ADV7183BKSTZ - 10-Bit Multiformat Video Decoder | Analog Devices
MPN: ADV7183BKSTZ ✓ چالاکADV7183BKSTZ گشتی
An analog video decoder is an interface IC that bridges legacy composite or component television signals and digital video processing systems. Its signal path includes analog-to-digital conversion, automatic format and standard detection, color demodulation, timing recovery, and digital pixel output. The ADV7183BKSTZ belongs to the video-decoder hierarchy within interface converters, mixed-signal semiconductors, and broader video-processing systems.
The principal features include automatic detection of NTSC, PAL, and SECAM standards, three 10-bit ADCs clocked from a single 27 MHz crystal, 4:2:2 component-video generation, and a flexible digital output interface. The B revision represented by this device improves performance for noisy or weak input signals and VCR locking while retaining the multiformat decoding architecture. Operation from a single 27 MHz crystal supports a compact analog front end without multiple independent sampling clocks.
Internally, the decoder separates synchronization, luminance, and chroma processing before presenting digital component data. Automatic standard detection reduces configuration effort because the same decoder can accommodate multiple regional television systems. The three parallel converters sample the analog input channels consistently, while the clocking architecture supports a unified conversion and timing domain. Its digital interface can feed downstream frame buffers, image processors, scalers, recorders, or display controllers.
Typical uses include analog surveillance-camera systems, video recorders, projectors, broadcast equipment, consumer television sets, and industrial vision equipment. It is particularly useful where an installation must accept NTSC, PAL, or SECAM composite input without requiring separate decoder hardware for each standard. The decoded output can be processed by a host FPGA, ASIC, image-processing pipeline, or dedicated video controller.
Design the analog input path carefully because composite video performance depends on source impedance, termination, filtering, ground continuity, and connector layout. Keep the crystal and associated decoupling close to the device, follow the pin-description table for supply and ground assignment, and route high-speed digital outputs with controlled impedance. Verify timing, color, and synchronization behavior across every required television standard.
This page combines the verified product identity, multiformat decoding capabilities, interface role, and application guidance with practical design notes. It also distinguishes the documented ADV7183B feature set from the earlier ADV7183 description and identifies the package and sourcing details needed for engineering review.
جێگرەوەکانی جێگۆڕکێ بۆ ADV7183BKSTZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەADV7183BKSTZ تایبەتمەندییەکان
| Product Type | Integrated multiformat analog video decoder |
| Supported Video Standards | NTSC, PAL, and SECAM |
| ADC Resolution | 10 bit |
| ADC Count | 3 integrated ADCs |
| ADC Sampling Rate | 54 MHz per ADC |
| System Clock | 27 MHz crystal |
| Output Pixel Format | 4:2:2 component video |
| Digital Output Compatibility | CCIR601 and CCIR656 |
| Input Signal Type | Standard analog baseband television signal |
| پاکێج | 80-lead LQFP, 14 mm x 14 mm |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی ADV7183BKSTZ 80-lead lqfp, 14 mm x 14 mm
ڕێکخستنی پین بۆ ADV7183BKSTZ (پاکێجی 80-lead lqfp, 14 mm x 14 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADV7183BKSTZ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADV7183BKSTZ گونجاوە بۆ 6 بەکارھێنانs: Analog Surveillance Camera Systems, Video Recorders and Capture Systems, Projector Video Input Front Ends, Industrial Vision Equipment, Broadcast and Studio Signal Conversion, Consumer Television and Set-Top Equipment.
Analog Surveillance Camera Systems
The ADV7183BKSTZ fits analog surveillance camera designs that must accept composite video from different regional television standards. Its automatic NTSC, PAL, and SECAM detection avoids manual selection during installation, while three 10-bit ADCs provide synchronized conversion paths. Place the decoder between the camera input network and an FPGA, ASIC, encoder, or storage controller. Confirm source impedance, termination, anti-alias filtering, and grounding in the analog front end.
پێشنیارکراو
Video Recorders and Capture Systems
The ADV7183BKSTZ is suitable for video-recorder front ends that receive composite television signals and produce component-video pixels for downstream encoding or storage. Automatic standard detection supports mixed regional installations, and the B revision improves behavior with noisy or weak sources. Use the decoder output to feed a scaler, media processor, or FPGA. Validate line locking, blanking intervals, embedded synchronization, and latency against the selected system clock.
پێشنیارکراو
Projector Video Input Front Ends
The ADV7183BKSTZ supports projector input stages designed to accept analog baseband television signals across NTSC, PAL, and SECAM standards. Its 4:2:2 component-video output can feed an image scaler or digital display controller, while automatic detection simplifies user setup. Pay particular attention to analog connector isolation, source filtering, synchronized clocks, and controlled-impedance routing between the decoder and downstream video logic.
پێشنیارکراو
Industrial Vision Equipment
The ADV7183BKSTZ can serve as the multiformat analog-video decoder in industrial vision equipment that receives standard composite television signals from cameras or test apparatus. The integrated 10-bit ADCs and 27 MHz crystal-based clocking reduce the need for separate converters. Connect the decoded 4:2:2 output to FPGA or ASIC image processing and verify electromagnetic compatibility, grounding, and connector-to-decoder signal integrity for the installation environment.
پێشنیارکراو
Broadcast and Studio Signal Conversion
The ADV7183BKSTZ is appropriate for broadcast equipment requiring automatic recognition of NTSC, PAL, or SECAM baseband sources and conversion into digital component-video data. Its three integrated 10-bit ADCs provide a compact multichannel sampling architecture around one 27 MHz crystal. Use it ahead of digital routing, monitoring, processing, or recording equipment, while preserving source impedance, grounding, and compliant video timing.
پێشنیارکراو
Consumer Television and Set-Top Equipment
The ADV7183BKSTZ supports legacy analog television inputs in set-top boxes, television sets, and multimedia displays where regional NTSC, PAL, or SECAM compatibility is important. Automatic detection reduces configuration complexity, and 4:2:2 output can feed scaling or display-processing circuitry. Ensure the product is supported for the target consumer-market temperature range and validate the complete analog, digital, and power-supply design before production release.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADV7183BKSTZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Product Type | 10-bit integrated multiformat video decoder |
| Supported Video Standards | NTSC, PAL, and SECAM |
| ADC Resolution | 10 bit |
| Integrated ADC Count | 3 |
| ADC Sampling Rate | 54 MHz |
| System Clock | 27 MHz crystal |
| Output Format | 4:2:2 component video |
| Digital Interface | CCIR601 and CCIR656 compatible |
| Package | 80-lead LQFP, 14 mm x 14 mm |
| Brand | Analog Devices |
جیاکەرەوە سەرەکییەکان
- Automatic multiformat television decoding (بەراورد بەSingle-standard decoder)
- Integrated parallel conversion front end (بەراورد بەDiscrete ADC-based decoder)
- Improved weak-signal and VCR-locking behavior in the B revision (بەراورد بەEarlier ADV7183 generation)
تێبینییەکانی دیزاین
Route the 27 MHz crystal and its load network close to the decoder with a short ground return, following the manufacturer reference layout. Keep the analog input traces away from digital clock and pixel-output nets, maintain continuous ground planes beneath the analog section, and place input filtering components close to the source interface.
Treat the composite-video path as a high-impedance analog signal until the ADC input. Match source impedance, implement the specified termination network, and validate filter response for the required NTSC, PAL, and SECAM channels. Use controlled-impedance routing for digital output interfaces and keep clock distribution isolated from sensitive analog traces.
Do not select a replacement based only on nominal video-standard support. Confirm that every supply pin, ground connection, analog input, clock pin, control pin, and digital-output pin matches the exact 80-lead LQFP ordering code. Also verify register compatibility, synchronization timing, output modes, and clock requirements before treating a candidate as pin-compatible.
Place all required decoupling capacitors adjacent to their associated supply pins and provide an unobstructed return path for high-speed outputs. Separate analog and digital supply distribution where the device architecture permits, use a solid ground plane, and avoid placing test points or long stubs on sensitive video-input nets.
زانیاری پابەندبوون
No specific compliance declarations were stated in the verified product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering code before production release.