Microchip Technology

ATTINY427-MU - 20MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATTINY427-MU ✓ چالاک
24-pin VQFN Package 20 MHz Speed 4 KB Memory
MOQ: 1 |

ATTINY427-MU گشتی

The Microchip Technology ATTINY427-MU is an 8-bit AVR tinyAVR 2 microcontroller with a 20 MHz maximum clock, 4 KB Flash memory, 512 B SRAM, and 128 B EEPROM in a 24-pin VQFN package measuring 4 x 4 mm. The device includes an AVR CPU with a hardware multiplier and uses Microchip's Core Independent Peripherals architecture.

A microcontroller is a programmable integrated circuit that combines a processor core, memory, and dedicated peripherals on one semiconductor die. The ATtiny427 belongs to the hierarchy of 8-bit MCU > tinyAVR microcontroller > AVR architecture > embedded controller > semiconductor. Its compact package and low-memory architecture suit embedded control, sensing, communications, and automation products where the application requires deterministic peripheral handling without a high-power application processor.

The ATTINY427-MU's headline characteristics are its 20 MHz operating speed, 4 KB program Flash, and 24-pin 4 x 4 mm VQFN package. The AVR CPU includes a hardware multiplier, allowing supported multiply operations to execute more efficiently than software-emulated multiplication. Event System support and Core Independent Peripherals help offload timing, signal-generation, and data-acquisition tasks from the CPU.

Microchip's ATtiny424, ATtiny426, ATtiny427, ATtiny824, ATtiny826, and ATtiny827 family shares a flexible, low-power architecture. The ATtiny427 specifically combines 4 KB Flash with 512 B SRAM and 128 B EEPROM. Because these resources are modest, firmware should avoid unnecessary library duplication and large buffering structures, while event-driven design can improve responsiveness and energy efficiency.

Typical uses include compact industrial controllers, digital measurement equipment, low-speed communication nodes, smart sensors, LED-control systems, and small motor-control or actuator-control products. The 4 x 4 mm VQFN footprint supports compact PCB designs, although its fine pitch requires careful land-pattern assembly and adequate exposed-pad thermal management.

When laying out a board, place decoupling capacitance at each supply pin and preserve the manufacturer's recommended VQFN footprint, solder-mask, and exposed-pad geometry. Confirm all peripheral pin multiplexing against the ATtiny424/426/427/824/826/827 datasheet before finalizing routing, because alternate-function signals can constrain board-level connectivity.

This product page combines the manufacturer device specifications, package and memory details, application guidance, and verified drop-in replacement review. It also provides engineering-focused comparison and design notes intended to clarify board reuse, firmware constraints, and device-selection trade-offs.

جێگرەوەکانی جێگۆڕکێ بۆ ATTINY427-MU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY427-MU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, SRAM, EEPROM, CPU Architecture, ADC Resolution.

Microchip Technology
Product Type: 8-bit AVR tinyAVR 2 microcontroller
SRAM: 512 bytes
EEPROM: 128 bytes
بەراوردکردن لەگەڵ ATTINY427-MU →
Microchip Technology
Product Type: 8-bit tinyAVR 2-series microcontroller
SRAM: 1 KB
EEPROM: 128 bytes
بەراوردکردن لەگەڵ ATTINY427-MU →
Microchip Technology
EEPROM: 128 bytes
CPU Architecture: 8-bit AVR with hardware multiplier
بەراوردکردن لەگەڵ ATTINY427-MU →

ATTINY827-MU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 VQFN-24 (HVQCCN)
tinyAVR 2 series · 8-bit AVR with hardware multiplier · 20 MHz · 10 MHz · 5 MHz · 8 KB · 1 KB · 128 bytes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATTINY427-MU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit microcontroller
Architecture AVR
Series tinyAVR 2
زۆرترین فرێکوێنسیی کاتژمێر 20 MHz
Flash Memory 4 KB
Program Memory Organization 4K x 8 bits
SRAM 512 B
EEPROM 128 B
CPU Multiplier Hardware multiplier
Peripheral Architecture Core Independent Peripherals
Package Type 24-pin VQFN
Package Dimensions 4 x 4 mm
ژمارەی پین 24 pins
Industrial Temperature Grade 85 C
Green Compliance Green

ڕێنمایی ڕێکخستنی پینی ATTINY427-MU 4 x 4 mm

ڕێکخستنی پین بۆ ATTINY427-MU (پاکێجی 4 x 4 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 4 x 4 mm بۆ ATTINY427-MU

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATTINY427-MU.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ATTINY427-MU گونجاوە بۆ 6 بەکارھێنانs: Compact Industrial Sensor Node, Digital Panel and LED Control, Low-Speed Communications Node, Precision Timer and Event Controller, Battery-Powered Measurement Module, Compact Actuator Controller.

🏭

Compact Industrial Sensor Node

The ATTINY427-MU fits a compact sensor node that samples low-rate physical signals, applies calibration, and formats results for a serial or digital interface. Its 20 MHz AVR core provides useful processing headroom, while 512 B SRAM supports small state machines and 128 B EEPROM can retain configuration parameters between power cycles. The 24-pin 4 x 4 mm VQFN also reduces board area. Designers should use streaming acquisition rather than large sample buffers and verify the required ADC, timer, and communication peripherals in Microchip datasheet DS40002311A.

💡

Digital Panel and LED Control

The ATTINY427-MU can control status indicators, button inputs, relays, or small LED arrays in a space-limited panel. Its 20 MHz clock supports responsive debouncing and timing, while the AVR hardware multiplier accelerates supported multiply operations for display or intensity calculations. The 4 KB Flash constrains complex graphical features, making this device better suited to discrete status control than elaborate menu systems. Firmware should use event-driven input handling, and the board should provide clean ground returns and suitable drive transistors for inductive or high-current LED loads.

🌐

Low-Speed Communications Node

The ATTINY427-MU is appropriate for a low-speed communications endpoint that collects commands, performs local control, and forwards compact status data. Its 8-bit AVR architecture and 20 MHz maximum clock suit protocol handling at modest baud rates, while 512 B SRAM accommodates packet buffers when designed carefully. The device should not be selected for high-throughput protocols or large protocol stacks. Validate pin multiplexing for the intended UART, SPI, or other interface and reserve memory for the stack, interrupt handlers, and application logic before final firmware allocation.

⏱️

Precision Timer and Event Controller

The ATTINY427-MU can act as a compact timer or event controller because the tinyAVR 2 architecture combines an AVR core with Core Independent Peripherals and an Event System. The peripherals can perform predictable timing, signal-generation, and data-handling tasks while the CPU manages application-level logic, improving responsiveness in event-driven systems. The 4 x 4 mm VQFN footprint supports compact instrument or automation modules. Engineers should map every required event route and peripheral output in the device documentation rather than implementing critical timing loops solely in software.

🔋

Battery-Powered Measurement Module

The ATTINY427-MU can serve as the control core of a battery-powered measurement module when the application fits within 4 KB Flash, 512 B SRAM, and 128 B EEPROM. Its configurable low-power architecture permits duty-cycled measurement and sleep-based operation, while the compact VQFN reduces board volume. Energy calculations should include sensor standby current, regulator quiescent current, MCU sleep current, and wake-up interval rather than using a single operating-current figure. The exact low-power current and wake-up behavior must be taken from the electrical-characteristics and power-management sections of DS40002311A.

🔧

Compact Actuator Controller

The ATTINY427-MU can manage small actuators, valves, or discrete outputs in compact equipment where board area is limited. Its 20 MHz AVR core handles sequencing, state management, and timing, while Core Independent Peripherals can support deterministic peripheral operations. The device does not directly replace protected power-stage electronics, so designers must add suitable drivers, isolation, and protection based on the load. Confirm the exact I/O count, voltage limits, and alternate-function assignments in the 24-pin pin table before assigning outputs, and keep high-current paths away from sensitive control circuitry.

کورتەی بەرهەمە پێشنیارکراوەکان

ATtiny424 Related tinyAVR 2 family member for compact embedded sensing بەکارهێنراوە لە: Compact Industrial Sensor Node, Digital Panel and LED Control, Precision Timer and Event Controller, Compact Actuator Controller ATtiny426 Related tinyAVR 2 family member with integrated analog functions بەکارهێنراوە لە: Compact Industrial Sensor Node, Low-Speed Communications Node, Battery-Powered Measurement Module ATtiny824 Related family member with greater memory for expanded control logic بەکارهێنراوە لە: Digital Panel and LED Control, Precision Timer and Event Controller, Compact Actuator Controller ATtiny826 Related family member offering greater memory for larger protocol stacks بەکارهێنراوە لە: Low-Speed Communications Node, Battery-Powered Measurement Module
What is the ATTINY427-MU?
The ATTINY427-MU is a Microchip Technology 8-bit AVR tinyAVR 2 microcontroller rated up to 20 MHz, with 4 KB Flash, 512 B SRAM, and 128 B EEPROM. According to the Microchip ATtiny424/426/427/824/826/827 datasheet DS40002311A, the device uses an AVR CPU with a hardware multiplier and Core Independent Peripherals. It is packaged in a compact 24-pin VQFN measuring 4 x 4 mm for space-constrained embedded-control designs.
What is the operating voltage of ATTINY427-MU?
The exact ATTINY427-MU supply-voltage range must be confirmed from the device's electrical-characteristics table in Microchip datasheet DS40002311A before the circuit is released. The manufacturer describes the ATtiny427 as a tinyAVR 2 device using the AVR CPU with a hardware multiplier and operating up to 20 MHz. Review the voltage-versus-frequency limits and peripheral operating conditions when selecting regulators, decoupling, and external interface levels for the design.
What are the key specifications of ATTINY427-MU that engineers should know?
The key ATTINY427-MU specifications are a 20 MHz maximum clock, 4 KB Flash, 512 B SRAM, 128 B EEPROM, an 8-bit AVR CPU with a hardware multiplier, and a 24-pin 4 x 4 mm VQFN package. Microchip datasheet DS40002311A also identifies the family's Core Independent Peripherals and Event System technologies. These figures position the device for compact embedded-control, timing, sensing, and communications tasks rather than memory-intensive applications.
Where can I download the ATTINY427-MU datasheet PDF?
The official ATTINY427 family datasheet is available from Microchip's manufacturer download URL for document DS40002311A. It covers the ATtiny424, ATtiny426, ATtiny427, ATtiny824, ATtiny826, and ATtiny827 devices, including package information, memory organization, peripherals, electrical characteristics, and pin definitions. Use the manufacturer's PDF for production design decisions because package drawings and multiplexed pin functions must be interpreted together.
Where can I find the ATTINY427-MU pinout?
The ATTINY427-MU pinout is found in the pin-description and package-drawing sections of Microchip datasheet DS40002311A. The device has 24 pins in a 4 x 4 mm VQFN package, but pin functions can vary with alternate peripheral assignments, reset configuration, and programming mode. Use the datasheet's pin table to assign power, ground, reset, programming, clock, and communication functions before routing the PCB.
What can replace ATTINY427-MU?
No verified cross-manufacturer, pin-compatible drop-in replacement for the ATTINY427-MU was identified in the reviewed cross-reference material. A replacement must use the same 24-pin VQFN footprint, match the 20 MHz operating class, provide at least 4 KB Flash and 512 B SRAM, and preserve the required AVR peripheral functions and programming interface. Same-family devices can offer related capabilities, but selecting one requires a pin-by-pin and peripheral-level review rather than an assumption of interchangeability.
Is ATTINY427-MU suitable for a compact sensor node?
Yes, the ATTINY427-MU is suitable for many compact sensor-node functions because it combines an 8-bit AVR core, 4 KB Flash, 512 B SRAM, 128 B EEPROM, and event-driven Core Independent Peripherals in a 4 x 4 mm VQFN. Its 512 B SRAM limits simultaneous buffering, so acquisition firmware should use compact buffers or streaming methods. The final design must also confirm the required ADC, timer, communication, and I/O capabilities in datasheet DS40002311A.
ATTINY427-MU vs ATtiny424: which is better for a new design?
The ATtiny427 should be preferred over the ATtiny424 when a design specifically requires the ATtiny427's 4 KB Flash, 512 B SRAM, and 128 B EEPROM configuration. The ATtiny424 is a closely related tinyAVR 2 family member, but its available memory and package options must be checked before treating it as an interchangeability decision. Neither should be considered drop-in without confirming pin functions, peripheral assignments, clock limits, and memory requirements in DS40002311A.
When should I choose ATTINY427-MU over a larger 8-bit MCU?
Choose the ATTINY427-MU when a design fits within 4 KB Flash, 512 B SRAM, and 128 B EEPROM and benefits from its 24-pin 4 x 4 mm VQFN footprint. It is particularly attractive for compact, event-driven controls where Core Independent Peripherals can handle predictable peripheral tasks. Choose a larger MCU instead when firmware growth, RAM-heavy buffering, extensive I/O, or more demanding communication and analog functions exceed this device's resources.
Is ATTINY427-MU the same as ATTINY427?
The ATTINY427-MU is the orderable Microchip designation for the ATtiny427 device in the specified 24-pin VQFN configuration, while ATTINY427 is the family-level base name. Both refer to the same underlying device family, but the complete MPN determines the exact package and ordering configuration. Verify the package drawing, pin count, and ordering information when substituting a shortened ATtiny427 designation in a BOM.
What is the best NXP or ST equivalent for ATTINY427-MU?
No NXP or STMicroelectronics part was verified as a true drop-in replacement for the ATTINY427-MU. Cross-manufacturer MCU substitutions require more than a similar pin count: peripheral mappings, interrupt behavior, register compatibility, programming tools, voltage levels, and application firmware can all change. A practical replacement requires a deliberate board and firmware redesign or a manufacturer-supported migration path, not a footprint-only substitution.
How much power does ATTINY427-MU consume?
ATTINY427-MU power consumption depends on supply voltage, clock configuration, active peripherals, I/O loading, and the selected operating mode. The device's 20 MHz maximum clock identifies its performance capability but does not by itself define operating current. Use the active, idle, sleep, and power-down current tables in Microchip datasheet DS40002311A, then account for board-level regulator and leakage losses when calculating battery life.
What is the lifecycle status of ATTINY427-MU?
Microchip currently maintains an active product page for the ATtiny427, and current distributor listings identify the ATTINY427-MU ordering configuration. Treat the device as an active catalog component for initial design work, but obtain a written lifecycle and supply confirmation for long-lived production programs. Request current lot availability, minimum order quantity, and lead time through the Request a Quote form on this page before committing the part to a schedule.
Where can I buy ATTINY427-MU and check the lead time?
Use the Request a Quote form on this page to request current ATTINY427-MU availability, unit pricing, minimum order quantity, and lead time for the exact 24-pin VQFN ordering configuration. Because microcontroller supply can vary by date code, quantity, and authorized channel, these commercial terms should be confirmed when the purchase order is prepared. The manufacturer device page and datasheet remain the authoritative references for configuration and ordering details.
What is the price of ATTINY427-MU?
Current ATTINY427-MU pricing depends on order quantity, date code, and supply channel, so request a quote through the Request a Quote form on this page for the quantity and packaging required by your build. The platform's structured pricing fields update from current listings when qualifying quantity-break data is available. Review the returned commercial offer alongside your required schedule and ensure that the quoted suffix remains ATTINY427-MU rather than a different package option.
Is ATTINY427-MU in stock?
Inventory for ATTINY427-MU should be checked through the Request a Quote form on this page using the required quantity and target delivery date. A distributor listing can appear while exact suffix, date code, or regional inventory remains constrained. Provide the planned annual usage, prototype quantity, and production schedule in the request so the supplier can confirm the correct 24-pin VQFN configuration and a realistic replenishment lead time.

داتای سەرچاوەی ئەندازیاری بۆ ATTINY427-MU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ATTINY427-MU for compact embedded products that fit within 4 KB Flash, 512 B SRAM, and 128 B EEPROM and benefit from event-driven Core Independent Peripherals. Its 20 MHz AVR core is appropriate for moderate control, timing, sensing, and communications tasks, while the 24-pin 4 x 4 mm VQFN supports space-constrained boards. Choose a larger tinyAVR 2 member when firmware, RAM, EEPROM, I/O, or analog requirements exceed the ATtiny427 resources. Choose the ATtiny424 or ATtiny426 only after checking their exact memory, package, and pin-function differences; they are related family members, not automatically interchangeable. No verified cross-manufacturer drop-in substitute was found, so an NXP, STMicroelectronics, or other vendor MCU should be treated as a redesign unless the manufacturer explicitly documents package, peripheral, and software compatibility.

جیاکەرەوە سەرەکییەکان

  • Compact 24-pin VQFN implementation (بەراورد بەATtiny424)
  • Event-oriented peripheral architecture (بەراورد بەATtiny824)
  • Hardware-assisted multiply operation (بەراورد بەGeneric software-multiply implementation)

تێبینییەکانی دیزاین

Use the exact 24-pin VQFN land pattern, solder mask, and exposed-pad geometry specified by Microchip for the ATTINY427 package. Place the required bypass capacitors close to their associated supply pins and provide a low-impedance ground plane. Because this is a 4 x 4 mm fine-pitch package, assembly capability, solder paste volume, pad exposure, and reflow profile should be reviewed with the board assembler before production.

Finalize pin multiplexing only after reviewing all timer, communication, analog, and event-routing requirements. The ATtiny427 family can assign several functions to the same physical pins, and programming or reset requirements can further constrain the layout. Create a firmware-aware pin matrix, mark mandatory programming and clock connections, and avoid placing high-speed or switching nodes adjacent to sensitive analog inputs.

The device's 4 KB Flash, 512 B SRAM, and 128 B EEPROM require disciplined firmware allocation. Use compact buffers, avoid unnecessary library duplication, and reserve memory for interrupts and the chosen communication stack. For low-power designs, calculate average consumption from active and sleep durations multiplied by their respective currents, then add sensor, regulator, and leakage losses. Do not estimate battery life from maximum clock frequency alone.

Do not treat a device with a similar 24-pin footprint as a replacement without checking the pin table, exposed pad, voltage ratings, peripheral assignments, and programming workflow. The ATtiny427's 512 B SRAM can also be exhausted by oversized buffers or library use. Check map-file usage early, avoid allocating large structures dynamically, and leave margin for stack growth, interrupts, and future firmware changes.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The distributor listing identifies ATTINY427-MU as Green. No specific RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive-qualification statement was confirmed.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ATTINY427-MU datasheet ATTINY427-MU pinout ATTINY427-MU datasheet pdf ATTINY427-MU equivalent ATTINY427-MU replacement ATTINY427-MU cross reference ATTINY427-MU VQFN24 footprint ATTINY427-MU application circuit ATTINY427-MU price ATTINY427-MU stock Microchip ATTINY427-MU ATTINY427 20MHz 4KB Flash ATTINY427-MU vs ATtiny424 ATTINY427-MU VQFN24 pinout

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology ATTINY427-MU ATtiny427 ATtiny424 ATtiny426 ATtiny824 ATtiny826 AVR CPU tinyAVR 2 8-bit microcontroller embedded controller Core Independent Peripherals Event System hardware multiplier 20 MHz 4 KB Flash 512 B SRAM 128 B EEPROM 24-pin VQFN QFN package family surface mount SMD industrial temperature grade Green RoHS REACH
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ