AKM (Asahi Kasei Microdevices)

AK4353VF - 24-Bit 96kHz Stereo DAC | Asahi Kasei

부품 번호: AK4353VF ✗ 단종
2.7 V to 5.5 V Vdss 24-VSOP Package
MOQ: 1 |

AK4353VF 개요

The Asahi Kasei Microdevices AK4353VF is a 24-bit stereo CMOS digital-to-analog converter with a sampling rate of 16 kHz to 96 kHz, a 2.7 V to 5.5 V analog and digital supply range, and a 24-VSOP surface-mount package. It accepts serial digital audio data and produces single-ended analog outputs. An integrated analog filter removes out-of-band noise, so no external reconstruction filter is required. The digital interface supports TTL and CMOS signal levels.

An audio DAC is a digital-to-analog converter, a specialized data-conversion IC that transforms digital audio samples into continuous analog voltage signals. Its role in the signal chain is to bridge digital playback systems and downstream analog audio stages. The AK4353VF belongs to the DAC category, within data-conversion ICs and broader semiconductor signal-processing devices. It is suited to compact audio equipment where a serial audio source must feed an analog amplifier, mixer, headphone circuit, or line-level input stage.

The principal device features are 24-bit resolution, operation from 16 kHz through 96 kHz, single-ended analog outputs, and integrated analog filtering. The 2.7 V minimum supply voltage permits use with 3.3 V systems, while the 5.5 V maximum supports 5 V analog and digital rails. Serial digital interfacing reduces the number of signal connections compared with a parallel DAC. These characteristics make the device appropriate for consumer audio, digital mixing, multimedia playback, and compact instrument applications.

Technically, the AK4353VF combines a CMOS DAC core, digital audio input interface, and analog output stage. Its integrated filtering handles out-of-band components that would otherwise require discrete low-pass reconstruction filters. The digital interface accommodates TTL and CMOS levels, allowing connection to digital audio logic operating across common supply domains. Because the outputs are single-ended, downstream circuitry must provide the required gain and impedance conversion; the AK4353VF does not include a balanced-output stage or an integrated headphone amplifier.

Typical applications include CD and DVD player analog output stages, digital mixing consoles, multimedia speaker interfaces, digital audio recording or monitoring equipment, and consumer audio adapters. The 96 kHz maximum sampling rate supports high-resolution digital audio streams, while 24-bit word length preserves fine amplitude detail. Its surface-mount 24-VSOP format supports automated assembly but requires careful handling of the relatively narrow lead pitch.

The primary design consideration is decoupling. Place the analog and digital supply capacitors close to their corresponding pins, route digital signals away from the analog outputs, and observe the datasheet grounding guidance. Keep analog and digital return currents separated until their planned connection point, and verify the output amplitude and load requirements of the following amplifier stage before finalizing board-level filtering.

This product guidance combines the device specifications, package details, lifecycle information, and engineering considerations needed for initial design evaluation. It also identifies the AK4353VF-E2 temperature-range variant for comparison and explains why a claimed replacement must be checked for package, pinout, interface, and lifecycle compatibility.

드롭인 대체품: AK4353VF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

AK4353VF 최대 정격 & 전기적 특성

Device Type Stereo CMOS digital-to-analog converter
분해능 24 bit
샘플링 속도 16 kHz to 96 kHz
Digital Interface Serial
Analog Output Single-ended
Output Filtering Integrated analog filter
External Reconstruction Filter Not required
Analog and Digital Supply Voltage 2.7 V to 5.5 V
Digital Input Logic Levels TTL and CMOS
동작 온도 -40 °C to +85 °C
패키지 24-VSOP
실장 유형 Surface mount
Product Status Obsolete
Signal Conversion Method DIT
Analog Output Count 2 channels

AK4353VF 24-vsop 핀 구성 가이드

AK4353VF(24-vsop 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AK4353VF의 24-vsop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AK4353VF.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AK4353VF 적합 용도: 6 애플리케이션s: Compact Digital Audio Player, Digital Mixing Console, Multimedia Speaker Interface, Digital Audio Monitoring, Consumer Audio Adapter, Digital Audio Test Equipment.

🎧

Compact Digital Audio Player

The AK4353VF fits a compact player requiring a serial digital source to feed an analog line-output stage. Its 24-bit conversion and 16 kHz to 96 kHz sampling range support high-resolution playback, while the integrated analog filter removes out-of-band noise without an external reconstruction filter. The device operates from 2.7 V to 5.5 V, allowing use with 3.3 V or 5 V system rails. Place the supply capacitors close to the device and route the single-ended outputs into the next amplifier or volume-control stage.

🎚️

Digital Mixing Console

The AK4353VF can provide analog monitoring or line-level outputs for a digital mixing system. A serial source supplies the selected audio channel, and the DAC converts it at up to 96 kHz with 24-bit resolution. Its single-ended outputs simplify the immediate connection to input stages, although balanced conversion may still be required by the finished console. The 2.7 V minimum supply voltage supports compact subcircuits, and the integrated analog filter reduces the need for a separate output-reconstruction network.

🔊

Multimedia Speaker Interface

The AK4353VF is suitable for the digital-to-analog portion of a multimedia speaker or active-speaker interface. It converts 24-bit serial audio at rates from 16 kHz to 96 kHz and provides filtered single-ended outputs ready for an analog gain stage. Because the device does not directly drive a speaker, the amplifier must handle the required output power and impedance. Supply layout is critical: separate analog and digital paths as far as practical and place local bypass capacitance at the corresponding supply pins.

🎛️

Digital Audio Monitoring

The AK4353VF can convert a digital monitoring feed into an analog signal for headphones, powered speakers, or a line monitor. The 96 kHz maximum sampling rate is useful for high-resolution monitoring workflows, and the 24-bit interface preserves source detail. The DAC produces single-ended outputs rather than a balanced monitor feed, so the downstream circuit must add amplification and any required channel balancing. Keep sensitive analog routing away from clock and serial-data traces to minimize channel crosstalk.

📱

Consumer Audio Adapter

A small consumer adapter can use the AK4353VF to bridge a digital audio interface to an analog amplifier. The serial digital interface limits connection count, while the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V implementations. Integrated analog filtering removes out-of-band noise, making the output path straightforward when the target load is compatible. Designers should still protect the analog outputs from electrostatic discharge and provide stable, low-noise supply connections around the converter.

🔧

Digital Audio Test Equipment

The AK4353VF is appropriate for a compact digital-to-analog test source that must produce reproducible analog audio from a controlled serial stream. Its 24-bit resolution and sampling rates up to 96 kHz permit test vectors at common high-resolution rates. The single-ended output and integrated analog filter simplify a basic fixture, but calibration, output termination, and ground-loop control remain part of the measurement system. Use low-noise test supplies and a defined load to keep measurement uncertainty separate from converter performance.

What is the AK4353VF?
The AK4353VF is a 24-bit stereo CMOS DAC for digital audio systems. It accepts serial audio data, supports sampling rates from 16 kHz to 96 kHz, and produces single-ended analog outputs through an integrated analog filter. According to the AK4353 manufacturer datasheet, the device operates from a 2.7 V to 5.5 V supply and accepts TTL or CMOS digital input levels.
What are the key specifications of AK4353VF?
The AK4353VF provides 24-bit resolution, a 16 kHz to 96 kHz sampling-rate range, serial digital input, and single-ended stereo analog outputs. Its analog and digital supply range is 2.7 V to 5.5 V, while its listed operating-temperature range is -40 °C to +85 °C. The AK4353 manufacturer datasheet also states that an integrated analog filter removes out-of-band noise.
Does AK4353VF require an external reconstruction filter?
No. The AK4353VF includes analog filtering at its DAC outputs to remove out-of-band noise. The AK4353 manufacturer datasheet specifically states that no external filters are required. The downstream amplifier or line-output network still needs to satisfy the output-loading and signal-level requirements of the completed audio channel.
What is the operating voltage of AK4353VF?
The AK4353VF operates from 2.7 V to 5.5 V for its analog and digital supply. According to the AK4353 manufacturer datasheet, this range supports 3.3 V and 5 V systems. The actual rail combination and permissible analog, digital, and interface voltages must be checked against the electrical-characteristics table before layout release.
Where can I download the AK4353VF datasheet PDF?
The AK4353VF datasheet PDF is available through the AK4353 document link on this page and from the listed product-document sources. It describes the stereo CMOS DAC architecture, serial digital interface, 2.7 V to 5.5 V supply range, single-ended outputs, integrated analog filtering, electrical characteristics, and application information. Use the manufacturer document as the controlling reference for final design decisions.
Where is the AK4353VF pinout?
The AK4353VF pin assignment is documented in the pin-description section of the AK4353 manufacturer datasheet. Its exact physical package is identified as 24-VSOP. The package drawing should be matched to the board footprint before routing power, ground, digital audio, clock, and analog output nets. A schematic symbol alone is not sufficient for confirming a new PCB footprint.
Is the AK4353VF still active?
The AK4353VF is listed as obsolete. The AK4353 manufacturer datasheet cautions that product status and specifications may change and recommends confirming current availability with the manufacturer or an authorized channel. For a new design, treat lifecycle confirmation as a prerequisite rather than assuming that an existing board layout can be populated without review.
Can AK4353VF output 96 kHz audio?
Yes. The AK4353VF supports sampling rates from 16 kHz through 96 kHz with 24-bit conversion. The serial source must provide compatible audio data, clocking, and interface signaling. At 96 kHz, confirm that the upstream transmitter, cable or board-level connection, and receiving device support the corresponding data rate.
What digital audio interface does AK4353VF use?
The AK4353VF uses a serial digital audio interface rather than a parallel data bus. The AK4353 manufacturer datasheet states that its digital interface supports TTL and CMOS levels. This reduces package pin count and board routing demand, but the source device must supply compatible framing, bit order, master or slave clocking, and signal-level arrangement.
Where can I buy AK4353VF online?
Use the Request a Quote form on this page to request current AK4353VF availability, lead time, and minimum order quantity. Because the device is listed as obsolete, availability may depend on remaining inventory and lot traceability. Request the manufacturer, package suffix, date code, and inspection condition along with the quotation.
What is the price of AK4353VF?
Use the Request a Quote form on this page for the current AK4353VF quotation. Obsolete inventory can vary materially by lot, date code, traceability, and condition, so a single historical price would not represent current availability. Submit the required quantity and packaging preferences with the request for an itemized response.
What is the lead time for AK4353VF?
The current lead time should be requested through the Request a Quote form on this page. Since the AK4353VF is listed as obsolete, there is no normal production schedule to assume; any delivery depends on available inventory and lot traceability. Include the required quantity, target date, and acceptable date-code condition in the request.
Is AK4353VF in stock?
Current AK4353VF stock status should be confirmed through the Request a Quote form on this page. The device is listed as obsolete, so quantities may be limited and may vary by manufacturer lot, date code, and package suffix. A quotation response should state availability, lot information, and expected delivery rather than relying on an unverified stock count.
What is the difference between AK4353VF and AK4353VF-E2?
The AK4353VF-E2 is identified as an extended-temperature AK4353 variant, with a listed operating range of -40 °C to +105 °C, while the standard AK4353VF is listed from -40 °C to +85 °C. The suffix and package details should still be checked against the AK4353 datasheet before substitution; an extended temperature rating alone does not establish a drop-in replacement.
What is the best drop-in replacement for AK4353VF?
No verified same-footprint, pin-to-pin drop-in replacement for the AK4353VF is established on this product page. The AK4353VF-E2 is an identifiable family variant, but its package marking and electrical details require confirmation before it is treated as a replacement. Request availability for the exact suffix through the Request a Quote form and validate its pinout, interface timing, supplies, and lifecycle status.
Can AK4353VF be used with a 3.3 V digital audio source?
Yes, the AK4353VF is specified for a 2.7 V to 5.5 V supply range and supports TTL and CMOS digital input levels. A 3.3 V digital audio source is therefore compatible in principle, subject to the complete power architecture and interface timing. Check the digital input thresholds and supply relationships in the manufacturer datasheet for the exact operating configuration.

엔지니어링 참조 데이터: AK4353VF — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AK4353VF when the design needs a 24-bit stereo DAC with serial digital input, sampling rates up to 96 kHz, and single-ended analog outputs. It is particularly useful when the board uses 3.3 V or 5 V rails and the output can feed a conventional analog gain stage without a separate reconstruction filter. The device should not be selected for a new design without confirming that its obsolete status and sourcing requirements are acceptable. The AK4353VF-E2 is relevant when a higher listed operating-temperature range is required, but it must be checked for exact package and pin compatibility. No verified same-footprint cross-brand replacement is identified, so an alternative should be accepted only after its pinout, interface timing, output architecture, supply range, and lifecycle status have been independently checked.

대체품과의 비교

파라미터 이 제품
Package 24-VSOP
Brand Asahi Kasei Microdevices
Device Type Stereo audio DAC
Resolution 24 bit
Sampling Rate 16 kHz to 96 kHz
Digital Interface Serial
Supply Voltage 2.7 V to 5.5 V
Analog Output Single-ended
Operating Temperature -40 °C to +85 °C
Lifecycle Status Obsolete

주요 차별점

  • Integrated analog output filtering (vs Discrete filtered DAC output stages)
  • Broad digital sampling-rate support (vs Lower-rate audio DAC configurations)
  • Low-voltage analog and digital operation (vs Fixed 5 V-only DAC designs)

설계 노트

Separate analog and digital supply routing as far as practical, then join the return network at a controlled ground point. Place bypass capacitors close to the corresponding supply pins and keep the analog output traces away from serial data and clock lines. The AK4353 manufacturer datasheet should be used to assign every pin because the exact 24-VSOP pad geometry must match the board footprint.

Treat the digital audio clock and data nets as timing-sensitive signals. Use short routes, minimize stub branches, and provide a continuous reference plane beneath the digital interface. Avoid running serial data directly beneath analog output traces. When the source and DAC use different supply domains, confirm input thresholds and signal levels against the manufacturer's interface specifications.

Do not assume that a family suffix is automatically a drop-in replacement. Compare the exact package drawing, pin assignment, electrical limits, sampling-rate support, and lifecycle status before using any AK4353 variant in an existing design. Also avoid adding an external reconstruction filter on the assumption that one is required; the integrated analog output filter is intended to remove out-of-band noise.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance attributes were not identified in the AK4353 manufacturer datasheet excerpt or product listings.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AK4353VF datasheet AK4353VF pinout AK4353VF datasheet pdf AK4353VF equivalent AK4353VF replacement AK4353VF cross reference AK4353VF vs AK4353VF-E2 AK4353VF 24-VSOP footprint AK4353VF price AK4353VF stock Asahi Kasei AK4353VF AK4353VF 24-bit 96kHz DAC AK4353VF audio converter AK4353VF schematic

관련 부품 & 용어

Asahi Kasei Microdevices AKM Semiconductor AK4353VF AK4353VF-E2 Digital-to-analog converter DAC Stereo DAC CMOS DAC Audio DAC Data-conversion IC Semiconductor 24-bit resolution 96 kHz sampling rate Serial audio interface Single-ended analog output Integrated analog filter TTL CMOS 2.7 V to 5.5 V supply 24-VSOP Surface-mount package Digital audio Reconstruction filter Obsolete lifecycle status
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기