ADV7280WBCPZ - 10-Bit Video Decoder | Analog Devices
MPN: ADV7280WBCPZ ✓ چالاکADV7280WBCPZ گشتی
A video decoder is an interface IC that translates analog baseband video into digital pixel data. In the broader signal-chain hierarchy, the ADV7280WBCPZ belongs to video interface ICs, codecs, and semiconductor signal-processing devices. Such decoders are commonly positioned after camera, broadcast, surveillance, or video-conversion equipment and before a digital processor, frame buffer, display controller, or encoder. Their primary function is to normalize multiple analog television formats into a digital interface suitable for further processing.
The ADV7280 family provides automatic multiformat detection for worldwide NTSC, PAL, and SECAM signals. Four-times oversampling supports conversion of composite, S-Video, and component video, while the integrated deinterlacer addresses interlaced source material. The 10-bit conversion identifies the internal video-processing resolution, and the resulting 8-bit ITU-R BT.656 stream uses a conventional parallel pixel interface with a line-locked clock and synchronization outputs.
Digital integration through I2C allows an embedded controller to configure and monitor the decoder rather than relying on a fixed hardware setup. The ADV7280WBCPZ also has an automotive-oriented ordering designation identified by the product listing as AEC-Q100. In a system-level design, this combination of multiformat detection, deinterlacing, digital output, and serial control reduces the need for separate decoder blocks and allows one device to support several analog video standards.
Typical uses include automotive display systems, surveillance-video conversion, broadcast and professional video equipment, industrial camera interfaces, and embedded video capture. In these applications, the decoder can normalize an incoming composite or component signal, generate a stable digital pixel stream, and pass synchronization information to the downstream processor. The manufacturer datasheet identifies the output format as ITU-R BT.656, including a line-locked clock and synchronization signals.
PCB implementation should preserve short, controlled analog video paths and provide a stable digital return path between the decoder and the following processor. Analog and digital supply rails should be decoupled according to the manufacturer application guidance, while the exposed-pad thermal design should be evaluated for the final board stack-up and enclosure. Because the device combines analog input conversion with digital timing, trace routing and return-path continuity directly affect picture quality.
This page consolidates the ADV7280WBCPZ format support, interface architecture, package information, replacement analysis, and practical integration guidance. It is designed to help engineers compare the decoder with related Analog Devices video-interface options and build an interoperable analog-video acquisition path without overlooking software compatibility, package details, or thermal-layout requirements.
جێگرەوەکانی جێگۆڕکێ بۆ ADV7280WBCPZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADV7280WBCPZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Control Interface, Oversampling, ADC Resolution.
ADV7280A
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADV7280BCPZ-M
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADV7282WBCPZ
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADV7180WBCPZ
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADV7182WBCPZ
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADV7280WBCPZ تایبەتمەندییەکان
| Product Type | Multiformat SDTV video decoder with deinterlacer |
| ADC Resolution | 10 bit |
| Oversampling | 4 times |
| Supported Analog Video Formats | NTSC, PAL, SECAM, composite, S-Video, and component video |
| Automatic Format Detection | Automatic NTSC, PAL, and SECAM detection |
| Digital Color Representation | YCrCb 4:2:2 |
| Digital Output Format | 8-bit ITU-R BT.656 |
| Control Interface | I2C |
| Analog Input | Composite, S-Video, and component video |
| Output Clock | Line-locked clock (LLC) |
| Synchronization Outputs | HS and VS/FIELD/SFL |
| پاکێج | 32-LFCSP (5 x 5 mm) |
| ژمارەی پین | 32 pins |
| جۆری دامەزراندن | Surface mount |
| Automotive Qualification | AEC-Q100 |
ڕێنمایی ڕێکخستنی پینی ADV7280WBCPZ 32-lfcsp (5 x 5 mm)
ڕێکخستنی پین بۆ ADV7280WBCPZ (پاکێجی 32-lfcsp (5 x 5 mm)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADV7280WBCPZ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADV7280WBCPZ گونجاوە بۆ 6 بەکارھێنانs: Automotive Video Conversion, Industrial Camera Interface, Surveillance Video Capture, Broadcast and Professional Video, Legacy Video Interface Conversion, Video Test and Measurement.
Automotive Video Conversion
The ADV7280WBCPZ fits automotive video-conversion blocks that receive composite, S-Video, or component analog video and need a normalized digital output. Its 10-bit, four-times-oversampled conversion and automatic NTSC, PAL, and SECAM detection can simplify multi-standard source handling, while the deinterlacer supports interlaced camera or legacy display signals. The resulting 8-bit ITU-R BT.656 stream, including LLC and synchronization outputs, can feed a downstream display controller or image processor. Its AEC-Q100 listing supports automotive consideration, although qualification, traceability, and production-part requirements still require confirmation.
پێشنیارکراو
Industrial Camera Interface
The ADV7280WBCPZ is suitable for industrial camera interfaces that deliver standard analog baseband video rather than a digital camera stream. Automatic format detection allows one receiver path to address NTSC, PAL, and SECAM sources, while composite, S-Video, and component inputs cover several common connector and cable arrangements. The 4:2:2 YCrCb representation and 8-bit ITU-R BT.656 output provide a defined digital format for an FPGA, embedded processor, or capture controller. Deinterlacing reduces the processing burden for interlaced sources, but analog routing and synchronization integrity remain important design priorities.
پێشنیارکراو
Surveillance Video Capture
The ADV7280WBCPZ can serve as the analog front end of a surveillance-video capture system using composite or S-Video camera output. Its automatic standard detection supports installations spanning NTSC, PAL, and SECAM without manually reconfiguring the decoder for each source. Four-times oversampling and the integrated deinterlacer support consistent conversion of interlaced surveillance video, while I2C control allows the recorder or system controller to manage setup through a serial interface. The 8-bit ITU-R BT.656 output can connect to an FPGA or embedded video engine, provided the analog input path is properly terminated and routed.
پێشنیارکراو
Broadcast and Professional Video
The ADV7280WBCPZ is appropriate for broadcast, professional-video, and legacy display equipment that must ingest several analog video standards. Its automatic NTSC, PAL, and SECAM detection simplifies source adaptation, while support for composite, S-Video, and component video covers common analog-generation equipment. The decoder produces a digital YCrCb 4:2:2 representation and an 8-bit ITU-R BT.656 stream with line-locked clock and synchronization outputs for downstream processing. The integrated deinterlacer supports interlaced source conversion, while I2C control simplifies integration into a system-level controller.
پێشنیارکراو
Legacy Video Interface Conversion
The ADV7280WBCPZ provides a practical bridge between legacy analog video equipment and a modern digital processing platform. Its 10-bit oversampling architecture accepts composite, S-Video, or component sources, automatically identifies NTSC, PAL, or SECAM, and converts the selected input into standardized digital pixels. The 8-bit ITU-R BT.656 interface is broadly compatible with programmable logic and embedded video engines, while LLC and synchronization outputs establish the required timing relationship. I2C control reduces the number of discrete configuration signals, making the decoder useful in test equipment, media converters, and industrial display controllers.
پێشنیارکراو
Video Test and Measurement
The ADV7280WBCPZ can be used in test and measurement equipment that requires a repeatable bridge from analog video sources to digital analysis hardware. Automatic detection of NTSC, PAL, and SECAM allows a test system to characterize multiple standards without manually selecting each encoding. Composite, S-Video, and component inputs broaden source compatibility, while the integrated deinterlacer and YCrCb 4:2:2 conversion provide standardized data for analysis. The 8-bit ITU-R BT.656 output, LLC, and synchronization signals can feed FPGA-based measurement logic, with I2C used for setup and register access.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADV7280WBCPZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADV7280A | ADV7280BCPZ-M | ADV7282WBCPZ | ADV7180WBCPZ | ADV7182WBCPZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 32-LFCSP (5 x 5 mm) | 32-LFCSP (5 x 5 mm) - same | 32-LFCSP (5 x 5 mm) - same | 32-LFCSP (5 x 5 mm) - same | 32-LFCSP (5 x 5 mm) - same | 32-LFCSP (5 x 5 mm) - same |
جیاکەرەوە سەرەکییەکان
- Manufacturer-confirmed pinout and software compatibility (بەراورد بەADV7280A)
- Automatic multiformat detection (بەراورد بەADV7180WBCPZ)
- Integrated 10-bit oversampling and deinterlacing (بەراورد بەADV7282WBCPZ)
تێبینییەکانی دیزاین
Route the composite, S-Video, and component inputs as controlled analog signals with short paths and continuous return references. Keep the digital BT.656 bus, LLC, and synchronization lines away from sensitive video inputs, particularly around connector entry points and switching regulators. Use the ground and exposed-pad guidance in the manufacturer layout guidance, and maintain symmetrical digital routing so data, clock, and synchronization acquire timing with minimum skew.
Do not treat a shared LFCSP footprint as sufficient proof of interchangeability. Before replacing ADV7280WBCPZ, verify input-channel count, supported analog formats, register addresses, clock requirements, interrupt behavior, and firmware configuration. The ADV7280A is specifically described as pinout- and software-compatible, while ADV7282 and ADV7180 options may require schematic, software, and system-timing changes despite retaining the same package family.
Implement the exposed thermal pad according to the manufacturer package-land pattern and board-assembly requirements. Provide uninterrupted copper beneath the device, thermal vias where the footprint permits them, and an adequate return path to the system ground plane. Actual junction temperature depends on analog-input dissipation, digital-output activity, ambient temperature, copper area, via count, and the assembled board stack-up, so thermal performance must be validated in the final enclosure.
Treat LLC as the timing reference for the BT.656 output and preserve its relationship to the parallel pixel data and synchronization signals. Avoid unnecessary stubs, test-point structures, and impedance discontinuities on the digital bus. Match the downstream receiver’s expected logic levels, and confirm setup and hold-time margins in the complete system timing budget rather than relying only on nominal component characteristics.
زانیاری پابەندبوون
The product listing identifies the ADV7280WBCPZ as automotive AEC-Q100. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not established by the available product information.