AK4112BVF 4-Channel AES/EBU Audio Receiver | AKM
MPN: AK4112BVF ✓ چالاکAK4112BVF گشتی
An AES/EBU receiver is an interface IC that accepts serial digital audio data, extracts clock and framing information, and converts the encoded transmission into a form that can be processed by a decoder, DAC, or audio signal-chain device. In the product hierarchy, the AK4112BVF belongs to the audio special-purpose IC class, which sits below audio interface ICs and above general-purpose digital audio converters.
The AK4112BVF provides a 4-channel digital audio receiver in a single device, reducing the component count in systems that previously required separate receivers for multiple channels. Its 2.7 V to 3.6 V operating range supports low-voltage digital audio systems, while the 22 kHz to 108 kHz sampling-rate range covers standard CD, DVD, and high-resolution multichannel audio streams. The 28-VSOP package provides a compact surface-mount footprint for equipment with limited board area.
The receiver is suited to digital audio systems operating at 48 kHz, 96 kHz, and 108 kHz sampling rates, where multiple channels must be recovered from a single digital audio link. Its interface role also makes it applicable to digital audio monitoring, home-theater front ends, broadcast equipment, and professional sound systems. System clocking and signal-integrity implementation remain the responsibility of the host circuit.
Careful layout is essential because the AES/EBU interface carries high-frequency clock and data signals. Route the serial data and clock lines away from analog outputs, switching-regulator inductors, and other noisy circuits. Follow the manufacturer datasheet for input termination, decoupling, grounding, and exposed-pad or thermal-pad recommendations applicable to the 28-pin package.
This page combines the AK4112BVF interface specifications, verified distributor listings, drop-in family options, application guidance, and practical layout considerations. It is intended to help engineers identify the correct package variant, plan the receiving stage, and evaluate replacement options without relying on a generic distributor description.
جێگرەوەکانی جێگۆڕکێ بۆ AK4112BVF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
AK4112BVF-E2
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AK4112VF
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AK4112BVF تایبەتمەندییەکان
| Product Type | 4-channel AES/EBU audio receiver |
| Manufacturer | Asahi Kasei Microdevices/AKM |
| Supply Voltage Range | 2.7 V to 3.6 V |
| Supported Sampling Frequency Range | 22 kHz to 108 kHz |
| Number of Channels | 4 channels |
| پاکێج | 28-VSOP |
| Package Family | 28-LSSOP, 0.220 inch lead pitch |
| جۆری دامەزراندن | Surface mount |
| Digital Audio Interface | AES/EBU |
| Device Category | Audio special purpose IC |
| Maximum Sampling Frequency | 108 kHz |
| Minimum Sampling Frequency | 22 kHz |
ڕێنمایی ڕێکخستنی پینی AK4112BVF 28-lssop, 0.220 inch lead pitch
ڕێکخستنی پین بۆ AK4112BVF (پاکێجی 28-lssop, 0.220 inch lead pitch). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AK4112BVF.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AK4112BVF گونجاوە بۆ 6 بەکارھێنانs: Multichannel DVD and Home-Theater Receiver, Professional Digital Audio Monitoring, Broadcast and Studio Digital Audio Interface, CD and Digital Audio Player Front End, Digital Audio Interface for Industrial Equipment, Multi-Rail Digital Audio Processing Board.
Multichannel DVD and Home-Theater Receiver
The AK4112BVF fits a home-theater input stage that must receive multichannel AES/EBU audio from a DVD player, set-top box, or game console. Its 4-channel receiver capability and 22 kHz to 108 kHz sampling range cover standard 48 kHz and high-resolution 96 kHz streams, while the 2.7 V to 3.6 V supply range allows direct interfacing with modern low-voltage digital logic. Place the device near the source connector and route the data and clock lines away from switching power stages. The host decoder or DAC still performs signal conversion to analog audio, so the AK4112BVF should be viewed as the digital input interface rather than the final audio output stage.
پێشنیارکراو
Professional Digital Audio Monitoring
The AK4112BVF is appropriate for professional monitoring equipment that accepts a digital AES/EBU feed and must recover several channels before conversion or level processing. Its support for sampling frequencies up to 108 kHz accommodates high-resolution studio streams, and its 4-channel architecture reduces the number of discrete receiver circuits needed in a multi-output design. The interface remains sensitive to clock jitter, ground discontinuities, and data-line impedance, so the PCB should use a continuous ground reference and short clock routes. A downstream converter such as the CS4461-CZZ can then generate line-level outputs, while the AK4112BVF handles the digital input reception stage.
پێشنیارکراو
Broadcast and Studio Digital Audio Interface
A broadcast or studio interface can use the AK4112BVF to accept digital audio from an AES/EBU source at standard professional sampling rates. The documented 22 kHz to 108 kHz range provides margin for 48 kHz, 96 kHz, and 108 kHz studio formats, while the four-channel receiver simplifies designs that distribute multiple channels to separate processing paths. Place the receiver close to the input connector, use a low-impedance digital return path, and isolate clock and data traces from relay and switching-control circuitry. The downstream clocking architecture must provide a stable source reference, and the manufacturer datasheet should govern termination and decoupling values for the finished design.
پێشنیارکراو
CD and Digital Audio Player Front End
The AK4112BVF can form the digital reception stage of a CD player, network player, or other source that receives an AES/EBU stream. Although the device supports rates up to 108 kHz, the 22 kHz lower boundary also covers base-rate digital audio use cases. Its 2.7 V to 3.6 V operating range is suitable for low-voltage mixed-signal boards, and the dedicated 4-channel receiver avoids implementing framing logic with a general-purpose microcontroller. Keep the receiver close to the coaxial or board-based digital input, provide clean supply decoupling, and route the recovered channels into a dedicated DAC such as the CS4461-CZZ for analog output.
پێشنیارکراو
Digital Audio Interface for Industrial Equipment
The AK4112BVF can be used in industrial audio equipment that accepts a four-channel digital audio link while operating from a low-voltage digital rail. Its 22 kHz to 108 kHz sampling range supports both control-room and high-resolution audio formats, and the dedicated AES/EBU receiver reduces firmware and logic overhead. Because industrial boards often contain switching converters and long harness connections, the input section should include appropriate source termination and protection defined by the manufacturer application guidance. Use short, matched clock and data routes, maintain a continuous ground plane beneath the interface, and keep the receiver's supply return close to the decoupling capacitors.
پێشنیارکراو
Multi-Rail Digital Audio Processing Board
The AK4112BVF is useful on a multi-rail processing board that receives digital audio and then distributes decoded channels to separate converters. Its 2.7 V to 3.6 V operation fits a dedicated 3.3 V digital rail, while the 4-channel capability allows one receiver to feed multiple downstream paths. The design should establish a low-noise reference and avoid injecting switching-node currents into the digital input region. Place input and supply decoupling capacitors near the device pins, maintain the recommended package land pattern, and route the AES/EBU clock and data as a controlled impedance pair where the source requires it. Downstream converter selection remains based on output topology and channel requirements.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AK4112BVF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AK4112BVF-E2 | AK4112VF |
|---|---|---|---|
| Package | 28-VSOP | 28-VSOP | 28-VSOP |
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Function | 4-channel AES/EBU audio receiver | 4-channel AES/EBU audio receiver | AES/EBU audio receiver |
| Digital Audio Interface | AES/EBU | AES/EBU | AES/EBU |
| Mounting Type | Surface mount | Surface mount | Surface mount |
| Pin Configuration | 28-pin VSOP | 28-pin VSOP | 28-pin configuration; verify option pins |
جیاکەرەوە سەرەکییەکان
- Integrated four-channel digital audio reception (بەراورد بەAK4112VF)
- Broad documented sampling-rate coverage (بەراورد بەAK4112BVF-E2)
- Low-voltage system integration (بەراورد بەAK4112BVF-E2)
- Compact 28-pin surface-mount implementation (بەراورد بەAK4112VF)
تێبینییەکانی دیزاین
Treat the AES/EBU clock and data nets as a timing-sensitive interface. Route them over a continuous ground reference, minimize stubs and vias, and keep the receiver close to the input connector or source device. Place input terminations where the manufacturer application circuit shows them, and avoid sharing these traces with display, relay, or switching-control signals. The recovered audio quality can be affected by reflected transitions and clock jitter even when the schematic connection is correct.
Place the supply-decoupling capacitors immediately adjacent to the AK4112BVF power and ground pins, using the values and layout shown in the manufacturer datasheet. Keep the 3.3 V rail free of switching-node noise and provide a direct return path from the device ground pins to the power-entry point. If analog conversion circuitry shares the board, separate the noisy converter supplies from the receiver rail or filter them locally to preserve the low-noise behavior expected from a digital audio input stage.
Do not select a receiver solely by package name. Confirm the complete ordering code, pin count, option-pin states, electrical limits, and supported operating mode in the manufacturer datasheet before releasing a PCB or substituting inventory. In particular, verify that an ordering-suffix variant does not change terminal finish, quality level, or customer-specific configuration requirements. For prototype-to-production transitions, preserve the exact approved part number in the bill of materials and purchasing records.
زانیاری پابەندبوون
No explicit RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for this exact ordering code. AEC-Q100 is not applicable to this audio receiver function.