بەرهەمەکان (190+)

AD1938YSTZ - 4ADC/8DAC 192kHz 24-Bit Audio CODEC LQFP-48 | ADI
AD1938YSTZ

AD1938YSTZ - 4ADC/8DAC 192kHz 24-Bit Audio CODEC LQFP-48 | ADI

The Analog Devices AD1938YSTZ is a high-performance single-chip audio codec that integrates 4 analog-to-digital converters (ADCs) with differential inputs and 8 digital-to-analog converters (DACs) with single-ended outputs, housed in a 48-lead LQFP (7x7 mm) package. The device supports sample rates from 8 kHz to 192 kHz at 24-bit resolution, operates from a single 3.3 V supply (with 5 V tolerant logic inputs), and is controlled via an SPI port. An audio CODEC (coder-decoder) is a mixed-signal IC that converts analog audio signals to digital and digital audio signals back to analog, sitting at the intersection of the signal chain between analog transducers (microphones, amplifiers, speakers) and the digital signal processor (DSP) or microcontroller. The AD1938 belongs to the broader category of audio interface ICs, specifically the multi-channel CODEC family, and sits within Analog Devices' precision signal-chain portfolio for professional and prosumer audio. Key features of the AD1938 include 107 dB DAC dynamic range and SNR, 107 dB ADC dynamic range, -94 dB THD+N, a low-EMI design with on-chip PLL for flexible clock generation, software-controllable clickless mute, a logarithmic volume control with autoramp function, and master/slave modes supporting up to 16 devices on a single TDM bus. The codec also integrates TDM, I2S, left-justified, and right-justified serial audio interface modes. The AD1938 employs Analog Devices' patented multibit sigma-delta (Σ-Δ) modulator architecture with a switched-capacitor DAC topology. The integrated PLL allows direct MCLK input up to 27 MHz or generation of internal clocks from a 256 x Fs reference, simplifying board-level clock trees in multi-codec systems. The differential ADC input paths maximize common-mode rejection for balanced microphone or line-level capture. Typical applications include automotive head units and infotainment systems, AV receivers, multichannel mixing consoles, musical instrument amplifiers, effects processors, and broadcast audio equipment. The single 3.3 V supply and 5 V tolerant digital inputs simplify integration into mixed-voltage systems alongside host DSPs or microcontrollers. When designing with the AD1938, ensure adequate decoupling on both AVDD and DVDD rails (typically 10 uF bulk plus 0.1 uF ceramic per pin) and place the master-clock reference within 50 ppm tolerance to avoid PLL jitter. For TDM cascading above 8 channels, the AD1938 can serve as a master driving up to 15 additional slave codecs on a shared data line. This page synthesizes distributor pricing, drop-in same-package alternatives, SPI register notes, and PCB-layout guidance not found in the manufacturer datasheet, providing a 360-degree engineering reference for sourcing the AD1938YSTZ.

RFQ پەیوەندی
AK4101AVQ - Quad 192kHz 24-Bit Audio DIT | AKM
AK4101AVQ

AK4101AVQ - Quad 192kHz 24-Bit Audio DIT | AKM

Asahi Kasei Microdevices/AKM AK4101AVQ is a four-output digital audio transmitter (DIT) for professional audio and digital audio equipment. It supports operation up to a 192 kHz sample rate with 24-bit audio data and provides four transmitter outputs. The device supports AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface standards, placing it in the digital audio interface hierarchy of audio codec, interface IC, and semiconductor. A digital audio transmitter converts an internal digital audio stream into standards-compliant digital audio outputs for transmission or routing. The AK4101A family provides four output channels, allowing one transmitter IC to serve multichannel systems without requiring four separate single-output devices. Support for AES3 and IEC60958 is valuable in professional studio equipment, broadcast consoles, digital mixers, and format converters that exchange 24-bit digital audio over balanced digital connections. The AK4101AVQ supports data rates corresponding to sample rates up to 192 kHz and 24-bit operation. Its four-output architecture consolidates multiple digital audio paths into one 44-LQFP package, potentially reducing board area and simplifying system-level routing compared with four discrete transmitter packages. The 44-pin LQFP uses a 0.8 mm pitch and is specified for temperatures from -40 °C to +85 °C, supporting industrial as well as commercial equipment. The transmitter implements digital interface standards rather than analog-to-digital or digital-to-analog conversion. Consequently, its principal design considerations are input and output data timing, supported channel formats, clock and mode configuration, signal integrity across digital audio connections, and correct mapping of audio frames across the four outputs. These considerations are distinct from analog audio mixer and DAC designs, where converter resolution and analog signal integrity dominate device selection. Typical applications include professional digital mixers, multichannel audio routing equipment, broadcast consoles, digital recording interfaces, sample-rate converters, and studio monitor systems. Four outputs allow several routed channels to share one transmitter package, provided that all attached receivers support the selected format and that the system channel map is configured consistently. For PCB implementation, follow the manufacturer pin-description and application-circuit tables when assigning data, clock, control, and power pins. Preserve the recommended interface topology, provide adequate decoupling at the supply pins, and route high-speed digital audio signals with continuous reference planes. Confirm the selected output standard, master-clock relationship, channel mapping, and sample rate against the receiver connected to each output before releasing the production design. This page consolidates the documented AK4101AVQ capabilities, standards support, package information, application context, and sourcing guidance into an engineering-focused product record. It also distinguishes verified device functions from parameters that require confirmation from the complete manufacturer datasheet or an application-specific design review.

RFQ پەیوەندی
AK4104ET - 192kHz 24-Bit 3.3V DIT | Asahi Kasei
AK4104ET

AK4104ET - 192kHz 24-Bit 3.3V DIT | Asahi Kasei

Asahi Kasei Microsystems AK4104ET is a one-channel digital audio interface transmitter operating at up to 192kHz with 24-bit audio data and a 3.3V supply, packaged in a 16-pin TSSOP. It supports AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface standards. A digital audio interface transmitter, or DIT, is an interface IC that accepts digital audio data and converts it into a standardized serial digital-audio stream. In the hierarchy, a DIT is a digital audio transmitter within the broader class of interface ICs and audio codecs. It is commonly used where a converter, processor, or digital audio source must deliver audio through a standardized digital connection. The AK4104 supports sample-rate operation to 192kHz and 24-bit audio resolution. Its audio serial port supports four formats, allowing the host interface to select an appropriate data arrangement. The verified distributor listing identifies the device as a one-channel digital audio transmitter in a 16-TSSOP package, while the manufacturer datasheet identifies AES3, IEC60958, S/PDIF, and EIAJ CP1201 compatibility. The 3.3V operating supply is suitable for low-voltage digital audio equipment where the transmitter must operate from a 3.3V rail. Digital audio standards commonly used with this class of device include S/PDIF for consumer equipment and professional digital audio links. Exact input and output logic levels, timing limits, and electrical characteristics should be confirmed in the manufacturer datasheet before final PCB sign-off. Typical applications include consumer electronics, professional audio equipment, digital mixers, audio conversion systems, home-theater products, and digital audio source or receiver equipment. The AK4104ET is also relevant when an existing design needs a dedicated transmitter rather than a general-purpose codec. A key design consideration is interface timing and grounding. The host must provide correctly formatted audio data, clocking, and control signals, while the digital output should be routed with controlled impedance and a properly terminated transmission line when required by the selected standard. Verify the exact pinout and recommended external components against the manufacturer datasheet. This page combines verified manufacturer and distributor information, standards context, pricing availability, and design guidance. It also clearly separates confirmed specifications from parameters that require additional datasheet data rather than presenting unsupported assumptions.

RFQ پەیوەندی
AK4112BVF 4-Channel AES/EBU Audio Receiver | AKM
AK4112BVF

AK4112BVF 4-Channel AES/EBU Audio Receiver | AKM

The Asahi Kasei Microdevices AK4112BVF is a 4-channel audio receiver designed for digital audio reception in professional and consumer electronics. The device operates from a 2.7 V to 3.6 V supply, supports sampling frequencies from 22 kHz to 108 kHz, and is housed in a 28-pin VSOP surface-mount package. Its primary function is the reception and decoding of digital audio data carried by the AES/EBU interface used by CD, DVD, broadcast, and professional audio equipment. An AES/EBU receiver is an interface IC that accepts serial digital audio data, extracts clock and framing information, and converts the encoded transmission into a form that can be processed by a decoder, DAC, or audio signal-chain device. In the product hierarchy, the AK4112BVF belongs to the audio special-purpose IC class, which sits below audio interface ICs and above general-purpose digital audio converters. The AK4112BVF provides a 4-channel digital audio receiver in a single device, reducing the component count in systems that previously required separate receivers for multiple channels. Its 2.7 V to 3.6 V operating range supports low-voltage digital audio systems, while the 22 kHz to 108 kHz sampling-rate range covers standard CD, DVD, and high-resolution multichannel audio streams. The 28-VSOP package provides a compact surface-mount footprint for equipment with limited board area. The receiver is suited to digital audio systems operating at 48 kHz, 96 kHz, and 108 kHz sampling rates, where multiple channels must be recovered from a single digital audio link. Its interface role also makes it applicable to digital audio monitoring, home-theater front ends, broadcast equipment, and professional sound systems. System clocking and signal-integrity implementation remain the responsibility of the host circuit. Careful layout is essential because the AES/EBU interface carries high-frequency clock and data signals. Route the serial data and clock lines away from analog outputs, switching-regulator inductors, and other noisy circuits. Follow the manufacturer datasheet for input termination, decoupling, grounding, and exposed-pad or thermal-pad recommendations applicable to the 28-pin package. This page combines the AK4112BVF interface specifications, verified distributor listings, drop-in family options, application guidance, and practical layout considerations. It is intended to help engineers identify the correct package variant, plan the receiving stage, and evaluate replacement options without relying on a generic distributor description.

RFQ پەیوەندی
AK4112BVM - 24-Bit 4-Channel Audio Receiver | AKM
AK4112BVM

AK4112BVM - 24-Bit 4-Channel Audio Receiver | AKM

The Asahi Kasei Microdevices AK4112BVM is a four-channel digital audio receiver built around the AKM AK4112B architecture and packaged in a 28-pin SSOP. It is designed to receive digital audio streams and provide the decoding and digital-interface functions required by multi-channel audio systems. The manufacturer datasheet identifies the device as a 24-bit DIR with operation up to 96 kHz, making it applicable to consumer electronics, broadcast equipment, and digital audio products that process standard high-resolution PCM streams. A digital audio receiver, abbreviated DIR, converts a serial digital audio stream into the internal PCM representation used by audio processing, storage, and playback systems. Within the broader semiconductor hierarchy, the AK4112BVM belongs to the audio interface IC category, with the DIR function providing a bridge between external digital-audio transports and downstream digital signal processing. Its four-channel architecture allows multiple synchronized audio channels to be handled by one receiver rather than through separate single-channel devices. The AK4112BVM supports 24-bit audio processing and sampling frequencies up to 96 kHz. These figures define the principal signal-fidelity and bandwidth requirements of the receiver. The four-channel capability is particularly useful in surround-sound and multi-zone audio equipment, where several channels must share a common device. As a dedicated audio interface IC, the part can simplify clocking and channel management compared with implementing equivalent receiver functions in programmable logic or a general-purpose processor. The AK4112BVM integrates digital audio reception with the AK4112B function set in a compact 28-SSOP package. The package gives an equipment designer a traditional surface-mount implementation with a 28-pin lead arrangement. Because digital audio receivers depend on stable clocking and correctly matched input timing, power-supply sequencing, grounding, and signal routing remain as important as the nominal sample-rate capability. The receiver should be placed according to the manufacturer's pin-description and application-circuit guidance rather than treated as a generic logic IC. Typical applications include digital audio equipment, home-theater and surround-sound processors, broadcast and professional audio equipment, recording-system interfaces, and other products receiving multiple channels of PCM digital audio. At 96 kHz and 24-bit resolution, the device addresses high-resolution audio use cases while retaining the relatively compact package and integrated four-channel receiver architecture. The exact clock requirements, supported digital-audio formats, and signal-level details should be confirmed in the manufacturer datasheet before finalizing a system design. A key design consideration is the relationship between the digital-audio source, the receiver clock, and downstream logic. Route the digital input with controlled impedance, keep return paths continuous, and place required bypass and interface components close to their associated pins. Where the receiver operates near the limits of its supported sampling rate or clock ratio, verify timing margins and jitter tolerance in system-level testing rather than relying only on nominal resolution and frequency figures. This page combines the verified AK4112BVM package and receiver information with practical application guidance, pinout and datasheet access guidance, design considerations, and qualified replacement analysis. It is intended to help engineers identify whether the AK4112BVM fits a four-channel, 24-bit digital-audio design before requesting a quotation or committing the part to a new PCB layout.

RFQ پەیوەندی
AK4113VF - 24-Bit 216kHz DIR Audio Receiver | AKM
AK4113VF

AK4113VF - 24-Bit 216kHz DIR Audio Receiver | AKM

Asahi Kasei Microsystems AK4113VF is a 24-bit stereo digital audio receiver with a 6:1 input selector and support for sampling rates up to 216kHz. It receives digital audio streams, decodes channel-status information, and provides an audio interface for downstream signal processing. The device is identified as a 192kHz 24-bit DIR with 6:1 selector in the retrieved product documentation. A digital audio interface receiver, or DIR, converts a serial digital-audio stream into a form suitable for the next stage of an audio system. In the hierarchy of audio semiconductors, a DIR is a digital-audio input interface, while a DAC is its complementary digital-to-analog converter. The AK4113VF is therefore positioned between an upstream digital source and downstream audio processing, conversion, or monitoring circuitry. The verified information identifies the AK4113VF as a 24-bit stereo receiver supporting rates up to 216kHz and providing a 6:1 selector. The retrieved technical description also states that the channel-status decoder supports consumer and professional modes and that the device automatically detects non-PCM bit streams. These features make it relevant to professional audio equipment, broadcast infrastructure, studio converters, and digital audio routing systems. The AK4113VF is not a power semiconductor, so a safe-operating-area chart is not applicable. Its package and electrical details must be confirmed against the manufacturer datasheet for the exact ordering variant. The retrieved datasheet listing identifies the package as a 30-pin VSOP with 0.65mm pitch. The available product results also reference an evaluation board and associated control, clock, and serial-interface signals. A typical signal chain places the AK4113VF after a digital-audio source and before a DAC, audio codec, DSP, or monitoring interface. The 6:1 selector can simplify front ends that must accept multiple digital sources, while the 24-bit representation preserves high-resolution audio data when the downstream system supports the corresponding word length. Digital input timing, grounding, and format compatibility remain the principal implementation considerations. This product page combines the verified AK4113VF datasheet identity, distributor listings, package information, and cross-reference search results. It also records unavailable parameters explicitly rather than estimating them, helping engineers compare the receiver against candidate replacements and evaluate whether a new PCB design or a qualified substitute is required.

RFQ پەیوەندی
AK4114VQ - 192kHz 24-Bit Digital Audio Interface | AKM
AK4114VQ

AK4114VQ - 192kHz 24-Bit Digital Audio Interface | AKM

The Asahi Kasei Microdevices AK4114VQ is a high-feature digital audio interface transceiver supporting 192 kHz sampling and 24-bit audio data in a 48-LQFP package. It decodes digital audio channel status in both consumer and professional modes and automatically detects non-PCM bitstreams. The device also identifies the recovered sampling frequency and reports it through dedicated FS3-0 output bits. A digital audio interface transceiver converts between serial digital audio and internal data formats while decoding the metadata carried within the audio stream. In the digital-audio hierarchy, the AK4114 sits between a source such as a DVD player, game console, broadcast receiver, or professional audio interface and a subsequent audio codec or signal-chain stage. Its interface handling is especially useful in home-theater and surround-sound equipment, where consumer-format AC-3 streams and professional digital-audio metadata must be recognized reliably. The AK4114 supports operation up to 192 kHz with 24-bit resolution. According to the manufacturer datasheet, its channel-status decoder handles both consumer and professional modes, while automatic non-PCM detection identifies streams that require handling outside ordinary PCM audio decoding. Sampling-frequency detection can use either clock comparison against the crystal oscillator or sampling-frequency information contained in channel status; these methods are selected through the XTL1,0 control bits. For AC-3 system designs, the manufacturer describes combining the AK4114 with the AK4527B or AK4529 multichannel audio codec. The AK4114 provides interface recognition and channel-status decoding, while the companion codec performs the associated multichannel audio conversion. Dedicated configuration pins and a serial microprocessor interface provide additional control options for integrating the transceiver into system-specific control schemes. Typical uses include DVD and Blu-ray disc player audio interfaces, surround-sound home-theater receivers, game consoles, broadcast and professional audio equipment, and AC-3 decoder subsystems. Design the PCB with short, controlled clock and data routes, provide a stable crystal reference, and use the pin-function table in the manufacturer datasheet when assigning tracks. Confirm that the selected companion codec supports the required sample rate, channel format, and metadata mode before finalizing the system architecture.

RFQ پەیوەندی
AK4116VN 2.7-3.6V 24-Bit S/PDIF Receiver | AKM
AK4116VN

AK4116VN 2.7-3.6V 24-Bit S/PDIF Receiver | AKM

Asahi Kasei Microdevices AK4116VN is a low-power, single-channel S/PDIF digital audio receiver supporting up to 24-bit resolution and 48 kHz operation. It operates from a 2.7 V to 3.6 V supply and is packaged in a 20-VFQFN package measuring 4.2 mm by 4.2 mm. The device accepts S/PDIF or AES/EBU digital audio signals and provides a channel-status decoder supporting consumer and professional modes. A digital audio receiver is an interface IC that recovers clock and audio data from a serial digital-audio stream. In the broader electronics hierarchy, it belongs to audio interface ICs, interface ICs, and semiconductors. Its role is to convert an S/PDIF signal into a parallel or serial digital-audio representation suitable for an audio codec, DSP, ADC, or digital signal-processing system. This makes the AK4116VN useful when a board must accept a digital audio source while preserving channel-status information. Key features include support for resolution to 24 bit, operation at 48 kHz, automatic detection of a non-PCM bit stream, and support for both consumer and professional channel-status formats. Its low-power design is appropriate for compact consumer, industrial, and embedded audio equipment where a 2.7 V to 3.6 V supply is already available. The 20-pin VFQFN construction also supports dense, surface-mount PCB layouts. The AK4116VN is a one-channel audio receiver rather than a general-purpose codec. It is intended to receive an externally supplied digital stream, recover timing information, decode channel status, and present audio data to downstream logic. A system designer must therefore provide compatible clocking, grounding, input conditioning, and output-routing arrangements around the device rather than treating it as a complete audio signal chain. Typical applications include digital-audio input for home theater equipment, multichannel receivers, active speakers, recording interfaces, professional audio equipment, and embedded media systems. The 24-bit capability suits modern consumer and professional digital-audio links, while automatic non-PCM detection helps distinguish linear PCM from encoded or compressed transfers. When designing around this IC, verify the complete pinout, input format, clock requirements, and output timing against the manufacturer datasheet before layout release. In particular, treat S/PDIF signal integrity, supply decoupling, and the distinction between consumer and professional channel status as key design checks rather than assumptions. This page consolidates verified AKM device data, sourcing links, replacement analysis, and application guidance for engineers evaluating the AK4116VN. It also distinguishes documented characteristics from parameters that require confirmation from the full manufacturer datasheet.

RFQ پەیوەندی
AK4117VF - 192kHz 24-Bit S/PDIF Receiver | AKM Semiconductor
AK4117VF

AK4117VF - 192kHz 24-Bit S/PDIF Receiver | AKM Semiconductor

AK4117VF is a low-power 192kHz digital audio receiver from AKM Semiconductor, with support for S/PDIF and AES/EBU streams up to 24-bit resolution in a 24-LSSOP package. The receiver operates from a 2.7V to 3.6V supply and covers sample rates from 32kHz to 192kHz. A digital audio receiver is an interface IC that recovers timing and audio data from a serial digital stream, commonly called S/PDIF, AES/EBU, or professional digital audio. It converts the incoming serial representation into a parallel PCM output that can be connected to an audio codec, processor, converter, or digital recording system. AK4117VF belongs to the interface IC hierarchy and combines input conditioning, clock recovery, data detection, and status handling in one device. Key features include 24-bit data handling, sample-rate support through 192kHz, and an integrated channel-status decoder. The decoder supports consumer and professional modes and can automatically identify a non-PCM bit stream. These capabilities make the receiver useful in digital audio equipment, surround-sound systems, broadcast equipment, and professional audio interfaces. The AK4117 is designed to pair with a multi-channel audio codec. AKM identifies the AK4527B and AK4529 as example companion devices for building a complete AC-3 system. This modular arrangement separates digital stream reception from analog or multichannel conversion, allowing the receiver to feed audio data into a codec selected for the required channel count and output topology. Electrical design should preserve the integrity of the incoming digital-audio connection. The receiver operates from a narrow 2.7V to 3.6V range, so supply regulation and decoupling are important. Board layout should keep the digital input route short, provide a continuous ground reference, and follow the manufacturer’s recommended pin and layout guidance to avoid data errors. This page combines the verified AK4117VF specifications, manufacturer datasheet information, procurement references, and application guidance. It also distinguishes documented drop-in alternatives from unverified functional equivalents so engineers can make package- and pin-compatible decisions with fewer assumptions.

RFQ پەیوەندی
AK4120VF - 20-Bit 48 kHz Audio SRC | Asahi Kasei
AK4120VF

AK4120VF - 20-Bit 48 kHz Audio SRC | Asahi Kasei

The Asahi Kasei Microdevices AK4120VF is a 20-bit, 48 kHz-class audio sample-rate converter with integrated mixer and volume functions, supplied in a 24-VSOP package. Its verified 2.7 V to 3.6 V analog supply range and 8 kHz to 96 kHz operating sample-rate range place it in the audio interface and signal-conversion category, where it can reconcile digital audio streams operating at different clock domains. A sample-rate converter, commonly abbreviated SRC, is an interface IC that converts audio samples from one sampling frequency to another. In the product hierarchy, an SRC sits between a digital audio interface and a clock-conversion function; unlike a general-purpose codec, the converter concentrates on format-compatible rate conversion, clocking, and associated mixing or gain control rather than performing analog-to-digital or digital-to-analog conversion. This distinction is important when selecting an SRC for a consumer, broadcast, automotive, or industrial audio system. The AK4120VF combines a 20-bit converter with a mixer and volume control in one device. These functions allow adjacent digital audio paths to be combined and level-adjusted before or during rate conversion, reducing the need for separate digital mixer packages in designs where routing flexibility is required. The converter is specified for sample rates from 8 kHz through 96 kHz and uses a 24-LSSOP, also identified by distributors as 24-VSOP, measuring approximately 0.220 inch by 0.220 inch in body width. The 2.7 V to 3.6 V operating supply supports integration with low-voltage digital audio systems. The verified operating temperature range is -40 °C to +85 °C, covering industrial temperature conditions. Its 24-pin surface-mount format is suited to compact audio boards where a through-hole package would be impractical. Typical uses include digital audio distribution, clock-domain adaptation between source and destination equipment, consumer audio receivers, broadcast and professional audio equipment, and automotive infotainment subsystems. When using the device, the system clock tree and digital audio interface format must be configured consistently with the manufacturer data sheet. Decoupling should follow the application circuit and layout guidance in that document rather than generic assumptions. This page consolidates the verified package, electrical-supply, resolution, sample-rate, temperature, and commercial-availability information into an engineering-oriented reference. It also distinguishes same-family AKM alternatives from a verified drop-in claim and flags pricing and detailed pin-level information that were not present in the supplied source data.

RFQ پەیوەندی
AK4122AVQ - 24-Bit 96kHz SRC with DIR | AKM Semiconductor
AK4122AVQ

AK4122AVQ - 24-Bit 96kHz SRC with DIR | AKM Semiconductor

AKM Semiconductor AK4122AVQ is a one-channel, 24-bit digital audio sample rate converter with an integrated digital audio receiver, supplied in a 48-LQFP surface-mount package measuring 7 mm by 7 mm. The device accepts input sample rates from 8 kHz to 96 kHz and produces output sample rates of 32 kHz, 44.1 kHz, 48 kHz or 96 kHz. Its internal PLL allows operation in slave mode without an external master clock. A sample rate converter, or SRC, is a digital audio interface device that resamples digital audio data from one clock domain to another. The AK4122AVQ combines this function with a digital audio receiver, or DIR, in one IC. Together, these blocks form part of the broader digital-audio signal chain: digital audio interface IC → sample rate converter → digital audio receiver → audio codec or digital signal processor. The primary functional characteristics are one-channel processing, 24-bit audio resolution, and operation up to 96 kHz. Input rates cover the commonly used 8 kHz through 96 kHz range, while selectable output rates include 32 kHz, 44.1 kHz, 48 kHz and 96 kHz. An internal phase-locked loop simplifies systems that previously required a separate master-clock source when the converter operates in slave mode. The AK4122AVQ is intended for digital audio equipment where source and destination clocks differ. Its architecture is based on a digital sample-rate-conversion stage and an integrated DIR rather than an analog conversion path. The DIR receives digital audio data and extracts timing information, while the SRC performs the rate conversion needed to align the incoming stream with the selected output rate. Typical uses include professional digital audio equipment, consumer audio processors, broadcast and recording interfaces, USB or network-audio bridges, and clock-conversion stages within multichannel audio systems. It is especially relevant when an upstream source produces 8 kHz to 96 kHz data while the downstream audio path requires one of the standard output rates. PCB implementation requires careful assignment of digital audio data, control signals, clock signals and power according to the manufacturer pin-description table. Decoupling should follow the datasheet's recommended network, while audio-clock and data traces should be routed with controlled impedance and minimized crosstalk to preserve signal integrity. This product page combines the device's stated conversion rates, digital-audio architecture, package information and practical design considerations. It also distinguishes verified production parameters from specifications that require confirmation in the manufacturer datasheet before schematic release or PCB sign-off.

RFQ پەیوەندی
AK4125VF - 192kHz 24-Bit Stereo Audio SRC | AKM
AK4125VF

AK4125VF - 192kHz 24-Bit Stereo Audio SRC | AKM

The Asahi Kasei Microdevices AK4125VF is a stereo asynchronous digital audio sample rate converter with support for input and output rates from 8 kHz to 216 kHz and 24-bit data resolution, supplied in a 30-VSOP package. It converts between asynchronous clock domains so a digital audio system can operate its ADC, DAC, transport, or processor at different sampling rates while maintaining a common digital audio interface. A sample rate converter is an interface IC that changes the numerical sampling rate of a digital audio stream without requiring analog reconversion. Within the signal-chain hierarchy of semiconductor, interface IC, audio codec, and digital audio converter, the AK4125VF sits between source and destination audio devices. Its asynchronous operation allows the source and destination clocks to differ, making it useful in digital audio routing, recording, playback, broadcast, and consumer-equipment architectures. The verified product listing identifies the AK4125VF as a 2-channel, 24-bit converter reaching 192 kHz, with the device described as a high-performance asynchronous sample rate converter. Its input and output sample-rate coverage of 8 kHz through 216 kHz provides useful flexibility for studio, broadcast, and multimedia clock domains. The 30-VSOP, 0.220-inch, 5.60 mm-wide package is suitable for compact surface-mount audio equipment, although its pin count requires careful routing and connector-style layout planning. AK4125VF uses digital audio interfacing, with I²S identified in the verified distributor specification data. This makes it appropriate for systems whose source and sink expose compatible digital audio streams but cannot share a common sample-rate clock. In such designs, the converter can accept asynchronous data from one clock domain and present resampled data to another, reducing the need for redesigning the surrounding clock architecture. Typical uses include digital recording and playback interfaces, broadcast and studio signal processing, consumer audio equipment, and embedded systems that exchange audio between components operating at different rates. For each implementation, the designer must confirm clock topology, supported serial-audio format, master or slave operation, and control-interface requirements against the manufacturer datasheet before schematic signoff. A key design consideration is that asynchronous conversion does not remove the need for correct clock generation, grounding, and digital-signal routing. The source clock and destination clock should be clean, jitter-compatible signals, while the 30-pin package demands deliberate escape routing and stable supply decoupling. Validation should include sample-rate sweeps, lock behavior, word-length operation, and channel synchronization. This page consolidates verified distributor availability, package data, operating limits, and practical selection guidance. It distinguishes published AK4125VF attributes from values that still require confirmation from the manufacturer datasheet, helping engineers evaluate this converter before requesting a quote or committing a board layout.

RFQ پەیوەندی
AK4125XF - 192kHz 24-Bit Asynchronous SRC | AKM
AK4125XF

AK4125XF - 192kHz 24-Bit Asynchronous SRC | AKM

Asahi Kasei Microdevices AK4125XF is a 192 kHz, 24-bit high-performance asynchronous sample-rate-converter IC supplied in a 30-VSOP surface-mount package. The AK4125 family is designed for digital audio systems requiring conversion between different sampling frequencies, and the AK4125XF ordering code is associated with tape-and-reel production packaging. According to the indexed manufacturer datasheet, the device is specifically described as a 192 kHz/24-bit high-performance asynchronous SRC. A sample-rate converter is an audio interface IC that accepts digital audio data operating at one sample rate and produces data at another. Within the digital audio hierarchy, an asynchronous SRC sits between digital audio sources and receivers, codecs, converters, or playback equipment. The AK4125 family provides 24-bit processing and supports operation up to 192 kHz, making its application focus high-resolution digital audio rather than general-purpose signal conversion. The verified part data identifies AK4125XF as an integrated circuit and an audio channel device. Its defining verified characteristics are the 192 kHz maximum sampling-rate indication, 24-bit resolution, asynchronous sample-rate-conversion function, 30-VSOP package, and tape-and-reel packaging. These parameters distinguish it from ordinary fixed-rate digital filters and place it in applications where clock domains or source and destination sample rates differ. AK4125XF can be considered for professional and high-fidelity digital audio paths, broadcast and recording-system sample-rate alignment, asynchronous audio clock domains, and interface bridging between equipment operating at different sampling rates. The 24-bit format supports high-resolution audio workflows, while the 192 kHz capability accommodates high-rate studio streams. Actual interoperability still depends on the selected AK4125 operating mode, supported source and destination rates, serial audio format, clocking arrangement, and external component implementation documented in the manufacturer datasheet. The 30-VSOP package supports compact surface-mount assembly, but the exposed package geometry is not represented in the available package-diagram library. Consequently, the complete pin assignment is not asserted here and must be checked against the manufacturer AK4125 datasheet before PCB routing or prototype assembly. Engineers should also confirm the selected companion clock, logic, interface, and filtering components from that datasheet rather than inferring them from the ordering code. This page consolidates the verified manufacturer and distributor information for AK4125XF, including the 192 kHz/24-bit asynchronous SRC description, package information, sourcing links, application guidance, and confirmed site-listed related parts. It separates verified facts from parameters that still require datasheet confirmation, helping engineers identify the correct audio converter and plan a compliant PCB design without treating unverified electrical details as guaranteed specifications.

RFQ پەیوەندی
AK4127VF - 192kHz 24-Bit Stereo Asynchronous SRC | AKM
AK4127VF

AK4127VF - 192kHz 24-Bit Stereo Asynchronous SRC | AKM

The Asahi Kasei Microdevices AK4127VF is a 192kHz, 24-bit high-performance stereo asynchronous sample-rate converter with an internal PLL, supplied in a 30-pin VSOP package. It converts digital audio streams between input and output sampling rates ranging from 8kHz to 216kHz. Its primary role is clock-domain adaptation and asynchronous audio-rate conversion rather than analog amplification or DAC conversion. A digital sample-rate converter, or SRC, changes the sampling rate of a digital audio stream while preserving the represented signal. In an audio signal chain, an SRC sits between digital audio sources and receivers such as a DAC, codec, recorder, or playback engine. It helps reconcile mismatched clocks and rates while adding asynchronous rate conversion and phase-locked-loop synchronization functions. The AK4127VF supports stereo operation, 24-bit processing, and sample rates up to 192kHz according to the verified product description. Its internal PLL simplifies system configuration by helping establish the required digital audio timing. The device is intended for asynchronous audio applications where source and destination rates differ and predictable clock recovery is required. The AK4127VF is packaged in a 30-pin VSOP, also identified in distributor data as a 30-VSOP. The verified sources describe the part as an audio special-purpose or audio sample-rate converter IC. It is relevant to professional audio equipment, digital recording systems, broadcast and networking equipment, and other systems requiring digital audio format and clock-rate adaptation. Designers should verify the complete electrical interface, pinout, supported digital audio formats, clock requirements, supply rails, and control protocol against the manufacturer datasheet before layout. Because the supplied data does not include all pin-level electrical limits or interface timing values, those details are intentionally marked as needed rather than inferred. This page summarizes verified product positioning and source data for AK4127VF evaluation.

RFQ پەیوەندی
AK4128AEQ - 8-Ch 216kHz 24-Bit Audio SRC | AKM
AK4128AEQ

AK4128AEQ - 8-Ch 216kHz 24-Bit Audio SRC | AKM

The Asahi Kasei Microdevices AK4128AEQ is an eight-channel, 24-bit asynchronous digital sample-rate converter operating at sampling rates from 8 kHz to 216 kHz. The device accepts simultaneous asynchronous stereo audio streams, converts them to a common output sampling rate, and is packaged in a 64-pin LQFP measuring 10 mm by 10 mm. A digital sample-rate converter, or SRC, is a data-conversion IC that recalculates audio samples from one clock domain and sampling rate into another. The AK4128AEQ sits within the digital-audio signal chain between sources, codecs, DACs, and recording systems. It reduces the need for a shared master clock when devices use different clocks or when multiple asynchronous streams must be aligned to one output rate. The AK4128AEQ provides eight processing channels, 24-bit resolution, and a maximum sampling rate of 216 kHz. Its internal oscillator eliminates the requirement for an external master clock, while master mode and TDM data interfaces support simultaneous operation with multiple channels. These characteristics make the converter suitable for high-end car audio, DVD recorders, broadcast equipment, and professional digital-audio systems. The converter performs asynchronous sample-rate conversion rather than simply passing data through. Input samples may be supplied at independent rates between 8 kHz and 216 kHz, and the output operates in the same 8 kHz-to-216 kHz range. The internal clocking architecture therefore supports system simplification when upstream and downstream converters do not share a common clock source. Typical uses include multichannel automotive infotainment systems, high-resolution audio recorders, professional monitoring equipment, and broadcast consoles. Eight-channel operation reduces the number of discrete converters required when several audio domains are present. TDM support also provides a practical route to carrying multiple synchronized channels over a compact digital connection. When designing the PCB, route clock, data, and power connections according to the pin-description table in the manufacturer datasheet. Keep digital return paths controlled and place decoupling capacitors close to the supply pins. Confirm the selected operating mode, sample-rate ratios, and digital audio formats against the device configuration tables before finalizing the system clocking scheme.

RFQ پەیوەندی
AK4136VQ - 2-Channel 384kHz 32-Bit SRC | AKM
AK4136VQ

AK4136VQ - 2-Channel 384kHz 32-Bit SRC | AKM

The Asahi Kasei Microsystems AK4136VQ is a 2-channel asynchronous digital audio sample rate converter operating from 8kHz to 384kHz, processing up to 32-bit audio data in a 48-LQFP package. Its internal oscillator eliminates the need for an external master clock when used in asynchronous systems, simplifying clock-domain conversion between source and destination audio devices. A digital sample rate converter, or SRC, is an interface IC that resamples and filters digital audio between clocks with different frequencies. In the product hierarchy, a SRC belongs to digital audio signal-processing ICs and supports audio converters, receivers, network-audio equipment, and test systems. The AK4136 is particularly useful when a transmitter or player uses a different clock domain from the audio source. The AK4136 supports two channels, 32-bit audio processing, and input and output sample rates spanning 8kHz through 384kHz. According to the manufacturer datasheet, its internal oscillator means that external master clocks are not required for asynchronous conversion. This can reduce clock-tree complexity, although the converter still requires correct power, ground, digital-interface, and signal-integrity implementation. The 32-bit format and 384kHz maximum rate suit high-resolution audio paths, studio equipment, broadcast infrastructure, digital audio workstations, and consumer systems that need format or clock-domain adaptation. A practical design must still account for required input and output formats, supported clock configurations, filter behavior, grounding, decoupling, and signal routing; those details must be checked in the complete manufacturer documentation. The principal design consideration is integration. The AK4136VQ can simplify systems where input and output rates are unrelated because its internal oscillator supports asynchronous operation. This avoids one external master-clock source, but it does not eliminate the need for stable local supplies, short digital traces, controlled return paths, and verification of the converter configuration during startup. This page consolidates the verified manufacturer datasheet, distributor availability, package information, technical search context, and practical engineering guidance. It intentionally avoids asserting electrical, pin, lifecycle, or drop-in replacement details that were not present in the supplied source data.

RFQ پەیوەندی
AK4137EQ - 2-Channel 32-Bit 768kHz Audio SRC | AKM
AK4137EQ

AK4137EQ - 2-Channel 32-Bit 768kHz Audio SRC | AKM

The Asahi Kasei Microdevices AK4137EQ is a two-channel digital sample rate converter supporting input and output sample rates from 8kHz to 768kHz, with 32-bit processing and PCM-DSD conversion capability in a 48-LQFP 7x7 mm package. It is designed for high-end audio systems, USB-DACs, and digital-audio equipment that must reconcile different sampling domains. A digital sample rate converter is an interface IC that resamples or changes the clock rate of digital audio data between incompatible source and destination rates. The AK4137EQ includes an internal oscillator, so it does not require an external master clock for its asynchronous conversion operation. This simplifies system configuration when the source and destination audio domains use unrelated clocks. Key features include two-channel operation, 32-bit sample processing, asynchronous conversion, input and output rates spanning 8kHz to 768kHz, and PCM-DSD data conversion. The internal oscillator reduces external clock infrastructure, while the broad sample-rate range supports professional audio, USB-DAC, and multirate digital-audio designs. The device is supplied in a 48-LQFP package identified by DigiKey as 48-LQFP (7x7). The AK4137EQ is intended for applications where audio data arrives from a source clock domain and must be delivered to a DAC, decoder, recorder, or other digital-audio subsystem operating at another rate. Its sample-rate flexibility makes it useful for format bridging, asynchronous playback paths, and PCM-to-DSD or DSD-to-PCM conversion as described by the manufacturer. Designers should verify the complete pinout, interface logic, clock requirements, supported audio formats, control signaling, and electrical limits against the manufacturer datasheet before layout or firmware implementation. The available verified sources do not provide complete pricing, pin-level assignments, or detailed timing tables, so those values remain data-needed rather than inferred.

RFQ پەیوەندی
AK4140VF - 24-Pin Digital BTSC Decoder | Asahi Kasei Microdevices
AK4140VF

AK4140VF - 24-Pin Digital BTSC Decoder | Asahi Kasei Microdevices

Asahi Kasei Microdevices AK4140VF is a digital BTSC decoder integrated circuit packaged in a 24-pin VSOP configuration. Its primary role is decoding broadcast television sound signals processed through the Broadcast Television Sound System (BTSC) framework. The AK4140VF combines digital decoding functionality into a compact surface-mount package suited to television receivers, video equipment, and other consumer systems that incorporate compatible BTSC audio processing. A BTSC decoder is a signal-processing semiconductor that converts encoded broadcast audio into usable audio channels. In the broader product hierarchy, it belongs to the decoder IC and digital audio decoder family, which falls within integrated circuits and consumer audio signal-chain devices. Unlike a general-purpose microprocessor, the AK4140VF is designed around a defined broadcast-audio decoding function, allowing television and video manufacturers to add compatible audio reception without implementing the complete decoding process in general-purpose logic. The AK4140VF is identified in the product listing as a digital BTSC decoder and is offered in a 24-pin VSOP package. Tape-and-reel ordering associated with the AK4140VF-E2 designation provides a production-oriented package option for automated assembly. The VSOP-24 format supports a compact board footprint while exposing 24 electrical connection positions. Exact electrical ratings, clock requirements, interface voltages, and decoder performance figures must be taken from the manufacturer datasheet before a new design is released. The component occupies the television audio signal path between compatible received broadcast information and the system's audio output stages. Its dedicated decoder architecture can reduce the processing burden placed on a system controller compared with a software-driven implementation. A hardware decoder may also provide predictable execution independent of general-purpose processor workload, although final audio quality and channel behavior depend on the complete receiver design rather than on the integrated circuit alone. Typical applications include analog and digital television receivers, video receivers, broadcast monitoring equipment, and television products supporting BTSC-compatible audio decoding. Because the AK4140VF is a legacy consumer broadcast-audio device, engineers should confirm lifecycle status, sourcing continuity, and exact orderable suffix requirements before committing a new production design. Existing equipment can use the part for maintenance when the package, pin configuration, and electrical conditions match the original assembly. The most important design check is exact pin compatibility. Do not infer interchangeability from the shared AK4140 family name alone: compare every power pin, ground connection, interface signal, timing requirement, and package dimension against the original schematic and datasheet. Preserve the manufacturer-recommended decoupling and signal-routing layout, particularly around the audio decoder and its external support components. This page consolidates the AK4140VF product identity, digital BTSC decoder function, 24-pin VSOP package information, verified source links, application context, and replacement-review criteria. It is intended to help engineers locate documentation and evaluate whether an existing board can reuse the device without requiring a redesign.

RFQ پەیوەندی
AK4528VM 24-Bit 96kHz Stereo Audio Codec | AKM Semiconductor
AK4528VM

AK4528VM 24-Bit 96kHz Stereo Audio Codec | AKM Semiconductor

AKM Semiconductor AK4528VM is a high-performance 24-bit, 96 kHz stereo audio codec integrating one analog-to-digital converter and one digital-to-analog converter in a 28-pin SSOP package. The device supports serial digital audio, sigma-delta conversion, and a sampling rate of 96 kHz for professional recording, playback, and signal-conversion equipment. An audio codec is an interface IC that converts analog audio signals into digital data and reconstructs digital audio into analog output. In the broader semiconductor hierarchy, the AK4528VM belongs to the audio-codec class of interface ICs, combining data converters, digital interfaces, analog circuitry, and clocking functions within one device. The ADC uses AKM's Enhanced Dual Bit architecture and is described as providing a wide dynamic range. The DAC uses the Advanced Multi Bit architecture with switched-capacitor-filter techniques to achieve low out-of-band noise and high jitter tolerance. These features target audio systems where converter noise, clock jitter, and spectral purity influence recording and playback quality. The AK4528VM supports 24-bit audio data and operation up to 96 kHz. Its sigma-delta conversion approach places noise shaping around the audio band, while the multistage DAC architecture reduces out-of-band energy and improves tolerance to timing variation. Exact dynamic-range, distortion, clock, voltage, and power-consumption limits should be taken from the manufacturer datasheet for the selected operating mode. Typical uses include stereo recording-system analog front ends, digital mixing consoles, professional audio interfaces, studio monitors, and multichannel digital recording equipment. The AK4528VM is particularly relevant when one board-level component must provide both analog-to-digital and digital-to-analog conversion with a common serial audio architecture. The 28-pin SSOP package supports conventional surface-mount assembly but requires careful analog-layout practices. Differential and balanced analog paths should be routed away from the serial clock and data lines, while grounding, decoupling, and return paths should follow the recommended application circuit. The AK4528VM suffix denotes a cut-tape shipping configuration, so production purchasing should also account for reel orientation and exposed-pad requirements if an exposed pad is specified for the assembled PCB. For design planning, this product overview combines the verified 24-bit, 96 kHz, stereo-converter, package, and converter-architecture characteristics with application guidance and a package-compatible product comparison. Engineers should use the AKM Semiconductor datasheet for final electrical limits, recommended operating conditions, pin assignments, and layout values before releasing a production schematic.

RFQ پەیوەندی
AK4556VT - 24-Bit 192kHz Stereo Audio Codec | AKM
AK4556VT

AK4556VT - 24-Bit 192kHz Stereo Audio Codec | AKM

The Asahi Kasei Microdevices AK4556VT is a low-voltage, 24-bit stereo audio codec with two ADCs, two DACs, sampling-rate support up to 216 kHz, and a 20-pin TSSOP package. It delivers 103 dB ADC SNR and 106 dB DAC SNR while supporting low-voltage, battery-powered digital audio subsystems. An audio codec is a mixed-signal interface IC that converts analog microphone or line-level signals into digital PCM audio and converts digital PCM audio back into analog output signals. Within the semiconductor hierarchy, the AK4556VT belongs to the audio codec class, combines an ADC and DAC with digital audio interfaces, and ultimately serves as a power management and signal-conversion component within a digital audio subsystem. The codec's principal features include 24-bit conversion, operation at a 3 V supply, support for sampling rates through 216 kHz, and an integrated switched-capacitor filter that reduces jitter sensitivity. Its ADC path reaches 103 dB SNR, while its DAC path reaches 106 dB SNR. Single-ended analog inputs and outputs reduce pin count and simplify the external filtering and signal-chain design. The AK4556VT integrates two analog-to-digital converters and two digital-to-analog converters in one compact package. This integration allows a system to share one device for capture and playback, reducing component count and board area compared with separate ADC and DAC packages. The switched-capacitor filtering approach helps suppress sensitivity to digital clock jitter, an important consideration in systems where the audio master clock originates from a remote or asynchronous source. Typical uses include battery-powered portable audio, digital recording equipment, USB and wireless audio accessories, headset interfaces, compact consumer electronics, and embedded audio subsystems. The low 3 V operating supply is particularly useful when the codec must operate from a single-cell battery or a tightly regulated low-voltage rail. PCB design should prioritize short, quiet analog routing, solid return paths, and separation between digital clock and sensitive audio signals. Place the required bypass and analog filter components close to their associated pins, and follow the manufacturer's reference layout and component values for production designs. This product page consolidates the AK4556VT's key conversion specifications, package details, application guidance, design notes, and sourcing information. It also distinguishes true drop-in replacements from functional audio-codec alternatives that may require different packages, interfaces, or external circuitry.

RFQ پەیوەندی
AK4621EF - 24-bit 192kHz Stereo Audio CODEC | Asahi Kasei Microdevices
AK4621EF

AK4621EF - 24-bit 192kHz Stereo Audio CODEC | Asahi Kasei Microdevices

The Asahi Kasei Microdevices AK4621EF is a high-performance 24-bit stereo audio CODEC supporting up to 192 kHz recording and playback, housed in a 30-pin VSOP (LSSOP) surface-mount package. It integrates two channels of ADC and two channels of DAC on a single die, with 115 dB dynamic range on both ADC and DAC paths and supports sample rates from 8 kHz to 192 kHz. An audio CODEC is a single integrated circuit that combines an analog-to-digital converter (ADC), digital-to-analog converter (DAC), and the necessary clocking, filtering, and serial interface logic to move bidirectional audio between the analog and digital domains. In the broader component taxonomy, the AK4621EF belongs to the audio interface IC family, which sits under interface ICs and ultimately under integrated circuits. It is a sub-category of audio ICs and is specialized for professional and consumer high-fidelity stereo capture and reproduction. Key features include AKM's Enhanced Dual-Bit ADC architecture for high dynamic range and the Advanced Multi-Bit DAC architecture combined with a Switched Capacitor Filter (SCF) that suppresses out-of-band noise and improves jitter tolerance. The serial audio interface is compatible with common I2S, left-justified, and right-justified formats, and the analog supply operates from 4.75 V to 5.25 V while the digital supply operates from 3.0 V to 3.6 V. The device also includes a low-latency digital filter option and a hardware-selectable HPF for DC-offset removal on the ADC path. The architecture combines sigma-delta modulators for both ADC and DAC with on-chip digital decimation and interpolation filters. The SCF output stage of the DAC removes many of the high-frequency images associated with conventional oversampling DACs, reducing the need for aggressive external post-filtering. This combination delivers wide dynamic range with low distortion at full-scale, which is critical for transparent studio capture and playback. Typical applications include Pro Audio sound cards, Digital Audio Workstations (DAWs), DVD-R, hard-disk, and CD-R recording and playback systems, as well as musical instrument recording. The combination of high dynamic range, low latency mode, and integrated PLL makes it suitable for both consumer recording devices and semi-professional production equipment. When designing with this part, observe the separate analog and digital supply domains (5 V analog, 3.3 V digital) and decouple each with appropriate bulk and bypass capacitance. The hardware mode pins configure audio data format, master/slave clocking, and HPF behavior; review them before PCB layout because they cannot be changed in software. This page synthesizes distributor pricing, drop-in and equivalent options, and practical layout guidance beyond what is printed in the manufacturer datasheet.

RFQ پەیوەندی
ALC5660-CG - 106dB SNR Stereo Audio Codec w/ HP Amp | Realtek
ALC5660-CG

ALC5660-CG - 106dB SNR Stereo Audio Codec w/ HP Amp | Realtek

The Realtek ALC5660-CG is a high-performance, low-power stereo audio codec with an integrated Class-G headphone amplifier, packaged in a surface-mount QFN and specified for 106 dB SNR with a 24-bit I2S/PCM digital interface. It accepts stereo digital audio over I2S/PCM and drives line outputs, headphone loads, and microphone inputs through on-board ADCs, DACs, and a flexible analog mixing block. The device targets portable and embedded designs where board space, BOM cost, and audio fidelity must coexist with strict power budgets. An audio codec is a mixed-signal integrated circuit that bridges the digital audio domain (typically I2S, PCM, TDM, or S/PDIF streams) and the analog audio domain (headphones, line-level outputs, microphones, and line-level inputs). Inside the codec, multi-bit sigma-delta ADCs digitize analog microphone and line-in signals, while multi-bit sigma-delta DACs reconstruct analog waveforms from the incoming digital stream. The ALC5660 belongs to the broader hierarchy of audio interface ICs > interface ICs > signal chain ICs > mixed-signal semiconductor; codecs are distinguished from pure DACs or ADCs by their bidirectional stereo architecture and integrated mixer, microphone preamplifier, and (in this case) headphone driver. Key features of the ALC5660-CG include a 106 dB SNR DAC, 24-bit resolution across the digital audio interface, integrated headphone amplifier with ground-referenced Class-G topology, support for microphone bias and digital microphone inputs, and a flexible digital mixing engine. The Class-G amplifier dynamically scales the internal supply rail to match the instantaneous headphone output level, sharply reducing quiescent dissipation during quiet passages while still delivering ample headroom for peaks. Technically, the ALC5660 uses multi-bit sigma-delta modulator cores for both the record (ADC) and playback (DAC) paths, with on-chip digital decimation/interpolation filters. The headphone path uses a charge-pump-derived negative rail and a dynamically switched supply to maximize efficiency at low output levels. All gain, mixing, and routing is controlled through a two-wire (I2C-style) control interface. Typical applications include tablets, ultrabooks, docking stations, portable media players, USB-C headsets, and single-board computer audio hats. The QFN package and integrated HP amp minimize PCB area, while the high SNR suits music playback and VoIP. Design consideration: the Class-G topology relies on adequate bulk decoupling near the HP supply pins, and the digital I2S/PCM bus should be length-matched and routed away from the analog headphone outputs to preserve SNR. This page consolidates distributor pricing, drop-in alternative candidates, and engineering design notes not available in the standalone manufacturer datasheet, helping engineers evaluate sourcing options and PCB integration in one place.

RFQ پەیوەندی
BD3452KS - 8-Channel 7.1ch Sound Processor | ROHM
BD3452KS

BD3452KS - 8-Channel 7.1ch Sound Processor | ROHM

ROHM Semiconductor BD3452KS is a 7.1-channel sound processor with eight output channels, a nine-channel input selector, eight-channel volume control, and gain amplification integrated into a single chip. The device operates from 13 V to 14.6 V and is offered in a 100-SQFP package measuring 14 mm by 20 mm. A sound processor is an audio signal-processing IC that selects among multiple audio sources, applies channel gain and volume control, and distributes the resulting signals to multichannel output stages. Within the broader semiconductor hierarchy, the BD3452KS belongs to the audio processing IC and signal processor categories, where it bridges source selection, channel-level control, and home-theater audio system routing. The principal documented features include a nine-channel input selector, eight-channel volume control, eight-channel gain amplification, and support for 7.1-channel audio processing. These functions are intended for AV receivers, home-theater systems, and mini-component systems. The consolidated implementation reduces the number of separate routing and volume-control blocks required in a multichannel receiver. The BD3452KS uses a two-wire control interface according to the distributor product information. This interface is intended for integration with a system controller while leaving the device's signal-processing and channel-adjustment functions local to the audio subsystem. Its 13 V to 14.6 V operating range indicates that it is designed around a conventional internal receiver supply rather than a low-voltage portable system. Typical application roles include AV receiver channel routing, home-theater input selection, and mini-component multichannel amplification control. In these systems, the processor can select the appropriate source and apply per-channel gain and volume before signals reach external power amplifiers or downstream audio circuitry. The eight-output-channel architecture is particularly relevant to surround-sound configurations. For new designs, verify the complete pin configuration, control protocol, electrical limits, and signal-path behavior against the manufacturer datasheet before layout or firmware development. Because the available verified information identifies the package and core functions but does not provide a complete pin table or detailed timing data, those implementation details should not be inferred from generic sound-processor designs. This page consolidates verified distributor information, the manufacturer-hosted datasheet, function-level application guidance, selection criteria, and explicitly identified data gaps. It is designed to provide practical procurement and engineering context without presenting unverified electrical values, replacement parts, or lifecycle assumptions as established facts.

RFQ پەیوەندی
BD3464FV-E2 - 4-Channel I2C Audio Volume Controller | ROHM
BD3464FV-E2

BD3464FV-E2 - 4-Channel I2C Audio Volume Controller | ROHM

The ROHM BD3464FV-E2 is a general-purpose four-channel electronic volume controller with a built-in advanced switch, an operating supply range of 7 V to 9.5 V, and a 20-pin SSOP-B package. It uses an I2C control interface, supports 5 V control, and is intended for multichannel audio systems that require software-controlled attenuation. The device is classified by ROHM as not recommended for new designs, so its appropriate use is primarily in established designs requiring lifecycle support rather than new platform creation. An audio volume controller is an audio signal-processing IC that applies electronic attenuation between source and amplifier stages. Its broader hierarchy is audio volume controller, audio processor, analog audio IC, interface IC, and semiconductor. Unlike a passive potentiometer, the BD3464FV-E2 permits volume changes through an I2C command while preserving a controlled signal path and reducing dependence on mechanical adjustment. Key features include four independently controlled audio channels, an advanced-switch circuit intended to reduce volume-control switching noise, and low-current operation implemented with a Bi-CMOS process. The manufacturer data also identifies I2C control, 5 V control compatibility, a 7 V to 9.5 V supply range, and placement of I/O terminals together to simplify PCB layout and reduce board area. A distributor description reports RoHS3 compliance. Technically, the part combines digital command processing with an analog attenuation function. The advanced switch is intended to suppress noise associated with changing the attenuation state, which is important when volume adjustments occur during music or speech playback. Its Bi-CMOS implementation combines bipolar and CMOS characteristics with an emphasis on low current consumption. The complete electrical limits, control register map, attenuation steps, frequency response, and distortion specifications require confirmation from the manufacturer datasheet. Typical uses include powered speakers, mini hi-fi systems, automotive head units, home-theater receivers, and other multichannel audio products in which software control is preferable to a mechanical volume control. The I2C interface also allows a system controller to coordinate attenuation with playback status, mute functions, or source selection. Designers should verify the complete pin function map, recommended input and output coupling network, I2C address configuration, and external component values against the manufacturer datasheet before making a board revision. Because the part is not recommended for new designs, new products should generally use a currently recommended audio volume-control IC unless continuity with an existing platform is required. This page consolidates the verified manufacturer and distributor information, distinguishes documented capabilities from unavailable technical details, and provides application and design guidance without inventing missing electrical limits, pricing, pin assignments, or drop-in equivalents.

RFQ پەیوەندی