Microchip Technology

PIC12F752-I/SN - 20MHz 8-Bit Flash MCU | Microchip Technology

MPN: PIC12F752-I/SN ✓ چالاک
8-pin SOIC Package 20 MHz Speed 1.75 KB (1K x 14 words) Memory
MOQ: 1 |

PIC12F752-I/SN گشتی

The Microchip Technology PIC12F752-I/SN is an 8-bit PIC mid-range flash microcontroller rated for operation up to 20 MHz, with 1.75 KB of flash program memory organized as 1K x 14 words and 64 bytes of data RAM. The device is packaged in an 8-pin SOIC and provides six I/O lines, two high-speed analog comparators, and one Capture/Compare/PWM module. Its internal 8 MHz oscillator supports a 5 MIPS instruction rate when operating with the appropriate clock configuration.

A PIC mid-range 8-bit microcontroller is a compact embedded-control device that combines a processor core, flash memory, RAM, oscillators, and dedicated peripherals on one integrated circuit. The PIC architecture belongs to the broader 8-bit microcontroller and embedded-controller hierarchy, making it useful for products requiring inexpensive deterministic control, flexible serial programming, and mixed analog and digital signal acquisition. PIC12F752 is positioned for compact control, sensing, and low-pin-count automation products.

The PIC12F752-I/SN combines 1.75 KB of self-programmable flash with 64 bytes of data RAM. Two analog comparators provide 20 ns response performance, while the Capture/Compare/PWM peripheral supports timing and basic waveform-generation functions. Six I/O pins make the device useful for small control loops, sensor interfaces, and compact embedded products. The internal 8 MHz oscillator eliminates the need for an external clock in designs that do not require a different clock frequency.

The mid-range PIC core executes a 35-instruction set and supports a 200 ns instruction cycle at the 20 MHz maximum operating frequency. The MCU also includes an internal oscillator, self-read/write flash capability, and the low-pin-count protections described in the PIC12F752/HV752 family datasheet. These characteristics make the device practical for applications in which program memory is sufficient for compact control firmware rather than intensive computation.

Typical uses include simple motor or actuator control, temperature and industrial sensor interfaces, LED status and signage controllers, compact power-system monitoring, and small consumer products. The two comparators are especially useful for direct threshold detection, while the CCP module can reduce external timing-component requirements. The six available I/O lines should be considered carefully when designing a system that needs multiple digital signals and analog inputs.

For PCB implementation, use the manufacturer's SOIC pinout and pin-description table, provide the required programming and decoupling connections, and maintain a clear signal path between the six I/O pins. The -I suffix denotes the industrial-temperature grade, while /SN identifies the SOIC package. Before production release, validate startup, oscillator behavior, programming configuration, peripheral pin assignments, and analog switching at the lowest intended supply voltage.

This product page combines the manufacturer datasheet, distributor specifications, lifecycle information, and practical design guidance for evaluating the PIC12F752-I/SN in compact embedded-control designs. It also distinguishes confirmed drop-in alternatives from variants that use different package dimensions or pin arrangements, helping engineers make a PCB-compatible sourcing decision.

جێگرەوەکانی جێگۆڕکێ بۆ PIC12F752-I/SN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC12F752-I/SN (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Internal Oscillator, ADC, Operating Temperature, Maximum CPU Frequency.

Microchip Technology
Package: 8-pin SOIC (SN, 150 mil)
ADC: 10-bit, 4 channels, 100 ksps
Maximum CPU Frequency: 20 MHz (5 MIPS)
Microchip Technology
Package: 8-SOIC (SN)
Internal Oscillator: 8 MHz (calibrated, PLL to 20 MHz)
ADC: 10-bit, 4 channels
Microchip Technology
Package: 8-SOIC (SN), 0.154" (3.90 mm) width
ADC: 1 x 8-bit, 4 channels
Operating Temperature: -40C to +125C
Microchip Technology
Package: 8-SOIC (SN, 3.90 mm body width)
Internal Oscillator: 8 MHz factory-calibrated
Operating Temperature: -40C to +85C (Industrial)

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

PIC12F752-I/SN زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit Flash PIC mid-range microcontroller
زۆرترین فرێکوێنسیی کاتژمێر 20 MHz
Instruction Execution Time 200 ns
Instruction Set 35 single-word instructions
Program Memory 1.75 KB (1K x 14 words)
Program Memory Type Flash with self-read/write capability
Data RAM 64 bytes
Internal Oscillator 8 MHz
Maximum Instruction Rate 5 MIPS
I/O Pin Count 6
Analog Comparator Count 2
Comparator Response Time 20 ns
Capture/Compare/PWM Modules 1
ADC Resolution 10-bit
پاکێج 8-pin SOIC
جۆری دامەزراندن Surface mount
Temperature Grade Industrial grade

ڕێکخستنی پینی PIC12F752-I/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 VDD — Positive supply voltage
پین 2 RA5/ICSPCLK — General-purpose I/O port A bit 5 or programming clock
پین 3 RA4/T1CKI — General-purpose I/O port A bit 4 or Timer1 clock input
پین 4 RA3/AN3/C1IN- — General-purpose I/O port A bit 3, analog input, or comparator input
پین 5 RA2/AN2/C1OUT/INT — General-purpose I/O port A bit 2, analog input, comparator output, or external interrupt
پین 6 RA1/AN1/C1IN+ — General-purpose I/O port A bit 1, analog input, or comparator input
پین 7 RA0/AN0/C1OUT — General-purpose I/O port A bit 0, analog input, or comparator output
پین 8 VSS — Ground reference

بەکارهێنانە باوەکان

PIC12F752-I/SN گونجاوە بۆ 6 بەکارھێنانs: Industrial Threshold Detection, Compact Motor and Actuator Control, LED Signage and Illumination Control, Temperature and Analog Sensor Interface, Smart Home and IoT Control Node, Embedded Timing and Pulse Generation.

🏭

Industrial Threshold Detection

The PIC12F752-I/SN fits compact industrial threshold-detection modules because its two analog comparators provide a specified 20 ns response time while the 8-bit mid-range core handles the decision logic. The six I/O pins can connect sensor inputs, alarm outputs, and status indicators without requiring a larger microcontroller package. Its 1.75 KB of flash is sufficient for debouncing, filtering, configuration storage, and event handling, while 64 bytes of RAM supports compact working states. The -I suffix identifies the industrial-temperature grade, making the device appropriate for equipment where temperature reliability and fast analog comparison are more important than high memory capacity.

🔧

Compact Motor and Actuator Control

The PIC12F752-I/SN can control small motors, valves, relays, and actuators where the control sequence is compact and timing precision matters. Its Capture/Compare/PWM peripheral provides a dedicated resource for pulse-width generation, while six I/O lines can handle direction, drive-enable, feedback, and fault signaling. Operation up to 20 MHz supports deterministic supervisory logic and the documented 200 ns instruction execution time. Design the power stage separately, add appropriate driver protection, and verify stall current, switching transients, and thermal conditions rather than driving a motor directly from a GPIO pin.

💡

LED Signage and Illumination Control

The PIC12F752-I/SN is suitable for compact LED-sign controllers, status indicators, and decorative lighting modules that require multiple timed outputs and compact control logic. Six I/O lines permit direct control of grouped channels, while the CCP module can generate repeatable timing waveforms for brightness effects or blinking patterns. The 1.75 KB flash capacity accommodates lighting tables, state machines, and configuration settings, and the internal 8 MHz oscillator avoids an external crystal in simpler products. Current limiting and transistor drive circuitry should be designed separately because the MCU pins are intended for logic-level control rather than direct LED power switching.

🧩

Temperature and Analog Sensor Interface

The PIC12F752-I/SN can serve as the controller in a compact temperature-monitoring or analog-sensing module where six I/O lines and limited RAM are sufficient. Two comparators can provide fast reference comparison, while the microcontroller performs counting, filtering, alarm handling, and communication tasks. The documented 5 MIPS rate at the 8 MHz internal oscillator provides useful control margin for responsive sampling and debounce routines. Select an external sensor with an appropriate analog output, condition it for the MCU input range, and confirm the electrical characteristics and application-specific accuracy in the manufacturer data sheet.

🧩

Smart Home and IoT Control Node

The PIC12F752-I/SN can implement a small smart-home sensor node, relay controller, or low-cost IoT interface when the product requires local logic rather than a high-performance application processor. Six I/O lines support digital inputs, actuator commands, and status indicators, while the 1.75 KB flash stores compact protocol and control firmware. The internal 8 MHz oscillator supports economical timing, and the 64-byte RAM is suitable for constrained protocol buffers and state variables. Designers should include the required communications interface, authentication, and update strategy rather than treating the MCU alone as a complete connected product.

⏱️

Embedded Timing and Pulse Generation

The PIC12F752-I/SN is well suited to compact timing, pulse-generation, and sequencing products because its CCP peripheral and 20 MHz maximum clock provide dedicated timing resources alongside general-purpose control logic. The 200 ns instruction cycle allows deterministic task execution, and six I/O lines are sufficient for a timing output, capture input, enable, fault, and status signals. The internal 8 MHz oscillator simplifies designs that do not require high accuracy. For externally synchronized equipment, verify capture behavior, tolerance, jitter, and maximum timing rates under the intended supply-voltage and temperature conditions.

کورتەی بەرهەمە پێشنیارکراوەکان

PIC16F1703 Newer Microchip Technology PIC family device identified by the manufacturer as an alternative product بەکارهێنراوە لە: Industrial Threshold Detection, Compact Motor and Actuator Control, LED Signage and Illumination Control, Temperature and Analog Sensor Interface, Embedded Timing and Pulse Generation PIC16F76-I/SP Microchip Technology بەکارهێنراوە لە: Industrial Threshold Detection, LED Signage and Illumination Control, Embedded Timing and Pulse Generation MCP608-I/SN Microchip Technology بەکارهێنراوە لە: Compact Motor and Actuator Control, Temperature and Analog Sensor Interface, Smart Home and IoT Control Node SP3232EET-L MaxLinear بەکارهێنراوە لە: Smart Home and IoT Control Node
What are the key specifications of PIC12F752-I/SN that engineers should know?
The PIC12F752-I/SN is an 8-bit flash PIC mid-range microcontroller with a 20 MHz maximum clock, 1.75 KB of flash memory, 64 bytes of RAM, six I/O lines, and an 8-pin SOIC package. According to the Microchip Technology PIC12F752/HV752 data sheet, the device also includes two 20 ns analog comparators, one Capture/Compare/PWM module, and an internal 8 MHz oscillator. These specifications position it for compact embedded-control, sensing, timing, and low-cost automation designs.
What is the operating voltage of PIC12F752-I/SN?
The PIC12F752-I/SN supports the operating range specified for the industrial PIC12F752 family in the Microchip Technology PIC12F752/HV752 data sheet. The exact recommended supply-voltage limits, voltage-dependent performance curves, and brownout thresholds should be taken from the device electrical-characteristics tables before design release. Use the manufacturer pin-description table when assigning VDD and VSS, and verify the chosen supply range against oscillator, comparator, and flash-programming requirements.
How much flash memory and RAM does PIC12F752-I/SN have?
The PIC12F752-I/SN contains 1.75 KB of flash program memory organized as 1K x 14 words and 64 bytes of data RAM. According to Microchip Technology product and distributor specifications, the flash supports self-read/write capability. This memory footprint is appropriate for compact control firmware, state-machine logic, parameter handling, and modest peripheral configuration rather than data-intensive applications or large protocol stacks.
Where can I download the PIC12F752-I/SN datasheet PDF?
The PIC12F752-I/SN datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/40001576D.pdf. The document is titled PIC12F752/HV752 Data Sheet and covers the PIC12F752 and PIC12HV752 families, including the 8-pin PDIP, SOIC, and DFN options. Use its Figure 1-1 and Table 1-1 for block diagrams and pin descriptions relevant to the SOIC device.
Where can I find the PIC12F752-I/SN pinout?
The PIC12F752-I/SN pinout is shown in Figure 1-1 and Table 1-1 of the Microchip Technology PIC12F752/HV752 data sheet. The 8-pin SOIC connects VDD and VSS as the supply pins, with the remaining six positions providing the GPIO and peripheral-multiplexed functions. Use the pin-description table as the authority for each port, analog, programming, and alternate-function designation before laying out or modifying a board.
What can replace the PIC12F752-I/SN on the same PCB?
No exact, manufacturer-confirmed drop-in replacement is identified for the PIC12F752-I/SN by the available cross-reference information. The PIC12F752-I/MF is the same device family but uses an 8-pin DFN package, so it cannot replace an 8-pin SOIC without a PCB redesign. Before approving any substitute, verify the SOIC dimensions, pin numbering, power pins, programming interface, oscillator configuration, peripheral assignments, and operating limits against the manufacturer datasheet.
Is PIC12F752-I/SN the same as PIC12HV752-I/P?
No, the PIC12F752-I/SN and PIC12HV752-I/P are not interchangeable in the available family information. The -I/SN device is an 8-pin SOIC PIC12F752 variant, while the PIC12HV752 is identified as a related family member with a different package configuration. Their flash-memory, voltage, pinout, and programming characteristics must be compared directly before any substitution is considered.
When should I choose PIC12F752-I/SN over another PIC12-family microcontroller?
Choose the PIC12F752-I/SN when a design needs an 8-pin SOIC footprint, six GPIO lines, 1.75 KB of flash, 64 bytes of RAM, two fast comparators, one CCP module, and operation up to 20 MHz. It is a strong fit for compact control products that need more flash than a very small baseline MCU but do not require larger RAM, more I/O, or a higher-pin-count package. Confirm the required peripheral mix and supply range before final selection.
Is PIC12F752-I/SN suitable for industrial sensor interfaces?
The PIC12F752-I/SN is suitable for compact sensor-interface designs that fit within six I/O lines, 1.75 KB of flash, and 64 bytes of RAM. Its two 20 ns comparators can support fast threshold or window detection, and the CCP module can handle timing or waveform functions. The -I ordering code identifies the industrial-temperature variant, while the final design must still verify operating voltage, comparator behavior, and environmental requirements.
How do PIC12F752-I/SN and PIC12F635T-I/SN compare?
The PIC12F752-I/SN and PIC12F635T-I/SN are related 8-bit PIC microcontrollers, but the available comparison information does not establish that they are pin-to-pin drop-in equivalents. The PIC12F752 offers 1.75 KB of flash, 64 bytes of RAM, six I/O lines, two comparators, and a maximum clock of 20 MHz. Check the complete pin descriptions and peripheral requirements of the PIC12F635T before treating it as a PCB-compatible replacement.
What programming tools are compatible with PIC12F752-I/SN?
Microchip Technology identifies the MPLAB PM3 Universal Device Programmer as compatible with its PICmicro device family, including PIC12 devices. The PIC12F752-I/SN can therefore be programmed using an appropriate Microchip-supported programmer and programming adapter. Confirm programmer socket, target voltage, interface signals, and the exact device variant in the selected programmer documentation before production programming.
How much current does the PIC12F752-I/SN consume?
The operating-current behavior of the PIC12F752-I/SN depends on clock configuration, supply voltage, peripherals, I/O loading, and whether the CPU is active or asleep. The Microchip Technology PIC12F752/HV752 data sheet is the appropriate source for current-versus-frequency curves and sleep-mode measurements. Use those operating conditions to size the supply regulator and calculate average and peak current for the complete product.
Where can I buy PIC12F752-I/SN and check its price?
The current commercial price, quantity breaks, stock position, and lead time should be requested through the Request a Quote form on this page. Manufacturer, distributor, and authorized-channel status can affect lifecycle, traceability, and sourcing options. For production procurement, provide the exact MPN PIC12F752-I/SN, target quantity, delivery location, and required date so the request reflects the correct ordering configuration.
What is the lead time for PIC12F752-I/SN?
The current lead time for PIC12F752-I/SN should be requested through the Request a Quote form on this page using the exact MPN and required quantity. Lead time can vary with order quantity, procurement channel, packaging format, and inventory position. Microchip Technology lists the PIC12F752 family as in production, but that lifecycle statement does not by itself guarantee a delivery interval for every order.
Is PIC12F752-I/SN in stock?
Live inventory for PIC12F752-I/SN should be confirmed through the Request a Quote form on this page. Distributor listings and product-page stock indicators change over time and should not be treated as a guaranteed allocation. Include the required quantity, date, and shipping destination in the request so the quotation reflects the current orderable configuration and delivery commitment.
What is the best Microchip Technology equivalent for PIC12F752-I/SN?
The closest identified Microchip Technology family member is PIC12F752-I/MF, which uses an 8-pin DFN package instead of the target's 8-pin SOIC package. It is therefore not a board-level drop-in replacement for an existing PIC12F752-I/SN footprint. If an SOIC alternative cannot be sourced, evaluate a redesign using PIC12F752-I/MF or select a newer compatible device only after reviewing pin, memory, peripheral, programming, and lifecycle requirements.

داتای سەرچاوەی ئەندازیاری بۆ PIC12F752-I/SN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the PIC12F752-I/SN when the design fits an 8-pin SOIC footprint and needs six I/O lines, 1.75 KB of flash, 64 bytes of RAM, two fast comparators, one CCP module, and a maximum clock of 20 MHz. It is particularly useful for compact industrial sensing, timing, LED-control, and actuator-control products where an internal oscillator removes the need for external clock components. The PIC12F752-I/MF is not a drop-in substitute because it uses an 8-pin DFN package. The PIC12HV752-I/P is a related family member with a different package and must not be assumed to share the target's board footprint. If the target device is unavailable or the application needs more RAM, GPIO, communication peripherals, or a newer lifecycle path, evaluate a newer Microchip PIC family member or another controller as a deliberate redesign. Validate supply voltage, programming method, oscillator behavior, analog thresholds, and thermal limits before production release.

تێبینییەکانی دیزاین

Choose the regulator and supply-decoupling network around the electrical-characteristics tables in the manufacturer data sheet, including operating voltage, brownout behavior, and current limits. Place the decoupling capacitor close to VDD and VSS with a short return path to reduce supply transients. Avoid routing high-current loads through the same PCB area as sensitive comparator inputs, and account for startup and sleep current when selecting the power source.

Follow the Figure 1-1 pinout and Table 1-1 pin-description information when assigning the six multiplexed I/O functions. Keep programming-interface traces accessible for production programming, separate analog comparator inputs from switching nodes, and route the VSS return directly to the supply ground reference. Recheck every pin after assigning analog, timer, interrupt, and programming functions because several peripheral signals share the same six I/O positions.

Do not assume that the 1.75 KB flash figure means 1.75 KB of general-purpose RAM; the device has 1.75 KB of flash program memory and 64 bytes of data RAM. Likewise, do not use a similarly named PIC12HV752 or a different-package PIC12F752 variant as a direct replacement. Confirm package dimensions, pin functions, programming configuration, peripheral requirements, voltage limits, and lifecycle status before releasing a substitute into production.

The internal 8 MHz oscillator supports a compact design without an external crystal, but clock accuracy and timing performance depend on operating conditions and configuration. For products requiring precise timekeeping, synchronization, or long-period measurement, evaluate oscillator tolerance over temperature and supply voltage or add an external timing source. Use the CCP peripheral only after reviewing its dedicated pin assignment and external-interrupt behavior.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer product page and data sheet excerpts do not provide explicit compliance declarations for this ordering code, so each compliance field remains unknown.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PIC12F752-I/SN datasheet PIC12F752-I/SN pinout PIC12F752-I/SN specifications PIC12F752-I/SN price PIC12F752-I/SN stock PIC12F752-I/SN equivalent PIC12F752-I/SN replacement PIC12F752-I/SN programming PIC12F752-I/SN application circuit PIC12F752-I/SN vs PIC12F635T-I/SN Microchip Technology PIC12F752-I/SN PIC12F752 8-SOIC microcontroller PIC12F752 20MHz 1.75KB flash PIC12F752 PIC16F1703 comparison

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC12F752-I/SN PIC12F752 PIC12HV752 PIC16F1703 PIC16F76-I/SP PIC12F752-I/MF PIC12F635T-I/SN 8-bit microcontroller PIC mid-range core PIC RISC architecture Flash program memory data RAM internal oscillator Capture/Compare/PWM CCP analog comparator I/O port MPLAB PM3 8-pin SOIC SOIC package family surface-mount package industrial temperature grade
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ