C8051F067-GQ - 25MHz 8051 Flash MCU | Silicon Labs
MPN: C8051F067-GQ ✓ 啟用中C8051F067-GQ 概覽
An 8051 microcontroller is an embedded-processing component that executes firmware from program memory and controls sensors, actuators, communications, and human-interface circuitry. Within the embedded hierarchy, the C8051F06x belongs to the 8-bit MCU, embedded-controller, and flash-microcontroller categories. Its combination of deterministic peripherals, integrated Flash memory, and mixed-signal capability makes it suitable for compact industrial controllers, communication modules, and cost-sensitive products requiring a broad peripheral set.
Key features include a 25 MHz maximum clock, 32 KB flash program storage, 4.25 kB data RAM, 24 general-purpose I/O pins, and a 16-bit ADC. The integrated I2C, SMBus, SPI, and UART interfaces allow the MCU to connect sensors, transceivers, memories, and host systems without requiring several external serial controllers. A supply range of 2.7 V to 3.6 V supports compact embedded systems, while the operating-temperature range of -40°C to +85°C suits industrial equipment.
The C8051F067-GQ uses an 8-bit C8051 processor core and combines Flash program memory with SRAM for working data. Its 64-pin TQFP package provides a conventional surface-mount footprint with ample signal access for mixed-signal and communication designs. A 16-bit ADC channel supports analog measurements, while five timers or counters support timing, pulse generation, and periodic control tasks.
Typical applications include industrial sensor controllers, UART- or SPI-based communication modules, I2C sensor nodes, motor and actuator controllers, and compact embedded control boards. The MCU is especially useful when local firmware must coordinate several serial peripherals while maintaining a small 8-bit platform. The 24 I/O pins also leave useful logic connectivity for status indicators, interlocks, and discrete controls.
Design the PCB with short, continuous return paths for ground and sensitive analog signals, particularly around the ADC. Follow the manufacturer's pin-connection table when assigning power, clock, reset, programming, and I/O functions. The device is moisture sensitive, so production handling should follow the prescribed dry-pack, bake, and reflow controls rather than assuming unlimited floor-life exposure.
This product page combines the C8051F067-GQ specification summary with practical interface-planning guidance, package-aware alternatives, application analysis, and design considerations. It helps engineers determine whether the 25 MHz 8051 core, 32 KB Flash memory, mixed-signal peripherals, and 64-TQFP footprint fit a design before beginning firmware and PCB implementation.
直接替換替代品,適用於 C8051F067-GQ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: C8051F067-GQ (相同外形與佔位) — 差異在於 Mounting Type, Package, Processor Core.
C8051F064-GQ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
C8051F065-GQ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
C8051F066-GQ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
C8051F067-GQR
✅ 直接替換📋 參考替代品(不在目錄中)
C8051F061-GQ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →C8051F067-GQ 最大額定值與電氣特性
| Processor Core | 8051 8-bit |
| 最大時脈頻率 | 25 MHz |
| Program Memory Size | 32 kB |
| Program Memory Type | Flash |
| Data RAM Size | 4.25 kB |
| Data ROM Size | 64 kB |
| Data ROM Type | Flash |
| 資料匯流排寬度 | 8 bit |
| Supply Voltage Range | 2.7 V to 3.6 V |
| ADC Resolution | 16 bit |
| Number of ADC Channels | 1 channel |
| Number of I/O Pins | 24 |
| Number of Timers/Counters | 5 |
| Serial Interfaces | I2C, SMBus, SPI, UART |
| 工作溫度範圍 | -40°C to +85°C |
| 封裝 | 64-TQFP (10 x 10 mm) |
| 安裝類型 | Surface-mount |
| Moisture Sensitivity | Moisture sensitive |
| Standard Pack Quantity | 800 units |
| RoHS 狀態 | Compliant |
C8051F067-GQ 64-tqfp (10 x 10 mm) 腳位配置指南
C8051F067-GQ(64-tqfp (10 x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: C8051F067-GQ.
請參閱 資料表 以查看完整腳位配置。
典型應用
C8051F067-GQ 適用於 6 應用s: Industrial Sensor Controller, UART Communication Module, SPI Sensor Acquisition Node, Compact Motor Controller, LED Lighting Controller, Battery-Powered IoT Device.
Industrial Sensor Controller
The C8051F067-GQ fits industrial sensor controllers that require deterministic local processing, analog measurement, and flexible serial connectivity. Its 25 MHz 8051 core can sample a sensor through the 16-bit ADC and manage filtering or calibration, while the listed 4.25 kB RAM supports working buffers and control state. I2C and SMBus suit common digital sensors, and SPI or UART can connect a local gateway. The -40°C to +85°C rating supports industrial environments, while the 2.7 V to 3.6 V range aligns with 3.3 V system rails.
推薦
UART Communication Module
The C8051F067-GQ is suitable for a compact UART communication module because it combines a 25 MHz 8051 core, 32 kB of Flash program memory, and five timers or counters in a 64-TQFP package. Firmware can frame protocol data, manage timeouts, and support a host or downstream controller through UART while keeping the interface burden on the MCU. The 24 I/O pins leave additional connections for configuration, indicators, and handshake signals, and the 3.3 V operating range simplifies integration with modern serial equipment.
推薦
SPI Sensor Acquisition Node
The C8051F067-GQ can act as the acquisition and control MCU in an SPI sensor node. Its SPI interface allows connection to sensors or converters with serial output, while the 16-bit ADC provides a complementary analog measurement channel when the device must monitor a mixed-signal input. The 32 kB Flash region accommodates drivers, calibration tables, and protocol handling, and the five timers can organize periodic sampling. Its 24 available I/O pins support chip selects, sensor interrupts, status LEDs, and local actuator controls.
推薦
Compact Motor Controller
The C8051F067-GQ is well suited to compact motor and actuator controllers where timing, digital control, and mixed-signal feedback are needed. Its five timers or counters can support PWM generation, input capture, and periodic control tasks, while 24 I/O pins provide gate-drive commands, direction signals, limit inputs, and status outputs. The 16-bit ADC can monitor a current or position sensor where suitable signal conditioning is present. Firmware can implement closed-loop sequencing without requiring a larger processor in a simple embedded system.
推薦
LED Lighting Controller
The C8051F067-GQ can control addressable or multi-channel LED lighting systems where compactness and deterministic timing are important. Its timer resources can generate precise update intervals and PWM-related timing, while 24 I/O pins can drive channel enables, level-shift enables, fault inputs, and communications lines. The 32 kB Flash capacity is suitable for effect tables, calibration values, and communication protocols. A 3.3 V supply domain simplifies interface to contemporary LED drivers and digital lighting control modules.
推薦
Battery-Powered IoT Device
The C8051F067-GQ fits a compact 3.3 V IoT device when local control and serial sensor integration matter more than maximum application processor performance. Its 25 MHz clock provides useful processing headroom, while I2C, SMBus, SPI, and UART permit connection of environmental sensors and a communication module. The 32 kB Flash area supports networking and update code, and the 24 I/O pins can handle wake, status, and actuator signals. Duty-cycle behavior and sleep-mode energy use must be checked against the complete battery budget and radio duty cycle.
推薦
推薦產品摘要
工程參考資料,適用於 C8051F067-GQ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | C8051F064-GQ | C8051F065-GQ | C8051F066-GQ | C8051F067-GQR |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) |
| Processor Core | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Program Memory | 32 kB Flash | Approximately 16 kB Flash | 32 kB Flash | 32 kB Flash | 32 kB Flash |
| Number of I/O Pins | 24 | 24 | 24 | 24 | 24 |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
主要差異化特點
- Higher flash capacity within the same C8051F06x package family (對比C8051F064-GQ)
- Electrical configuration retained across the GQ and GQR order codes (對比C8051F067-GQR)
- Broad integrated serial-interface coverage (對比C8051F061-GQ)
設計說明
Use the manufacturer's 64-TQFP land pattern and verify pin 1, power pins, ground pins, clock connections, reset, and programming signals against the exact C8051F067-GQ pin table. Keep the ADC-related traces away from switching-node and high-current return paths. A solid ground plane under the device and short ground returns will reduce noise coupling; analog input routing should follow the manufacturer's recommended impedance and grounding arrangement.
Design the 2.7 V to 3.6 V supply for both average and startup demand, including analog peripherals, communications, and external loads driven through MCU pins. Provide local high-frequency decoupling at each supply pin and route it through a low-impedance path to the ground plane. Confirm the power pin connections and sequencing requirements in the manufacturer datasheet rather than assuming that every ground or supply ball can be connected interchangeably.
Estimated: at a 3.3 V supply and 15 mA total device current, the electrical input power is about 49.5 mW. This first-order value excludes external load power and is not a manufacturer power specification. Actual junction temperature depends on the 64-TQFP thermal resistance, copper area, ambient temperature, and neighboring heat sources, so use the datasheet thermal model and perform thermal validation for the final enclosure.
The device is moisture sensitive. Follow the manufacturer's dry-pack, floor-life, baking, and reflow instructions rather than exposing packed components to humid air indefinitely. Also avoid assuming that every available TQFP position is a user I/O: the exact product record identifies 24 I/O pins in a 64-pin package, and unused positions may have specialized power, ground, clock, reset, or programming functions.
Place the MCU so that its high-speed clock and serial interface routes do not cross noisy analog or switching-current paths. Keep external crystals or oscillators close to their assigned pins, provide a continuous ground reference under serial links, and reserve separate quiet routing for the ADC input. Check the programmed UART baud rate, SPI activity, and timing margin in the final layout because software configuration can reduce susceptibility even when the nominal clock remains at 25 MHz.
合規資訊
The exact-part LCSC listing identifies the C8051F067-GQ as RoHS compliant. No specific REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification claim is established for this ordering code.