ATTINY826-MU - 20MHz AVR MCU, 8KB Flash | Microchip
MPN: ATTINY826-MU ✓ چالاکATTINY826-MU گشتی
A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and peripherals on one device. The ATTINY826 belongs to the tinyAVR family within Microchip's broader 8-bit AVR architecture. The family hierarchy is tinyAVR 2 series microcontroller > 8-bit AVR microcontroller > microcontroller > embedded processor > semiconductor. Its compact package, event-driven peripherals, and hardware multiplier allow an embedded design to execute control logic without a separate processor or complex external interface circuitry.
Key features include the 20 MHz AVR CPU, 8 KB of program Flash, 1 KB of SRAM, and 128 bytes of nonvolatile EEPROM. The 12-bit ADC and 18 available I/O pins support typical sensor-reading, actuator-control, and digital-interface applications. Operating from 1.8 V to 5.5 V permits use in low-voltage equipment, while the -40 °C to +85 °C industrial temperature range supports operation across demanding ambient conditions.
The tinyAVR 2 architecture combines a hardware multiplier with flexible, low-power event systems. This combination benefits control loops that multiply values, count external events, or respond to peripheral activity without continuous CPU polling. The 128-byte EEPROM provides a small amount of persistent storage for calibration values, configuration data, or operating counters, although it is not intended for high-volume data logging.
Typical uses include compact industrial controllers, low-power sensor nodes, LED-control modules, appliance interfaces, and embedded timing or event-counting systems. The 20-pin VQFN footprint can support space-constrained boards, but its 3 x 3 mm dimensions require careful assembly planning and exposed-pad thermal management where applicable.
Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, and programming configuration in the manufacturer datasheet. The -MU suffix identifies the 20-pin VQFN package, so board layouts and PCB libraries should be matched to that package rather than the SSOP or SOIC versions of the ATtiny826.
This product page consolidates the verified electrical characteristics, package information, family-level alternatives, application guidance, and PCB-focused engineering notes. It also identifies the specific technical areas that must be checked in the manufacturer datasheet before schematic release, firmware development, PCB layout, or production procurement.
جێگرەوەکانی جێگۆڕکێ بۆ ATTINY826-MU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY826-MU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, SRAM, EEPROM, CPU Architecture, ADC Resolution.
ATTINY824-MU
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY827-MU
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ATTINY426-MU
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ATTINY427-MU
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ATTINY424-MU
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY826-MU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit tinyAVR 2-series microcontroller |
| CPU Architecture | AVR with hardware multiplier |
| Maximum CPU Frequency | 20 MHz |
| Program Flash Memory | 8 KB |
| SRAM | 1 KB |
| EEPROM | 128 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V |
| ADC Resolution | 12 bit |
| I/O Pin Count | 18 pins |
| Device Bit Width | 8 bit |
| پاکێج | 20-pin VQFN, 3 x 3 mm |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +85 °C |
| جۆری دامەزراندن | Surface mount |
| Product Family | tinyAVR 2 family |
| Family SRAM Options | 512 bytes or 1 KB |
| Family Flash Options | 4 KB or 8 KB |
| دۆخی RoHS | Compliant |
| Green Product | Yes |
ڕێنمایی ڕێکخستنی پینی ATTINY826-MU 20-pin vqfn, 3 x 3 mm
ڕێکخستنی پین بۆ ATTINY826-MU (پاکێجی 20-pin vqfn, 3 x 3 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATTINY826-MU.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ATTINY826-MU گونجاوە بۆ 6 بەکارھێنانs: Compact Industrial Control Module, Low-Power Sensor Node, LED Lighting Controller, Appliance User Interface Controller, Event Counter and Timing Module, Compact Data Acquisition Module.
Compact Industrial Control Module
The ATTINY826-MU fits compact industrial control modules that require local logic, digital inputs, and actuator outputs within a small board area. Its 20 MHz AVR core with a hardware multiplier executes control routines efficiently, while 8 KB of Flash and 1 KB of SRAM provide space for application code and working variables. The 18 I/O pins can handle switches, status indicators, relays, or discrete sensors without requiring a larger controller. For an industrial enclosure, operate the device within its -40 °C to +85 °C rating and follow the manufacturer power and decoupling guidance. The 3 x 3 mm VQFN package reduces board footprint, although assembly inspection and exposed-pad handling require a controlled process.
پێشنیارکراو
Low-Power Sensor Node
The ATTINY826-MU is appropriate for a low-power sensor node that must digitize measurements and process them locally. Its 12-bit ADC supports analog sensor inputs, while the 1.8 V to 5.5 V supply range allows operation from compact low-energy sources or regulated rails. The event-driven architecture described in the Microchip family datasheet can help firmware sleep between relevant events rather than polling continuously. With 1 KB of SRAM, the controller can hold recent samples and intermediate results, while 128 bytes of EEPROM is suitable for a small calibration record. Actual battery life depends on sensor duty cycle, ADC sampling rate, clock configuration, and the selected low-power mode.
پێشنیارکراو
LED Lighting Controller
The ATTINY826-MU can serve as the controller in a compact LED lighting module that sequences channels, applies timing, and responds to user inputs. The 20 MHz AVR core provides ample timing headroom for PWM generation and control-loop execution, while the hardware multiplier supports brightness calculations. Its 18 I/O pins allow multiple LED outputs and switch or sensor inputs to share the same package. The 1.8 V to 5.5 V operating range supports integration with common low-voltage lighting architectures. Designers should configure the relevant timer and PWM channels in firmware, provide appropriate drive-current protection for the LED path, and validate the VQFN land pattern before releasing the PCB artwork.
پێشنیارکراو
Appliance User Interface Controller
The ATTINY826-MU is well suited to appliance panels where a small controller manages buttons, indicators, and a limited set of sensors. Its 18 available I/O pins simplify direct connection to user inputs and panel outputs, and the 8 KB of Flash can hold a complete embedded control application. The 128-byte EEPROM can preserve basic settings such as calibration offsets or operating counters across power cycles. Because the package is only 3 x 3 mm, the controller can be placed beneath or beside a display assembly without dominating the PCB. The main design checks are debounce timing, LED current limits, supply sequencing, and reliable access to the programming and debug interface.
پێشنیارکراو
Event Counter and Timing Module
The ATTINY826-MU can implement an event counter, production-line interval timer, or compact test fixture controller. The AVR CPU includes a hardware multiplier and can operate up to 20 MHz, allowing the firmware to combine precise interval measurement with filtering and local decision logic. The tinyAVR 2 family's event-control capabilities make it practical to respond to external events through peripherals instead of relying entirely on main-loop polling. Its 128 bytes of EEPROM can retain a counter or threshold, although higher-volume event logging requires external nonvolatile storage. Use the appropriate timer input and I/O pin from the manufacturer pin-description table, and verify the maximum input frequency against the selected clock and peripheral configuration.
پێشنیارکراو
Compact Data Acquisition Module
The ATTINY826-MU supports a compact data-acquisition module that combines analog measurement with local filtering and digital output. The 12-bit ADC is matched to sensors that do not require higher-resolution conversion, and the 20 MHz core provides processing headroom for averaging, thresholding, and calibration calculations. Eight kilobytes of Flash accommodates application firmware, while 1 KB of SRAM provides working space for successive readings. An 18-pin VQFN allows the converter and interface circuitry to be placed close together on a small board. Designers should select external capacitors according to the manufacturer ADC guidance, account for input-source impedance, and keep analog routing away from switching nodes and high-current digital outputs.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATTINY826-MU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ATTINY824-MU | ATTINY827-MU | ATTINY426-MU | ATTINY427-MU | ATTINY424-MU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin VQFN, 3 x 3 mm | 20-pin VQFN, 3 x 3 mm | 20-pin VQFN, 3 x 3 mm | 20-pin VQFN, 3 x 3 mm | 20-pin VQFN, 3 x 3 mm | 20-pin VQFN, 3 x 3 mm |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB |
| SRAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 512 bytes |
| EEPROM | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
جیاکەرەوە سەرەکییەکان
- Higher memory capacity than ATTINY424-MU (بەراورد بەATTINY424-MU)
- 18-I/O configuration in a compact VQFN package (بەراورد بەATTINY824-MU)
- 20 MHz AVR core with hardware multiplier (بەراورد بەATTINY426-MU)
تێبینییەکانی دیزاین
Use the exact 20-pin VQFN land pattern and exposed-pad treatment from the Microchip package drawing. The package measures only 3 x 3 mm, so small placement errors can affect solderability or create an open pad connection. Place the device where an assembly process can inspect the fine-pitch leads, and define the thermal and electrical role of the exposed pad before release. Do not reuse an SSOP or SOIC footprint with the -MU ordering code.
Follow the manufacturer input-capacitor and decoupling recommendations when connecting the 1.8 V to 5.5 V supply. Keep the supply return path short and place the required capacitors close to their associated pins. Treat the exposed pad as part of both the electrical and thermal design, and verify that its net assignment complies with the package drawing. Brownout behavior and reset conditions should be tested across the intended supply range.
Separate analog ADC inputs and their reference routing from PWM, relay, and other switching outputs. Keep the ADC input path compact, use a quiet reference connection, and avoid routing high-current return paths beneath the sensitive analog section. The 18 available I/O pins should be assigned according to the manufacturer pin-description table rather than inferred from another package variant. Programming and debug access should also remain available on the production PCB.
Do not treat ATtiny826 and ATTINY826-MU as identical ordering options. The family name can refer to SSOP and SOIC packages, while -MU identifies the 20-pin VQFN configuration. Likewise, a same-package tinyAVR 2 family member may use different timer, event-system, ADC, or interrupt resources even when Flash and SRAM match. Review the device-selection table, pin descriptions, and firmware register definitions before approving a substitution.
زانیاری پابەندبوون
The product listing identifies the ATTINY826-MU as RoHS compliant and green. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement is shown for the exact MPN.