ATTINY826-MF - 20MHz 8-bit AVR MCU | Microchip Technology
MPN: ATTINY826-MF ✓ چالاکATTINY826-MF گشتی
A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and input/output ports onto one package. It belongs to the hierarchy of embedded processor, microcontroller, 8-bit MCU, and tinyAVR 2 series devices. Compared with a general-purpose processor, the ATTINY826-MF is optimized for standalone control tasks requiring deterministic peripheral access, modest program and data storage, and low board-area consumption.
The principal device characteristics are a 20 MHz maximum operating frequency, 8 KB of Flash program memory, 1 KB of SRAM, and 128 bytes of EEPROM. Microchip's ATTINY826 family also uses an AVR CPU with a hardware multiplier. The ATTINY826-MF ordering code specifies the compact 20-pin VQFN 3 x 3 mm package, while the broader ATTINY826 family is also offered in SSOP and SOIC packages.
The architecture integrates the AVR CPU, embedded Flash, SRAM, EEPROM, general-purpose I/O, and device-specific peripherals in a compact embedded-control platform. The 3 x 3 mm VQFN construction minimizes PCB footprint, but its exposed-pad thermal and layout requirements must be handled correctly. The 20-pin format also supports a higher pin count than smaller MCU packages, providing additional connections for power, ground, programming, reset, and application I/O.
Typical uses include compact sensor-hub controllers, building-automation endpoints, motor or relay-control modules, industrial condition-monitoring nodes, and low-cost consumer accessories. The 20 MHz clock provides additional processing margin for interrupt-driven control and protocol handling, while 8 KB Flash accommodates a focused firmware rather than a large operating system or complex graphical application.
A critical layout consideration is the VQFN exposed pad. Follow the manufacturer package drawing and land-pattern guidance when assigning the pad, vias, and surrounding copper. Confirm the complete pin table, programming interface, clock options, electrical limits, and decoupling requirements in the ATTINY826 datasheet before releasing a PCB or production firmware.
This product page consolidates the exact ATTINY826-MF package, memory, speed, application, and sourcing details into an engineering-focused reference. It also distinguishes confirmed family characteristics from parameters that require direct review of the manufacturer documentation, helping designers shorten component evaluation without weakening PCB or firmware validation.
جێگرەوەکانی جێگۆڕکێ بۆ ATTINY826-MF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY826-MF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەATTINY826-MF زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit AVR tinyAVR 2-series microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| SRAM | 1 KB |
| EEPROM | 128 bytes |
| CPU Core | AVR with hardware multiplier |
| Architecture | 8-bit |
| پاکێج | 20-pin VQFN, 3 x 3 mm |
| جۆری دامەزراندن | Surface mount |
| Industrial Temperature Range | -40 °C to +125 °C |
| Green Compliance | Green |
ڕێنمایی ڕێکخستنی پینی ATTINY826-MF 20-pin vqfn, 3 x 3 mm
ڕێکخستنی پین بۆ ATTINY826-MF (پاکێجی 20-pin vqfn, 3 x 3 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATTINY826-MF.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ATTINY826-MF گونجاوە بۆ 6 بەکارھێنانs: Compact Sensor Hub Controller, Building Automation Endpoint, Motor and Relay Control Module, Industrial Condition Monitoring, Low-Cost Consumer Accessory, Battery-Powered Data Logger.
Compact Sensor Hub Controller
The ATTINY826-MF fits compact sensor-hub designs that periodically acquire measurements, apply filtering or threshold logic, and report results through a serial interface. Its 20 MHz AVR core provides timing margin for interrupt-driven sampling, while 8 KB of Flash and 1 KB of SRAM support a focused embedded application without an external memory device. The 128-byte EEPROM can retain calibration offsets, device addresses, or configuration flags. Using the 20-pin VQFN 3 x 3 mm package also reduces board area, but the exposed pad must be connected according to the manufacturer land pattern. Decoupling capacitors should be placed close to the supply pins, and the programming interface must remain accessible for initial firmware loading.
پێشنیارکراو
Building Automation Endpoint
The ATTINY826-MF can serve as a low-cost building-automation endpoint for monitoring switches, controlling relays, or coordinating lighting and environmental equipment. The 8-bit architecture is appropriate for a finite-state control loop, and the hardware-multiplier AVR core adds arithmetic capability for simple calculations. Its 20 MHz operating rate supports responsive event handling, while the 1 KB SRAM and 8 KB Flash are best suited to embedded firmware rather than a hosted connectivity stack. The 20-pin VQFN outline supports dense assemblies, although exposed-pad vias, copper spreading, and local supply bypassing are essential for stable operation in multi-heat wall-mounted equipment.
پێشنیارکراو
Motor and Relay Control Module
The ATTINY826-MF is suitable for small motor-control or relay-control modules where a microcontroller must interpret inputs and sequence outputs. The 20 MHz clock gives adequate headroom for debouncing, timing, state-machine updates, and communication servicing, while the hardware-multiplier AVR core supports basic arithmetic within control routines. Its 8 KB Flash and 1 KB SRAM constrain the design to a dedicated control function rather than a complex user interface. The compact VQFN package leaves more board area for power conversion and protection circuitry. Place output-driver isolation and transient-protection components away from sensitive logic, and verify grounding so relay or motor currents do not disturb the regulator and microcontroller supply rails.
پێشنیارکراو
Industrial Condition Monitoring
The ATTINY826-MF can act as the local controller in an industrial condition-monitoring node that reads sensors, evaluates thresholds, and records or transmits fault information. Its 20 MHz maximum frequency supports responsive polling and interrupt-driven preprocessing, while 8 KB Flash is suitable for fixed monitoring logic and 128 bytes of EEPROM can hold a small set of retained parameters. The device's -40 °C to +125 °C rating supports industrial temperature objectives when the complete board is appropriately qualified. The 3 x 3 mm VQFN package aids compact sensor assemblies, but designers should follow the exposed-pad layout, provide stable filtering and bypassing, and isolate external sensor wiring from sensitive analog and digital paths.
پێشنیارکراو
Low-Cost Consumer Accessory
The ATTINY826-MF works well in a compact consumer accessory where the required behavior is simple, such as button handling, status indication, or a small sensor interface. The tinyAVR 2 architecture avoids the cost and area of a larger system while retaining an 8 KB Flash program area and 1 KB working memory. Its 20-pin VQFN package enables a small board with a restrained bill of materials. For a battery-powered design, treat the controller's operating current and sleep behavior as important architecture variables and confirm them in the ATTINY826 documentation. Keep sensitive sensor or radio sections away from the digital return path, and verify regulator startup behavior across every power state used by the accessory.
پێشنیارکراو
Battery-Powered Data Logger
The ATTINY826-MF can support a small battery-powered data logger that wakes periodically, samples a sensor, stores a compact record, and manages a low-power serial link. The 20 MHz AVR core allows sensor filtering and timestamp-related processing between wake events, while 128 bytes of EEPROM can retain configuration or a small record count. Its 8 KB Flash and 1 KB SRAM demand disciplined firmware design, making it best for fixed-format records rather than large local datasets. The small VQFN footprint helps reduce board area, but exposed-pad construction still requires adequate copper and thermal spreading. Confirm sleep-current, wake-up, and clock-source behavior in the manufacturer datasheet before calculating battery life.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATTINY826-MF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | Microchip Technology |
| Package | 20-pin VQFN, 3 x 3 mm |
| Maximum CPU Frequency | 20 MHz |
| CPU Architecture | 8-bit AVR |
| Flash Memory | 8 KB |
| SRAM | 1 KB |
| EEPROM | 128 bytes |
| CPU Multiplier | Hardware multiplier |
| Operating Temperature Range | -40 °C to +125 °C |
| Mounting Type | Surface mount |
جیاکەرەوە سەرەکییەکان
- Compact 20-pin VQFN implementation of the tinyAVR 2 family (بەراورد بەATTINY826-SU)
- 20 MHz AVR processing capability with a hardware multiplier (بەراورد بەLower-frequency 8-bit AVR alternatives)
- Balanced embedded memory in a space-constrained package (بەراورد بەSmaller low-pin-count 8-bit MCUs)
- Industrial temperature capability (بەراورد بەCommercial-temperature MCU variants)
تێبینییەکانی دیزاین
Use the ATTINY826 manufacturer VQFN drawing and land-pattern guidance as the controlling PCB reference. Confirm the exposed-pad dimensions, pad mapping, solder-mask clearance, and recommended via arrangement before routing. Keep the exposed pad connected to the appropriate ground plane unless the manufacturer specifies otherwise, and avoid placing tall components where they could interfere with assembly or rework.
Place the required input and output decoupling capacitors close to their associated supply pins, with the shortest practical return path to the ground reference. Validate capacitor voltage rating, effective capacitance, and DC-bias behavior against the frequency range in the final schematic. Review startup, reset, and power-supply sequencing requirements in the ATTINY826 family documentation before finalizing the rail design.
Do not substitute the ATTINY826-SU for the ATTINY826-MF on an existing board. The family offers several package options, but SSOP and SOIC variants require different footprints and pin assignments. Likewise, an ordering-code difference that changes only reel or tray handling is not an engineering substitute. For any proposed alternative, verify package drawing, pin table, memory, clock, peripherals, and programming interface.
Keep switching-regulator outputs, motor or relay drivers, and high-current return paths physically separated from sensitive control traces. Route clocks and programming signals away from noisy power stages, and provide a quiet ground reference for the MCU. The 3 x 3 mm VQFN footprint offers little routing escape space, so finalize pin assignment and component placement before routing sensitive signals.
Treat the VQFN exposed pad as both an electrical and thermal feature. Provide a land pattern and copper area consistent with the manufacturer package drawing, then use multiple vias where the recommended footprint permits. Since the MCU can dissipate power as its operating frequency and peripheral activity increase, check the final junction-temperature calculation with the actual board construction and ambient temperature rather than relying on package size alone.
زانیاری پابەندبوون
The distributor listing identifies ATTINY826-MF as a green product, but detailed RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the confirmed product information.