Microchip Technology

ATF16LV8C-10XC - 10ns EECMOS PLD | Microchip Technology

MPN: ATF16LV8C-10XC ✗ Tapus ng Buhay
3 V to 5.5 V Vdss 5 µA maximum Id 20-pin TSSOP Package 83.3 MHz Speed Electrically erasable flash memory Memory
MOQ: 1 |

ATF16LV8C-10XC Ulas

The Microchip Technology ATF16LV8C-10XC is a high-performance EECMOS simple programmable logic device with eight macrocells, a 10 ns maximum pin-to-pin delay, and a 20-pin TSSOP package. It provides eight outputs, with eight product terms allocated to each output, and is designed for compact logic implementations requiring nonvolatile reprogrammable configuration.

A simple programmable logic device, or SPLD, is a programmable-logic IC positioned between fixed gate arrays and complex FPGAs. The ATF16LV8C combines combinational logic and registered logic in an electrically erasable CMOS architecture. Its macrocell-based organization supports configurable product-term logic, while flash-memory technology retains the programmed configuration without requiring a separate configuration device.

Key features include support for speeds down to 10 ns, a maximum 5 µA pin-controlled power-down current, and CMOS- and TTL-compatible inputs and outputs. The architecture incorporates a superset of the generic 16R8 architecture and can directly replace the 16R8 family and most 20-pin combinatorial PLDs. Its eight macrocells provide a practical implementation path for address decoding, control sequencing, and compact combinational functions.

The EECMOS configuration uses electrically erasable flash memory, allowing a design to be reprogrammed without removing the device from the circuit. Eight outputs each receive eight product terms, and three operating modes are selected automatically by configuration software. This combination provides predictable logic mapping in a small 20-pin surface-mount package.

Typical uses include industrial control interfaces, peripheral decoding, test-equipment control, legacy 16R8 logic consolidation, and compact address or command decoding. The device can also serve as a temporary or permanent logic bridge in systems where a small programmable function is needed without implementing a larger FPGA or microcontroller peripheral array.

Designers should preserve the pin assignment and power-down behavior required by the programmed logic, and they should validate timing against the 10 ns maximum pin-to-pin delay specification. Use the manufacturer pin-description table when assigning PCB tracks and confirm the programmed output mode before applying it to critical control paths.

This page summarizes the ATF16LV8C-10XC architecture, package, programming characteristics, drop-in alternatives, comparison parameters, and practical design considerations for engineers evaluating this 20-pin EECMOS PLD.

Mga alternatibo na pwedeng ilagay na ATF16LV8C-10XC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ATF16LV8C-10XC (parehas na form factor at footprint) — pagkakaiba sa Package, Device Type, Power-Down Current, Maximum Pin-to-Pin Delay, Product Terms per Output.

Microchip Technology
Device Type: EEPLD
Power-Down Current: Approximately 5 µA
Ikabit sa ATF16LV8C-10XC →
Microchip Technology
Package: 20-pin PDIP
Device Type: High-performance electrically erasable programmable logic device (EE PLD)
Power-Down Current: 5 µA maximum
Ikabit sa ATF16LV8C-10XC →
Microchip Technology
Package: 20-SOIC, 0.295 in / 7.50 mm width
Device Type: 16V8 electrically erasable programmable logic device
Power-Down Current: 5 uA maximum
Ikabit sa ATF16LV8C-10XC →
Microchip Technology
Package: 20-TSSOP (0.173 inch, 4.40 mm width)
Maximum Pin-to-Pin Delay: 5 ns
Ikabit sa ATF16LV8C-10XC →
Microchip Technology
Package: 20-TSSOP, 4.40 mm width
Device Type: EE PLD
Power-Down Current: 100 uA
Ikabit sa ATF16LV8C-10XC →

ATF16LV8C-10XI

✅ Drop-In
📦 TSSOP-20
Same 10 ns speed grade, 8-macrocell architecture, and TSSOP-20 package; temperature-grade ordering differs.

📋 Alternatibo na Reference (hindi sa katalogo)

ATF16LV8C-10XU

✅ Drop-In
Microchip Technology
📦 TSSOP-20
EEPLD · EECMOS electrically erasable CMOS · 16V8 · 8 macrocells · 8 registers · 20 I/O pins · 10 ns · 83.3 MHz

Magkontak para sa presyo

Tingnan ang Datasheet →

ATF16V8C-5XC

✅ Drop-In
Microchip Technology
📦 TSSOP-20
16V8 Programmable Logic Device (PLD) · EE Flash PLD using EECMOS technology · 8 macrocells · 8 outputs · 5 ns · 5 V · 5 V ±10% · 5 V ±5%

Magkontak para sa presyo

Tingnan ang Datasheet →

ATF16V8C-7XU

✅ Drop-In
Microchip Technology
📦 TSSOP-20
EE PLD · 16V8 · 8 · 8 · 8 · 5 V · 7.5 ns · 5 ns

Magkontak para sa presyo

Tingnan ang Datasheet →

ATF16LV8C-10XC

✅ Drop-In
Microchip Technology
📦 TSSOP-20
16V8 electrically erasable CMOS simple programmable logic device · EEPLD with EECMOS architecture · Electrically erasable flash memory · 8 macrocells · 8 outputs · 8 product terms · 10 ns · 250 gates

Magkontak para sa presyo

Tingnan ang Datasheet →

ATF16LV8C-10XC Mga Pinakamataas na Rating at Electrical Characteristics

Device Type 16V8 electrically erasable CMOS simple programmable logic device
Programmable Logic Type EEPLD with EECMOS architecture
Configuration Memory Technology Electrically erasable flash memory
Number of Macrocells 8 macrocells
Bilang ng Outputs 8 outputs
Product Terms per Output 8 product terms
Maximum Pin-to-Pin Delay 10 ns
Equivalent Gate Capacity 250 gates
Maksimum na Taktiko ng Oras 83.3 MHz
Supply Voltage Range 3 V to 5.5 V
Pin-Controlled Power-Down Current 5 µA maximum
Typical Standby Current 100 nA
Input Compatibility CMOS and TTL compatible
Output Compatibility CMOS and TTL compatible
Packhaging 20-pin TSSOP
Package Dimensions 4.5 mm width x 6.6 mm length x 1.05 mm height
Uri ng Pagpapasok Surface mount
Logic Architecture Compatibility Direct replacement for 16R8 family and most 20-pin combinatorial PLDs
Operating Modes 3 automatically configured operating modes

Gabay sa Pin Configuration ng ATF16LV8C-10XC 4.5 mm width x 6.6 mm length x 1.05 mm height

Pin configuration para sa ATF16LV8C-10XC (4.5 mm width x 6.6 mm length x 1.05 mm height package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 4.5 mm width x 6.6 mm length x 1.05 mm height package para sa ATF16LV8C-10XC

Wala ng detalyadong pinout data na magagamit para sa ATF16LV8C-10XC.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ATF16LV8C-10XC ay nararapat para sa 6 aplikasyons: Address Decoding, Industrial Control Sequencing, Peripheral Interface Control, Legacy 16R8 Consolidation, Test Equipment Control, Low-Power Standby Control.

🔧

Address Decoding

The ATF16LV8C-10XC fits compact address-decoder designs because it provides eight outputs with eight product terms allocated to each output. Each macrocell can be configured through the programming software to implement a required decode equation, allowing several chip-select or region-select functions to be consolidated without a larger FPGA. The 10 ns maximum pin-to-pin delay should be compared with the address-to-enable timing budget, while the 20-pin TSSOP package keeps the implementation compact. Because the device is obsolete, an existing installation can be maintained without redesign when the programmed configuration and pinout remain unchanged.

🏭

Industrial Control Sequencing

The ATF16LV8C-10XC is useful in legacy industrial-control boards where a small amount of deterministic combinational or registered logic must be retained during modernization. Its eight macrocells can implement interlocks, command enables, and sequencing conditions, while EECMOS flash configuration permits updates without socketed programming tools. The 3 V to 5.5 V operating range supports common logic-rail environments, and the 20-pin TSSOP format simplifies repair-board integration. Confirm the exact temperature grade, output-mode configuration, and system timing before using it in newly qualified production equipment.

⚡

Peripheral Interface Control

The ATF16LV8C-10XC can serve as a compact interface controller between an older bus arrangement and discrete control logic. Eight configurable outputs with eight product terms each provide enough capacity for device-select generation, write qualification, interrupt masking, and command decoding. Its electrically erasable flash configuration makes field updates practical, while the maximum 10 ns pin-to-pin delay supports designs whose timing requirements are not more aggressive. Check whether registered outputs are required and ensure that the programmed polarity and power-down state match the peripheral interface.

🔧

Legacy 16R8 Consolidation

The ATF16LV8C-10XC is specifically positioned for designs moving away from generic 16R8-family devices and certain 20-pin combinatorial PLDs. Its architecture is described as a superset of the generic 16R8 architecture, and eight outputs with eight product terms each provide implementation flexibility. This makes the device appropriate for consolidating small decode and control functions on repair or modernization boards. Pin compatibility must still be checked at the schematic level because package presence alone does not establish identical pin functions, and the configured operating mode must match the original circuit.

🖥️

Test Equipment Control

The ATF16LV8C-10XC can implement deterministic control logic in test equipment where sequence generation, fixture selection, or measurement-state gating is required. Eight macrocells provide a practical balance between functional capacity and board area, while the 20-pin TSSOP package simplifies dense instrument control boards. The 10 ns maximum pin-to-pin delay is relevant to fixture timing, and the low-power shutdown option can reduce consumption when a measurement section is inactive. Validate output behavior during configuration, power-up, and power-down transitions because deterministic test systems can be sensitive to transient control states.

🔋

Low-Power Standby Control

The ATF16LV8C-10XC suits small control blocks that must retain a programmed configuration while spending little power between operating events. Its pin-controlled power-down mode provides a maximum specified current of 5 µA, and the family documentation describes a typical 100 nA standby condition. An engineer can assign low-impact wake, alarm, or monitoring functions to the programmable outputs without continuously powering a larger controller. Ensure that every load remains compatible with the output state during standby and that the power-down pin cannot float in the final board design.

What is the ATF16LV8C-10XC?
The ATF16LV8C-10XC is a high-performance EECMOS simple programmable logic device from Microchip Technology with eight macrocells and eight outputs. According to the manufacturer product page, it uses electrically erasable flash memory, supports speed grades down to 10 ns, and includes a pin-controlled power-down option with a maximum 5 µA current.
What is the maximum pin-to-pin delay of ATF16LV8C-10XC?
The ATF16LV8C-10XC has a maximum pin-to-pin delay of 10 ns. The ATF16LV8C datasheet identifies this device as a 10 ns grade, while the manufacturer product page states that the family supports speeds down to 10 ns. This timing figure should be used when evaluating external setup, hold, and propagation requirements.
What package does the ATF16LV8C-10XC use?
The ATF16LV8C-10XC uses a 20-pin TSSOP package for surface-mount assembly. The ATF16LV8C-10XC listing identifies the device as an 8-macrocell, 20-TSSOP programmable logic IC, and a package comparison lists dimensions of approximately 4.5 mm by 6.6 mm by 1.05 mm. Use the manufacturer pin-description table for the final footprint and track assignments.
Can ATF16LV8C-10XC replace a 16R8 PLD?
Yes, the ATF16LV8C-10XC is designed to provide direct replacement for the 16R8 family and most 20-pin combinatorial PLDs. Its eight outputs each have eight allocated product terms, and the architecture supports three automatically configured operating modes. Verify the original device's pin functions and timing before treating the replacement as production-ready.
How much current does the ATF16LV8C-10XC use in power-down mode?
The ATF16LV8C-10XC supports a pin-controlled power-down mode with a maximum current of 5 µA. The manufacturer product page identifies this low-current shutdown option, and the device family documentation also describes a typical 100 nA standby condition. Verify whether the programmed logic or external circuitry requires the output and power-down pins to remain active.
Is ATF16LV8C-10XC electrically erasable and reprogrammable?
The ATF16LV8C-10XC is based on EECMOS technology with electrically erasable flash configuration memory. According to the manufacturer product page, the ATF16LV8C family uses proven electrically erasable flash-memory technology. This allows the logic configuration to be changed in circuit rather than requiring a one-time mask-programmed device.
ATF16LV8C-10XC vs ATF16LV8C-10XI - which is better?
The ATF16LV8C-10XC is the commercial ordering option, while the ATF16LV8C-10XI is a related ATF16LV8C configuration identified in package comparisons. Both use the 20-pin TSSOP format and the same 8-macrocell device family, but the temperature grade is the key selection criterion. Choose the variant whose specified operating-temperature range covers the required environment.
When should I choose ATF16LV8C-10XC instead of ATF16V8C-5XC?
Choose the ATF16LV8C-10XC when its 10 ns EECMOS configuration and flash-programmable architecture best match the existing 20-pin TSSOP design. A comparison identifies the ATF16V8C-5XC as another 20-pin TSSOP device with eight macrocells, but its product family and programming technology differ. Verify pin compatibility, configuration method, speed, and supply requirements before substitution.
Is ATF16LV8C-10XC suitable for industrial control logic?
The ATF16LV8C-10XC can implement compact control logic where reprogrammability, eight macrocells, and a 20-pin TSSOP package are useful. The part also supports 3 V to 5.5 V operation and pin-controlled power-down current of 5 µA maximum. The exact operating-temperature grade must be checked against the application's environmental limits before qualification.
What is the best drop-in replacement for ATF16LV8C-10XC?
The best drop-in candidate is the part that matches the ATF16LV8C-10XC in 20-pin TSSOP pinout, eight-macrocell architecture, supply range, and required timing. The ATF16LV8C-10XI and ATF16LV8C-10XU are same-family 10 ns candidates, while ATF16V8C-5XC and ATF16V8C-7XU require additional validation of pin functions and programming compatibility. No replacement should be approved without schematic-level verification.
What is the ATF16LV8C-10XC equivalent with a 7 ns speed grade?
The ATF16V8C-7XU is a related 20-pin TSSOP, eight-macrocell PLD listed in comparison data for the ATF16LV8C-10XC. Its 7 ns speed designation is 3 ns faster than the target's 10 ns maximum pin-to-pin delay. Because the ATF16V8C and ATF16LV8C families may differ in configuration architecture, confirm pin compatibility and programming requirements before treating it as a drop-in replacement.
Where can I download the ATF16LV8C-10XC datasheet PDF?
The ATF16LV8C-10XC datasheet PDF is available from the linked manufacturer-document mirror, and Microchip's official ATF16LV8C product page provides the family documentation. The manufacturer datasheet is the controlling reference for pin descriptions, electrical characteristics, timing, and programming information. Review the package-specific ordering information before approving a substitute.
Where can I find the ATF16LV8C-10XC pinout?
The ATF16LV8C-10XC pinout is defined in the pin-description section of the ATF16LV8C manufacturer datasheet. The device is packaged in a 20-pin TSSOP, but the complete numbered pin-function table is required for PCB routing and replacement verification. Use that table rather than inferring pin assignments from another ATF16LV8C speed or temperature grade.
How do I use the ATF16LV8C-10XC in an address decoder?
The ATF16LV8C-10XC is suitable for a compact address decoder because it provides eight outputs and eight product terms per output. Program each required decode equation into the appropriate macrocell, then confirm registered or combinational output operation in the configuration software. Validate the 10 ns timing against address-to-enable requirements and preserve the 20-pin TSSOP pin assignments in the PCB layout.
Where can I buy ATF16LV8C-10XC and check its price and lead time?
Use the Request a Quote form on this page to request ATF16LV8C-10XC availability, current pricing, and lead time. The component is identified as obsolete in comparison data, so lifecycle status and allocation should be confirmed during sourcing. The form allows buyers to request the exact 20-pin TSSOP ordering code without relying on a static price that may change.
What are the key specifications of ATF16LV8C-10XC that engineers should know?
The ATF16LV8C-10XC combines eight macrocells, eight outputs, eight product terms per output, a 10 ns maximum pin-to-pin delay, and a 20-pin TSSOP package. According to the manufacturer product page and datasheet, it uses electrically erasable flash memory, operates from 3 V to 5.5 V, provides CMOS- and TTL-compatible I/O, and supports pin-controlled power-down current up to 5 µA maximum.

Impormasyon ng Talumpati sa Engineering for ATF16LV8C-10XC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ATF16LV8C-10XC for maintenance of an existing 10 ns ATF16LV8C design using the 20-pin TSSOP footprint, especially when the programmed logic file, macrocell structure, and pin functions are already established. The ATF16LV8C-10XI and ATF16LV8C-10XU are the closest same-family candidates because they retain the 10 ns speed and eight-macrocell architecture, but their ordering-temperature options must be checked against the required environmental range. Consider ATF16V8C-5XC or ATF16V8C-7XU only after verifying pin functions, configuration compatibility, and system timing; their faster speed ratings do not by themselves prove drop-in behavior. For new designs, a current programmable-logic device with supported lifecycle status may be more appropriate than introducing an obsolete EECMOS SPLD into a new production platform.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ATF16LV8C-10XI ATF16LV8C-10XU ATF16V8C-5XC ATF16V8C-7XU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package TSSOP-20 TSSOP-20 TSSOP-20 TSSOP-20 TSSOP-20
Programmable Logic Type EEPLD EEPLD EEPLD EEPLD EEPLD
Number of Macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells
Speed 10 ns 10 ns 10 ns 5 ns 7 ns

Pangunahing mga Pagkakaiba

  • Direct 16R8-family replacement positioning (kumpara saATF16V8C-5XC)
  • 10 ns timing with eight macrocells (kumpara saATF16V8C-7XU)
  • Flash-based electrically erasable configuration (kumpara saATF16LV8C-15SC)

Talaan ng Disenyo

Do not treat a shared TSSOP-20 outline as proof of electrical compatibility. Compare every pin in the manufacturer pin-description tables, especially configuration, clock, feedback, and power-down functions, and confirm whether the programmed output mode is combinational or registered. The target is listed as obsolete, so a replacement should be validated for logic behavior, setup and hold timing, power-down state, and programming-file compatibility rather than accepted solely by package dimensions.

Route the 20-pin TSSOP footprint according to the package drawing and place decoupling and pull-up or pull-down components close to their associated power and control pins. The device accepts CMOS- and TTL-compatible signals, but unused inputs should not be left floating. Review every output net for power-up and power-down behavior so that disabled peripheral chips are not exposed to an unintended command or selection pulse.

Use the 10 ns maximum pin-to-pin delay as a system-level constraint rather than only a device rating. Include output loading, board-trace propagation, receiver setup and hold requirements, and any skew between related outputs. If the replacement has a 5 ns or 7 ns speed designation, verify that faster transition edges do not create ringing, additional EMI, or incompatible timing assumptions in the surrounding circuit.

Decouple the supply pins according to the manufacturer layout guidance and account for both operating current and the pin-controlled power-down state. The specified maximum power-down current is 5 µA, while a typical standby condition of 100 nA is described for the family. Confirm that the external circuit can tolerate the selected output state and that no pull resistor prevents the device from reaching its intended low-power condition.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The ATF16LV8C is a general-purpose logic IC rather than an automotive-qualified device. Specific environmental and material compliance declarations were not identified for this exact ordering code.

Kaugnay na Hanapin

ATF16LV8C-10XC datasheet ATF16LV8C-10XC pinout ATF16LV8C-10XC datasheet pdf ATF16LV8C-10XC equivalent ATF16LV8C-10XC replacement ATF16LV8C-10XC cross reference ATF16LV8C-10XC TSSOP-20 ATF16LV8C-10XC price ATF16LV8C-10XC stock ATF16LV8C-10XC application circuit ATF16LV8C-10XC vs ATF16V8C-5XC Microchip ATF16LV8C-10XC

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology Atmel ATF16LV8C-10XC ATF16LV8C-10XI ATF16LV8C-10XU ATF16V8C-5XC ATF16V8C-7XU EECMOS electrically erasable CMOS electrically erasable flash memory SPLD simple programmable logic device PLD programmable logic device logic IC semiconductor 16R8 macrocell product term combinational logic registered logic TSSOP-20 TSSOP package family surface-mount technology CMOS TTL 10 ns pin-to-pin delay pin-controlled power-down RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ