BD37533FV-E2 - 5-Channel Audio Processor | ROHM Semiconductor
MPN: BD37533FV-E2 ✓ چالاکBD37533FV-E2 گشتی
A car-audio tone processor is an application-specific analog audio IC that controls input selection, gain, volume, loudness, channel attenuation, and frequency response. It sits between audio sources and power amplifiers in the signal path, converting source-level and user-control commands into predictable analog operating conditions. By integrating these functions, the BD37533FV-E2 simplifies board partitioning while preserving separate controls for multiple speaker channels.
Its principal features include a 3-band equalizer covering bass, middle, and treble, parametric adjustment without external equalizer components, stereo input selection with single-ended and ground-isolated input functions, input-gain control, main-volume control, loudness processing, and 5-channel fader volume. The built-in subwoofer low-pass filter supports space-efficient designs, while mixing-input capability adds flexibility for combining and routing multiple audio sources.
The BD37533FV-E2 is controlled through an I2C interface, allowing a vehicle head unit, audio controller, or embedded controller to adjust tone and routing settings. Its 0.4 MHz operating indication, seven-to-9.5 V supply range, and integration of multiple analog controls suit automotive audio systems operating from a conventional low-voltage vehicle power architecture after regulation. The 28-SSOP-B package supports compact, high-density implementation on conventional through-hole assembly boards.
Typical applications include vehicle head units, car stereos, factory-installed infotainment systems, amplified speaker modules, subwoofer controller boards, and compact automotive audio distributors. It is particularly useful when designers need programmable bass, middle, and treble response in one audio subsystem and want to avoid discrete tone-control networks or separate subwoofer filtering stages.
Design the power rails and signal grounding carefully because the IC combines external control with precision analog audio functions. Place input and output decoupling close to the device, maintain short return paths for audio signals, and verify the external resistor and capacitor values against the manufacturer’s reference configuration. The analog input range must also remain within the device’s specified limits to prevent clipping or incorrect gain behavior.
This page organizes the key electrical limits, package information, application guidance, verified sourcing links, and a drop-in comparison for the BD37533FV-E2. It also highlights design checks for analog grounding, I2C control, filter configuration, supply decoupling, and system-level channel routing that engineers can apply before circuit-board release.
جێگرەوەکانی جێگۆڕکێ بۆ BD37533FV-E2 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
BD3533F-E2
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
BD37533FV-E2 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 5-channel car-audio sound processor |
| Built-in Equalizer | 3-band parametric equalizer |
| Equalizer Bands | Bass, middle, and treble |
| Equalizer Adjustment | Parametric adjustment without external components |
| Supply Voltage Range | 7 V to 9.5 V |
| Control Interface | I2C |
| Internal Operating Frequency | 0.4 MHz |
| Input Selection | Stereo single-ended and ground-isolated input switching |
| Input Gain Control | Yes |
| Main Volume Control | Yes |
| Loudness Function | Yes |
| Fader Volume Control | 5 channels |
| Subwoofer Low-Pass Filter | Built-in LPF for subwoofer output |
| Mixing Input | Supported |
| پاکێج | 28-pin SSOP-B |
| Package Body Width | 5.60 mm |
| جۆری دامەزراندن | Surface Mount |
ڕێنمایی ڕێکخستنی پینی BD37533FV-E2 5.60 mm
ڕێکخستنی پین بۆ BD37533FV-E2 (پاکێجی 5.60 mm). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ BD37533FV-E2.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
BD37533FV-E2 گونجاوە بۆ 6 بەکارھێنانs: Automotive Head Unit, Car Stereo Amplifier Control, Subwoofer Output Processing, Vehicle Infotainment Audio, Compact Automotive Speaker Module, Automotive Sound Distribution Box.
Automotive Head Unit
The BD37533FV-E2 fits an automotive head unit because it integrates the tone and channel controls normally distributed across several analog blocks. Its 7 V to 9.5 V operating range suits a regulated vehicle audio rail, while the built-in bass, middle, and treble parametric equalizer enables calibration through I2C. The five-channel fader, main volume, loudness function, stereo input selection, and subwoofer low-pass filter support a compact, centrally controlled car-audio architecture without requiring a separate passive tone network.
پێشنیارکراو
Car Stereo Amplifier Control
In a car-stereo amplifier-control board, the BD37533FV-E2 can condition multiple audio channels before power amplification. Its integrated input-gain and main-volume controls establish consistent signal levels, while the five-channel fader supports independent attenuation across the speaker system. The 3-band equalizer allows tonal compensation for vehicle acoustics, and the mixing-input function adds routing flexibility. Designers still need to verify signal levels, grounding, amplifier input impedance, and channel mute behavior in the manufacturer reference configuration.
پێشنیارکراو
Subwoofer Output Processing
The BD37533FV-E2 is appropriate for systems requiring a dedicated low-frequency path because its built-in low-pass filter supports the subwoofer output. This integration can reduce the component count associated with a separate subwoofer filtering stage while retaining the 3-band equalizer for broader tonal control. In practice, the system designer should establish crossover slope, channel attenuation, and output level from the manufacturer reference circuit, then confirm that downstream amplifiers and the speaker load remain compatible.
پێشنیارکراو
Vehicle Infotainment Audio
The BD37533FV-E2 can serve as the tone-processing block between vehicle infotainment sources and power amplifiers. Its stereo input selector accommodates source routing, including single-ended and ground-isolated operating modes, while I2C control allows software-driven volume and equalizer adjustment. The built-in loudness function and five-channel fader are useful in a multi-zone passenger-compartment audio design. System integration should account for source ground offsets, startup mute sequencing, I2C addresses, and the controlled 7 V to 9.5 V supply range.
پێشنیارکراو
Compact Automotive Speaker Module
A compact automotive speaker module can use the BD37533FV-E2 to manage gain, equalization, loudness, and channel attenuation close to the amplifier inputs. Centralizing these controls shortens sensitive analog paths and provides a single programmable interface for a vehicle controller. The 28-pin SSOP-B package accommodates a dense through-hole PCB, while the integrated 3-band equalizer avoids a separate discrete bass, middle, and treble network. Input and output decoupling should follow the manufacturer layout to preserve low-level audio behavior.
پێشنیارکراو
Automotive Sound Distribution Box
The BD37533FV-E2 is suitable for an in-vehicle sound distribution box that accepts several source signals and drives multiple speaker channels. Mixing input, stereo source selection, input-gain control, main volume, five-channel fader, and subwoofer filtering provide the core functions expected in a distribution and control module. An embedded controller can adjust the operating mode over I2C. Careful grounding, source isolation, connector protection, and channel-signal routing are essential because external vehicle wiring can introduce noise and ground-potential variation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ BD37533FV-E2 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | BD3533F-E2 |
|---|---|---|
| Package | 28-SSOP-B | 28-SSOP-B |
| Brand | ROHM Semiconductor | ROHM Semiconductor |
| Product Category | Car-audio sound processor | Audio processor |
جیاکەرەوە سەرەکییەکان
- Broader integrated tone and routing control (بەراورد بەBD3533F-E2)
- Purpose-built five-channel car-audio architecture (بەراورد بەBD3533F-E2)
- Software-configurable tone adjustment (بەراورد بەBD3533F-E2)
تێبینییەکانی دیزاین
Place the input and output bypass capacitors close to their associated supply and ground pins, and route analog audio traces away from switching nodes and high-current amplifier outputs. The BD37533FV-E2 combines low-level signal processing with digital control, so a continuous ground plane, short return paths, and disciplined partitioning between analog and I2C sections are important. Follow the pin assignments and component-placement example in the ROHM manufacturer datasheet when finalizing the 28-SSOP-B footprint.
Design the 7 V to 9.5 V supply path for stable operation across vehicle electrical transients and temperature variation. Confirm regulator output limits, startup behavior, and decoupling values against the manufacturer application circuit before connecting the device to an automotive battery-derived rail. Do not treat the documented operating range as an absolute-maximum rating; use the datasheet limits for transient, grounding, and protection design.
Use the manufacturer reference values for input, gain, volume, loudness, equalizer, and fader settings to keep the signal chain within its intended operating region. Verify maximum input amplitude at every source and channel route, and include adequate source impedance to match the device’s input network. Avoid placing long unprotected vehicle-cable routes directly on the IC; use appropriate connector protection, filtering, and ground-isolation measures.
Do not assume that another 28-pin ROHM audio processor is interchangeable merely because its package matches. The BD37533FV-E2 has specific combinations of 3-band equalization, loudness, five-channel fader, input switching, and subwoofer filtering. Before choosing the BD3533F-E2, compare every pin, control register, analog level, and routing function. Changing an audio processor can require schematic, firmware, and PCB changes even when the mechanical package is the same.
زانیاری پابەندبوون
The manufacturer product page identifies a car-audio sound processor, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified in the cited product information. Compliance must be confirmed for the exact ordering code and current manufacturer documentation before production release.