BCM89500BPBG - 7-Port BroadR-Reach Switch | Broadcom
MPN: BCM89500BPBG ✓ 啟用中BCM89500BPBG 概覽
An automotive Ethernet switch is a network interface IC that connects multiple vehicle-network nodes, coordinates Ethernet traffic, and provides physical-layer connectivity over automotive copper links. Within the product hierarchy, BCM89500BPBG belongs to the Ethernet transceiver and interface-controller class, combining an Ethernet switch, PHY functions, and BroadR-Reach support in an automotive network controller and processor IC.
The principal product characteristics are seven integrated ports, BroadR-Reach automotive Ethernet connectivity, Multi-BR and Gigabit Ethernet PHY capability, a square surface-mount package with gull-wing terminals, and an AEC-Q100 screening level. The package is identified as QFP-176, providing 176 terminals for the high-pin-count mixed-signal and automotive Ethernet interface implementation. A system designer can therefore consolidate several vehicle Ethernet links into a single dedicated switching component rather than treating every link as an unrelated physical-layer endpoint.
BCM89500BPBG is particularly relevant to vehicle network architectures that combine established Gigabit Ethernet links with automotive BroadR-Reach connectivity. Its seven-port organization supports centralized Ethernet aggregation for vehicle computers, infotainment systems, telemetry controllers, advanced driver-assistance electronics, and other ECUs connected through an automotive Ethernet backbone. The integrated PHY arrangement can simplify board partitioning while preserving distinct network ports for different vehicle subsystems.
A typical automotive installation routes twisted-pair automotive Ethernet connections from several ECUs into the switch, then connects the backbone or service network through the remaining Ethernet ports. Board implementation must account for controlled-impedance differential routing, connector and cable loss, automotive transient immunity, grounding, isolation strategy, and the thermal environment around the QFP-176 package. PHY configuration, internal testing, and network-management functions should be validated against the Broadcom documentation for the exact device revision.
The primary engineering trade-off is integration versus routing complexity. A seven-port integrated switch reduces the number of discrete Ethernet interface components and centralizes automotive network connectivity, but every external copper link still requires careful PCB layout and validation. Power, ground, clock, reset, management, and media-dependent interface connections must be implemented according to the device pin description table rather than inferred from another Broadcom Ethernet device.
This product page combines the verified Broadcom product identity, interface classification, seven-port BroadR-Reach architecture, package characteristics, and AEC-Q100 screening information into an application-focused design reference. It also distinguishes verified package and qualification facts from detailed electrical parameters that must be confirmed in the manufacturer datasheet before schematic release, PCB implementation, or production qualification.
直接替換替代品,適用於 BCM89500BPBG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品BCM89500BPBG 最大額定值與電氣特性
| Product Type | 7-Port Integrated BroadR-Reach Automotive Switch |
| Device Classification | Ethernet Transceiver |
| Ethernet Interface Category | Drivers, Receivers, and Transceivers |
| Integrated Port Count | 7 ports |
| Automotive Ethernet Support | BroadR-Reach |
| PHY Support | Multi-BR and Gigabit Ethernet PHY |
| Package Type | QFP-176 square gull-wing surface-mount package |
| Terminal Count | 176 terminals |
| Package Shape | Square |
| Terminal Form | Gull wing |
| 安裝類型 | Surface mount |
| Screening Level | AEC-Q100 |
| Supplier Order Designator | BCM89500BPBG-ND |
BCM89500BPBG square 腳位配置指南
BCM89500BPBG(square 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: BCM89500BPBG.
請參閱 資料表 以查看完整腳位配置。
典型應用
BCM89500BPBG 適用於 6 應用s: Central Automotive Ethernet Backbone, Vehicle Infotainment Ethernet Aggregation, Advanced Driver-Assistance ECU Networking, Vehicle Telemetry and Gateway Interface, Body and Comfort Controller Hub, Electric Vehicle Platform Networking.
Central Automotive Ethernet Backbone
BCM89500BPBG fits a central vehicle-network switching block because it combines seven ports with BroadR-Reach, Multi-BR, and Gigabit Ethernet PHY support in one QFP-176 device. The switch can aggregate traffic from multiple ECUs while presenting a controlled Ethernet backbone to a gateway or central compute node. Using the manufacturer pin-description table and reference design keeps media routing, termination, clocking, and management interfaces aligned with the device architecture. The principal design benefit is reduced controller count; the corresponding trade-off is a demanding 176-terminal layout with multiple high-speed differential routing channels.
推薦
Vehicle Infotainment Ethernet Aggregation
An infotainment head unit can use BCM89500BPBG to consolidate several vehicle Ethernet links into a switched internal network. The seven-port architecture supports a mixture of automotive BroadR-Reach and Multi-BR connectivity while Gigabit Ethernet PHY capability handles compatible links. This arrangement is useful when audio, navigation, display, connectivity, and vehicle-compute subsystems must exchange packets through a centralized Layer 2 fabric. Board implementation should preserve controlled-impedance differential routing and validate connector, cable, and ECU interoperability rather than assuming every automotive Ethernet segment has identical media characteristics.
推薦
Advanced Driver-Assistance ECU Networking
BCM89500BPBG is applicable to an advanced driver-assistance electronic control unit that connects cameras, radar controllers, sensor fusion hardware, and vehicle computing nodes. Seven ports provide a practical means of organizing multiple automotive Ethernet links around one switching component, while the integrated PHY functions reduce the number of separate Ethernet interface devices. The design must still account for automotive electromagnetic immunity, ground and return paths, connector qualification, and synchronized startup. The manufacturer application and pin information should be used to confirm which media and diagnostic functions are assigned to each port.
推薦
Vehicle Telemetry and Gateway Interface
BCM89500BPBG can serve as the Ethernet aggregation element in a vehicle gateway that links diagnostic, telemetry, body, and domain-controller networks. Its seven-port BroadR-Reach architecture allows several physical links to terminate at one managed switching block, while Multi-BR and Gigabit Ethernet PHY support cover compatible network segments. This is especially relevant when a gateway must mediate traffic among controllers that use different automotive Ethernet media. Design teams should map the required link rates, auto-negotiation behavior, isolation boundaries, and network-management requirements to the manufacturer documentation before finalizing port assignments.
推薦
Body and Comfort Controller Hub
A body controller can use BCM89500BPBG to consolidate distributed door, lighting, climate, seat, and sensor-controller Ethernet connections. The seven-port switch provides a practical hub structure for a vehicle domain where several low- to medium-speed control nodes coexist with higher-bandwidth links. BroadR-Reach support makes the device relevant to automotive copper-pair networks rather than office-oriented Ethernet only. The board should use automotive-grade passive components and validate grounding, transient protection, and cable lengths against the target vehicle electrical environment.
推薦
Electric Vehicle Platform Networking
BCM89500BPBG fits an electric-vehicle platform controller that connects battery-management, charging, inverter, thermal-management, and vehicle-compute domains over automotive Ethernet. Seven ports allow a domain controller to organize multiple network segments while retaining a centralized switching point for traffic. Its AEC-Q100 screening level supports automotive qualification planning, although system-level qualification remains necessary. Engineers should review power-loss behavior, startup sequencing, fault containment, thermal performance, and cable connectivity before releasing a high-voltage-adjacent electronic control unit.
推薦
工程參考資料,適用於 BCM89500BPBG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Broadcom |
| Package | QFP-176 |
| Terminal Count | 176 terminals |
| Integrated Port Count | 7 ports |
| Automotive Ethernet Support | BroadR-Reach |
| PHY Support | Multi-BR and Gigabit Ethernet PHY |
| Mounting Type | Surface mount |
| Screening Level | AEC-Q100 |
| Terminal Form | Gull wing |
| Product Class | Ethernet transceiver and automotive network switch |
主要差異化特點
- Seven-port integration (對比No confirmed drop-in alternative)
- Automotive-specific media support (對比No confirmed drop-in alternative)
- Automotive screening (對比Generic non-automotive Ethernet switches)
設計說明
Route every supported automotive Ethernet differential pair as a controlled-impedance pair with continuous reference planes, symmetric geometry, and minimized breakout discontinuities. Keep PHY and magnetics or connector interfaces away from switching and high-current power paths. Use the manufacturer reference layout and layer stack as the starting point, then verify pair length and insertion loss with the actual board material and connector choice.
Separate the device supply rails from noisy vehicle loads and place the manufacturer-recommended power and ground decoupling directly at the relevant QFP-176 terminals. Check startup current, operating current, and the power budget for all enabled PHYs before assigning vehicle supply capacity. Ground-plane discontinuities and long return paths can undermine automotive EMC and signal-integrity performance even when the nominal schematic is correct.
Do not infer the BCM89500BPBG pinout from another Broadcom Ethernet switch or from the QFP-176 terminal count. Use the exact manufacturer pin-description table to identify supplies, grounds, clocks, reset, management interfaces, and each PHY connection. Several board errors can appear electrically plausible while creating startup, isolation, or media-negotiation failures, so verify all 176 terminal assignments against the device documentation.
Treat the QFP-176 package as a substantial thermal design consideration in a compact automotive controller. Calculate worst-case dissipation from the actual supply voltage, enabled-PHY count, and load conditions, then provide copper area and thermal paths appropriate to the enclosure. Board temperature and neighboring component temperatures must remain within the limits specified for the device and the complete automotive ECU.
Validate the completed ECU for radiated and conducted emissions, immunity, and transient disturbance under the applicable vehicle program requirements. Automotive Ethernet links are vulnerable to common-mode noise when cable routing or grounding is poor, so include chassis, connector, and harness behavior in the test plan. Compliance depends on the complete product implementation, not on BCM89500BPBG alone.
合規資訊
The component listing identifies an AEC-Q100 screening level. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not established by the available product information.