C8051F317-GM - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
MPN: C8051F317-GM ✓ Hoạt độngC8051F317-GM Tóm tắt
An 8051 microcontroller is an embedded processor designed for control-oriented products such as meters, industrial controllers, sensor nodes, and compact automation equipment. Within the semiconductor hierarchy, it belongs to the microcontroller family, combining a CPU core, nonvolatile program memory, volatile data memory, timers, communications peripherals, and mixed-signal functions on one integrated circuit.
Key device features include a 25 MHz maximum clock, 16 kB Flash organized as 16K x 8, 1.25 kB RAM, and four 16-bit timer resources. The device also provides an ADC, two comparators, a power-on reset, a VDD monitor, and a watchdog. These integrated resources can reduce external component count in low-cost embedded systems that need local sensing and deterministic control without a higher-cost 32-bit processor.
The C8051F31x architecture is designed for compact embedded systems where the 8051 instruction set, mixed-signal integration, and small package are more valuable than maximum computational throughput. Four 16-bit timers support timing, pulse measurement, and periodic-control tasks, while the analog section allows the MCU to interface more directly with sensors and external thresholds. Silicon Labs describes the device as a highly integrated mixed-signal MCU with additional communication interfaces.
Typical uses include industrial sensing, compact motor-control functions, energy-metering peripherals, embedded automation modules, and low-power IoT equipment. For designs needing UART, SPI, or I2C connectivity, the specific peripheral availability and multiplexing must be checked against the manufacturer datasheet pin table before PCB assignment.
A critical PCB-design step is assigning all 24 QFN pins according to the package drawing and datasheet pin-description table. Decoupling should follow the recommended network and placement rules, while exposed-pad and thermal-layout requirements must be implemented according to the manufacturer guidelines. Firmware migration also requires checking interrupt vectors, peripheral registers, and clock settings.
This product page combines the confirmed C8051F317-GM characteristics with application guidance, engineering cautions, and confirmed same-family alternatives, providing design context that complements the manufacturer datasheet and package documentation.
Bộ thay thế dễ dàng lắp đặt cho C8051F317-GM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với C8051F317-GM (cùng hình factor và footprint) — khác nhau ở Package, Flash Memory, Comparator Count, Product Type, Timer Count.
C8051F317-GMR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
C8051F316-GM
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
C8051F311-GM
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →C8051F317-GM Tỷ lệ tối đa & tính chất điện
| Product Type | Mixed-signal 8-bit microcontroller (MCU) |
| Processor Core | 8051, 8-bit |
| Tần số xung maksimum | 25 MHz |
| Flash Memory | 16 kB (16K x 8) |
| RAM | 1.25 kB |
| ADC | On-chip ADC; resolution and channel count not specified in the available manufacturer product summary |
| Comparator Count | 2 comparators |
| Timer Count | 4 timers |
| Timer Resolution | 16-bit |
| Communication Interfaces | Additional on-chip communication interfaces; exact interface allocation requires the manufacturer pin and peripheral tables |
| Hộp | 24-QFN, 4 mm x 4 mm |
| Kiểu lắp đặt | Surface mount |
| Power-On Reset | On-chip |
| VDD Monitor | On-chip |
| Watchdog | On-chip |
Hướng dẫn cấu hình chân C8051F317-GM 24-qfn, 4 mm x 4 mm
Cấu hình chân cho C8051F317-GM (24-qfn, 4 mm x 4 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho C8051F317-GM.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
C8051F317-GM phù hợp cho 6 Áp dụngs: Industrial Sensor Nodes, Compact Motor Control, Metering and Measurement, Embedded Automation Modules, IoT Sensor Hubs, Low-Power Control Products.
Industrial Sensor Nodes
The C8051F317-GM fits compact industrial sensor nodes because it combines a 25 MHz 8051 core, 16 kB Flash, 1.25 kB RAM, an ADC, and two comparators in a 4 mm by 4 mm QFN-24 package. The MCU can acquire local analog measurements, perform thresholding and control logic, and manage periodic updates without requiring a separate analog IC. Its four 16-bit timers support precise sampling intervals, debouncing, and actuator timing. The primary design consideration is assigning the ADC and comparator signals against the QFN-24 pin table while preserving clean analog routing and the recommended decoupling network.
Được đề xuất
Compact Motor Control
C8051F317-GM can serve as the supervisory controller in a compact motor or actuator design because four 16-bit timers provide resources for pulse-width generation, input capture, and periodic control functions. Its 8051 core executes the control sequence at up to 25 MHz, while the ADC and two comparators support current, position, or limit sensing. Designers should use the timer outputs according to the manufacturer peripheral muxing table and keep motor-switching nodes away from sensitive analog inputs. Confirm whether the selected motor interface requires a more powerful MCU or external driver.
Được đề xuất
Metering and Measurement
The C8051F317-GM is appropriate for metering and measurement modules that need acquisition, local computation, and low-cost communication in one device. The 25 MHz 8051 core can process measurements, the on-chip ADC can serve analog inputs, and the four 16-bit timers can establish accurate measurement and sampling periods. Its 16 kB Flash supports embedded firmware while 1.25 kB RAM handles working data. For calibrated results, characterize the analog path, minimize trace pickup around sensitive pins, and use the datasheet's recommended reference and bypass-component arrangements.
Được đề xuất
Embedded Automation Modules
For compact automation modules, the C8051F317-GM combines an 8-bit 8051 processor with 16 kB Flash, 1.25 kB RAM, timers, comparators, and an ADC without requiring separate logic devices. It can supervise discrete sensors, implement state machines, and coordinate outputs through its available communication and timer resources. The 4 mm by 4 mm QFN-24 footprint helps reduce board area, but pin multiplexing must be planned carefully because analog, timer, debug, and serial functions may share leads. Validate the exact peripheral allocation before finalizing the PCB.
Được đề xuất
IoT Sensor Hubs
C8051F317-GM can serve as the local control element in a small IoT sensor hub where a low-cost 8-bit MCU must acquire data and manage attached circuitry. The 25 MHz core handles protocol handling and control logic, the 16 kB Flash stores application firmware, and the ADC and comparators support local sensing. Its small QFN-24 package is useful in compact assemblies, provided the board meets the manufacturer's footprint, solder, and exposed-pad requirements. Confirm communication-pin assignments and the operating voltage limits in the family datasheet.
Được đề xuất
Low-Power Control Products
The C8051F317-GM is suitable for low-power control products that need more local intelligence than a simple discrete controller but do not require a 32-bit processor. Its 16 kB Flash stores firmware, 1.25 kB RAM supports control state, and the integrated watchdog, power-on reset, and VDD monitor support robust operation. The four 16-bit timers can schedule periodic tasks, while the ADC enables duty-cycle-based sensing. Actual low-current performance depends on the selected operating mode and clock configuration, so use the datasheet's power-consumption tables during battery-budget calculations.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho C8051F317-GM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | C8051F317-GMR | C8051F316-GM | C8051F311-GM |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 24-QFN (4x4) | 24-QFN (4x4) | 24-QFN (4x4) | 24-QFN (4x4) |
| Processor Core | 8051, 8-bit | 8051, 8-bit | C8051F31x, 8-bit | C8051F31x, 8-bit |
| Ordering Suffix | -GM | -GMR | -GM | -GM |
Bảo phân biệt quan trọng
- Mixed-signal integration in a compact 24-QFN (vsC8051F316-GM)
- Confirmed 16 kB Flash and 1.25 kB RAM configuration (vsC8051F311-GM)
- Same base device with production packing flexibility (vsC8051F317-GMR)
Ghi chú thiết kế
Assign every QFN-24 lead from the Silicon Labs C8051F31x pin-description table before routing. The analog inputs, comparator signals, timer functions, serial interfaces, and programming signals may have alternate-function constraints, so a generic 24-pin symbol can create a board that cannot boot or cannot route its intended peripherals. Mark the exposed pad separately if the package drawing identifies one, and follow the manufacturer land pattern rather than inferring pad dimensions from the 4 mm body size.
Place the manufacturer-recommended supply bypass components directly between the applicable VDD and ground pins, with short, low-inductance traces. Do not route switching-node or high-current return paths beneath sensitive analog inputs. Because the confirmed product summary does not state the operating-voltage range, use the C8051F31x electrical-characteristics table to set VDD limits and verify startup behavior against the power-on reset and VDD monitor thresholds.
Plan analog routing separately from fast digital and communication nets. Keep the ADC and comparator paths short, use a continuous ground reference where the layout permits, and minimize copper area around high-impedance analog nodes. The two comparators and ADC are valuable only if the board does not add avoidable offset, pickup, or ground-bounce error, so validate the final layout against the datasheet application guidance and your sensor output impedance.
Do not treat a shared family name or matching QFN-24 outline as sufficient proof of interchangeability. Before replacing C8051F317-GM with C8051F316-GM or C8051F311-GM, compare the complete pin list, electrical limits, flash and RAM sizes, peripheral availability, interrupt vectors, clock setup, and compiler configuration. Also verify the meaning of the -GM and -GMR ordering suffixes so the requested production packing method is correct.
Thông tin tuân thủ
The available manufacturer product summary does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for C8051F317-GM. The device is not identified as an automotive-qualified AEC-Q100 variant in the available records.