Silicon Labs

C8051F067-GQ - 25MHz 8051 Flash MCU | Silicon Labs

MPN: C8051F067-GQ ✓ چالاک
2.7 V to 3.6 V Vdss 64-TQFP (10 x 10 mm) Package 25 MHz Speed 32 kB Memory
MOQ: 1 |

C8051F067-GQ گشتی

Silicon Labs C8051F067-GQ is an 8-bit C8051F06x-series flash microcontroller operating at up to 25 MHz, with 32 KB of flash program memory, 4.25 kB of data RAM, and a 64-TQFP package. It provides 24 I/O pins, one 16-bit ADC channel, five timers or counters, and serial interfaces including I2C, SMBus, SPI, and UART for embedded control and communications designs.

An 8051 microcontroller is an embedded-processing component that executes firmware from program memory and controls sensors, actuators, communications, and human-interface circuitry. Within the embedded hierarchy, the C8051F06x belongs to the 8-bit MCU, embedded-controller, and flash-microcontroller categories. Its combination of deterministic peripherals, integrated Flash memory, and mixed-signal capability makes it suitable for compact industrial controllers, communication modules, and cost-sensitive products requiring a broad peripheral set.

Key features include a 25 MHz maximum clock, 32 KB flash program storage, 4.25 kB data RAM, 24 general-purpose I/O pins, and a 16-bit ADC. The integrated I2C, SMBus, SPI, and UART interfaces allow the MCU to connect sensors, transceivers, memories, and host systems without requiring several external serial controllers. A supply range of 2.7 V to 3.6 V supports compact embedded systems, while the operating-temperature range of -40°C to +85°C suits industrial equipment.

The C8051F067-GQ uses an 8-bit C8051 processor core and combines Flash program memory with SRAM for working data. Its 64-pin TQFP package provides a conventional surface-mount footprint with ample signal access for mixed-signal and communication designs. A 16-bit ADC channel supports analog measurements, while five timers or counters support timing, pulse generation, and periodic control tasks.

Typical applications include industrial sensor controllers, UART- or SPI-based communication modules, I2C sensor nodes, motor and actuator controllers, and compact embedded control boards. The MCU is especially useful when local firmware must coordinate several serial peripherals while maintaining a small 8-bit platform. The 24 I/O pins also leave useful logic connectivity for status indicators, interlocks, and discrete controls.

Design the PCB with short, continuous return paths for ground and sensitive analog signals, particularly around the ADC. Follow the manufacturer's pin-connection table when assigning power, clock, reset, programming, and I/O functions. The device is moisture sensitive, so production handling should follow the prescribed dry-pack, bake, and reflow controls rather than assuming unlimited floor-life exposure.

This product page combines the C8051F067-GQ specification summary with practical interface-planning guidance, package-aware alternatives, application analysis, and design considerations. It helps engineers determine whether the 25 MHz 8051 core, 32 KB Flash memory, mixed-signal peripherals, and 64-TQFP footprint fit a design before beginning firmware and PCB implementation.

جێگرەوەکانی جێگۆڕکێ بۆ C8051F067-GQ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ C8051F067-GQ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, Package, Processor Core.

Silicon Labs
Mounting Type: Surface mount
Package: 100-pin TQFP (14 mm x 14 mm)
Processor Core: 8051 core
بەراوردکردن لەگەڵ C8051F067-GQ →
Silicon Labs
Mounting Type: Surface mount
Package: 100-pin TQFP (14 mm x 14 mm)
Processor Core: 8051 core
بەراوردکردن لەگەڵ C8051F067-GQ →

C8051F064-GQ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 64-TQFP (10 x 10 mm)
Same-package C8051F06x-family variant with approximately 16 kB Flash, about 50% less program memory than the C8051F067-GQ; pin use requires comparison

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

C8051F065-GQ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 64-TQFP (10 x 10 mm)
Same-package C8051F06x-family variant with approximately 32 kB Flash and 4.25 kB RAM; peripheral differences require verification

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

C8051F066-GQ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 64-TQFP (10 x 10 mm)
Same-package C8051F06x-family variant with approximately 32 kB Flash and fewer or different peripheral resources; exact assignments require comparison

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

C8051F067-GQR

✅ جێگرەوەی ڕاستەوخۆ
📦 64-TQFP (10 x 10 mm)
Same 32 kB Flash, 25 MHz, and 64-TQFP device with a different order-code suffix; no electrical difference is identified, but packing convention differs

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

C8051F061-GQ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Silicon Labs
📦 64-TQFP (10 x 10 mm)
8-bit mixed-signal microcontroller · 8051-compatible CIP-51 core · 25 MHz · 64KB (64K x 8) · In-system programmable flash · 4.25KB (4352 bytes: 4096 + 256 bytes) · 16-bit SAR · Two separate 16-bit SAR ADCs

پەیوەندی بۆ نرخ

بینینی داتاشیت →

C8051F067-GQ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Processor Core 8051 8-bit
زۆرترین فرێکوێنسیی کاتژمێر 25 MHz
Program Memory Size 32 kB
Program Memory Type Flash
Data RAM Size 4.25 kB
Data ROM Size 64 kB
Data ROM Type Flash
پانی بسێ داتا 8 bit
Supply Voltage Range 2.7 V to 3.6 V
ADC Resolution 16 bit
Number of ADC Channels 1 channel
Number of I/O Pins 24
Number of Timers/Counters 5
Serial Interfaces I2C, SMBus, SPI, UART
مەودای پلەی گەرمیی کارکردن -40°C to +85°C
پاکێج 64-TQFP (10 x 10 mm)
جۆری دامەزراندن Surface-mount
Moisture Sensitivity Moisture sensitive
Standard Pack Quantity 800 units
دۆخی RoHS Compliant

ڕێنمایی ڕێکخستنی پینی C8051F067-GQ 64-tqfp (10 x 10 mm)

ڕێکخستنی پین بۆ C8051F067-GQ (پاکێجی 64-tqfp (10 x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 64-tqfp (10 x 10 mm) بۆ C8051F067-GQ

هیچ داتای وردی پینئاوت بەردەست نییە بۆ C8051F067-GQ.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

C8051F067-GQ گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Controller, UART Communication Module, SPI Sensor Acquisition Node, Compact Motor Controller, LED Lighting Controller, Battery-Powered IoT Device.

🏭

Industrial Sensor Controller

The C8051F067-GQ fits industrial sensor controllers that require deterministic local processing, analog measurement, and flexible serial connectivity. Its 25 MHz 8051 core can sample a sensor through the 16-bit ADC and manage filtering or calibration, while the listed 4.25 kB RAM supports working buffers and control state. I2C and SMBus suit common digital sensors, and SPI or UART can connect a local gateway. The -40°C to +85°C rating supports industrial environments, while the 2.7 V to 3.6 V range aligns with 3.3 V system rails.

🌐

UART Communication Module

The C8051F067-GQ is suitable for a compact UART communication module because it combines a 25 MHz 8051 core, 32 kB of Flash program memory, and five timers or counters in a 64-TQFP package. Firmware can frame protocol data, manage timeouts, and support a host or downstream controller through UART while keeping the interface burden on the MCU. The 24 I/O pins leave additional connections for configuration, indicators, and handshake signals, and the 3.3 V operating range simplifies integration with modern serial equipment.

🧩

SPI Sensor Acquisition Node

The C8051F067-GQ can act as the acquisition and control MCU in an SPI sensor node. Its SPI interface allows connection to sensors or converters with serial output, while the 16-bit ADC provides a complementary analog measurement channel when the device must monitor a mixed-signal input. The 32 kB Flash region accommodates drivers, calibration tables, and protocol handling, and the five timers can organize periodic sampling. Its 24 available I/O pins support chip selects, sensor interrupts, status LEDs, and local actuator controls.

🔧

Compact Motor Controller

The C8051F067-GQ is well suited to compact motor and actuator controllers where timing, digital control, and mixed-signal feedback are needed. Its five timers or counters can support PWM generation, input capture, and periodic control tasks, while 24 I/O pins provide gate-drive commands, direction signals, limit inputs, and status outputs. The 16-bit ADC can monitor a current or position sensor where suitable signal conditioning is present. Firmware can implement closed-loop sequencing without requiring a larger processor in a simple embedded system.

💡

LED Lighting Controller

The C8051F067-GQ can control addressable or multi-channel LED lighting systems where compactness and deterministic timing are important. Its timer resources can generate precise update intervals and PWM-related timing, while 24 I/O pins can drive channel enables, level-shift enables, fault inputs, and communications lines. The 32 kB Flash capacity is suitable for effect tables, calibration values, and communication protocols. A 3.3 V supply domain simplifies interface to contemporary LED drivers and digital lighting control modules.

📱

Battery-Powered IoT Device

The C8051F067-GQ fits a compact 3.3 V IoT device when local control and serial sensor integration matter more than maximum application processor performance. Its 25 MHz clock provides useful processing headroom, while I2C, SMBus, SPI, and UART permit connection of environmental sensors and a communication module. The 32 kB Flash area supports networking and update code, and the 24 I/O pins can handle wake, status, and actuator signals. Duty-cycle behavior and sleep-mode energy use must be checked against the complete battery budget and radio duty cycle.

What are the key specifications of C8051F067-GQ that engineers should know?
The C8051F067-GQ is an 8-bit 8051 flash microcontroller with a 25 MHz maximum clock, 32 kB of program Flash, 4.25 kB of data RAM, and 24 I/O pins. It also includes one 16-bit ADC channel, five timers or counters, and I2C, SMBus, SPI, and UART interfaces. According to the Silicon Labs product listing and manufacturer datasheet, the device is packaged in a 64-TQFP measuring 10 x 10 mm and operates from 2.7 V to 3.6 V.
Where can I download the C8051F067-GQ datasheet PDF?
The C8051F067-GQ datasheet and pin-connection information are available through the Silicon Labs product documentation and the linked manufacturer-product page. The C8051F067-GQ technical listing identifies the part as a C8051F06x-series device with 32 kB Flash, a 25 MHz maximum clock, and a 64-TQFP package. Before assigning PCB nets or programming bootloader functions, use the pin-connection table in the manufacturer datasheet because package codes and exposed functions must be checked against the exact ordering code.
Where can I find the C8051F067-GQ pinout?
The C8051F067-GQ pinout is defined by the manufacturer's 64-pin TQFP pin-connection table. The verified product listing identifies the package as 64-TQFP in a 10 x 10 mm outline, while the related product record identifies 24 user I/O pins. Use the exact C8051F067-GQ diagram to map power, ground, clock, reset, programming, analog, and digital signals; do not infer unused TQFP positions solely from the number of user I/O pins.
What is the operating voltage of C8051F067-GQ?
The C8051F067-GQ operates from 2.7 V to 3.6 V. This supply range is stated for the exact ordering code in the product listing and is suitable for compact embedded systems that standardize on a 3.3 V rail. The manufacturer datasheet should be used to confirm absolute maximum ratings, internal regulator behavior, and the required voltage for each supply domain before component selection or power-budget calculations.
What memory and peripherals does the C8051F067-GQ include?
The C8051F067-GQ includes 32 kB of Flash program memory, 4.25 kB of data RAM, and a listed 64 kB Flash data-ROM resource. Its integrated peripherals include a 16-bit ADC with one channel, five timers or counters, and I2C, SMBus, SPI, and UART interfaces. According to the exact MPN listing, the processor uses an 8-bit 8051 core with an 8-bit data bus and can operate at up to 25 MHz.
Is C8051F067-GQ suitable for industrial control applications?
Yes, the C8051F067-GQ is suitable for industrial control applications that fit its -40°C to +85°C operating range and available peripheral set. The 25 MHz 8051 core, five timers or counters, 24 I/O pins, and four listed serial-interface types support sensor acquisition, actuator sequencing, and communications. Its 2.7 V to 3.6 V supply range also fits 3.3 V embedded equipment, although the final design still requires EMC, surge, and environmental qualification at the system level.
What can replace C8051F067-GQ as a drop-in MCU?
The closest drop-in candidates are same-package members of the Silicon Labs C8051F06x family, provided their pin-connection tables and peripheral mappings match the target board. The verified C8051F067-GQ uses a 64-TQFP package, so a replacement must preserve the same footprint, power pins, clock interface, programming signals, and relevant peripheral assignments. The family variants listed with this part add distinct memory or peripheral differences; firmware and board-level validation remain necessary before treating any candidate as a production replacement.
Is C8051F067-GQ the same as C8051F067-GQR?
No, the GQ and GQR order codes identify different delivery configurations for the C8051F067 device rather than necessarily different silicon functions. C8051F067-GQ is the target 64-TQFP ordering code, while C8051F067-GQR appears in distributor results with the same 32 kB Flash and 25 MHz device description. The exact package dimensions and ordering-code suffix must be checked before substitution because reel, tube, or other packing conventions can differ even when the underlying device and land pattern are identical.
How do I choose between C8051F067-GQ and a C8051F06x drop-in alternative?
Choose C8051F067-GQ when the design requires its exact 32 kB Flash configuration, 4.25 kB RAM, 24 I/O pins, and specified peripheral allocation in a 64-TQFP footprint. Select a same-family alternative only when its flash capacity, RAM, clock behavior, pin assignments, and mixed-signal functions match the board. For example, a lower-memory family member can fit a simpler firmware image but may not support the same buffer or application complexity, while a higher-capacity member can add cost unnecessarily.
What is the best cross-brand equivalent for C8051F067-GQ?
No verified cross-brand drop-in equivalent is established for the C8051F067-GQ. A cross-brand MCU must match the 64-TQFP land pattern, pin functions, power architecture, clock requirements, programming method, peripheral mapping, and interrupt behavior, not merely the clock rate and memory size. Because the available comparison records do not identify a verified pin-compatible third-party device, use the Request a Quote form for availability and engineering-review options rather than treating a generic 8-bit MCU as a drop-in replacement.
Where can I buy C8051F067-GQ online?
Use the Request a Quote form on this page to request C8051F067-GQ availability, lead time, and an order quotation. The manufacturer part is an active catalog device with 32 kB Flash, a 25 MHz maximum clock, and a 64-TQFP package. A procurement request should state the exact C8051F067-GQ ordering code, required quantity, date code, and delivery packaging so that the manufacturer or authorized supply channel can confirm the correct configuration.
What is the lead time for C8051F067-GQ?
The current production lead time for C8051F067-GQ must be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, packaging format, manufacturing capacity, and date-code availability, so a general catalog statement would not answer a procurement requirement accurately. Include the required delivery date and target quantity in the request, and specify whether an industrial temperature grade or a particular reel or tray configuration is required.
Is C8051F067-GQ in stock?
Stock availability for C8051F067-GQ should be confirmed through the Request a Quote form on this page. Distributor search listings indicate that the exact part is offered for procurement, but a listing alone does not establish the quantity available for your delivery date or packaging format. Provide the required quantity, shipment location, and acceptable date-code window in the request so the current allocation can be matched to the production plan.
C8051F067-GQ vs C8051F067-GQR: which ordering code should I use?
Use C8051F067-GQ when the board documentation and purchasing specification require the GQ ordering code and its associated delivery configuration. The GQR listing describes the same C8051F067 8051 architecture, 25 MHz maximum clock, and 32 kB Flash, but the R suffix can indicate a different packing or order-option convention. Confirm the exact suffix, package, quantity per reel, and manufacturer ordering information before substituting GQR for GQ.
Is C8051F067-GQ suitable for battery-powered IoT sensor nodes?
The C8051F067-GQ can serve as the control MCU in a battery-powered IoT sensor node when its 2.7 V to 3.6 V operating range matches the available regulated rail and its 25 MHz performance is sufficient. Its I2C and SMBus support suit short-range sensor connections, while SPI or UART can support a radio or gateway link. Power consumption, sleep behavior, and analog accuracy must be evaluated with the complete system power budget because battery life depends on the duty cycle and downstream sensor load.
What design considerations apply when soldering C8051F067-GQ?
Handle C8051F067-GQ as a moisture-sensitive device and follow the manufacturer's reflow and dry-pack controls. The exact product record marks the package as moisture sensitive, so its permitted floor life and baking requirements should be applied before soldering. Use the 64-TQFP land pattern and pin-1 orientation from the manufacturer drawing, verify analog and digital return paths in the PCB layout, and complete post-reflow inspection because fine-pitch TQFP joints can be vulnerable to solder bridges.

داتای سەرچاوەی ئەندازیاری بۆ C8051F067-GQ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the C8051F067-GQ when the design needs a compact 8-bit controller with a 25 MHz 8051 core, 32 kB Flash, 4.25 kB RAM, 24 I/O pins, one 16-bit ADC channel, and integrated I2C, SMBus, SPI, and UART in a 64-TQFP footprint. Choose a lower-memory C8051F06x member only when its reduced Flash capacity is sufficient and its exact peripheral allocation matches the design. Consider C8051F067-GQR when the same electrical device is needed but the order code or packing convention differs. No cross-brand drop-in equivalent should be selected solely from clock speed and memory specifications: a third-party MCU must also match pinout, power, clock, programming, interrupt, and peripheral assignments. Before production substitution, compare the manufacturer pin tables, verify the 2.7 V to 3.6 V power design, and recompile and test the firmware against the selected part.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە C8051F064-GQ C8051F065-GQ C8051F066-GQ C8051F067-GQR
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm)
Processor Core 8051, 8-bit 8051, 8-bit 8051, 8-bit 8051, 8-bit 8051, 8-bit
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz
Program Memory 32 kB Flash Approximately 16 kB Flash 32 kB Flash 32 kB Flash 32 kB Flash
Number of I/O Pins 24 24 24 24 24
Supply Voltage 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V
Operating Temperature -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C

جیاکەرەوە سەرەکییەکان

  • Higher flash capacity within the same C8051F06x package family (بەراورد بەC8051F064-GQ)
  • Electrical configuration retained across the GQ and GQR order codes (بەراورد بەC8051F067-GQR)
  • Broad integrated serial-interface coverage (بەراورد بەC8051F061-GQ)

تێبینییەکانی دیزاین

Use the manufacturer's 64-TQFP land pattern and verify pin 1, power pins, ground pins, clock connections, reset, and programming signals against the exact C8051F067-GQ pin table. Keep the ADC-related traces away from switching-node and high-current return paths. A solid ground plane under the device and short ground returns will reduce noise coupling; analog input routing should follow the manufacturer's recommended impedance and grounding arrangement.

Design the 2.7 V to 3.6 V supply for both average and startup demand, including analog peripherals, communications, and external loads driven through MCU pins. Provide local high-frequency decoupling at each supply pin and route it through a low-impedance path to the ground plane. Confirm the power pin connections and sequencing requirements in the manufacturer datasheet rather than assuming that every ground or supply ball can be connected interchangeably.

Estimated: at a 3.3 V supply and 15 mA total device current, the electrical input power is about 49.5 mW. This first-order value excludes external load power and is not a manufacturer power specification. Actual junction temperature depends on the 64-TQFP thermal resistance, copper area, ambient temperature, and neighboring heat sources, so use the datasheet thermal model and perform thermal validation for the final enclosure.

The device is moisture sensitive. Follow the manufacturer's dry-pack, floor-life, baking, and reflow instructions rather than exposing packed components to humid air indefinitely. Also avoid assuming that every available TQFP position is a user I/O: the exact product record identifies 24 I/O pins in a 64-pin package, and unused positions may have specialized power, ground, clock, reset, or programming functions.

Place the MCU so that its high-speed clock and serial interface routes do not cross noisy analog or switching-current paths. Keep external crystals or oscillators close to their assigned pins, provide a continuous ground reference under serial links, and reserve separate quiet routing for the ADC input. Check the programmed UART baud rate, SPI activity, and timing margin in the final layout because software configuration can reduce susceptibility even when the nominal clock remains at 25 MHz.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The exact-part LCSC listing identifies the C8051F067-GQ as RoHS compliant. No specific REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification claim is established for this ordering code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-15 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

C8051F067-GQ datasheet C8051F067-GQ pinout C8051F067-GQ specifications C8051F067-GQ 64-TQFP C8051F067-GQ equivalent C8051F067-GQ replacement C8051F067-GQ vs C8051F067-GQR Silicon Labs C8051F067-GQ C8051F067-GQ price C8051F067-GQ stock C8051F067-GQ application circuit C8051F067 25MHz flash microcontroller

پێکهاتە و زاراوە پەیوەندیدارەکان

Silicon Labs C8051F067-GQ C8051F064-GQ C8051F065-GQ C8051F066-GQ C8051F067-GQR C8051F06x series 8051 microcontroller 8-bit MCU embedded controller flash microcontroller semiconductor 25 MHz clock 32 kB Flash 4.25 kB data RAM 16-bit ADC I2C SMBus SPI UART 64-TQFP TQFP package family surface-mount device RoHS industrial sensor controller
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ