Analog Devices

ADV7392WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

MPN: ADV7392WBCPZ ✗ کۆتایی ژیان
2.7 V or 3.3 V Vdss Composite CVBS and S-Video Rds(on) 40-LFCSP-WQ, 6 mm × 6 mm Package
MOQ: 1 |

ADV7392WBCPZ گشتی

The Analog Devices ADV7392WBCPZ is a low-power, chip-scale, 10-bit SD/HD video encoder packaged in a 40-LFCSP-WQ 6 mm × 6 mm surface-mount package. The device belongs to the ADV7390, ADV7391, ADV7392, and ADV7393 family of high-speed digital-to-analog video encoders and uses three 2.7 V or 3.3 V, 10-bit video DACs to generate analog composite and S-Video outputs.

A video encoder is a data-converter IC that accepts digital video pixel data and converts it into analog video signals suitable for composite or S-Video equipment. Within the signal-chain hierarchy, the ADV7392 is a video encoder, an interface IC, and a data-converter IC. Its DAC-based output stage bridges digital video-processing circuitry and legacy analog displays, televisions, DVD equipment, game consoles, and media players.

Principal characteristics include 10-bit video DAC resolution, support for SD and HD video formats, three analog video outputs, low-power operation, and a compact chip-scale package. The three-DAC arrangement allows one encoder to drive multiple analog outputs, reducing component count in systems that require composite and S-Video generation. The 40-LFCSP-WQ package also places the converter close to its digital input source and analog output connectors, which can help shorten sensitive routing paths.

The ADV7390/ADV7391/ADV7392/ADV7393 family shares a common encoder architecture and digital timing approach. The manufacturer data sheet states that the digital timing specification section defines the falling-edge HSYNC behavior and the resulting tri-level synchronization timing at the analog output. Matching digital input timing, synchronization, and DAC settling requirements is essential when the encoder is used with an external FPGA, scaler, or video processor.

Typical applications include DVD players, game consoles, media players, broadcast and professional video equipment, video capture hardware, and industrial display systems that require conversion from digital video to composite or S-Video. An FPGA-based source can feed parallel pixel data and synchronization signals while the ADV7392 handles the final digital-to-analog conversion stage.

When laying out the board, place the encoder close to the analog output connectors, route synchronization and pixel-data traces as controlled-length digital interfaces, and decouple each analog supply rail locally. Confirm input format, pixel clock, synchronization polarity, output standard, and allowed timing margin against the manufacturer data sheet before the layout is released.

This page consolidates the verified product identity, package information, family-level capabilities, lifecycle status, related encoder options, and application guidance into a design-focused reference for engineers evaluating the ADV7392WBCPZ.

جێگرەوەکانی جێگۆڕکێ بۆ ADV7392WBCPZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADV7392WBCPZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Lifecycle Status, Number of DACs, Output Formats, Product Type.

Analog Devices
Package: 32-lead LFCSP, 5 mm x 5 mm
بەراوردکردن لەگەڵ ADV7392WBCPZ →
Analog Devices
Package: 32-LFCSP (5x5 mm) with exposed pad
Lifecycle Status: Not Recommended for New Designs (NRND)
Number of DACs: 3
بەراوردکردن لەگەڵ ADV7392WBCPZ →
Analog Devices
Package: 40-pin LFCSP-WQ (6x6 mm)
Number of DACs: 3 (10-bit each)
Output Formats: Composite (CVBS), S-Video (Y-C), Component (YPrPb)
بەراوردکردن لەگەڵ ADV7392WBCPZ →

ADV7390WBCPZ

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 40-LFCSP-WQ (6x6)
10-bit SD/HD video encoder · Composite CVBS and S-Video Y-C · 3 channels · 11 bit · 2.7 V or 3.3 V nominal · 2.6 V to 3.46 V · 16x or 4x · 32-lead LFCSP, 5 mm x 5 mm

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADV7391WBCPZ

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 40-LFCSP-WQ (6x6)
10-Bit SD/HD Video Encoder with 3 DACs · 3 · 10-bit · NTSC, PAL, SECAM (SD); 720p, 1080i, 1080p (HD) · Composite (CVBS), S-Video (Y-C), Component (YPbPr/RGB) · 8/16/24-bit (ITU-R BT.656 / SMPTE 274M/296M-compatible) · 3.0 V to 3.6 V · 1.8 V typical

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADV7393WBCPZ

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 40-LFCSP-WQ (6x6)
Video Encoder IC (10-bit SD/HD) · 3 (10-bit each) · 10-bit · SD (NTSC/PAL), HD (720p/1080i) · Composite (CVBS), S-Video (Y-C), Component (YPrPb) · 1.8 V or 3.3 V · 2.7 V / 3.3 V · 80 MHz

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADV7392WBCPZ تایبەتمەندییەکان

Product Type 10-bit SD/HD video encoder IC
Video DAC Resolution 10 bit
Number of Video DACs 3 DACs
Video DAC Supply Options 2.7 V or 3.3 V
Supported Video Classes SD and HD video
Analog Output Standards Composite CVBS and S-Video
Architecture High-speed digital-to-analog video encoder
Power Class Low-power chip-scale device
پاکێج 40-LFCSP-WQ, 6 mm × 6 mm
جۆری دامەزراندن Surface mount
Manufacturer Family ADV7390/ADV7391/ADV7392/ADV7393
Analog Output Type Tri-level sync supported on composite outputs
دۆخی چرخەی ژیان Not recommended for new designs
Data Sheet Revision Rev. K
Analog Output Resolution 10 bit

ڕێنمایی ڕێکخستنی پینی ADV7392WBCPZ 40-lfcsp-wq, 6 mm × 6 mm

ڕێکخستنی پین بۆ ADV7392WBCPZ (پاکێجی 40-lfcsp-wq, 6 mm × 6 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 40-lfcsp-wq, 6 mm × 6 mm بۆ ADV7392WBCPZ

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADV7392WBCPZ.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADV7392WBCPZ گونجاوە بۆ 6 بەکارھێنانs: DVD Player Video Output, Game Console Composite Video, Media Player Analog Output, FPGA Video Capture Card, Professional Video Equipment, Industrial Video Control Panel.

📺

DVD Player Video Output

The ADV7392WBCPZ fits the final analog-output stage of a DVD player that must generate composite or S-Video from digital decoded video. Its three 10-bit DACs provide the required analog conversion at 2.7 V or 3.3 V, while the SD/HD capability allows the same encoder family to cover multiple source formats. A decoder or FPGA can provide compatible pixel data and synchronization. Place the encoder close to the output connectors, keep pixel-clock routing away from the analog outputs, and verify timing against the family data sheet before routing the board.

🎮

Game Console Composite Video

A game console that retains legacy composite or S-Video connections can place the ADV7392WBCPZ after its digital video pipeline. The three 10-bit video DACs support multiple analog outputs from one encoder, and the low-power chip-scale construction fits space-constrained consumer hardware. The FPGA, scaler, or video controller must generate a compatible pixel clock and synchronization signals. Validate output timing, sync polarity, and the falling-edge HSYNC relationship in the family data sheet before enabling the analog outputs.

📱

Media Player Analog Output

The ADV7392WBCPZ is suitable for a media player that converts decoded digital video into analog composite or S-Video for televisions and legacy displays. Three 10-bit DACs allow several outputs to be generated from a common video source, reducing the need for separate converter devices. Design the analog path for short routing from the encoder to the connectors, use local bypassing on each supply rail, and isolate digital pixel-data traces from the sensitive video outputs to preserve image quality.

🖥️

FPGA Video Capture Card

In an FPGA-based capture card, the ADV7392WBCPZ can serve as the analog encoding stage after the FPGA has processed pixels and generated timing. The encoder's SD/HD capability and 10-bit DAC resolution make it appropriate for systems that need to present decoded digital video as an analog signal. The interface design must honor the digital timing specification, including the defined HSYNC-to-tri-level-sync relationship and pipeline delay. Use short, controlled digital routes and place analog output filtering close to the encoder.

🎥

Professional Video Equipment

The ADV7392WBCPZ can provide composite or S-Video conversion in professional monitoring, recording, and broadcast-adjacent equipment that accepts digital video and requires legacy analog outputs. Its 10-bit DACs and multi-output capability support a compact converter section, while the 6 mm × 6 mm package helps preserve board area. Use the manufacturer's reference application guidance, connect the exposed pad as directed, and verify grounding and return paths so converter energy does not couple into sensitive video circuitry.

🏭

Industrial Video Control Panel

An industrial control or monitoring panel with a legacy analog display can use the ADV7392WBCPZ to produce composite or S-Video from a digital graphics or video controller. The three-DAC configuration provides flexibility when more than one analog output is needed, and the compact package suits densely populated control electronics. Validate synchronization timing and supported resolution at the system level, keep the analog section physically separated from switching supplies, and provide stable, locally decoupled rails for predictable video output.

What is the ADV7392WBCPZ used for?
The ADV7392WBCPZ is a low-power, chip-scale digital-to-analog video encoder that converts digital video data into analog composite and S-Video signals. Analog Devices describes the device as part of the ADV7390/ADV7391/ADV7392/ADV7393 family, which uses 2.7 V or 3.3 V, 10-bit video DACs. It is suited to DVD equipment, game consoles, media players, video-capture hardware, and other systems requiring SD or HD digital-to-analog video conversion.
How many video DACs does the ADV7392WBCPZ contain?
The ADV7392WBCPZ contains three 10-bit video DACs. According to the Analog Devices ADV7392 product page and the ADV7390/7391/7392/7393 data sheet, the three-DAC configuration supports multiple analog outputs, including composite CVBS and S-Video functions. The single-DAC arrangement mentioned for the WLCSP option belongs to a different member of the family rather than the 40-LFCSP-WQ ADV7392WBCPZ.
What package does the ADV7392WBCPZ use?
The ADV7392WBCPZ is supplied in a 40-LFCSP-WQ package measuring 6 mm × 6 mm. The DigiKey product listing identifies the same 40-LFCSP-WQ package designation. Because this leadless chip-scale package is not represented by a dedicated XAIPART package diagram, the page uses the default package illustration; consult the manufacturer pin-description table and land pattern before assigning PCB tracks.
Where can I download the ADV7392WBCPZ datasheet PDF?
The official ADV7392WBCPZ data sheet is available from Analog Devices at the ADV7390_7391_7392_7393 PDF address shown on this page. The manufacturer identifies it as data sheet Rev. K and includes the digital timing specifications, analog output information, pin descriptions, and application guidance for the encoder family. Use the package-specific pin table when assigning the 40-LFCSP-WQ footprint.
Where can I find the ADV7392WBCPZ pinout?
The ADV7392WBCPZ pinout is published in the pin-description table of the Analog Devices ADV7390/ADV7391/ADV7392/ADV7393 data sheet Rev. K. Use that table together with the recommended land pattern for the 40-LFCSP-WQ package. Assign signal routing only after matching the selected device variant, exposed-pad connection, supply pins, digital input bus, clock inputs, and analog output pins to the exact table.
Is the ADV7392WBCPZ still active for new designs?
No. Analog Devices marks the ADV7392 as NOT RECOMMENDED FOR NEW DESIGNS, so its lifecycle status is NRND rather than active. Existing designs can continue to use the part, but new production programs should confirm the complete obsolescence roadmap, last-time-buy timing, and availability with the manufacturer before committing a long-term BOM.
ADV7392WBCPZ vs ADV7393WBCPZ - which encoder should I choose?
Choose the ADV7392WBCPZ when the design needs the three-DAC configuration, while the ADV7393WBCPZ represents the lower-output-count member of the encoder family. Both share the ADV7390-family digital-to-analog conversion architecture, but their DAC counts and output requirements differ by one or more channels depending on the board architecture. Confirm output count, package dimensions, and thermal requirements against the manufacturer data sheet.
ADV7392WBCPZ vs ADV7390WBCPZ - are they pin-compatible?
The ADV7392WBCPZ and ADV7390WBCPZ belong to the same high-speed digital-to-analog encoder family and use the 40-LFCSP-WQ package option. Their internal feature sets and supported output configurations are not identical, so board interchangeability must be verified at the digital input, supply, clock, control, and analog-output level. Use the family data sheet and each device's register map before treating one as a drop-in replacement.
What can replace the ADV7392WBCPZ?
The closest same-family candidates are the ADV7390WBCPZ, ADV7391WBCPZ, and ADV7393WBCPZ, all listed within the Analog Devices encoder family. A valid replacement must match the 40-LFCSP-WQ footprint, required DAC count, digital pixel-data interface, clocking scheme, synchronization timing, supply rails, and analog output plan. Treat the replacement as a redesign until those functions are verified against the device-specific data sheets.
Is the ADV7392WBCPZ suitable for an FPGA-based video source?
Yes. The ADV7392WBCPZ is designed as the analog output stage of a digital video chain, and an FPGA is a suitable source when it generates compatible pixel data, pixel clock, and synchronization signals. The interface must meet the timing requirements defined in the family digital timing specification, including the falling-edge HSYNC behavior that produces the corresponding composite sync edge after the encoder pipeline delay.
How should the ADV7392WBCPZ analog outputs be laid out?
Place the 40-LFCSP-WQ encoder close to the composite or S-Video output connectors to minimize analog trace length. Keep the digital pixel-data and clock routing away from the DAC outputs, provide local supply bypassing at the device pins, and follow the manufacturer layout guidance for exposed-pad and ground connections. Verify the final return path and connector grounding to reduce radiated and conducted noise.
What are the key specifications engineers should know about the ADV7392WBCPZ?
The essential ADV7392WBCPZ specifications are its 10-bit video DAC resolution, three 2.7 V or 3.3 V video DACs, support for SD and HD video, composite and S-Video output capability, and a 40-LFCSP-WQ 6 mm × 6 mm package. The device also belongs to a low-power encoder family with tri-level sync behavior described in the digital timing section of the Rev. K data sheet.
Where can I buy the ADV7392WBCPZ online?
Use the Request a Quote form on this page to request ADV7392WBCPZ availability, current lead time, and order quantities from XAIPART. Because Analog Devices marks the ADV7392 as not recommended for new designs, include the intended quantity, target date, and whether the requirement is maintenance or a new design when submitting the request. This allows allocation and lifecycle confirmation to be handled in one transaction.
What is the price of the ADV7392WBCPZ?
The current ADV7392WBCPZ price depends on quantity, lifecycle allocation, and shipment timing. Use the Request a Quote form on this page to obtain the applicable unit and volume pricing for your order. Because the device is NRND, provide your target quantity and required delivery date so remaining inventory and future allocation can be confirmed together.
How long is the lead time for the ADV7392WBCPZ?
Lead time for the ADV7392WBCPZ depends on remaining inventory and the supplier's allocation for a part marked not recommended for new designs. Request the current lead time through the Request a Quote form on this page, and include your required delivery date and annual usage. For maintenance programs, state whether a scheduled multi-year buy is needed.
Is the ADV7392WBCPZ in stock?
Stock for the ADV7392WBCPZ can change quickly because Analog Devices classifies the device as not recommended for new designs. Use the Request a Quote form on this page to request a current availability confirmation rather than relying on a static listing. Provide the required quantity, reel or tray preference, target date, and any date-code constraints for the quote request.

داتای سەرچاوەی ئەندازیاری بۆ ADV7392WBCPZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Select the ADV7392WBCPZ when a design requires three 10-bit video DACs for composite or S-Video generation and accepts the part's not-recommended-for-new-designs lifecycle position. The ADV7390WBCPZ is the closer functional choice for designs that can use its available outputs while remaining in the same encoder family and package option. The ADV7391WBCPZ should be considered when its channel configuration matches the intended video outputs more closely. The ADV7393WBCPZ is appropriate where a single DAC is sufficient. In every case, verify the exact digital input width, clock rate, synchronization timing, control interface, supply arrangement, exposed-pad connection, and output network against the device-specific data sheet before treating a family member as a replacement.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADV7390WBCPZ ADV7391WBCPZ ADV7393WBCPZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 40-LFCSP-WQ (6x6) 40-LFCSP-WQ (6x6) 40-LFCSP-WQ (6x6) 40-LFCSP-WQ (6x6)
Video DAC Resolution 10 bit 10 bit 10 bit 10 bit
Video DAC Supply 2.7 V or 3.3 V 2.7 V or 3.3 V 2.7 V or 3.3 V 2.7 V or 3.3 V
Supported Video Classes SD and HD video SD and HD video SD and HD video SD and HD video
Analog Output Standards Composite CVBS and S-Video Composite CVBS and S-Video Composite CVBS and S-Video Composite CVBS and S-Video
Power Class Low-power chip-scale device Low-power chip-scale device Low-power chip-scale device Low-power chip-scale device
Manufacturer Family ADV7390/ADV7391/ADV7392/ADV7393 ADV7390/ADV7391/ADV7392/ADV7393 ADV7390/ADV7391/ADV7392/ADV7393 ADV7390/ADV7391/ADV7392/ADV7393

جیاکەرەوە سەرەکییەکان

  • Three-DAC analog output configuration (بەراورد بەADV7393WBCPZ)
  • 10-bit conversion across the same encoder family (بەراورد بەADV7390WBCPZ)
  • Compact multi-output encoder integration (بەراورد بەADV7391WBCPZ)

تێبینییەکانی دیزاین

Place the 40-LFCSP-WQ encoder close to the composite or S-Video connector and route each analog output directly toward its output network. Keep the high-speed pixel-data bus, pixel clock, and synchronization traces on the opposite side of the device where practical. Analog traces should not run beneath or parallel to the digital input bus, because coupling between the high-speed digital and video output paths can appear as noise, edge distortion, or visible artifacts.

Use the manufacturer's recommended analog and digital supply arrangements for the 2.7 V or 3.3 V DAC rails. Place decoupling capacitors at the corresponding device pins and connect them to a low-impedance ground reference rather than sharing long return paths with digital output currents. Verify dropout margin, power-up sequencing, and operating current under the selected video mode before finalizing the supply network.

The ADV7390-family data sheet places the digital timing requirements in a dedicated digital timing specification section. Validate pixel-clock frequency, data setup and hold margins, and synchronization polarity for the exact encoder and FPGA or scaler pairing. In particular, confirm the falling-edge HSYNC input and the corresponding tri-level synchronization output timing, including the encoder pipeline delay, before sign-off.

Do not assume that every member of the ADV7390/ADV7391/ADV7392/ADV7393 family is register-compatible or functionally interchangeable. Confirm DAC count, supported output configuration, digital input width, clocking, control pins, and exposed-pad requirements for each exact ordering code. Because the ADV7392 is marked not recommended for new designs, also avoid introducing it into a new design unless the manufacturer confirms lifecycle coverage and the business case justifies it.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer identifies the ADV7392 as not recommended for new designs. RoHS, REACH, halogen-free, and conflict-minerals status were not established from the product information and must be confirmed for the exact ordering code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADV7392WBCPZ datasheet ADV7392WBCPZ datasheet pdf ADV7392WBCPZ pinout ADV7392WBCPZ 40-LFCSP-WQ ADV7392WBCPZ video encoder ADV7392WBCPZ equivalent ADV7392WBCPZ replacement ADV7392WBCPZ vs ADV7390WBCPZ ADV7392WBCPZ vs ADV7393WBCPZ Analog Devices ADV7392WBCPZ ADV7392WBCPZ composite video encoder ADV7392WBCPZ S-Video output ADV7392WBCPZ price ADV7392WBCPZ stock ADV7392 10-bit video encoder

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices ADV7392WBCPZ ADV7390WBCPZ ADV7391WBCPZ ADV7393WBCPZ ADV7390 ADV7391 ADV7392 ADV7393 video encoder digital-to-analog video encoder video DAC data converter IC interface IC composite CVBS S-Video SD video HD video 10-bit resolution 40-LFCSP-WQ 6 mm × 6 mm package chip-scale package surface mount FPGA pixel clock HSYNC tri-level sync low-power device not recommended for new designs
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ