ATTINY12-8SU 8MHz 1KB AVR Microcontroller | Microchip Technology
MPN: ATTINY12-8SU ✓ چالاکATTINY12-8SU گشتی
A microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, and peripherals in one integrated circuit. The ATTINY12-8SU belongs to the AVR family, using a RISC architecture and a compact instruction set suitable for simple control systems. Its 1KB Flash memory stores the application program, while its 64-byte EEPROM supports nonvolatile parameter storage. The small 8-pin package also makes the device suitable for space-constrained consumer, industrial-control, and accessory products.
Key features include an 8MHz internal-clock operating speed, 1KB of Flash program memory, 64 bytes of EEPROM, six I/O pins, and a 4V to 5.5V operating supply range. The limited memory footprint makes firmware organization and external peripheral use central to the design process. The ATTINY12-8SU is appropriate for simple state machines, push-button interfaces, LED indicators, basic timing, and control functions that do not require networking, large data storage, or high-resolution analog conversion.
The AVR architecture provides a compact execution environment for embedded logic, while the ATtiny12 family targets cost-sensitive applications with modest processing requirements. Because the device has only 1KB of Flash memory, the firmware should reserve space for initialization, interrupt handling, application logic, and any required library routines. Persistent settings should use the EEPROM conservatively because its capacity is limited to 64 bytes. External sensing or actuation may therefore be necessary when the application requires more I/O, memory, or peripheral capability.
Typical uses include simple appliance controls, keyboard interfaces, small sensor-conditioning systems, LED status controllers, and compact embedded automation modules. In these applications, the ATTINY12-8SU can replace a discrete combination of logic gates, timers, and state-control circuitry while simplifying firmware maintenance. Its 8MHz clock provides ample timing resolution for basic control loops, debounce routines, and sequential output control.
Designers should confirm the external crystal or clock requirements, regulator tolerance, input thresholds, and pin multiplexing before committing a board layout. Place decoupling capacitors close to the supply pins and provide adequate pull-up or pull-down resistors for open-drain communication lines. Firmware validation should include reset behavior, brownout conditions, unused-pin states, and worst-case bus timing.
This product page combines the ATTINY12-8SU electrical identity, package and memory details, application guidance, replacement analysis, and practical design considerations for engineers evaluating compact 8-bit embedded-control designs.
جێگرەوەکانی جێگۆڕکێ بۆ ATTINY12-8SU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY12-8SU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Flash Program Memory, Maximum Clock Frequency, Package, Supply Voltage.
ATTINY12-8SI
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATTINY12L-4SI
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY11-6SU
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY12-8SU-T
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY12-8SU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 8-bit AVR RISC microcontroller |
| زۆرترین فرێکوێنسیی کاتژمێر | 8 MHz |
| Flash Program Memory | 1 KB |
| Program Memory Organization | 512 x 16 words |
| EEPROM | 64 bytes |
| ڤۆڵتاژی دابینکردنی کارکردن | 4 V to 5.5 V |
| I/O Port Count | 6 |
| Architecture | AVR RISC |
| پاکێج | 8-pin SOIC |
| جۆری دامەزراندن | Surface mount |
| Oscillator | Internal oscillator |
| دۆخی چرخەی ژیان | Active |
| Programming Memory | Flash |
| Maximum Operating Frequency | 8 MHz |
| ڤۆڵتیەی دابینکردن | 4 V to 5.5 V |
| Instruction Set | AVR 8-bit RISC instruction set |
ڕێکخستنی پینی ATTINY12-8SU
| پین 1 | PB0 — I/O pin |
| پین 2 | PB1 — I/O pin |
| پین 3 | PB2 — I/O pin |
| پین 4 | PB3 — I/O pin |
| پین 5 | GND — Ground connection |
| پین 6 | PB4 — I/O pin |
| پین 7 | PB5 — I/O pin |
| پین 8 | VCC — Supply voltage input |
بەکارهێنانە باوەکان
ATTINY12-8SU گونجاوە بۆ 6 بەکارھێنانs: Simple Appliance Controls, LED Status and Sequencing, Sensor Signal Conditioning, Battery-Powered Accessory Modules, Keypad and Button Interfaces, Compact Automation and Control Boards.
Simple Appliance Controls
The ATTINY12-8SU is suitable for compact appliance-control panels that need a small number of digital inputs and outputs. Its six I/O pins can support button sensing, mode selection, relay or indicator control, and basic debounce logic, while the 8MHz clock provides adequate timing resolution for state-machine transitions. The 1KB Flash limit favors a focused application program with minimal library overhead, and 64 bytes of EEPROM can retain a small number of settings such as operating mode or calibration values. A regulated 4V to 5.5V supply, local decoupling, and careful unused-pin handling should be included in the board design.
پێشنیارکراو
LED Status and Sequencing
The ATTINY12-8SU can manage LED status indicators, warning lamps, and simple sequencing effects in a compact embedded module. Six I/O pins provide enough channels for several discrete outputs while leaving control logic for button input or a serial command interface. Its 8MHz maximum frequency supports deterministic timing loops and nonblocking animation sequences without a separate timer IC. Because the device has 1KB of Flash, applications should use compact display routines and avoid unnecessary feature overhead. Series-current limiting, ground-return planning, and logic-level compatibility with the LED driver should be validated during hardware review.
پێشنیارکراو
Sensor Signal Conditioning
The ATTINY12-8SU is useful for basic sensor-signal conditioning when the input can be reduced to digital thresholds and the output requires only a few control actions. A small microcontroller can filter noisy switch inputs, apply hysteresis, debounce mechanical sensors, and translate sensor states into actuator commands. The 8MHz clock allows straightforward time-based filtering, while the 64-byte EEPROM can store a compact configuration record. The device does not replace a high-resolution ADC or precision analog front end, so analog signals should first be conditioned to a valid logic level. Supply-noise control and careful grounding are especially important when the sensor and switching circuitry share the board.
پێشنیارکراو
Battery-Powered Accessory Modules
The ATTINY12-8SU can serve as the control core in a small battery-powered accessory when the design uses the device's limited processing and memory efficiently. Its compact 8-pin SOIC package leaves board area for the power source, regulator, and interface components, while the 8MHz clock is sufficient for low-duty-cycle state management. Firmware can use sleep modes and periodic wakeups to reduce energy use, but the final battery life depends on the regulator quiescent current, sensor load, and external switching losses. During validation, measure both active and sleep-state current and confirm that the power rail remains within the 4V to 5.5V operating range.
پێشنیارکراو
Keypad and Button Interfaces
The ATTINY12-8SU is appropriate for small keypads, panel buttons, and menu interfaces where the number of physical inputs is modest. Its six I/O pins can implement scanned switch matrices or individual button inputs, and the 8MHz clock supports reliable debounce and repeat timing. The 1KB Flash capacity favors a simple event-driven interface rather than a graphical menu system, while the EEPROM can hold a short configuration record. Designers should account for switch bounce, connector bounce, ESD protection, and input levels at the connector. Keeping the scan loop deterministic also helps simplify production testing and field diagnostics.
پێشنیارکراو
Compact Automation and Control Boards
The ATTINY12-8SU can act as a local controller in a compact automation node that reads a small set of digital inputs and drives simple outputs through a serial or discrete interface. Its 8MHz AVR core, 1KB Flash, and 64-byte EEPROM are adequate for deterministic supervisory logic, status reporting, and fault-latching behavior. The device is best positioned as a local helper rather than the primary system processor when networking, extensive logging, or multi-channel control is required. A robust design should include a reset strategy, brownout margin, input protection, and a communication interface whose logic levels remain compatible with the 4V to 5.5V supply environment.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATTINY12-8SU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ATTINY12-8SI | ATTINY12L-4SI | ATTINY11-6SU | ATTINY12-8SU-T |
|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC |
| Flash Program Memory | 1 KB | 1 KB | 1 KB | 512 bytes | 1 KB |
| EEPROM | 64 bytes | 64 bytes | 64 bytes | 64 bytes | 64 bytes |
| I/O Pins | 6 | 6 | 6 | 6 | 6 |
جیاکەرەوە سەرەکییەکان
- Higher operating speed than the low-voltage ATtiny12L variant (بەراورد بەATTINY12L-4SI)
- Full 1KB Flash for larger compact control programs (بەراورد بەATTINY11-6SU)
- Same compact package and interface family for PCB reuse (بەراورد بەATTINY12-8SI)
تێبینییەکانی دیزاین
Use a regulator whose output remains within the ATTINY12-8SU 4V to 5.5V operating range across input voltage, temperature, and load. Place the supply bypass capacitor close to VCC and provide a short, low-impedance ground return to pin 5. If the board also drives relays, motors, or LED strings, isolate those switching currents from the microcontroller supply path and include adequate local bulk decoupling.
Keep the eight-pin SOIC footprint within the manufacturer package drawing and preserve clearances around exposed copper, although this package does not expose a thermal pad. Route programming and communication signals away from noisy switching nodes, and maintain a continuous ground reference beneath the device where practical. Confirm the orientation of pin 1 during PCB review because incorrect SOIC orientation can reverse power and port assignments.
The 1KB Flash and 64-byte EEPROM are the principal design limits. Include reset-vector space, interrupt routines, and required library code in the memory budget rather than checking only the main application. EEPROM wear can be reduced by batching configuration changes and avoiding frequent writes. Test reset, brownout, unused-pin, and power-cycling behavior because these conditions can reveal firmware assumptions that are not visible in normal operation.
زانیاری پابەندبوون
Lifecycle information identifies the ATTINY12-8SU as active. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the manufacturer product documentation or current compliance records.