Silicon Labs

C8051F317-GM - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

MPN: C8051F317-GM ✓ چالاک
On-chip Vdss 24-QFN, 4 mm x 4 mm Package 25 MHz Speed 16 kB (16K x 8) Memory
MOQ: 1 |

C8051F317-GM گشتی

The Silicon Labs C8051F317-GM is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 16 kB of Flash memory, 1.25 kB of RAM, two comparators, and four 16-bit timers in a 24-QFN package measuring 4 mm by 4 mm. It combines general-purpose embedded control with on-chip analog peripherals in a compact surface-mount package.

An 8051 microcontroller is an embedded processor designed for control-oriented products such as meters, industrial controllers, sensor nodes, and compact automation equipment. Within the semiconductor hierarchy, it belongs to the microcontroller family, combining a CPU core, nonvolatile program memory, volatile data memory, timers, communications peripherals, and mixed-signal functions on one integrated circuit.

Key device features include a 25 MHz maximum clock, 16 kB Flash organized as 16K x 8, 1.25 kB RAM, and four 16-bit timer resources. The device also provides an ADC, two comparators, a power-on reset, a VDD monitor, and a watchdog. These integrated resources can reduce external component count in low-cost embedded systems that need local sensing and deterministic control without a higher-cost 32-bit processor.

The C8051F31x architecture is designed for compact embedded systems where the 8051 instruction set, mixed-signal integration, and small package are more valuable than maximum computational throughput. Four 16-bit timers support timing, pulse measurement, and periodic-control tasks, while the analog section allows the MCU to interface more directly with sensors and external thresholds. Silicon Labs describes the device as a highly integrated mixed-signal MCU with additional communication interfaces.

Typical uses include industrial sensing, compact motor-control functions, energy-metering peripherals, embedded automation modules, and low-power IoT equipment. For designs needing UART, SPI, or I2C connectivity, the specific peripheral availability and multiplexing must be checked against the manufacturer datasheet pin table before PCB assignment.

A critical PCB-design step is assigning all 24 QFN pins according to the package drawing and datasheet pin-description table. Decoupling should follow the recommended network and placement rules, while exposed-pad and thermal-layout requirements must be implemented according to the manufacturer guidelines. Firmware migration also requires checking interrupt vectors, peripheral registers, and clock settings.

This product page combines the confirmed C8051F317-GM characteristics with application guidance, engineering cautions, and confirmed same-family alternatives, providing design context that complements the manufacturer datasheet and package documentation.

جێگرەوەکانی جێگۆڕکێ بۆ C8051F317-GM — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ C8051F317-GM (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, Comparator Count, Product Type, Timer Count.

Silicon Labs
Package: QFN-28, 5 mm x 5 mm
Flash Memory: 16 kB
Comparator Count: 2
بەراوردکردن لەگەڵ C8051F317-GM →
Silicon Labs
Package: 28-QFN (5 x 5 mm)
Flash Memory: 16 KB
بەراوردکردن لەگەڵ C8051F317-GM →
Silicon Labs
Package: QFN-28, 5 mm x 5 mm
Flash Memory: 16 kB
Comparator Count: 2
بەراوردکردن لەگەڵ C8051F317-GM →

C8051F317-GMR

✅ جێگرەوەی ڕاستەوخۆ
📦 24-QFN (4x4)
Same C8051F317 base device and 24-QFN footprint; ordering suffix differs, with reel-oriented packaging versus the -GM cut-tape configuration

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

C8051F316-GM

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 24-QFN (4x4)
Same C8051F31x family and QFN-24 form; exact memory, analog, timer, and peripheral differences require confirmation before firmware or PCB reuse

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

C8051F311-GM

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Silicon Labs
📦 24-QFN (4x4)
8-bit mixed-signal microcontroller · 8051-compatible · 25 MHz · 25 MIPS · 16 KB · 1.25 KB · 10 bit · 2.7 V to 3.6 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

C8051F317-GM زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Mixed-signal 8-bit microcontroller (MCU)
Processor Core 8051, 8-bit
زۆرترین فرێکوێنسیی کاتژمێر 25 MHz
Flash Memory 16 kB (16K x 8)
RAM 1.25 kB
ADC On-chip ADC; resolution and channel count not specified in the available manufacturer product summary
Comparator Count 2 comparators
Timer Count 4 timers
Timer Resolution 16-bit
Communication Interfaces Additional on-chip communication interfaces; exact interface allocation requires the manufacturer pin and peripheral tables
پاکێج 24-QFN, 4 mm x 4 mm
جۆری دامەزراندن Surface mount
Power-On Reset On-chip
VDD Monitor On-chip
Watchdog On-chip

ڕێنمایی ڕێکخستنی پینی C8051F317-GM 24-qfn, 4 mm x 4 mm

ڕێکخستنی پین بۆ C8051F317-GM (پاکێجی 24-qfn, 4 mm x 4 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 24-qfn, 4 mm x 4 mm بۆ C8051F317-GM

هیچ داتای وردی پینئاوت بەردەست نییە بۆ C8051F317-GM.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

C8051F317-GM گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Nodes, Compact Motor Control, Metering and Measurement, Embedded Automation Modules, IoT Sensor Hubs, Low-Power Control Products.

🏭

Industrial Sensor Nodes

The C8051F317-GM fits compact industrial sensor nodes because it combines a 25 MHz 8051 core, 16 kB Flash, 1.25 kB RAM, an ADC, and two comparators in a 4 mm by 4 mm QFN-24 package. The MCU can acquire local analog measurements, perform thresholding and control logic, and manage periodic updates without requiring a separate analog IC. Its four 16-bit timers support precise sampling intervals, debouncing, and actuator timing. The primary design consideration is assigning the ADC and comparator signals against the QFN-24 pin table while preserving clean analog routing and the recommended decoupling network.

⚡

Compact Motor Control

C8051F317-GM can serve as the supervisory controller in a compact motor or actuator design because four 16-bit timers provide resources for pulse-width generation, input capture, and periodic control functions. Its 8051 core executes the control sequence at up to 25 MHz, while the ADC and two comparators support current, position, or limit sensing. Designers should use the timer outputs according to the manufacturer peripheral muxing table and keep motor-switching nodes away from sensitive analog inputs. Confirm whether the selected motor interface requires a more powerful MCU or external driver.

🔧

Metering and Measurement

The C8051F317-GM is appropriate for metering and measurement modules that need acquisition, local computation, and low-cost communication in one device. The 25 MHz 8051 core can process measurements, the on-chip ADC can serve analog inputs, and the four 16-bit timers can establish accurate measurement and sampling periods. Its 16 kB Flash supports embedded firmware while 1.25 kB RAM handles working data. For calibrated results, characterize the analog path, minimize trace pickup around sensitive pins, and use the datasheet's recommended reference and bypass-component arrangements.

🏭

Embedded Automation Modules

For compact automation modules, the C8051F317-GM combines an 8-bit 8051 processor with 16 kB Flash, 1.25 kB RAM, timers, comparators, and an ADC without requiring separate logic devices. It can supervise discrete sensors, implement state machines, and coordinate outputs through its available communication and timer resources. The 4 mm by 4 mm QFN-24 footprint helps reduce board area, but pin multiplexing must be planned carefully because analog, timer, debug, and serial functions may share leads. Validate the exact peripheral allocation before finalizing the PCB.

🧩

IoT Sensor Hubs

C8051F317-GM can serve as the local control element in a small IoT sensor hub where a low-cost 8-bit MCU must acquire data and manage attached circuitry. The 25 MHz core handles protocol handling and control logic, the 16 kB Flash stores application firmware, and the ADC and comparators support local sensing. Its small QFN-24 package is useful in compact assemblies, provided the board meets the manufacturer's footprint, solder, and exposed-pad requirements. Confirm communication-pin assignments and the operating voltage limits in the family datasheet.

📱

Low-Power Control Products

The C8051F317-GM is suitable for low-power control products that need more local intelligence than a simple discrete controller but do not require a 32-bit processor. Its 16 kB Flash stores firmware, 1.25 kB RAM supports control state, and the integrated watchdog, power-on reset, and VDD monitor support robust operation. The four 16-bit timers can schedule periodic tasks, while the ADC enables duty-cycle-based sensing. Actual low-current performance depends on the selected operating mode and clock configuration, so use the datasheet's power-consumption tables during battery-budget calculations.

کورتەی بەرهەمە پێشنیارکراوەکان

C8051F317-GM Silicon Labs بەکارهێنراوە لە: Industrial Sensor Nodes, Compact Motor Control, Metering and Measurement, Embedded Automation Modules, IoT Sensor Hubs, Low-Power Control Products C8051F316-GM C8051F31x family controller option بەکارهێنراوە لە: Industrial Sensor Nodes, Compact Motor Control, Embedded Automation Modules C8051F311-GM Silicon Labs بەکارهێنراوە لە: Industrial Sensor Nodes, Metering and Measurement, Low-Power Control Products C8051F317-GMR Reel-ordering configuration of the same MCU بەکارهێنراوە لە: IoT Sensor Hubs
What are the key specifications of C8051F317-GM that engineers should know?
The C8051F317-GM is a 25 MHz, 8-bit mixed-signal microcontroller with 16 kB Flash, 1.25 kB RAM, four 16-bit timers, an ADC, and two comparators. Silicon Labs identifies the package as a 4 mm by 4 mm QFN-24. According to the manufacturer product page, the device also includes an on-chip power-on reset, VDD monitor, watchdog, and additional communication interfaces. Its combination of an 8051 core and integrated analog resources makes it suited to compact sensing, timing, and control products.
What is the operating voltage range of C8051F317-GM?
The operating voltage range must be taken from the electrical characteristics table in the Silicon Labs C8051F31x datasheet before the device is used in a power design. The available manufacturer product summary confirms the 25 MHz clock, 16 kB Flash, 1.25 kB RAM, ADC, two comparators, and four 16-bit timers, but it does not state the complete VDD range. Check both the normal-operation and brownout conditions for the selected device grade before assigning the power rails.
Where can I download the C8051F317-GM datasheet PDF?
The official C8051F31x family datasheet is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/C8051F31x.pdf. It is the controlling document for the C8051F317-GM because the device is one member of the C8051F31x family. Use the family datasheet together with the C8051F317 device page for electrical limits, register definitions, package information, flash programming, and the authoritative pin-description table.
Where can I find the C8051F317-GM pinout?
The C8051F317-GM pinout is found in the QFN-24 package drawing and pin-description table in the official Silicon Labs C8051F31x datasheet. The component uses a 24-QFN package measuring 4 mm by 4 mm. Because alternate functions can be shared among digital I/O, analog inputs, timer signals, and communication interfaces, assign pins by consulting both the peripheral multiplexing table and the package drawing rather than relying only on a generic symbol.
Is C8051F317-GM suitable for industrial control and sensor applications?
Yes, C8051F317-GM is suitable for compact industrial control and sensor-node designs that benefit from an 8051 core and integrated mixed-signal resources. The device combines a 25 MHz processor, 16 kB Flash, 1.25 kB RAM, an ADC, two comparators, and four 16-bit timers. Its 4 mm by 4 mm QFN-24 package also supports space-constrained designs, although the exact communication interfaces and analog specifications must be confirmed in the datasheet.
Where can I buy C8051F317-GM online?
Use the Request a Quote form on this page to request C8051F317-GM availability, lead time, and an order quote. The exact manufacturer ordering code is C8051F317-GM, and listing records identify a 24-QFN, 4 mm by 4 mm package. Confirm the suffix, reel or cut-tape configuration, and target quantity in the quote request so the manufacturer part number and required packing format remain aligned.
What is the price of C8051F317-GM?
Pricing for C8051F317-GM is presented through the Request a Quote form on this page rather than as a fixed retail figure. The component is identified by the exact manufacturer ordering code C8051F317-GM, with a 4 mm by 4 mm QFN-24 package, 25 MHz clock, and 16 kB Flash configuration. Submit the required quantity and packing preference with the quote request for current commercial terms and lead-time confirmation.
What is the lead time for C8051F317-GM?
Request the current C8051F317-GM lead time through the Request a Quote form on this page. Lead time can vary with order quantity, production status, and the required packing format. The confirmed ordering code is C8051F317-GM, and the device is the 25 MHz, 16 kB Flash member of the C8051F31x family. Provide the forecast quantity and target delivery date when requesting a quotation.
Is C8051F317-GM in stock?
Check current C8051F317-GM stock status through the Request a Quote form on this page. The confirmed configuration is a 25 MHz mixed-signal 8051 MCU with 16 kB Flash in a 4 mm by 4 mm QFN-24 package. For production planning, include your required quantity, packing method, and date code preference in the request so availability can be evaluated against the actual manufacturing plan.
What can replace C8051F317-GM?
C8051F317-GMR is the closest confirmed ordering-code alternative because it denotes the same C8051F317 device in a reel-oriented suffix format. Before using it as a drop-in replacement, verify the manufacturer ordering information for the suffix and compare the packing method. Firmware and hardware compatibility are more likely than with a different MCU family, but the exact suffix interpretation must be confirmed against the current manufacturer documentation.
Is C8051F317-GM the same as C8051F317-GMR?
C8051F317-GM and C8051F317-GMR identify the same Silicon Labs C8051F317 silicon configuration but appear under different ordering suffixes. Both listings describe a 25 MHz, 16 kB Flash, 24-QFN microcontroller. The likely distinction is order packaging rather than electrical function, but suffix meaning must be checked in the manufacturer ordering guide. This distinction is operational rather than a different device architecture.
When should I choose C8051F317-GM over C8051F337-GM?
Choose C8051F317-GM when the design specifically requires the confirmed C8051F31x feature set of a 25 MHz 8051 core, 16 kB Flash, 1.25 kB RAM, an ADC, two comparators, and four 16-bit timers. A C8051F337-GM may suit a design with different memory or peripheral requirements, but it should not be treated as a drop-in replacement without comparing the complete pin table, voltage ratings, clock requirements, and firmware register map.
Can C8051F316-GM replace C8051F317-GM on the same PCB?
C8051F316-GM should not be assumed to be a direct PCB replacement for C8051F317-GM. Although both parts belong to the C8051F31x family and use the GM ordering form, memory size, analog resources, timers, communication peripherals, and alternate-function assignments may differ. Compare the manufacturer pin descriptions and electrical tables, then verify the existing firmware against the replacement's peripheral registers before approving the substitution.
What is the best equivalent for C8051F317-GM?
The most defensible confirmed equivalent is C8051F317-GMR because the device family and base ordering code remain C8051F317. The practical difference is expected to be the packaging suffix, not the 25 MHz processor, 16 kB Flash, or 24-QFN electrical configuration. For a cross-brand replacement, no pin-compatible model is established here. Any redesign should treat the different compiler, memory map, interrupt vector, and peripheral configuration as significant engineering work.
C8051F317-GM vs C8051F337-GM: which is better for a compact mixed-signal controller?
C8051F317-GM is the stronger choice when the design specifically requires the confirmed C8051F31x configuration of 25 MHz operation, 16 kB Flash, 1.25 kB RAM, two comparators, and four 16-bit timers in QFN-24. C8051F337-GM may offer a different balance of memory and peripherals, so it is preferable only if its detailed specifications reduce system cost or eliminate external components. Pin compatibility and firmware portability must be checked separately.

داتای سەرچاوەی ئەندازیاری بۆ C8051F317-GM — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose C8051F317-GM for compact 8051-based designs that need 25 MHz processing, 16 kB Flash, 1.25 kB RAM, four 16-bit timers, an ADC, and two comparators in a 4 mm by 4 mm QFN-24 package. C8051F317-GMR is the closest confirmed option when the same silicon configuration is desired with the -GMR ordering suffix, subject to confirming packing requirements. Consider C8051F316-GM or C8051F311-GM only after comparing memory, peripheral, pin-multiplexing, and electrical details; matching the package alone does not guarantee drop-in operation. For designs requiring a different instruction set, substantially more memory, or higher processing performance, choose another MCU family and treat the change as a hardware and firmware redesign.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە C8051F317-GMR C8051F316-GM C8051F311-GM
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 24-QFN (4x4) 24-QFN (4x4) 24-QFN (4x4) 24-QFN (4x4)
Processor Core 8051, 8-bit 8051, 8-bit C8051F31x, 8-bit C8051F31x, 8-bit
Ordering Suffix -GM -GMR -GM -GM

جیاکەرەوە سەرەکییەکان

  • Mixed-signal integration in a compact 24-QFN (بەراورد بەC8051F316-GM)
  • Confirmed 16 kB Flash and 1.25 kB RAM configuration (بەراورد بەC8051F311-GM)
  • Same base device with production packing flexibility (بەراورد بەC8051F317-GMR)

تێبینییەکانی دیزاین

Assign every QFN-24 lead from the Silicon Labs C8051F31x pin-description table before routing. The analog inputs, comparator signals, timer functions, serial interfaces, and programming signals may have alternate-function constraints, so a generic 24-pin symbol can create a board that cannot boot or cannot route its intended peripherals. Mark the exposed pad separately if the package drawing identifies one, and follow the manufacturer land pattern rather than inferring pad dimensions from the 4 mm body size.

Place the manufacturer-recommended supply bypass components directly between the applicable VDD and ground pins, with short, low-inductance traces. Do not route switching-node or high-current return paths beneath sensitive analog inputs. Because the confirmed product summary does not state the operating-voltage range, use the C8051F31x electrical-characteristics table to set VDD limits and verify startup behavior against the power-on reset and VDD monitor thresholds.

Plan analog routing separately from fast digital and communication nets. Keep the ADC and comparator paths short, use a continuous ground reference where the layout permits, and minimize copper area around high-impedance analog nodes. The two comparators and ADC are valuable only if the board does not add avoidable offset, pickup, or ground-bounce error, so validate the final layout against the datasheet application guidance and your sensor output impedance.

Do not treat a shared family name or matching QFN-24 outline as sufficient proof of interchangeability. Before replacing C8051F317-GM with C8051F316-GM or C8051F311-GM, compare the complete pin list, electrical limits, flash and RAM sizes, peripheral availability, interrupt vectors, clock setup, and compiler configuration. Also verify the meaning of the -GM and -GMR ordering suffixes so the requested production packing method is correct.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The available manufacturer product summary does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for C8051F317-GM. The device is not identified as an automotive-qualified AEC-Q100 variant in the available records.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

C8051F317-GM datasheet C8051F317-GM pinout C8051F317-GM datasheet pdf C8051F317-GM equivalent C8051F317-GM replacement C8051F317-GM footprint C8051F317-GM price C8051F317-GM stock Silicon Labs C8051F317-GM C8051F317 vs C8051F316 C8051F317 QFN24 microcontroller C8051F317-GM application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Silicon Labs C8051F317-GM C8051F317-GMR C8051F316-GM C8051F311-GM C8051F31x 8051 core 8-bit microcontroller mixed-signal MCU embedded microcontroller semiconductor 16 kB Flash 1.25 kB RAM ADC comparator 16-bit timer power-on reset VDD monitor watchdog timer communication interfaces QFN-24 QFN family surface-mount package industrial control sensor node
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ