ATSAM4S16BA-AU - 120MHz Cortex-M4 MCU | Microchip
MPN: ATSAM4S16BA-AU ✓ چالاکATSAM4S16BA-AU گشتی
An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control, and the ATSAM4S16BA-AU adds Flash memory, SRAM, clock management, communication peripherals, and GPIO around that core. Its 2 KB cache improves instruction-fetch performance, while the Memory Protection Unit, DSP instruction set, and Thumb-2 instruction set support efficient real-time and signal-processing workloads. This places the device in the hierarchy of Cortex-M processor, embedded microcontroller, semiconductor, and programmable control system.
Key features include a maximum operating frequency of 120 MHz, 1 MB of Flash organized as 1M × 8 bits, 128 KB of SRAM, and a 1.62 V to 3.6 V operating-supply range. The dual-bank Flash includes ECC, a security bit, and lock features. The integrated DSP instruction set accelerates common arithmetic operations, while the 2 KB cache supports higher instruction throughput from embedded Flash.
The SAM4S architecture provides a Memory Protection Unit for isolating memory regions, supporting both performance and software reliability. Its pin compatibility with the SAM3N, SAM3S, SAM4N, and 64-pin SAM7S families simplifies migration within the Microchip portfolio. The 64-LQFP package exposes a substantial pin count for general-purpose I/O and peripheral connections while remaining compatible with surface-mount manufacturing and inspection processes.
Typical applications include industrial control panels, sensor-hub and condition-monitoring equipment, building automation controllers, data-acquisition systems, embedded gateways, and industrial communication equipment. The combination of 120 MHz processing, 1 MB Flash, and 128 KB SRAM supports moderate real-time workloads, protocol stacks, local data buffering, and control logic without an external memory interface.
Designers should verify the exact peripheral map, pin multiplexing, clock limits, and operating-temperature grade against the manufacturer datasheet before schematic release. The 1.62 V minimum supply and 3.6 V maximum supply define the operating range, while correct decoupling, clock configuration, programming access, and unused-pin handling are essential for reliable operation.
This product page combines the manufacturer-family specifications, package and memory details, lifecycle information, drop-in alternatives, comparison parameters, and practical design guidance into one engineering-focused reference for selecting and implementing the ATSAM4S16BA-AU.
جێگرەوەکانی جێگۆڕکێ بۆ ATSAM4S16BA-AU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATSAM4S16BA-AU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, Instruction Set, SRAM, Series.
ATSAM4S16BA-AUR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATSAM4S16BA-MU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATSAM4N16BA-AUR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATSAM4SA16BA-AUR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATSAM4S16BA-ANR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATSAM4S16BA-UUR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATSAM4S16BA-AU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M4 Flash Microcontroller |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 1 MB (1M × 8 bits) |
| SRAM | 128 KB |
| Cache Memory | 2 KB |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.62 V to 3.6 V |
| Architecture | ARM Cortex-M4 with Thumb-2 instruction set |
| DSP Support | DSP instruction set |
| Memory Protection | Memory Protection Unit (MPU) |
| Flash Organization | Dual-bank embedded Flash with ECC, security bit, and lock |
| پاکێج | 64-LQFP, 10 mm × 10 mm |
| جۆری دامەزراندن | Surface Mount |
| دۆخی چرخەی ژیان | Active |
| Family Pin Compatibility | Pin-to-pin compatible with SAM3N, SAM3S, SAM4N, and 64-pin SAM7S devices |
| Power Consumption | 200 uA/MHz |
ڕێنمایی ڕێکخستنی پینی ATSAM4S16BA-AU 64-lqfp, 10 mm × 10 mm
ڕێکخستنی پین بۆ ATSAM4S16BA-AU (پاکێجی 64-lqfp, 10 mm × 10 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATSAM4S16BA-AU.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ATSAM4S16BA-AU گونجاوە بۆ 6 بەکارھێنانs: Industrial Machine Controller, Condition Monitoring Hub, Building Automation Controller, Data-Acquisition Controller, Embedded Communications Gateway, Programmable Logic Controller.
Industrial Machine Controller
The ATSAM4S16BA-AU suits compact machine controllers because its 120 MHz ARM Cortex-M4 core can execute real-time control logic while the DSP instruction set accelerates filtering and motion-related calculations. Its 1 MB Flash provides room for application firmware, parameter tables, and diagnostics, while 128 KB of SRAM supports working state and communication buffers. The 64-LQFP package also offers enough pins for sensors, actuators, status indicators, and industrial interfaces. Engineers should allocate pins according to the manufacturer multiplexing table and validate timing margins at the selected clock frequency.
پێشنیارکراو
Condition Monitoring Hub
A condition-monitoring hub can use the ATSAM4S16BA-AU to collect sensor readings, perform filtering, and maintain local diagnostics without relying on a higher-cost application processor. The 120 MHz Cortex-M4 core and DSP instructions are useful for fixed-point signal processing, while 128 KB of SRAM accommodates sampling buffers and communication state. Its 1 MB dual-bank Flash supports firmware updates and parameter storage, subject to the device’s bank-switching and security features. A practical implementation should include watchdog recovery, brownout-aware startup, and communication timeout handling.
پێشنیارکراو
Building Automation Controller
The ATSAM4S16BA-AU fits building automation controllers that coordinate sensors, relays, meters, and network communications while maintaining deterministic local control. Its 120 MHz processing capacity allows concurrent protocol handling and control-loop execution, and the 1 MB Flash can hold application logic and configuration data. The 64-LQFP package provides a practical balance between peripheral access and board area. For reliable operation, use the manufacturer clock and power-sequencing guidance, provide local bulk and high-frequency decoupling, and validate every peripheral pin against the selected board configuration.
پێشنیارکراو
Data-Acquisition Controller
The ATSAM4S16BA-AU can serve as the control and processing element in a compact data-acquisition system. Its 120 MHz Cortex-M4 core handles buffering, scaling, status tracking, and communication, while the DSP instruction set improves throughput for numeric operations. The 128 KB of SRAM supports local sample storage and protocol state, and the 1 MB Flash accommodates firmware plus configuration. Designers should match the ADC interface requirements to the MCU peripherals, define acquisition timing from the peripheral clock specifications, and isolate analog and digital return paths to reduce measurement error.
پێشنیارکراو
Embedded Communications Gateway
The ATSAM4S16BA-AU is suitable for an embedded gateway that bridges local equipment to a serial or network-oriented control layer. Its 120 MHz Cortex-M4 performance can support protocol processing alongside control tasks, while 1 MB of Flash and 128 KB of SRAM provide useful local headroom. The extensive pin count of the 64-LQFP package supports multiple serial interfaces, reset control, status LEDs, and external transceivers. Firmware should isolate communication and real-time tasks, use hardware flow control where required, and include watchdog and network-timeout recovery for unattended operation.
پێشنیارکراو
Programmable Logic Controller
The ATSAM4S16BA-AU can implement a compact programmable logic controller for sequencing, interlocks, timing, and local diagnostics. Its 120 MHz Cortex-M4 core provides substantial control-processing headroom, while the Memory Protection Unit helps separate protected routines and data from general application tasks. Dual-bank Flash and 128 KB of SRAM support structured firmware and working-state requirements. A robust design should include isolated input conditioning, deterministic interrupt priorities, safe-state outputs, and a documented firmware update procedure that accounts for the device’s Flash security and lock features.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATSAM4S16BA-AU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ATSAM4S16BA-AUR | ATSAM4S16BA-MU | ATSAM4N16BA-AUR | ATSAM4SA16BA-AU | ATSAM4S16BA-ANR | ATSAM4S16BA-UUR |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
جیاکەرەوە سەرەکییەکان
- Higher on-chip memory than the 256 KB-flash ATSAM4S4BA class (بەراورد بەATSAM4S4BA-UU)
- Direct SAM4S family migration with unchanged core parameters (بەراورد بەATSAM4S16BA-AUR)
- Pin-compatible portfolio migration path (بەراورد بەATSAM4N16BA-AUR)
تێبینییەکانی دیزاین
Design the supply network for the full 1.62 V to 3.6 V operating range and the maximum 120 MHz operating condition. Place the bulk capacitor and high-frequency bypass capacitors close to the corresponding supply and ground pins, and keep the high-speed return path compact. Verify startup, brownout, and power-sequencing behavior in hardware because firmware execution timing can change as the supply ramp passes intermediate thresholds.
Assign every signal from the manufacturer pin-description and multiplexing tables before routing the PCB. The 64-LQFP footprint provides many multifunction pins, so a board-level assignment error can connect a peripheral to the wrong alternate function. Keep sensitive analog and communication routes away from switching-node returns, provide a continuous ground reference where possible, and follow the recommended land pattern associated with the official package drawing.
Do not assume that a processor-core comparison is sufficient for a drop-in redesign. Compare clock-tree limits, peripheral mapping, interrupt priorities, Flash organization, SRAM allocation, package dimensions, temperature grade, and programming interface. For ATSAM4S16BA-AU migrations within the SAM portfolio, verify pin compatibility on the schematic and confirm that the replacement’s startup, security, and low-power behavior matches the original firmware expectations.
Use the manufacturer power-consumption figures and board thermal model to evaluate junction temperature at the selected clock, voltage, and peripheral activity. The device is listed at 200 uA/MHz for power consumption, but actual board dissipation also depends on I/O loading, voltage, switching activity, and PCB copper. Validate the worst-case operating condition in the assembled enclosure rather than relying only on ambient-temperature estimates.
زانیاری پابەندبوون
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for this exact ordering code. Confirm the current declarations with the manufacturer before qualification.