AK4353VF - 24-Bit 96kHz Stereo DAC | Asahi Kasei
MPN: AK4353VF ✗ کۆتایی ژیانAK4353VF گشتی
An audio DAC is a digital-to-analog converter, a specialized data-conversion IC that transforms digital audio samples into continuous analog voltage signals. Its role in the signal chain is to bridge digital playback systems and downstream analog audio stages. The AK4353VF belongs to the DAC category, within data-conversion ICs and broader semiconductor signal-processing devices. It is suited to compact audio equipment where a serial audio source must feed an analog amplifier, mixer, headphone circuit, or line-level input stage.
The principal device features are 24-bit resolution, operation from 16 kHz through 96 kHz, single-ended analog outputs, and integrated analog filtering. The 2.7 V minimum supply voltage permits use with 3.3 V systems, while the 5.5 V maximum supports 5 V analog and digital rails. Serial digital interfacing reduces the number of signal connections compared with a parallel DAC. These characteristics make the device appropriate for consumer audio, digital mixing, multimedia playback, and compact instrument applications.
Technically, the AK4353VF combines a CMOS DAC core, digital audio input interface, and analog output stage. Its integrated filtering handles out-of-band components that would otherwise require discrete low-pass reconstruction filters. The digital interface accommodates TTL and CMOS levels, allowing connection to digital audio logic operating across common supply domains. Because the outputs are single-ended, downstream circuitry must provide the required gain and impedance conversion; the AK4353VF does not include a balanced-output stage or an integrated headphone amplifier.
Typical applications include CD and DVD player analog output stages, digital mixing consoles, multimedia speaker interfaces, digital audio recording or monitoring equipment, and consumer audio adapters. The 96 kHz maximum sampling rate supports high-resolution digital audio streams, while 24-bit word length preserves fine amplitude detail. Its surface-mount 24-VSOP format supports automated assembly but requires careful handling of the relatively narrow lead pitch.
The primary design consideration is decoupling. Place the analog and digital supply capacitors close to their corresponding pins, route digital signals away from the analog outputs, and observe the datasheet grounding guidance. Keep analog and digital return currents separated until their planned connection point, and verify the output amplitude and load requirements of the following amplifier stage before finalizing board-level filtering.
This product guidance combines the device specifications, package details, lifecycle information, and engineering considerations needed for initial design evaluation. It also identifies the AK4353VF-E2 temperature-range variant for comparison and explains why a claimed replacement must be checked for package, pinout, interface, and lifecycle compatibility.
جێگرەوەکانی جێگۆڕکێ بۆ AK4353VF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەAK4353VF زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Stereo CMOS digital-to-analog converter |
| وردی | 24 bit |
| ڕێژەی نموونەگرتن | 16 kHz to 96 kHz |
| Digital Interface | Serial |
| Analog Output | Single-ended |
| Output Filtering | Integrated analog filter |
| External Reconstruction Filter | Not required |
| Analog and Digital Supply Voltage | 2.7 V to 5.5 V |
| Digital Input Logic Levels | TTL and CMOS |
| پلەی گەرمیی کارکردن | -40 °C to +85 °C |
| پاکێج | 24-VSOP |
| جۆری دامەزراندن | Surface mount |
| Product Status | Obsolete |
| Signal Conversion Method | DIT |
| Analog Output Count | 2 channels |
ڕێنمایی ڕێکخستنی پینی AK4353VF 24-vsop
ڕێکخستنی پین بۆ AK4353VF (پاکێجی 24-vsop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AK4353VF.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AK4353VF گونجاوە بۆ 6 بەکارھێنانs: Compact Digital Audio Player, Digital Mixing Console, Multimedia Speaker Interface, Digital Audio Monitoring, Consumer Audio Adapter, Digital Audio Test Equipment.
Compact Digital Audio Player
The AK4353VF fits a compact player requiring a serial digital source to feed an analog line-output stage. Its 24-bit conversion and 16 kHz to 96 kHz sampling range support high-resolution playback, while the integrated analog filter removes out-of-band noise without an external reconstruction filter. The device operates from 2.7 V to 5.5 V, allowing use with 3.3 V or 5 V system rails. Place the supply capacitors close to the device and route the single-ended outputs into the next amplifier or volume-control stage.
پێشنیارکراو
Digital Mixing Console
The AK4353VF can provide analog monitoring or line-level outputs for a digital mixing system. A serial source supplies the selected audio channel, and the DAC converts it at up to 96 kHz with 24-bit resolution. Its single-ended outputs simplify the immediate connection to input stages, although balanced conversion may still be required by the finished console. The 2.7 V minimum supply voltage supports compact subcircuits, and the integrated analog filter reduces the need for a separate output-reconstruction network.
پێشنیارکراو
Multimedia Speaker Interface
The AK4353VF is suitable for the digital-to-analog portion of a multimedia speaker or active-speaker interface. It converts 24-bit serial audio at rates from 16 kHz to 96 kHz and provides filtered single-ended outputs ready for an analog gain stage. Because the device does not directly drive a speaker, the amplifier must handle the required output power and impedance. Supply layout is critical: separate analog and digital paths as far as practical and place local bypass capacitance at the corresponding supply pins.
پێشنیارکراو
Digital Audio Monitoring
The AK4353VF can convert a digital monitoring feed into an analog signal for headphones, powered speakers, or a line monitor. The 96 kHz maximum sampling rate is useful for high-resolution monitoring workflows, and the 24-bit interface preserves source detail. The DAC produces single-ended outputs rather than a balanced monitor feed, so the downstream circuit must add amplification and any required channel balancing. Keep sensitive analog routing away from clock and serial-data traces to minimize channel crosstalk.
پێشنیارکراو
Consumer Audio Adapter
A small consumer adapter can use the AK4353VF to bridge a digital audio interface to an analog amplifier. The serial digital interface limits connection count, while the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V implementations. Integrated analog filtering removes out-of-band noise, making the output path straightforward when the target load is compatible. Designers should still protect the analog outputs from electrostatic discharge and provide stable, low-noise supply connections around the converter.
پێشنیارکراو
Digital Audio Test Equipment
The AK4353VF is appropriate for a compact digital-to-analog test source that must produce reproducible analog audio from a controlled serial stream. Its 24-bit resolution and sampling rates up to 96 kHz permit test vectors at common high-resolution rates. The single-ended output and integrated analog filter simplify a basic fixture, but calibration, output termination, and ground-loop control remain part of the measurement system. Use low-noise test supplies and a defined load to keep measurement uncertainty separate from converter performance.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AK4353VF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 24-VSOP |
| Brand | Asahi Kasei Microdevices |
| Device Type | Stereo audio DAC |
| Resolution | 24 bit |
| Sampling Rate | 16 kHz to 96 kHz |
| Digital Interface | Serial |
| Supply Voltage | 2.7 V to 5.5 V |
| Analog Output | Single-ended |
| Operating Temperature | -40 °C to +85 °C |
| Lifecycle Status | Obsolete |
جیاکەرەوە سەرەکییەکان
- Integrated analog output filtering (بەراورد بەDiscrete filtered DAC output stages)
- Broad digital sampling-rate support (بەراورد بەLower-rate audio DAC configurations)
- Low-voltage analog and digital operation (بەراورد بەFixed 5 V-only DAC designs)
تێبینییەکانی دیزاین
Separate analog and digital supply routing as far as practical, then join the return network at a controlled ground point. Place bypass capacitors close to the corresponding supply pins and keep the analog output traces away from serial data and clock lines. The AK4353 manufacturer datasheet should be used to assign every pin because the exact 24-VSOP pad geometry must match the board footprint.
Treat the digital audio clock and data nets as timing-sensitive signals. Use short routes, minimize stub branches, and provide a continuous reference plane beneath the digital interface. Avoid running serial data directly beneath analog output traces. When the source and DAC use different supply domains, confirm input thresholds and signal levels against the manufacturer's interface specifications.
Do not assume that a family suffix is automatically a drop-in replacement. Compare the exact package drawing, pin assignment, electrical limits, sampling-rate support, and lifecycle status before using any AK4353 variant in an existing design. Also avoid adding an external reconstruction filter on the assumption that one is required; the integrated analog output filter is intended to remove out-of-band noise.
زانیاری پابەندبوون
Compliance attributes were not identified in the AK4353 manufacturer datasheet excerpt or product listings.