converter energy. Shutdown can reduce consumption between measurement bursts, but the external reference, isolation interface, sensors, and host processor are not included. Base the final battery budget on the actual sample rate and duty cycle rather than the maximum throughput alone.
Treat the serial clock as a potential source of switching noise near sensitive analog inputs, and follow the serial-interface timing limits in the manufacturer datasheet. For remote acquisition, the serial interface supports a low-cost isolation architecture, but the isolation barrier, isolated supply, grounding, and channel-settling strategy require system-level validation. Confirm that the selected ADS8343 ordering option has the same 16-pin SSOP pinout as the original design.
زانیاری پابەندبوون
The Texas Instruments product information identifies RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status only when those attributes are shown for the selected orderable part. No definitive status should be inferred from the family datasheet alone.