Texas Instruments

PCM1755DBQ - 24-Bit 106dB Stereo DAC | Texas Instruments

MPN: PCM1755DBQ ✓ چالاک
5 V Vdss 16-pin SSOP Package
MOQ: 1 |

PCM1755DBQ گشتی

The Texas Instruments PCM1755DBQ is a 24-bit stereo audio digital-to-analog converter with a maximum sampling rate of 200 kHz, 106 dB SNR, and software-programmable controls in a 16-pin SSOP package. It converts two-channel I2S audio into a full-scale analog output of 4 VPP, making it suitable for high-resolution audio equipment.

An audio DAC is the final conversion stage in a digital audio signal chain. It receives sampled and encoded audio from a digital processor, reconstructs the analog voltage waveform, and drives an audio amplifier, mixer, headphone stage, or line output. PCM1755DBQ belongs to the stereo DAC, audio converter, interface IC, and semiconductor hierarchy, with a software-control interface supporting programmable operating functions.

The converter delivers 24-bit resolution with 106 dB typical SNR and 0.002% typical THD+N when operated from a 5 V supply. Its 4 VPP typical full-scale output provides useful headroom for subsequent analog stages. A four-times or eight-times oversampling digital filter and -50 dB stop-band attenuation help reject out-of-band content before the analog output stage.

PCM175x uses TI's enhanced multilevel delta-sigma architecture with fourth-order noise shaping and eight-level amplitude quantization. This architecture improves clock-jitter tolerance while maintaining high audio resolution. The PCM1755 can operate under hardware control or through a three-wire serial port that provides register-write access to user-programmable functions.

Typical uses include professional audio equipment, digital mixers, multichannel sound systems, home-theater receivers, active speakers, and USB or network audio playback platforms. The converter is particularly useful where two low-noise analog channels are required but a conventional stereo DAC implementation would be unnecessarily complex.

The primary design consideration is clean, stable power for the converter and careful routing of digital clock and data signals away from the analog outputs. Follow the manufacturer datasheet for the pin-description table, recommended decoupling network, analog output implementation, and supported serial-control configuration.

This product page consolidates the PCM1755DBQ specifications, sourcing information, application guidance, and verified drop-in alternatives. It also provides practical design notes for clocking, filtering, power, and output implementation that help engineers evaluate the converter before completing a board-level audio design.

جێگرەوەکانی جێگۆڕکێ بۆ PCM1755DBQ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PCM1755DBQ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Control Interface, Dynamic Range, Maximum Sampling Rate, Package, Signal-to-Noise Ratio.

Texas Instruments
Control Interface: 3-wire serial control port with register-write functions
Dynamic Range: 106 dB at VCC = 5 V
Maximum Sampling Rate: 192 kHz
بەراوردکردن لەگەڵ PCM1755DBQ →

PCM1755DBQG4

✅ جێگرەوەی ڕاستەوخۆ
📦 16-pin SSOP
Same 24-bit stereo PCM1755 conversion class and 16-pin SSOP footprint; G4 ordering suffix denotes a distinct manufacturer ordering variant with no quantified electrical difference in the available data.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCM1754DBQ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 16-pin SSOP
Uses the same 24-bit stereo PCM175x family and 16-pin SSOP format; PCM1755DBQ is specified at 106 dB SNR and 0.002% THD+N, while PCM1754 performance values are not quantified in the available data.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCM1754DBQG4

✅ جێگرەوەی ڕاستەوخۆ
📦 16-pin SSOP
Shares the PCM1754 24-bit stereo 16-pin SSOP implementation; PCM1755DBQ provides documented 106 dB SNR and 0.002% THD+N, while the exact PCM1754 deltas are not quantified.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCM1753DBQ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Texas Instruments
📦 16-pin SSOP
24 bit · 192 kHz · 106 dB typical · 106 dB at VCC = 5 V · 0.002% typical at VCC = 5 V · 4 VPP typical · 4-times or 8-times · -50 dB

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PCM1755DBQ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type Stereo audio digital-to-analog converter (DAC)
وردی 24 bit
Number of Channels 2 channels
Maximum Sampling Rate 200 kHz
Digital Audio Interface I2S
Signal-to-Noise Ratio 106 dB typical at 5 V
Dynamic Range 106 dB at 5 V
Total Harmonic Distortion plus Noise 0.002% typical at 5 V
Full-Scale Output 4 VPP typical
Digital Filter Oversampling Ratio 4x or 8x
Stop-Band Attenuation -50 dB
Architecture Enhanced multilevel delta-sigma with fourth-order noise shaping and eight-level amplitude quantization
Control Interface Three-wire serial control port with register-write functions
ڤۆڵتیەی دابینکردن 5 V
پاکێج 16-pin SSOP
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی PCM1755DBQ 16-pin ssop

ڕێکخستنی پین بۆ PCM1755DBQ (پاکێجی 16-pin ssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 16-pin ssop بۆ PCM1755DBQ

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PCM1755DBQ.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PCM1755DBQ گونجاوە بۆ 6 بەکارھێنانs: Digital Mixing Console, Professional Audio Monitor, Home-Theater Receiver, Active Speaker USB DAC, Multichannel Sound System, Recording and Broadcast Equipment.

🎧

Digital Mixing Console

PCM1755DBQ fits a digital mixing console because it converts two 24-bit audio channels into analog line-level signals while supporting sampling rates up to 200 kHz. Its 106 dB typical SNR and 0.002% typical THD+N provide useful dynamic-range margin for mix-bus and monitor paths. The converter can accept I2S data from an audio DSP, while its software-control port supports programmable operating functions. A typical signal chain uses the DAC outputs as the bridge between the digital mixer matrix and analog line amplifiers. Because the available full-scale output is 4 VPP, downstream amplifier gain and headroom must be planned around that level. Keep the I2S clock and data traces away from the analog outputs to preserve the converter's noise and distortion performance.

🎧

Professional Audio Monitor

PCM1755DBQ is appropriate for a two-channel powered monitor when the source is digital and a high-quality stereo reconstruction is required. The 24-bit resolution preserves detailed digital source information, while the 200 kHz sampling capability supports high-rate multichannel workflows. The converter's 106 dB typical dynamic range and 0.002% typical THD+N help maintain a low noise and distortion floor before the power amplifier. The 4 VPP typical output should drive the monitor's input stage through the network recommended in the manufacturer datasheet. Separating digital clocking and I2S routing from the analog output section is especially important because switching artifacts can become audible in nearfield monitoring systems.

📺

Home-Theater Receiver

PCM1755DBQ can serve as a stereo auxiliary or main-channel DAC in a home-theater receiver that accepts digital audio from an HDMI or network-audio processor. Its two-channel 24-bit architecture covers left and right channels, and its support for sampling rates up to 200 kHz accommodates high-resolution audio streams after appropriate format conversion. The typical 106 dB SNR provides a useful dynamic-range budget for cinematic and music playback. Use the three-wire serial interface when programmable behavior is required, or hardware mode where the application needs simpler control. The receiver's analog volume-control and line-output circuitry must accommodate the 4 VPP full-scale output without clipping and should follow the converter's recommended output network.

🖥️

Active Speaker USB DAC

PCM1755DBQ is suitable for an active-speaker USB or network-audio DAC card because it provides a compact two-channel bridge from digital audio data to analog speaker input. A 24-bit converter with 200 kHz maximum sampling rate supports common high-resolution playback formats after the host formats the data correctly. The 106 dB typical SNR and 0.002% typical THD+N are beneficial in a quiet listening environment where the converter's own noise can be exposed by efficient speakers. A dual audio amplifier can follow the DAC, but its gain must match the 4 VPP typical converter output. Place the 5 V decoupling network close to the device and isolate the analog output routing from USB data, clocks, and switching regulators.

🌐

Multichannel Sound System

PCM1755DBQ can contribute two channels to a multichannel sound system by deploying multiple stereo converter instances for front, surround, or height-speaker pairs. Its 24-bit processing and support for sampling rates up to 200 kHz allow it to accept high-rate digital audio channels after system routing. The 106 dB typical dynamic range supports consistent channel-to-channel performance, while the 0.002% typical THD+N specification helps avoid adding audible distortion in distributed speaker installations. Each converter requires synchronized clock and serial-data routing to prevent channel timing errors. Keep each device's analog section compact and use a common, quiet power strategy, while observing the manufacturer's grounding and decoupling recommendations around every SSOP.

🏭

Recording and Broadcast Equipment

PCM1755DBQ is appropriate for playback and monitoring paths in recording or broadcast equipment that require a compact, high-resolution stereo DAC. Its 200 kHz maximum sampling rate supports high-rate studio workflows, while the typical 106 dB SNR and 0.002% THD+N support transparent reconstruction of the digital source. The three-wire serial port allows software-addressable configuration when a host processor needs programmable functions. Analog monitoring paths should account for the converter's 4 VPP full-scale output and terminate them through the documented output network. In a studio environment, keep clock jitter and power-supply noise under control by following the recommended reference layout, using a stable 5 V rail, and isolating digital return currents from the analog output region.

کورتەی بەرهەمە پێشنیارکراوەکان

PCM1753 Same-family 24-bit stereo DAC بەکارهێنراوە لە: Digital Mixing Console, Home-Theater Receiver, Multichannel Sound System PCM1754 Same-family 24-bit stereo DAC بەکارهێنراوە لە: Digital Mixing Console, Professional Audio Monitor, Home-Theater Receiver, Active Speaker USB DAC, Multichannel Sound System, Recording and Broadcast Equipment OPA2134 Low-noise dual audio operational amplifier بەکارهێنراوە لە: Digital Mixing Console, Professional Audio Monitor, Home-Theater Receiver, Active Speaker USB DAC, Multichannel Sound System, Recording and Broadcast Equipment PCM1755 Functionally identical base device بەکارهێنراوە لە: Professional Audio Monitor, Active Speaker USB DAC, Recording and Broadcast Equipment
What is the PCM1755DBQ?
The PCM1755DBQ is a Texas Instruments 24-bit, dual-channel audio digital-to-analog converter designed for high-resolution stereo audio systems. It accepts I2S data and supports sampling rates up to 200 kHz, with typical dynamic range of 106 dB, SNR of 106 dB, and THD+N of 0.002% at a 5 V supply. According to the Texas Instruments PCM1755 product page, the device provides 4 VPP typical full-scale output and can be configured through a three-wire serial control port.
Where can I download the PCM1755DBQ datasheet PDF?
The official PCM1755DBQ datasheet can be obtained from the Texas Instruments PCM1755 product page at https://www.ti.com/product/PCM1755 or through the manufacturer document link at https://www.ti.com/lit/gpn/pcm1755. The document defines the 16-pin SSOP pinout, electrical characteristics, digital interface, software-control registers, application circuit, and recommended implementation. Use the manufacturer version when assigning PCB nets or calculating analog-output component values.
Where can I find the PCM1755DBQ pinout?
The PCM1755DBQ pin assignment is documented in the pin-description table in the official Texas Instruments PCM1755 datasheet. The device is a 16-pin SSOP and includes power, ground, digital audio, control, clock, and analog-output connections. Because the exact manufacturer naming convention for every terminal is needed during PCB layout, use the datasheet pin-description table rather than inferring functions from neighboring pins.
What are the key specifications of PCM1755DBQ that engineers should know?
The PCM1755DBQ combines 24-bit resolution, dual-channel conversion, and a maximum sampling rate of 200 kHz in a 16-pin SSOP. According to the Texas Instruments PCM1755 product page and datasheet, typical performance at 5 V includes 106 dB SNR, 106 dB dynamic range, and 0.002% THD+N. The device also provides a 4 VPP typical full-scale output, 4x or 8x digital-filter oversampling, and -50 dB stop-band attenuation.
Can PCM1755DBQ replace PCM1754DBQ?
PCM1754DBQ can serve as a close same-family alternative when its control requirements match the target application. The PCM175x family shares the 24-bit stereo converter architecture and 16-pin SSOP format, while PCM1755DBQ provides 106 dB SNR and 0.002% typical THD+N at 5 V. Confirm the required operating mode, register behavior, analog output implementation, and every pin function against the manufacturer datasheets before treating the substitution as drop-in.
What is the best Texas Instruments equivalent for PCM1755DBQ?
PCM1755DBQG4 is the closest same-package Texas Instruments alternative because it retains the 24-bit PCM1755 conversion format in a 16-pin SSOP package. The PCM1754DBQ and PCM1754DBQG4 are additional family alternatives, but they may not provide identical software-control behavior or performance in every operating mode. Confirm register compatibility, clock requirements, and analog output specifications before finalizing a replacement.
Is there a verified cross-brand drop-in replacement for PCM1755DBQ?
No verified cross-brand, pin-compatible replacement for PCM1755DBQ is identified in the available component cross-reference information. A valid drop-in alternative must match the 16-pin SSOP footprint, I2S interface, 5 V supply, 24-bit stereo conversion class, output configuration, and control behavior. Cross-reference tools can identify parametrically similar parts, but similarity alone does not establish pin-to-pin compatibility for this mixed-signal audio converter.
When should I choose PCM1755DBQ over PCM1754DBQ?
Choose PCM1755DBQ when the design benefits from the 106 dB typical SNR and 0.002% typical THD+N figures associated with the PCM1755 performance class. PCM1754DBQ may be appropriate when its documented dynamic range, distortion, and software-control functions satisfy the application. Both devices belong to the 24-bit stereo PCM175x family and use a 16-pin SSOP, but feature-level and control compatibility must be checked in the manufacturer datasheets.
Is PCM1755DBQ suitable for professional audio equipment?
PCM1755DBQ is suitable for professional and high-fidelity audio designs that need two 24-bit analog outputs at up to 200 kHz sampling. Typical specifications include 106 dB SNR, 106 dB dynamic range, 0.002% THD+N, and 4 VPP full-scale output at 5 V. Professional applications include digital mixers, multichannel monitoring, active speaker electronics, and broadcast or recording equipment requiring deterministic digital-to-analog conversion.
What clock and interface considerations apply to PCM1755DBQ?
PCM1755DBQ accepts I2S digital audio data and requires a correctly sourced system and sampling clock for stable conversion. The enhanced multilevel delta-sigma architecture uses fourth-order noise shaping and eight-level amplitude quantization to improve clock-jitter tolerance. Keep the data, clock, and serial-control routing away from the analog output region, use controlled-impedance routing where appropriate, and follow the manufacturer application circuit for the exact supported clock configuration.
How should the analog output of PCM1755DBQ be implemented?
The PCM1755DBQ provides a typical 4 VPP full-scale output, so the analog stage should be designed around that range and the voltage tolerances of the following amplifier or mixer. Use the output network and decoupling arrangement specified in the manufacturer datasheet, maintain short analog traces, and provide a stable low-noise 5 V supply. An external op-amp such as the OPA2134 may be used where additional voltage gain, filtering, or output-drive capability is required.
What are the power and layout considerations for PCM1755DBQ?
A stable 5 V supply and careful mixed-signal layout are the primary implementation requirements for PCM1755DBQ. Place power-decoupling components close to the device and keep switching supplies, digital clocks, and high-current outputs away from the analog output pins. The converter is a digital IC rather than a power semiconductor, so a safe-operating-area chart does not apply; thermal design instead focuses on supply dissipation, copper area, and nearby heat sources.
Is PCM1755DBQ currently in production?
PCM1755DBQ is presented as an active Texas Instruments product with a manufacturer product page, part-details entry, and current ordering resources. The part belongs to the PCM175x 24-bit, 192-kHz-sampling enhanced multilevel delta-sigma DAC family. For production planning, use the Request a Quote form on this page for current commercial availability, minimum order quantity, and delivery scheduling.
Where can I buy PCM1755DBQ online?
Use the Request a Quote form on this page to request PCM1755DBQ availability, current lead time, minimum order quantity, and commercial terms. The form is the appropriate purchasing channel for this listing and avoids publishing a static price that may become obsolete. Engineers should also confirm the exact DBQ ordering suffix and 16-pin SSOP package during the request.
What is the price of PCM1755DBQ?
The current commercial price of PCM1755DBQ is best obtained through the Request a Quote form on this page. The quoted amount can reflect quantity, supply status, and current market conditions, so it should not be replaced by a historical catalog figure. The form also allows buyers to request the required quantity, packaging information, lead time, and delivery terms in one response.
What is the lead time and stock status for PCM1755DBQ?
Current stock and lead-time status for PCM1755DBQ should be requested through the Request a Quote form on this page. Enter the required quantity and manufacturing schedule so the supplier can confirm available supply, factory lead time, and any quantity constraints. A listing alone does not guarantee immediate stock, particularly when different order quantities or delivery schedules are required.

داتای سەرچاوەی ئەندازیاری بۆ PCM1755DBQ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PCM1755DBQ for a high-resolution stereo audio path that requires 24-bit conversion, I2S input, operation from 5 V, sampling rates up to 200 kHz, and documented performance of 106 dB SNR with 0.002% THD+N. PCM1755DBQG4 is the closest same-package ordering alternative and should be preferred when its ordering and environmental requirements match the production design. Consider PCM1754DBQ or PCM1754DBQG4 only after checking noise, distortion, register behavior, clocking, and analog-output compatibility against the application requirements. PCM1753DBQ is suitable only when its particular performance and pin-5 behavior meet the design, because a shared PCM175x footprint does not guarantee identical functionality. No verified cross-brand drop-in replacement was identified, so a second-source decision requires a separate package, pin, control, and signal-performance review rather than reliance on generic parametric similarity.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PCM1755DBQG4 PCM1754DBQ PCM1754DBQG4 PCM1753DBQ
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
Device Type Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC
Resolution 24 bit 24 bit 24 bit 24 bit 24 bit

جیاکەرەوە سەرەکییەکان

  • Documented high-resolution performance (بەراورد بەPCM1754DBQ)
  • High-rate stereo conversion (بەراورد بەPCM1753DBQ)
  • Programmable control in a 16-pin SSOP (بەراورد بەPCM1754DBQG4)
  • Directly compatible ordering variant (بەراورد بەPCM1755DBQG4)

تێبینییەکانی دیزاین

PCM1755DBQ operates from a 5 V supply, so the converter should be connected to a low-noise rail with local high-frequency decoupling placed directly at the supply and ground pins. Use the capacitor values and grounding arrangement specified in the manufacturer application circuit. Keep switching-regulator loops and inductor nodes away from the analog output section because supply ripple can degrade the converter's 106 dB typical SNR and 0.002% typical THD+N performance.

Separate the I2S data, sampling-clock, and serial-control routes from the analog output traces. Route clocks away from OUTA and OUTB, use a continuous ground reference, and avoid running digital signals beneath the analog outputs or the associated passive components. The SSOP footprint is fine-pitch, so verify pin-one orientation and every net against the manufacturer pin-description table before fabrication.

Clock quality directly affects digital-to-analog reconstruction, even though the enhanced multilevel delta-sigma architecture improves jitter tolerance. Deliver the supported system and sampling clocks from a low-jitter source, observe the timing limits in the manufacturer datasheet, and avoid adding unnecessary buffers or long stubs between the audio processor and PCM1755DBQ. Validate the complete interface with an oscilloscope or audio analyzer after layout.

Do not treat a same-package family member as interchangeable without checking software-control registers, pin 5 behavior, clock requirements, and output circuitry. PCM1755DBQG4 is the closest ordering variant, while PCM1754DBQ and PCM1753DBQ can differ in performance or control behavior. Confirm the exact function of all 16 pins and the external analog network against the relevant manufacturer datasheet before substituting a part.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance details are not stated in the available manufacturer and distributor information. The G4 ordering suffix is shown for PCM1755DBQG4, but it is not interpreted here as proof of a specific compliance declaration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-20 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PCM1755DBQ datasheet PCM1755DBQ pinout PCM1755DBQ datasheet pdf PCM1755DBQ price PCM1755DBQ equivalent PCM1755DBQ replacement PCM1755DBQ cross reference PCM1755DBQ vs PCM1754DBQ PCM1755DBQ SSOP-16 Texas Instruments PCM1755DBQ PCM1755DBQ application circuit PCM1755 24-bit stereo DAC PCM1755DBQ stock PCM1755DBQ 200kHz I2S what can replace PCM1755DBQ

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments PCM1755DBQ PCM1755DBQG4 PCM1754DBQ PCM1754DBQG4 PCM1753DBQ PCM1755 PCM175x stereo audio DAC digital-to-analog converter audio converter IC delta-sigma converter I2S 24-bit resolution 106 dB SNR 0.002% THD+N 200 kHz sampling rate fourth-order noise shaping eight-level amplitude quantization clock jitter tolerance three-wire serial control 16-pin SSOP surface-mount package OPA2134 4 VPP full-scale output
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ