Microchip Technology

AT90CAN32-15AT1 - 15MHz 32KB AVR CAN MCU | Microchip

MPN: AT90CAN32-15AT1 ✓ چالاک
64-TQFP Package 15 MHz Speed 32 KB Memory
MOQ: 1 |

AT90CAN32-15AT1 گشتی

The Microchip Technology AT90CAN32-15AT1 is an 8-bit AVR RISC microcontroller with a 15 MHz clock, 32 KB of ISP flash memory, an integrated CAN controller, and a 64-pin TQFP package. It is designed for industrial embedded systems that require deterministic communication, low-power operation, and a broad set of peripheral interfaces.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one device. The AT90CAN32 belongs to the AVR 8-bit microcontroller family, a branch of embedded processors used in industrial control, automotive electronics, instrumentation, and CAN-connected equipment. Its enhanced RISC architecture supports efficient instruction execution while retaining a relatively simple programming model.

The AT90CAN32-15AT1 operates at 15 MHz and includes 32 KB of ISP flash, 1 KB of EEPROM, and 2 KB of SRAM. The manufacturer describes the AT90CAN32 family as providing 53 general-purpose I/O lines, 32 working registers, and a CAN controller. Its TQFP-64 package exposes the complete mixed-signal and communication interface set while supporting conventional surface-mount PCB assembly.

The integrated CAN controller is the principal technical distinction from a general-purpose 8-bit AVR. It allows the controller to participate in standardized vehicle or industrial networks without requiring a separate CAN transceiver. Designers still need an external transceiver for physical-layer signaling, but the MCU handles frame handling, filtering, interrupts, and higher-level CAN operation. ISP flash supports in-system programming, while EEPROM preserves calibration, configuration, or serial-number data across power cycles.

Typical uses include CAN-based industrial controllers, vehicle body and dashboard modules, diagnostic equipment, sensor gateways, motor-control subsystems, and low-power embedded instruments. The 15 MHz operating point provides useful computation margin for protocol handling and control tasks, while the 53 I/O lines allow multiple sensors, actuators, status indicators, and communications peripherals to share one controller.

PCB design should preserve the decoupling requirements, clock stability, programming access, and CAN signal routing described in the manufacturer datasheet. Place input and output capacitors close to the device, route the clock network away from noisy switching nodes, and provide a clean transceiver interface for the CAN TX and RX signals. The TQFP footprint also needs adequate solder-mask and thermal-via planning for reliable manufacturing.

This product page combines the manufacturer family information with package, memory, speed, and replacement context. It also organizes practical guidance for CAN termination, firmware migration, decoupling, and PCB layout so engineers can evaluate the AT90CAN32-15AT1 before integrating it into a new embedded design.

جێگرەوەکانی جێگۆڕکێ بۆ AT90CAN32-15AT1 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AT90CAN32-15AT1 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, General-Purpose I/O Lines, General-Purpose Working Registers, CAN Controller.

Microchip Technology
Package: 64-pin TQFP, 14 mm x 14 mm
Product Type: 8-bit automotive AVR RISC microcontroller
CAN Controller: CAN 2.0A and CAN 2.0B
بەراوردکردن لەگەڵ AT90CAN32-15AT1 →
Microchip Technology
Package: 64-pin TQFP (1.0 mm height)
بەراوردکردن لەگەڵ AT90CAN32-15AT1 →
Microchip Technology
Package: 64-TQFP (14 mm x 14 mm)
Product Type: 8-bit AVR RISC microcontroller with CAN controller
CAN Controller: CAN V2.0A and CAN V2.0B
بەراوردکردن لەگەڵ AT90CAN32-15AT1 →
Microchip Technology
Package: 64-QFN (9 x 9 mm)
Product Type: 8-bit RISC Flash Microcontroller with CAN Controller
General-Purpose I/O Lines: 53
بەراوردکردن لەگەڵ AT90CAN32-15AT1 →

AT90CAN32-15AZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 TQFP-64
8-bit AVR enhanced RISC · 32 KB Flash · 1 KB · 2 KB · 16 MHz (15 MHz speed grade) · 2.7 V to 5.5 V · 53 lines · 32 x 8-bit

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AT90CAN32-15AU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 TQFP-64
Same 15 MHz clock and 32 KB memory configuration; the AU suffix changes the qualification or temperature class.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AT90CAN32-16MU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 TQFP-64
8-bit RISC Flash Microcontroller with CAN Controller · AVR Enhanced RISC · 8 bit · 16 MHz · 32 KB (32K x 8) · 1 KB · 2 KB · 53

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AT90CAN32-16AU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 TQFP-64
8-bit AVR RISC microcontroller with CAN controller · 16 MHz · 32 KB (32K x 8) · 2 KB · 1 KB · 53 lines · 32 registers · 2.7 V to 5.5 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AT90CAN32-15AT

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 TQFP-64
8-bit automotive AVR RISC microcontroller · 15 MHz · 32 KB · 1 KB · 2 KB · 53 lines · 32 registers · 133 powerful instructions

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AT90CAN32-15AT1 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Microcontroller Type 8-bit RISC MCU
CPU Family AVR
زۆرترین فرێکوێنسیی کاتژمێر 15 MHz
Flash Memory 32 KB
EEPROM 1 KB
SRAM 2 KB
General-Purpose I/O Lines 53 lines
General-Purpose Working Registers 32 registers
Controller Interface CAN
پاکێج 64-TQFP
Package Dimensions 14 mm x 14 mm
Temperature Grade Industrial
Programming Interface In-system programming (ISP)
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی AT90CAN32-15AT1 14 mm x 14 mm

ڕێکخستنی پین بۆ AT90CAN32-15AT1 (پاکێجی 14 mm x 14 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 14 mm x 14 mm بۆ AT90CAN32-15AT1

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AT90CAN32-15AT1.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AT90CAN32-15AT1 گونجاوە بۆ 6 بەکارھێنانs: Industrial CAN Sensor Gateway, Automotive Body Control Module, CAN Diagnostic Instrument, Industrial Motor Control Interface, Networked Environmental Monitor, Embedded CAN Test Fixture.

🏭

Industrial CAN Sensor Gateway

The AT90CAN32-15AT1 fits an industrial sensor gateway because its integrated CAN controller, 53 general-purpose I/O lines, and 15 MHz AVR core provide enough interface capacity for multiple sensors and remote node management. It can collect digital and analog-channel information, filter CAN traffic, update local status indicators, and maintain protocol state while an external transceiver connects the MCU to the physical bus. The 2 KB SRAM supports temporary frame and application data, while 1 KB of EEPROM preserves configuration or calibration values. The key design consideration is separating CAN and switching-power paths from precision sensing and clock circuitry.

🚗

Automotive Body Control Module

The AT90CAN32-15AT1 is suitable for distributed vehicle body-control tasks that combine CAN communication with switch, lamp, sensor, and actuator supervision. Its CAN controller handles network frames and interrupts, allowing the 15 MHz AVR core to execute control logic without a separate communications processor. The 53 I/O lines offer substantial digital connectivity, and EEPROM can store configuration or diagnostic information across power cycles. Because the AT1 ordering code denotes an industrial-grade device, engineers must confirm environmental and automotive qualification requirements before production release and must use an external CAN transceiver with appropriate bus protection.

🖥️

CAN Diagnostic Instrument

The AT90CAN32-15AT1 can form the core of a compact CAN diagnostic instrument because it combines an 8-bit controller, integrated CAN handling, serial programming support, and enough I/O for buttons, displays, and status signaling. Firmware can decode or filter incoming frames, execute service requests, and present results through UART or another serial peripheral. Its 15 MHz clock provides useful timing margin for basic protocol analysis and logging. A practical design should add a galvanic or protected transceiver interface, careful ground planning, and a watch-dog strategy so a bus or communications fault cannot leave the instrument in an unsafe state.

🔧

Industrial Motor Control Interface

The AT90CAN32-15AT1 is appropriate for a CAN-connected motor-control interface where the MCU coordinates commands, reports machine state, and handles interlocks outside the power-conversion stage. Its timers and 53 I/O lines can support limit switches, encoders, contactor feedback, and status outputs, while the integrated CAN controller links the module to a wider automation system. The 15 MHz AVR core can execute deterministic supervisory logic, but motor switching devices should remain on dedicated power circuitry. Keep high-current transients and motor-node return currents away from the MCU, analog references, oscillator network, and CAN transceiver ground path.

🧩

Networked Environmental Monitor

The AT90CAN32-15AT1 works well in a networked environmental monitor that periodically samples sensors, applies filtering or thresholds, and publishes measurements over CAN. Its 53 I/O lines can accommodate digital sensors, alarm outputs, and local indicators, while EEPROM can retain calibration constants or installation identifiers. The integrated CAN controller reduces host-side protocol overhead compared with a general-purpose MCU without CAN support. For low-noise measurement accuracy, use dedicated analog and reference layout practices, provide stable filtering near sensor inputs, and isolate the MCU and CAN transceiver from pumps, heaters, relay contacts, or other switching loads that can corrupt measurements.

🔧

Embedded CAN Test Fixture

The AT90CAN32-15AT1 can be used in a compact production or service test fixture for exercising CAN nodes, simulating bus traffic, and coordinating pass/fail results. The 32 KB flash region provides room for application firmware and in-system programming workflows, while the 2 KB SRAM can hold temporary frames and test state. Its 53 I/O lines support stimulus outputs, measured-input capture, fixture interlocks, and operator interfaces. For repeatable testing, isolate the fixture from ground potential differences, include controlled termination only where required by the bus topology, and validate watchdog recovery when communication or external stimulus conditions fail.

What are the key specifications of AT90CAN32-15AT1 that engineers should know?
The AT90CAN32-15AT1 is a 15 MHz, 8-bit AVR RISC microcontroller with 32 KB of ISP flash, 1 KB of EEPROM, 2 KB of SRAM, 53 general-purpose I/O lines, and an integrated CAN controller in a 64-TQFP package. According to the Microchip AT90CAN32 manufacturer page, the family uses the low-power AVR architecture and includes 32 working registers. These resources make the device suitable for protocol-heavy embedded control rather than workloads requiring a 32-bit processor.
What is the AT90CAN32-15AT1 and what does it do?
The AT90CAN32-15AT1 is an 8-bit AVR microcontroller with a 15 MHz operating frequency and an integrated CAN controller. It provides 32 KB of ISP flash, 1 KB of EEPROM, 2 KB of SRAM, and 53 general-purpose I/O lines in a 64-TQFP package. According to the Microchip AT90CAN32 product page, the CAN controller supports networked automotive and industrial designs, while the AVR core handles application logic and peripheral control.
Where can I download the AT90CAN32 datasheet PDF?
The official AT90CAN32 datasheet and product documentation are available through the Microchip AT90CAN32 manufacturer page at https://www.microchip.com/en-us/product/AT90CAN32. The AT90CAN32-15AT1 ordering code identifies the 15 MHz, 32 KB-flash, industrial-grade member of the family in a 64-TQFP package. Use the manufacturer document-selection links to select the exact device variant and its complete pin, electrical, and programming information.
Where can I find the AT90CAN32-15AT1 pinout?
The AT90CAN32-15AT1 pinout is published in the pin-description tables of the AT90CAN32 manufacturer datasheet. The device is packaged in a 64-pin TQFP, and its pins include power, ground, reset, programming, clock, I/O, analog, and CAN-related functions. When assigning PCB nets, use the exact AT90CAN32-15AT1 pin table rather than a generic 64-pin drawing so that package-specific multiplexing and exposed functions are assigned correctly.
What memory and peripherals does the AT90CAN32-15AT1 provide?
The AT90CAN32-15AT1 provides 32 KB of ISP flash, 1 KB of EEPROM, and 2 KB of SRAM, together with 53 general-purpose I/O lines and 32 working registers. According to the Microchip AT90CAN32 product page, the family also includes a CAN controller. This combination supports CAN frame processing, control logic, persistent configuration storage, and simultaneous peripheral connectivity within a compact 64-TQFP device.
Can AT90CAN32-15AT1 be used in automotive CAN systems?
The AT90CAN32-15AT1 can be used in CAN-connected automotive systems when the system requirements match its industrial temperature grade, electrical limits, and qualification status. Its integrated CAN controller reduces the host-side processing burden, but an external CAN transceiver is still required to connect to the physical bus. Confirm automotive qualification and temperature requirements in the exact manufacturer documentation before using it in a safety- or vehicle-production design.
How does AT90CAN32-15AT1 compare with AT90CAN32-15AT?
The AT90CAN32-15AT1 and AT90CAN32-15AT are closely related 64-TQFP members of the same AT90CAN32 family, and distributor records show the AT90CAN32-15AT listing as a 15 MHz, 32 KB-flash device. The visible ordering information does not establish every ordering-code difference. Before substitution, compare temperature grade, orderable suffix, flash density, and the exact manufacturer pin table; a suffix change alone should not be assumed to preserve qualification.
Is AT90CAN32-15AT1 the same as AT90CAN32-16MU?
The AT90CAN32-15AT1 and AT90CAN32-16MU are not exact equivalents: the former is identified at 15 MHz, while the latter carries a 16 MHz designator. The family also uses ordering suffixes to encode temperature grade and package information. They may be considered during an upgrade only after confirming that the alternative uses the same 64-TQFP land pattern and that the faster clock, memory density, and qualification remain acceptable.
What can replace the AT90CAN32-15AT1?
The closest drop-in candidates are other AT90CAN32 members using the same 64-TQFP footprint, such as AT90CAN32-15AZ and the 16 MHz AT90CAN32-16MU or AT90CAN32-16AU variants. They are not identical: clock speed, temperature grade, or qualification can differ. Confirm the candidate's memory configuration, pin functions, clock limits, and electrical characteristics against the manufacturer datasheet before approving it as a replacement.
When should I choose AT90CAN32-15AT1 over AT90CAN32-16MU?
Choose the AT90CAN32-15AT1 when its 15 MHz clock, industrial-grade ordering designation, 32 KB flash configuration, and 64-TQFP footprint match the validated design. Choose AT90CAN32-16MU only when the higher 16 MHz clock and that part's qualification and operating limits provide a useful benefit. The higher clock can improve protocol-processing margin, but it may also require revalidation of timing, power, and firmware behavior.
Is AT90CAN32-15AT1 suitable for an industrial sensor gateway?
The AT90CAN32-15AT1 is suitable for many industrial sensor gateways because it combines a CAN controller, 53 I/O lines, 2 KB of SRAM, and 1 KB of EEPROM in a 64-TQFP package. Its 15 MHz AVR core can handle lightweight node management and interface tasks. The design must still include a suitable CAN transceiver, protection network, power regulation, watchdog strategy, and environmental validation for the installation location.
What is the best Microchip Technology equivalent for AT90CAN32-15AT1?
The best Microchip equivalent is an AT90CAN32 family member that retains the 64-TQFP land pattern, 32 KB flash configuration, 15 MHz operating point, and required temperature grade. AT90CAN32-15AZ is a close same-family candidate, while 16 MHz AT90CAN32 variants may support a performance upgrade. No single alternative is universally interchangeable because temperature grade and ordering suffix can change qualification and environmental requirements.
Where to buy AT90CAN32-15AT1 online?
Use the Request a Quote form on this page to request AT90CAN32-15AT1 availability, current lead time, and order handling. The manufacturer product page identifies the AT90CAN32 family, while the verified listings show AT90CAN32-15AT1 in a 64-TQFP industrial package. The quote form is the appropriate route for obtaining an exact-fit commitment rather than relying on an incomplete generic listing.
What is the price of AT90CAN32-15AT1?
The current unit price for AT90CAN32-15AT1 should be obtained through the Request a Quote form on this page. Pricing can vary with quantity, date code, packaging configuration, and supply status, so a static price can become inaccurate quickly. The form can also provide a current order quotation for the exact AT90CAN32-15AT1 ordering code rather than a related package variant.
What is the lead time for AT90CAN32-15AT1?
The current lead time for AT90CAN32-15AT1 must be confirmed through the Request a Quote form on this page. The verified AT90CAN32-15AT1 listing does not provide a fixed manufacturer lead time, and a historical estimated delivery window should not be treated as a present commitment. Request a dated quotation that states quantity, packaging, and expected shipment timing.
Is AT90CAN32-15AT1 in stock?
Current AT90CAN32-15AT1 inventory should be confirmed through the Request a Quote form on this page. A listing's visible stock statement or an aggregator's inventory count may not reflect transaction-ready supply at the time of purchase. Request confirmation of the quantity available, factory date code, shipping method, and any manufacturer or distribution allocation before releasing the order.
What PCB design constraints matter for AT90CAN32-15AT1?
The AT90CAN32-15AT1 PCB should follow the manufacturer layout guidance for power, decoupling, clock routing, programming access, and analog or communications signals. Keep the supply bypass capacitors close to their associated pins, keep the clock path compact and isolated from switching nodes, and maintain a clean return path. The CAN controller also needs a proper external transceiver and correctly terminated bus wiring for reliable network operation.
What is the role of AT90CAN32-15AT1 in a CAN network?
The AT90CAN32-15AT1 acts as the host-side controller in a CAN network, processing frames and coordinating connected I/O while application firmware handles the device-specific task. The integrated controller manages CAN protocol functions, but it does not directly drive the differential CAN bus; an external transceiver provides that interface. The MCU is therefore suitable for distributed automotive, industrial, diagnostic, and control nodes.
How do I migrate firmware from AT90CAN32-15AT1 to a 16 MHz replacement?
Firmware migration to a 16 MHz AT90CAN32 candidate requires a timing review rather than a simple recompilation. Check baud-rate timing, timer periods, PWM frequency, sampling behavior, timeout values, communication deadlines, and any delay loops calibrated to 15 MHz. The replacement also must match the 64-TQFP land pattern and required temperature grade. Use the manufacturer datasheet for the clock and peripheral limits of the selected suffix.

داتای سەرچاوەی ئەندازیاری بۆ AT90CAN32-15AT1 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose AT90CAN32-15AT1 for an existing or new 64-TQFP design that specifically targets a 15 MHz AT90CAN32 device with 32 KB flash, 1 KB EEPROM, 2 KB SRAM, 53 I/O lines, and an industrial-grade ordering designation. Select AT90CAN32-15AZ or AT90CAN32-15AU only when their exact temperature and qualification characteristics better match the end application. Consider AT90CAN32-16MU or AT90CAN32-16AU when the additional 6.7% clock rate provides useful processing margin and the complete firmware timing can be revalidated. AT90CAN32-15AT may be electrically close, but its ordering and qualification differences must be checked. For every candidate, verify the manufacturer pin table, electrical limits, memory configuration, lifecycle status, and automotive requirements before approving a drop-in substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە AT90CAN32-15AZ AT90CAN32-15AU AT90CAN32-16MU AT90CAN32-16AU AT90CAN32-15AT
Package 64-TQFP 64-TQFP 64-TQFP 64-TQFP 64-TQFP 64-TQFP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 15 MHz 15 MHz 15 MHz 16 MHz 16 MHz 15 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB 32 KB 32 KB
EEPROM 1 KB 1 KB 1 KB 1 KB 1 KB 1 KB
SRAM 2 KB 2 KB 2 KB 2 KB 2 KB 2 KB
General-Purpose I/O Lines 53 lines 53 lines 53 lines 53 lines 53 lines 53 lines
CAN Controller Integrated Integrated Integrated Integrated Integrated Integrated
Programming Interface ISP ISP ISP ISP ISP ISP

جیاکەرەوە سەرەکییەکان

  • Direct 15 MHz match for timing-qualified designs (بەراورد بەAT90CAN32-16MU)
  • Exact 32 KB flash and 64-TQFP configuration (بەراورد بەAT90CAN32-15AZ)
  • Integrated CAN controller with 53 I/O lines (بەراورد بەAT90CAN32-16AU)
  • Established 15 MHz family ordering option (بەراورد بەAT90CAN32-15AT)

تێبینییەکانی دیزاین

Place the decoupling capacitors for each supply rail as close as practical to the associated AT90CAN32-15AT1 pins, with a short ground return to minimize loop area. Route the oscillator and reset-related traces away from CAN, switching-regulator, relay, and motor-drive nodes. The 64-TQFP footprint requires correct land-pattern dimensions and solder-mask design; verify them against the manufacturer package drawing before releasing artwork.

Keep the MCU CAN TX and RX pins connected to a suitable external transceiver rather than to the physical bus directly. Provide a continuous return path beneath the interface, keep the transceiver and protection components near the connector, and separate slow digital logic from sensitive analog inputs. Verify that the selected transceiver, bus baud rate, termination strategy, common-mode range, and isolation requirements are appropriate for the installation environment.

Do not substitute an AT90CAN32 ordering suffix based only on the clock frequency. Confirm the 64-TQFP footprint, flash density, SRAM and EEPROM capacity, temperature grade, qualification status, pin multiplexing, and supply limits against the manufacturer datasheet. When moving from 15 MHz to a 16 MHz member, retest baud-rate tolerances, timer periods, PWM outputs, communication timeouts, and firmware delays that were calibrated to the original clock.

Design the regulator and decoupling network around the MCU's supply-current behavior over clock activity, peripheral load, and CAN interrupt service rather than using an idle-state estimate. Provide local bulk energy close to the device and maintain a quiet return network between the MCU, analog sections, and CAN transceiver. If motors, solenoids, or relays share the board, use separate return paths and filtering to prevent transient current from disturbing communication or timing.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The AT90CAN32-15AT1 is identified as an industrial-grade 64-TQFP MCU, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the exact manufacturer product and quality documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-20 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

at90can32 datasheet atmel at90can32 AT90CAN32-15AT1 datasheet AT90CAN32-15AT1 pinout AT90CAN32-15AT1 specifications AT90CAN32-15AT1 equivalent AT90CAN32-15AT1 replacement AT90CAN32-15AT1 vs AT90CAN32-16MU AT90CAN32-15AT1 TQFP-64 footprint AT90CAN32-15AT1 CAN controller AT90CAN32-15AT1 price AT90CAN32-15AT1 stock AT90CAN32-15AT1 lead time AT90CAN32 15MHz CAN microcontroller

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology AT90CAN32-15AT1 AT90CAN32-15AZ AT90CAN32-15AU AT90CAN32-16MU AT90CAN32-16AU AT90CAN32-15AT AT90CAN32 AVR 8-bit microcontroller RISC microcontroller embedded processor CAN controller Controller Area Network ISP flash EEPROM SRAM TQFP-64 surface mount industrial control automotive electronics sensor gateway motor control interface RoHS REACH
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ