Broadcom

BCM89500BPBG - 7-Port BroadR-Reach Switch | Broadcom

MPN: BCM89500BPBG ✓ چالاک
QFP-176 square gull-wing surface-mount package Package
MOQ: 1 |

BCM89500BPBG گشتی

Broadcom BCM89500BPBG is a 7-port integrated BroadR-Reach automotive Ethernet switch with Multi-BR and Gigabit Ethernet PHY support, packaged in a surface-mount square QFP-176 gull-wing package. The device combines seven-port Ethernet switching with automotive physical-layer connectivity in one AEC-Q100-screened component.

An automotive Ethernet switch is a network interface IC that connects multiple vehicle-network nodes, coordinates Ethernet traffic, and provides physical-layer connectivity over automotive copper links. Within the product hierarchy, BCM89500BPBG belongs to the Ethernet transceiver and interface-controller class, combining an Ethernet switch, PHY functions, and BroadR-Reach support in an automotive network controller and processor IC.

The principal product characteristics are seven integrated ports, BroadR-Reach automotive Ethernet connectivity, Multi-BR and Gigabit Ethernet PHY capability, a square surface-mount package with gull-wing terminals, and an AEC-Q100 screening level. The package is identified as QFP-176, providing 176 terminals for the high-pin-count mixed-signal and automotive Ethernet interface implementation. A system designer can therefore consolidate several vehicle Ethernet links into a single dedicated switching component rather than treating every link as an unrelated physical-layer endpoint.

BCM89500BPBG is particularly relevant to vehicle network architectures that combine established Gigabit Ethernet links with automotive BroadR-Reach connectivity. Its seven-port organization supports centralized Ethernet aggregation for vehicle computers, infotainment systems, telemetry controllers, advanced driver-assistance electronics, and other ECUs connected through an automotive Ethernet backbone. The integrated PHY arrangement can simplify board partitioning while preserving distinct network ports for different vehicle subsystems.

A typical automotive installation routes twisted-pair automotive Ethernet connections from several ECUs into the switch, then connects the backbone or service network through the remaining Ethernet ports. Board implementation must account for controlled-impedance differential routing, connector and cable loss, automotive transient immunity, grounding, isolation strategy, and the thermal environment around the QFP-176 package. PHY configuration, internal testing, and network-management functions should be validated against the Broadcom documentation for the exact device revision.

The primary engineering trade-off is integration versus routing complexity. A seven-port integrated switch reduces the number of discrete Ethernet interface components and centralizes automotive network connectivity, but every external copper link still requires careful PCB layout and validation. Power, ground, clock, reset, management, and media-dependent interface connections must be implemented according to the device pin description table rather than inferred from another Broadcom Ethernet device.

This product page combines the verified Broadcom product identity, interface classification, seven-port BroadR-Reach architecture, package characteristics, and AEC-Q100 screening information into an application-focused design reference. It also distinguishes verified package and qualification facts from detailed electrical parameters that must be confirmed in the manufacturer datasheet before schematic release, PCB implementation, or production qualification.

جێگرەوەکانی جێگۆڕکێ بۆ BCM89500BPBG — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

BCM89500BPBG زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 7-Port Integrated BroadR-Reach Automotive Switch
Device Classification Ethernet Transceiver
Ethernet Interface Category Drivers, Receivers, and Transceivers
Integrated Port Count 7 ports
Automotive Ethernet Support BroadR-Reach
PHY Support Multi-BR and Gigabit Ethernet PHY
Package Type QFP-176 square gull-wing surface-mount package
Terminal Count 176 terminals
Package Shape Square
Terminal Form Gull wing
جۆری دامەزراندن Surface mount
Screening Level AEC-Q100
Supplier Order Designator BCM89500BPBG-ND

ڕێنمایی ڕێکخستنی پینی BCM89500BPBG square

ڕێکخستنی پین بۆ BCM89500BPBG (پاکێجی square). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی square بۆ BCM89500BPBG

هیچ داتای وردی پینئاوت بەردەست نییە بۆ BCM89500BPBG.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

BCM89500BPBG گونجاوە بۆ 6 بەکارھێنانs: Central Automotive Ethernet Backbone, Vehicle Infotainment Ethernet Aggregation, Advanced Driver-Assistance ECU Networking, Vehicle Telemetry and Gateway Interface, Body and Comfort Controller Hub, Electric Vehicle Platform Networking.

🚗

Central Automotive Ethernet Backbone

BCM89500BPBG fits a central vehicle-network switching block because it combines seven ports with BroadR-Reach, Multi-BR, and Gigabit Ethernet PHY support in one QFP-176 device. The switch can aggregate traffic from multiple ECUs while presenting a controlled Ethernet backbone to a gateway or central compute node. Using the manufacturer pin-description table and reference design keeps media routing, termination, clocking, and management interfaces aligned with the device architecture. The principal design benefit is reduced controller count; the corresponding trade-off is a demanding 176-terminal layout with multiple high-speed differential routing channels.

📺

Vehicle Infotainment Ethernet Aggregation

An infotainment head unit can use BCM89500BPBG to consolidate several vehicle Ethernet links into a switched internal network. The seven-port architecture supports a mixture of automotive BroadR-Reach and Multi-BR connectivity while Gigabit Ethernet PHY capability handles compatible links. This arrangement is useful when audio, navigation, display, connectivity, and vehicle-compute subsystems must exchange packets through a centralized Layer 2 fabric. Board implementation should preserve controlled-impedance differential routing and validate connector, cable, and ECU interoperability rather than assuming every automotive Ethernet segment has identical media characteristics.

📷

Advanced Driver-Assistance ECU Networking

BCM89500BPBG is applicable to an advanced driver-assistance electronic control unit that connects cameras, radar controllers, sensor fusion hardware, and vehicle computing nodes. Seven ports provide a practical means of organizing multiple automotive Ethernet links around one switching component, while the integrated PHY functions reduce the number of separate Ethernet interface devices. The design must still account for automotive electromagnetic immunity, ground and return paths, connector qualification, and synchronized startup. The manufacturer application and pin information should be used to confirm which media and diagnostic functions are assigned to each port.

🌐

Vehicle Telemetry and Gateway Interface

BCM89500BPBG can serve as the Ethernet aggregation element in a vehicle gateway that links diagnostic, telemetry, body, and domain-controller networks. Its seven-port BroadR-Reach architecture allows several physical links to terminate at one managed switching block, while Multi-BR and Gigabit Ethernet PHY support cover compatible network segments. This is especially relevant when a gateway must mediate traffic among controllers that use different automotive Ethernet media. Design teams should map the required link rates, auto-negotiation behavior, isolation boundaries, and network-management requirements to the manufacturer documentation before finalizing port assignments.

🏭

Body and Comfort Controller Hub

A body controller can use BCM89500BPBG to consolidate distributed door, lighting, climate, seat, and sensor-controller Ethernet connections. The seven-port switch provides a practical hub structure for a vehicle domain where several low- to medium-speed control nodes coexist with higher-bandwidth links. BroadR-Reach support makes the device relevant to automotive copper-pair networks rather than office-oriented Ethernet only. The board should use automotive-grade passive components and validate grounding, transient protection, and cable lengths against the target vehicle electrical environment.

⚡

Electric Vehicle Platform Networking

BCM89500BPBG fits an electric-vehicle platform controller that connects battery-management, charging, inverter, thermal-management, and vehicle-compute domains over automotive Ethernet. Seven ports allow a domain controller to organize multiple network segments while retaining a centralized switching point for traffic. Its AEC-Q100 screening level supports automotive qualification planning, although system-level qualification remains necessary. Engineers should review power-loss behavior, startup sequencing, fault containment, thermal performance, and cable connectivity before releasing a high-voltage-adjacent electronic control unit.

What is BCM89500BPBG?
Broadcom BCM89500BPBG is a 7-port integrated BroadR-Reach automotive Ethernet switch with Multi-BR and Gigabit Ethernet PHY capability. The manufacturer product information identifies it as an automotive Ethernet network interface and switching IC in a QFP-176 surface-mount package. It is intended for centralized vehicle-network connectivity where several automotive Ethernet links must terminate in one switching device.
How many Ethernet ports does BCM89500BPBG provide?
BCM89500BPBG provides seven integrated Ethernet ports. According to the Broadcom product listing, the device is a 7-port integrated BroadR-Reach automotive switch with Multi-BR and Gigabit Ethernet PHY support. The seven-port arrangement is the key system-level feature because it allows multiple vehicle-network nodes to connect through one automotive Ethernet switching component.
What package is BCM89500BPBG available in?
BCM89500BPBG is supplied in a square QFP-176 package with 176 gull-wing terminals and surface mounting. The package information also identifies an AEC-Q100 screening level. Because this is a high-pin-count mixed-signal interface device, use the manufacturer pin-description table and land-pattern drawing for the exact ordering code when assigning tracks and vias.
Where can I download the BCM89500BPBG datasheet PDF?
The BCM89500BPBG datasheet PDF can be accessed through the Broadcom-hosted document entry on Datasheets.com or the linked datasheet result on Octopart. Use the manufacturer datasheet for final pin assignments, electrical limits, timing, initialization, PHY configuration, and package drawings. The dedicated datasheet intent search should be used rather than relying on a distributor category page for design details.
Where can I find the BCM89500BPBG pinout?
The BCM89500BPBG pinout is documented through the manufacturer pin-description table and the QFP-176 package drawing associated with the exact BCM89500BPBG device. The package has 176 gull-wing terminals, but their electrical names must be taken from the datasheet because signal, power, ground, test, and no-connect assignments cannot be inferred safely from the package geometry alone.
What are the key specifications of BCM89500BPBG that engineers should know?
The key BCM89500BPBG specifications are seven integrated ports, BroadR-Reach automotive Ethernet support, Multi-BR and Gigabit Ethernet PHY capability, a QFP-176 square gull-wing surface-mount package, 176 terminals, and an AEC-Q100 screening level. These characteristics position the device as a centralized automotive Ethernet switch rather than a general-purpose desktop Ethernet controller.
Is BCM89500BPBG suitable for automotive Ethernet networks?
BCM89500BPBG is suitable for automotive Ethernet networks that require BroadR-Reach connectivity and centralized seven-port switching. Its Broadcom product information identifies BroadR-Reach support, Multi-BR and Gigabit Ethernet PHY functions, and an AEC-Q100 screening level. Final suitability also depends on the individual media, connector, power, transient-immunity, and environmental requirements of the target vehicle platform.
What can replace BCM89500BPBG?
No pin-to-pin BCM89500BPBG replacement can be confirmed from the available component cross-reference results. A valid replacement must use the same QFP-176 footprint, preserve all 176 electrical assignments, support seven automotive Ethernet ports, and provide compatible BroadR-Reach and Multi-BR or Gigabit Ethernet PHY behavior. Do not treat a generic Ethernet switch as a drop-in substitute.
Is BCM89500BPBG the same as another Broadcom Ethernet switch?
BCM89500BPBG is not interchangeable merely because another Broadcom device is also an Ethernet switch. The distinguishing identity of BCM89500BPBG is its seven-port integrated BroadR-Reach architecture, Multi-BR and Gigabit Ethernet PHY support, QFP-176 package, and AEC-Q100 screening level. Verify the complete pin and PHY requirements before considering another family member.
When should I choose BCM89500BPBG for an automotive ECU?
Choose BCM89500BPBG when an automotive ECU must consolidate seven vehicle Ethernet links into one switching device and needs BroadR-Reach or Multi-BR automotive connectivity. It is less suitable when the design requires fewer ports, a different media interface, fewer package terminals, or a function outside the device’s verified switching and PHY capabilities. The board area and high-speed layout effort should also be weighed.
Where to buy BCM89500BPBG online?
BCM89500BPBG can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current availability, lot-specific packaging, lead time, and purchasing quantity. Because automotive inventory and traceability can vary by lot, provide the required quantity, date code, and delivery destination when requesting the quotation.
What is the price of BCM89500BPBG?
The current price of BCM89500BPBG is handled through the Request a Quote form on this XAIPART page. Submit the required quantity and acceptable packaging information so the quotation can reflect the current channel position and lot conditions. A firm price should not be inferred from generic automotive Ethernet distributor listings because device condition and packing can materially affect commercial terms.
What is the lead time for BCM89500BPBG?
The current lead time for BCM89500BPBG should be confirmed through the Request a Quote form on this XAIPART page. Include the requested quantity, date-code preference, shipment destination, and whether the shipment must be traceable. For an automotive program, coordinate the confirmed lead time with production planning and incoming-inspection requirements before committing the shipment schedule.
Is BCM89500BPBG in stock?
BCM89500BPBG availability is confirmed through the Request a Quote form on this XAIPART page rather than inferred from a search-result status. Submit the required quantity and packaging details for the current stock position. Automotive-grade inventory may be lot- or date-code-specific, so an availability response should also identify the material being reserved.
What is the best Broadcom equivalent for BCM89500BPBG?
No Broadcom equivalent is confirmed as a drop-in replacement for BCM89500BPBG because the available cross-reference results do not identify a device with the same QFP-176 footprint, seven-port configuration, and automotive BroadR-Reach PHY behavior. The proper comparison method is to match the complete pin list and PHY capabilities, then validate timing, media support, power behavior, and AEC-Q100 qualification before production use.

داتای سەرچاوەی ئەندازیاری بۆ BCM89500BPBG — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose BCM89500BPBG when an automotive electronic control unit needs one component to consolidate seven vehicle Ethernet links, particularly when the design includes BroadR-Reach and Multi-BR connections. Its integration can simplify network topology and reduce controller count, while its AEC-Q100 screening level supports automotive qualification planning. The QFP-176 package is large and pin-intensive, so adequate routing space, thermal management, and PCB complexity are unavoidable engineering costs. Do not select it for a design needing only one or two ports, a materially smaller footprint, or media outside the documented automotive Ethernet and PHY capabilities. No confirmed drop-in replacement is available from the component cross-reference results, so any proposed substitute must pass a full comparison of the 176-terminal pinout, PHY functions, clocking, reset, power sequencing, automotive qualification, and media interoperability. A similarly positioned part should not be treated as interchangeable merely because it also appears in the interface-controller category.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Brand Broadcom
Package QFP-176
Terminal Count 176 terminals
Integrated Port Count 7 ports
Automotive Ethernet Support BroadR-Reach
PHY Support Multi-BR and Gigabit Ethernet PHY
Mounting Type Surface mount
Screening Level AEC-Q100
Terminal Form Gull wing
Product Class Ethernet transceiver and automotive network switch

جیاکەرەوە سەرەکییەکان

  • Seven-port integration (بەراورد بەNo confirmed drop-in alternative)
  • Automotive-specific media support (بەراورد بەNo confirmed drop-in alternative)
  • Automotive screening (بەراورد بەGeneric non-automotive Ethernet switches)

تێبینییەکانی دیزاین

Route every supported automotive Ethernet differential pair as a controlled-impedance pair with continuous reference planes, symmetric geometry, and minimized breakout discontinuities. Keep PHY and magnetics or connector interfaces away from switching and high-current power paths. Use the manufacturer reference layout and layer stack as the starting point, then verify pair length and insertion loss with the actual board material and connector choice.

Separate the device supply rails from noisy vehicle loads and place the manufacturer-recommended power and ground decoupling directly at the relevant QFP-176 terminals. Check startup current, operating current, and the power budget for all enabled PHYs before assigning vehicle supply capacity. Ground-plane discontinuities and long return paths can undermine automotive EMC and signal-integrity performance even when the nominal schematic is correct.

Do not infer the BCM89500BPBG pinout from another Broadcom Ethernet switch or from the QFP-176 terminal count. Use the exact manufacturer pin-description table to identify supplies, grounds, clocks, reset, management interfaces, and each PHY connection. Several board errors can appear electrically plausible while creating startup, isolation, or media-negotiation failures, so verify all 176 terminal assignments against the device documentation.

Treat the QFP-176 package as a substantial thermal design consideration in a compact automotive controller. Calculate worst-case dissipation from the actual supply voltage, enabled-PHY count, and load conditions, then provide copper area and thermal paths appropriate to the enclosure. Board temperature and neighboring component temperatures must remain within the limits specified for the device and the complete automotive ECU.

Validate the completed ECU for radiated and conducted emissions, immunity, and transient disturbance under the applicable vehicle program requirements. Automotive Ethernet links are vulnerable to common-mode noise when cable routing or grounding is poor, so include chassis, connector, and harness behavior in the test plan. Compliance depends on the complete product implementation, not on BCM89500BPBG alone.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The component listing identifies an AEC-Q100 screening level. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not established by the available product information.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

BCM89500BPBG datasheet BCM89500BPBG pinout BCM89500BPBG datasheet pdf Broadcom BCM89500BPBG BCM89500BPBG QFP-176 BCM89500BPBG 7-port switch BCM89500BPBG BroadR-Reach BCM89500BPBG automotive Ethernet BCM89500BPBG equivalent BCM89500BPBG replacement BCM89500BPBG cross reference BCM89500BPBG footprint BCM89500BPBG price BCM89500BPBG stock BCM89500BPBG application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Broadcom BCM89500BPBG BCM89500BPBG-ND 7-port Ethernet switch BroadR-Reach Multi-BR Gigabit Ethernet PHY Ethernet transceiver network controller and processor IC automotive Ethernet QFP-176 gull-wing package surface-mount package AEC-Q100 176 terminals Layer 2 switching vehicle network backbone infotainment advanced driver-assistance systems vehicle gateway electric vehicle controller controlled-impedance routing differential pair surface mount semiconductor
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ