Microchip Technology

ATTINY261A-SU - 20MHz 8-bit AVR MCU | Microchip

MPN: ATTINY261A-SU ✓ چالاک
2.5 V, 3.3 V, or 5 V Vdss 20-pin SOIC Package 20 MHz Speed 2 KB (1K x 16) Memory
MOQ: 1 |

ATTINY261A-SU گشتی

The Microchip Technology ATTINY261A-SU is a 20 MHz, 8-bit AVR RISC microcontroller with 2 KB of Flash memory, 128 bytes of EEPROM, 128 bytes of SRAM, and 16 general-purpose I/O lines in a 20-pin SOIC package. It is designed for compact embedded control tasks that require fast event handling, modest program storage, and a small footprint.

An 8-bit AVR microcontroller is a reduced-instruction-computing controller built around the AVR register and instruction architecture. Within the embedded-device hierarchy, it belongs to the MCU class, combines a CPU core with embedded memory and peripherals, and is programmed to supervise sensors, actuators, communications, and user interfaces. The ATTINY261A family is particularly appropriate for cost-sensitive control systems whose firmware and working data fit within 2 KB of Flash and 128 bytes of SRAM.

The device provides 32 general-purpose working registers, an 8-bit timer/counter with compare modes, an 8-bit high-speed timer/counter, a Universal Serial Interface, and internal system resources. Its 20 MHz operating speed gives embedded logic sufficient throughput for responsive control, while the 16 I/O lines allow connection of digital inputs, outputs, and mixed signal functions according to the device pin configuration. In-System Programmable Flash supports programming and firmware updates through the AVR programming interface.

The ATTINY261A is implemented as a high-performance picoPower 8-bit AVR RISC microcontroller. The ATtiny261A/461A/861A family uses an in-system-programmable Flash architecture and combines the 2 KB, 4 KB, or 8 KB memory configurations shown in the family datasheet. The ATTINY261A-SU corresponds to the 2 KB Flash configuration and is offered in a 20-pin SOIC tube package for standard industrial temperature operation.

Typical uses include compact motor or actuator controllers, LED dimming and lighting modules, sensor-interface nodes, low-power consumer accessories, power-control boards, and small industrial automation modules. Its combination of 20 MHz processing, two timers, a Universal Serial Interface, and 16 I/O lines supports control loops, pulse generation, serial communication, and discrete input monitoring without a larger external digital controller.

PCB design should preserve short, clean return paths for supply and ground and should follow the pin-specific decoupling and programming-interface guidance in the manufacturer datasheet. Because the SOIC package provides fine-pitch leads, verify land-pattern orientation and inspect solder joints carefully. Confirm the exact peripheral functions assigned to each I/O pin before defining the board schematic because alternate-function assignments vary by device variant and pin.

This technical summary organizes the controller’s memory, timing, I/O, package, migration, and design considerations for engineers evaluating the ATTINY261A-SU in a new embedded platform. It also distinguishes the verified original ATtiny261 migration path from unsupported assumptions about cross-brand equivalence, helping design teams make pin-, firmware-, and qualification-aware component decisions.

جێگرەوەکانی جێگۆڕکێ بۆ ATTINY261A-SU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY261A-SU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, General-Purpose I/O Lines, General-Purpose Working Registers, Maximum Clock Frequency, Package.

Microchip Technology
Flash Memory: 16 KB
Maximum Clock Frequency: 16 MHz
بەراوردکردن لەگەڵ ATTINY261A-SU →
Microchip Technology
Flash Memory: 2 KB (1 K x 16 bits)
General-Purpose I/O Lines: 16
General-Purpose Working Registers: 32
بەراوردکردن لەگەڵ ATTINY261A-SU →

ATTINY261

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin SOIC
Same 20-pin device position and functional resources, but ATTINY261A uses a different manufacturing process; some electrical characteristics differ while the A-family device retains 2 KB Flash, 128-byte SRAM, and 128-byte EEPROM.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATTINY261A-SU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit AVR RISC microcontroller
زۆرترین فرێکوێنسیی کاتژمێر 20 MHz
Flash Memory 2 KB (1K x 16)
EEPROM 128 bytes
SRAM 128 bytes
General-Purpose I/O Lines 16 lines
General-Purpose Working Registers 32 registers
Timer/Counter 8-bit timer/counter with compare modes
High-Speed Timer/Counter 8-bit high-speed timer/counter
Serial Interface Universal Serial Interface
ڤۆڵتیەی دابینکردن 2.5 V, 3.3 V, or 5 V
پلەی گەرمیی کارکردن -40°C to +85°C
پاکێج 20-pin SOIC
Package Shipping Form Tube
Programming In-System Programmable Flash
دۆخی RoHS Compliant

ڕێنمایی ڕێکخستنی پینی ATTINY261A-SU tube

ڕێکخستنی پین بۆ ATTINY261A-SU (پاکێجی tube). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی tube بۆ ATTINY261A-SU

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATTINY261A-SU.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ATTINY261A-SU گونجاوە بۆ 6 بەکارھێنانs: Compact Sensor Interface Controller, LED Dimming and Lighting Control, Small Motor and Actuator Control, Power Control and Energy Management, Consumer Accessory Control, Embedded Communication Gateway Module.

🧩

Compact Sensor Interface Controller

The ATTINY261A-SU fits compact sensor nodes because it combines a 20 MHz AVR core with 16 general-purpose I/O lines and 128 bytes of SRAM. A design can sample digital sensor signals, apply threshold logic, and update an actuator without adding a larger processor. The 8-bit timer/counter and high-speed timer/counter provide timing resources for periodic sampling or pulse output, while the Universal Serial Interface can support a simple serial peripheral. The main constraint is firmware footprint: 2 KB of Flash and 128 bytes of SRAM favor direct control loops over elaborate protocol stacks.

💡

LED Dimming and Lighting Control

ATTINY261A-SU is appropriate for compact LED-driver and lighting-control modules where the required logic fits within 2 KB of Flash. Its 16 I/O lines can support switch inputs, status indicators, and digital control signals, while the two timer/counter sections can generate timing sequences for dimming, blinking, or effect patterns. The 20 MHz clock allows the firmware to service multiple time-based events, and the Universal Serial Interface can accommodate simple external control. Designers should account for the 128-byte SRAM limit and avoid allocating large display or animation buffers in RAM.

🏭

Small Motor and Actuator Control

The ATTINY261A-SU can serve as the supervisory controller in a small motor or actuator module. Its 8-bit timer/counter with compare modes and separate 8-bit high-speed timer/counter support repeatable timing, pulse generation, and basic closed-loop update routines. Sixteen I/O lines provide control and status connections, while the 20 MHz operating rate permits responsive handling of limit switches, position signals, and operator commands. Because the MCU controls rather than directly drives most loads, external transistor or driver circuitry remains necessary. Firmware must also be sized around the 128-byte SRAM capacity.

⚡

Power Control and Energy Management

ATTINY261A-SU is suitable for supervisory power-control boards that coordinate enable signals, monitor digital status, and implement startup sequences. Its low-resource AVR architecture is useful when the system needs deterministic local control rather than high-volume data processing. The timer/counter resources can measure timing windows or generate periodic control pulses, and the 16 I/O lines can connect to supervisory logic such as power-good signals and mode selects. Use the manufacturer electrical tables to choose clock and power-management settings for low-power operation, particularly when standby current contributes materially to the system budget.

📱

Consumer Accessory Control

The ATTINY261A-SU works well in a small consumer accessory that combines buttons, LEDs, a simple sensor, and a serial configuration interface. Its 16 I/O lines accommodate human-interface inputs and status outputs, while 2 KB of In-System Programmable Flash supports a compact state machine and calibration routine. The Universal Serial Interface may handle a simple host or peripheral connection, and EEPROM can preserve settings between power cycles. For battery-powered accessories, select the active, idle, and shutdown modes from the manufacturer electrical characteristics so the design meets its standby-current objective.

🌐

Embedded Communication Gateway Module

ATTINY261A-SU can support a protocol-conversion or command-routing module when the required interface set is deliberately limited. The Universal Serial Interface provides a resource for serial link management, while 16 I/O lines can handle routing signals, mode indicators, and handshake controls. The 20 MHz clock is sufficient for lightweight command processing, and the 128-byte EEPROM can retain configuration values. This application has a tight boundary: the controller is best for small frame translators or supervisory bridges, not protocol stacks requiring substantial buffers, high-speed parallel data movement, or large lookup tables.

کورتەی بەرهەمە پێشنیارکراوەکان

ATTINY261A-SU Microchip Technology بەکارهێنراوە لە: Compact Sensor Interface Controller, LED Dimming and Lighting Control, Small Motor and Actuator Control, Power Control and Energy Management, Consumer Accessory Control, Embedded Communication Gateway Module ATTINY261A ATtiny261A family device used for the same 2 KB control class بەکارهێنراوە لە: Compact Sensor Interface Controller, Small Motor and Actuator Control, Consumer Accessory Control, Embedded Communication Gateway Module ATTINY261 Legacy 2 KB AVR control alternative for compatible legacy boards بەکارهێنراوە لە: LED Dimming and Lighting Control, Power Control and Energy Management
What are the key specifications of ATTINY261A-SU that engineers should know?
The ATTINY261A-SU is a 20 MHz, 8-bit AVR RISC microcontroller with 2 KB of In-System Programmable Flash, 128 bytes of EEPROM, 128 bytes of SRAM, and 16 general-purpose I/O lines. According to the Microchip Technology ATtiny261A product page, the device also provides 32 general-purpose working registers, an 8-bit timer/counter with compare modes, an 8-bit high-speed timer/counter, and a Universal Serial Interface. It is packaged in a 20-pin SOIC and supports 2.5 V, 3.3 V, and 5 V operation.
Where can I download the ATTINY261A-SU datasheet PDF?
The ATTINY261A-SU datasheet PDF is available from Microchip Technology through the ATtiny261A product page and through the listed manufacturer-linked PDF. The document covers the ATtiny261A/461A/861A family, including memory organization, timer and counter operation, the Universal Serial Interface, electrical characteristics, programming, and package information. Use the Microchip product page as the primary starting point so the device documentation remains aligned with the current manufacturer publication.
Where can I find the ATTINY261A-SU pinout?
The ATTINY261A-SU pinout is shown in the ATtiny261A/461A/861A manufacturer datasheet and its pin-description tables. The device is a 20-pin SOIC, and its pins include power, ground, programming interface, reset, I/O, and peripheral functions according to the exact variant. Use the pin-description table when assigning PCB nets because port functions can have alternate peripheral roles, and use the package drawing to verify counter-clockwise numbering and physical orientation.
How much Flash, SRAM, and EEPROM does the ATTINY261A-SU have?
The ATTINY261A-SU contains 2 KB of Flash, 128 bytes of SRAM, and 128 bytes of EEPROM. According to the Microchip Technology product description, its 2 KB of In-System Programmable Flash is organized as 1K x 16. The limited SRAM makes stack depth and runtime buffer sizing important, while EEPROM can retain parameters or calibration values when nonvolatile storage is required. These capacities place the controller in the small-system class rather than the higher-memory ATtiny261A family options.
What is the maximum clock frequency of ATTINY261A-SU?
The ATTINY261A-SU has a maximum clock frequency of 20 MHz. The DigiKey product listing identifies the part as an 8-bit AVR microcontroller operating at 20 MHz with 2 KB of Flash, while the Microchip family documentation describes the high-performance picoPower AVR architecture. Actual control-loop timing still depends on clock configuration, peripheral prescaling, interrupt latency, and the instruction mix in the firmware, so timing-critical designs should be evaluated against the manufacturer timing specifications.
Can ATTINY261A-SU be used for low-power embedded control?
Yes, the ATTINY261A-SU is suitable for compact embedded-control designs that fit within its 2 KB Flash and 128-byte SRAM limits. Its 20 MHz maximum clock rate supports responsive digital control, and the family documentation identifies internal low-power resources for battery-oriented designs. The specific current draw depends on operating mode, clock frequency, active peripherals, I/O loading, and supply voltage. Select operating modes from the electrical-characteristics tables in the manufacturer datasheet before finalizing a battery-life calculation.
ATTINY261A-SU vs ATTINY261 - which one should I choose?
Choose ATTINY261A-SU for a new 2 KB Flash design when its current electrical characteristics and production status align with the application. Microchip’s AVR531 migration application note states that ATTINY261A/461A/861A devices are functionally identical, drop-in replacements for the corresponding earlier ATtiny261/461/861 devices, but they use a different manufacturing process and some electrical characteristics differ. Review timing, power, and characterization requirements before substituting between revisions.
When should I choose ATTINY261A-SU over ATTINY261?
Choose ATTINY261A-SU when starting a new design or when the current ATtiny261A family documentation provides the required production, quality, and lifecycle coverage. The older ATTINY261 may suit an unchanged legacy design, while ATTINY261A-SU represents the newer A-family device with 2 KB Flash and 128-byte memory resources. Because Microchip notes that some electrical characteristics changed with the manufacturing process, perform a complete timing, power-consumption, and application-level validation before migrating an operating production circuit.
Is ATTINY261A-SU suitable for sensor and actuator control?
Yes, ATTINY261A-SU is well suited to small sensor-and-actuator controller boards. Its 16 general-purpose I/O lines can support digital inputs, outputs, and multiplexed peripheral functions, while the two timer/counter sections support timing and pulse-generation tasks. The Universal Serial Interface can assist with simple serial sensor or peripheral connections. The 128-byte SRAM limit and 2 KB Flash capacity require disciplined firmware sizing, so complex protocol stacks or large data buffers may exceed the device’s practical resources.
What is the best drop-in replacement for ATTINY261A-SU?
The clearest documented drop-in migration path is from the original ATtiny261 to ATTINY261A, as stated in Microchip’s AVR531 migration application note. For ATTINY261A-SU specifically, a separate exact replacement should be selected only after confirming the 20-pin SOIC footprint, 2 KB Flash capacity, 128-byte SRAM, 128-byte EEPROM, clock configuration, pin functions, and application qualification requirements. Use the Request a Quote form on this page to request sourcing help for an exact replacement.
What can replace ATTINY261A-SU without changing the PCB?
A PCB-compatible replacement must retain the 20-pin SOIC footprint, pin assignment, power pins, programming interface, clock behavior, memory capacities, and peripheral functions of ATTINY261A-SU. The documented ATtiny261A family relationship supports migration from the earlier ATtiny261, but that does not establish that every related AVR device is interchangeable. The Request a Quote form on this page can be used to identify an exact-source component after the required electrical, firmware, and qualification criteria are defined.
Is ATTINY261A-SU the same as an ATtiny261A-SU from another supplier?
The manufacturer prefix identifies Microchip Technology as the source of the ATTINY261A-SU, while the suffix encodes the device configuration and 20-pin SOIC tube packaging. Parts with the same commercial ordering code should identify the same Microchip device, but authorization status and traceability should still be confirmed during procurement. Use the Request a Quote form on this page to request manufacturer-source details and availability rather than relying only on an unverified marketplace label.
Is there a verified cross-brand drop-in equivalent for ATTINY261A-SU?
No verified cross-brand, pin-to-pin drop-in equivalent was identified for the ATTINY261A-SU. Cross-manufacturer equivalence requires more than a similar clock rate or memory size because AVR instruction behavior, interrupt vectors, timer registers, Universal Serial Interface behavior, programming signals, and peripheral pin assignments must also match. An alternative in the same 20-pin SOIC package should therefore be treated as a redesign candidate unless its documentation explicitly confirms compatibility. Submit the required operating conditions through the Request a Quote form for a controlled sourcing review.
Where can I buy ATTINY261A-SU online?
ATTINY261A-SU can be requested through the Request a Quote form on this page. The form is the appropriate channel for confirming current availability, manufacturer traceability, packaging form, order quantity, and delivery timing without inserting a volatile price into the technical page. For production qualification, request documentation associated with the exact ATTINY261A-SU ordering code and confirm that the supplied configuration matches the 20-pin SOIC tube package used by the design.
What is the lead time for ATTINY261A-SU?
Current lead time for ATTINY261A-SU should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing schedule, packaging format, quality requirements, and allocation conditions. For a new production release, request a delivery schedule that also includes buffer stock for the exact 20-pin SOIC tube configuration. The ATTINY261A-SU suffix identifies a tube-packed Microchip device, so the procurement response should confirm that packaging rather than substituting another form factor.
What is the price and stock status of ATTINY261A-SU?
The current price and stock status of ATTINY261A-SU should be obtained through the Request a Quote form on this page. The form provides a single procurement channel for a response tied to quantity, packaging, traceability, and delivery requirements. Buyers should provide the planned annual usage and required tube quantity so the commercial response can reflect the appropriate supply configuration. Technical decisions can continue using the documented 20 MHz clock, 2 KB Flash, and 20-pin SOIC configuration.

داتای سەرچاوەی ئەندازیاری بۆ ATTINY261A-SU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Select ATTINY261A-SU for a new compact control design that needs an 8-bit AVR processor at up to 20 MHz, 2 KB of Flash, 128 bytes of SRAM, 128 bytes of EEPROM, and 16 I/O lines in a 20-pin SOIC tube package. It is well matched to LED sequencing, small actuator supervision, sensor nodes, and lightweight serial-control modules where firmware size must remain modest. ATTINY261 is primarily relevant for legacy-board migration because Microchip identifies the A-family device as functionally identical and drop-in compatible, although some electrical characteristics changed with the manufacturing process. Do not select a cross-brand 8-bit or 20-pin MCU solely from its clock rate and memory capacity; require explicit confirmation of pin functions, programming, interrupt behavior, timers, serial peripherals, and qualification. For new production designs, also consider whether 2 KB of Flash and 128 bytes of SRAM provide enough margin for the complete application and its planned feature growth.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ATTINY261
Package 20-pin SOIC 20-pin SOIC
Brand Microchip Technology Microchip Technology
Maximum Clock Frequency 20 MHz 20 MHz
Flash Memory 2 KB 2 KB
EEPROM 128 bytes 128 bytes
SRAM 128 bytes 128 bytes
General-Purpose I/O 16 lines 16 lines
General-Purpose Registers 32 registers 32 registers
Timer Resources 8-bit timer/counter and 8-bit high-speed timer/counter 8-bit timer/counter and 8-bit high-speed timer/counter
Manufacturing Process ATtiny261A-family process Earlier process; some electrical characteristics differ

جیاکەرەوە سەرەکییەکان

  • Documented functional migration from the earlier ATtiny261 (بەراورد بەATTINY261)
  • Full ATtiny261A product-page support for the 2 KB configuration (بەراورد بەATTINY261)
  • Compact 20-pin SOIC integration (بەراورد بەATTINY261)

تێبینییەکانی دیزاین

Use the 20-pin SOIC land pattern associated with the ATTINY261A package drawing and verify pin 1 orientation against the PCB silkscreen and manufacturer pin description. Keep the decoupling capacitor path between the supply and ground pins short, with a low-impedance ground return. Because the SOIC lead pitch is fine, inspect the assembled board under magnification for solder bridges, insufficient wetting, and solder wicking onto adjacent pins.

Select the operating clock and supply combination from the manufacturer electrical-characteristics tables, and include the external decoupling network required by the device. The controller supports 2.5 V, 3.3 V, and 5 V operation, but maximum current, sleep current, and startup behavior are separate specifications. For battery designs, estimate average current from processor active time, peripheral activity, and I/O loading rather than assuming the lowest mode current applies continuously.

Do not treat the documented functional equivalence between the original ATtiny261 and ATTINY261A as proof that every electrical characteristic is unchanged. Microchip’s AVR531 migration note states that the devices use different manufacturing processes and that some electrical characteristics differ. Revalidate timing margins, power measurements, reset behavior, and any application-specific qualification before releasing the A-family device into a production circuit.

Keep programming-interface signals accessible and isolate sensitive analog or timing-sensitive nodes from high-current switching paths. The Universal Serial Interface and timer outputs can use ordinary GPIO routing, but edge-sensitive functions should be kept away from switching-node copper and noisy power paths. Review alternate-function assignments in the pin-description table before finalizing net names; several I/O pins can serve more than one peripheral function.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The ATTINY261A-SU listing identifies the device as RoHS compliant. No automotive qualification, REACH status, lead-free classification, halogen-free classification, or conflict-minerals declaration was identified for this exact ordering code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-14 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

attiny261a su datasheet attiny261a datasheet attiny261a pinout ATTINY261A-SU datasheet pdf ATTINY261A-SU pinout ATTINY261A-SU 20MHz specifications ATTINY261A-SU 2KB Flash ATTINY261A-SU equivalent ATTINY261A-SU replacement ATTINY261A-SU vs ATTINY261 Microchip ATTINY261A-SU ATTINY261A-SU price ATTINY261A-SU stock ATTINY261A 20-pin SOIC ATTINY261A LED control application

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology ATTINY261A-SU ATTINY261A ATTINY261 AVR 8-bit AVR RISC microcontroller MCU embedded microcontroller semiconductor In-System Programmable Flash Universal Serial Interface timer/counter 20-pin SOIC SOIC package family surface-mount package 20 MHz 2 KB Flash 128-byte SRAM 128-byte EEPROM 16 general-purpose I/O lines picoPower LED control sensor interface industrial control
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ