Silicon Labs

C8051F344-GQ - 25MHz 64KB USB Flash MCU | Silicon Labs

MPN: C8051F344-GQ ✓ چالاک
2.7V to 3.6V Vdss 48-TQFP (7 x 7 mm) Package 25 MHz Speed 64KB (64K x 8 bits) Memory
MOQ: 1 |

C8051F344-GQ گشتی

Silicon Labs C8051F344-GQ is an 8-bit C8051F34x mixed-signal USB Flash microcontroller operating at up to 25MHz, with 64KB (64K x 8) of embedded Flash memory and housed in a 48-pin TQFP package measuring 7 x 7 mm. It is designed for compact control systems requiring USB connectivity, mixed-signal measurement, and embedded Flash-based firmware storage.

An 8051-compatible microcontroller is an embedded processor that combines a CISC instruction set, dedicated I/O, timers, serial interfaces, and on-chip memories in one device. The C8051F34x family belongs to the broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor ICs. Its integrated USB function controller and analog peripherals reduce the need for separate interface components in USB-connected control products.

The C8051F344-GQ provides 64KB of Flash memory, 4.25K x 8 bits of RAM, a 25MHz clock, two comparators, a brown-out detector, and power-on-reset circuitry. Its USB function controller is compliant with USB 2.0. These features suit applications that require local logic, peripheral control, data acquisition, firmware upgrades, and direct USB connectivity within a single 48-TQFP device.

The 8051 core uses a pipelined, high-speed architecture, while the mixed-signal section provides comparators and an internal voltage reference for sensing functions. A 25MHz operating frequency gives the processor 25 million instruction cycles per second, subject to the instruction timing specified by Silicon Labs. The integrated flash permits firmware and constants to be retained without an external memory device, while USB connectivity can reduce the connector count on connected equipment.

Typical uses include USB-to-serial bridges, data acquisition and control panels, industrial instrumentation, consumer peripherals, and compact embedded products that need a deterministic 8-bit control platform. The 48-TQFP package provides enough pins for external interfaces and mixed-signal inputs while supporting automated board assembly. The manufacturer offers related C8051F32x and C8051F34x devices for designs requiring different peripheral combinations or memory configurations.

Power-system design should account for the specified 2.7V to 3.6V operating range and place suitable decoupling close to the supply and ground pins. USB routing requires controlled impedance, short differential traces, solid grounding, and careful separation from noisy analog or switching circuits. Firmware should also configure the brown-out detector and power-on-reset behavior for the intended supply conditions.

This product page combines package, memory, connectivity, and operating information with practical design guidance, application fit, and same-package replacement analysis. It is intended to help engineers identify whether the C8051F344-GQ matches a USB-equipped, Flash-based 8-bit control design before completing schematic, PCB, firmware, and sourcing reviews.

جێگرەوەکانی جێگۆڕکێ بۆ C8051F344-GQ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ C8051F344-GQ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Processor Core, Product Type.

Silicon Labs
Package: 48-pin TQFP, 7 x 7 mm
Processor Core: C8051F34x 8051 core
Product Type: 8-bit mixed-signal microcontroller
بەراوردکردن لەگەڵ C8051F344-GQ →

C8051F340-GQ

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 48-TQFP (7x7)
8-bit mixed-signal microcontroller · C8051F34x 8051 core · 48 MHz · 8 bit · 64 KB · 4.25 KB · 2.7 V to 5.25 V · 10 bit

پەیوەندی بۆ نرخ

بینینی داتاشیت →

C8051F34C-GQ

✅ جێگرەوەی ڕاستەوخۆ
📦 48-TQFP (7x7)
Same C8051F34x 48-TQFP footprint; exact Flash capacity, peripheral population, and USB configuration require verification

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

C8051F345-GQ

✅ جێگرەوەی ڕاستەوخۆ
📦 48-TQFP (7x7)
Related 25MIPS USB Flash MCU in the same 48-TQFP family; memory and peripheral differences may require firmware updates

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

C8051F344-GQ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit mixed-signal USB Flash microcontroller
Processor Core 8051-compatible CISC core
زۆرترین فرێکوێنسیی کاتژمێر 25 MHz
Flash Memory 64KB (64K x 8 bits)
RAM Size 4.25K x 8 bits
Supply Voltage Range 2.7V to 3.6V
مەودای پلەی گەرمیی کارکردن -40°C to +85°C
پاکێج 48-TQFP (7 x 7 mm)
جۆری دامەزراندن Surface mount
Number of Comparators 2
Internal Voltage Reference Available on C8051F340 through C8051F347 variants
USB Function Controller USB 2.0 compliant
USB Transceiver Integrated
Clock Recovery On-chip
Brown-Out Detector Integrated
Power-On Reset Circuitry Integrated
On-Chip Debug Full-speed, non-intrusive in-system debug; no emulator required
Total Pin Count 48 pins

ڕێنمایی ڕێکخستنی پینی C8051F344-GQ 48-tqfp (7 x 7 mm)

ڕێکخستنی پین بۆ C8051F344-GQ (پاکێجی 48-tqfp (7 x 7 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 48-tqfp (7 x 7 mm) بۆ C8051F344-GQ

هیچ داتای وردی پینئاوت بەردەست نییە بۆ C8051F344-GQ.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

C8051F344-GQ گونجاوە بۆ 6 بەکارھێنانs: USB-to-Serial Control Bridge, Industrial Data Acquisition Panel, Programmable Sensor Interface, USB-Enabled Consumer Peripheral, Embedded Automation Controller, Connected Test and Measurement Device.

🔌

USB-to-Serial Control Bridge

The C8051F344-GQ fits a USB-to-serial bridge because it combines a 25MHz 8051-compatible core, 64KB of embedded Flash, 4.25K x 8 bits of RAM, and a USB 2.0 function controller in one 48-TQFP device. The MCU can handle protocol conversion, command parsing, and configuration storage without a separate USB bridge IC. Its integrated USB transceiver and clock recovery reduce the component count, although the board still needs a compliant connector, protection network, and carefully controlled USB traces. Firmware can implement enumeration, serial framing, and device-class identification while retaining the application in internal Flash.

🏭

Industrial Data Acquisition Panel

The C8051F344-GQ is suitable for a compact acquisition panel that must measure analog conditions and forward results through USB. Its two comparators and internal voltage reference support thresholding and basic mixed-signal functions, while the 25MHz core can service digital controls, status indicators, and communication tasks. The 64KB Flash capacity stores calibration constants, configuration data, and application firmware, and 4.25K x 8 bits of RAM supports acquisition buffers. A practical implementation should isolate sensor inputs from digital switching paths and use the manufacturer pin table to select the appropriate analog and ground connections.

🧩

Programmable Sensor Interface

The C8051F344-GQ can act as the local controller for a programmable sensor or instrumentation node. Its 8-bit architecture is appropriate for threshold evaluation, compensation, status reporting, and low-speed configuration commands, while USB provides a convenient connection to a host computer. Two comparators and the internal voltage reference simplify basic alert or measurement functions. With 64KB Flash and 4.25K x 8 bits of RAM, the device can retain lookup tables and run control loops without external memory. Keep analog traces short, provide stable reference bypassing, and confirm unused-pin termination requirements directly against the manufacturer datasheet.

📱

USB-Enabled Consumer Peripheral

The C8051F344-GQ supports compact consumer peripherals that need configuration, local control, and USB connectivity without a high-cost processor. The 48-TQFP package is convenient for automated surface-mount assembly, and 64KB of embedded Flash is sufficient for many control, HID, or communication applications. The USB 2.0 controller, integrated transceiver, and clock recovery simplify the interface, while the brown-out detector and power-on-reset circuitry support dependable startup. Designers should budget USB routing space, maintain a continuous ground reference, and keep power-supply return paths separate from sensitive analog inputs.

🤖

Embedded Automation Controller

The C8051F344-GQ can serve as a compact automation controller for equipment that needs deterministic I/O, local logic, and host connectivity. Its 25MHz 8051-compatible core provides the timing needed for relay logic, status sequencing, and peripheral polling, while 64KB Flash stores the operating program and configuration. The integrated USB function allows a technician to update firmware, retrieve logs, or issue commands from a computer. Brown-out detection is particularly useful for industrial control nodes where an unstable rail could otherwise create invalid outputs. The board must include suitable I/O protection and decoupling appropriate to the loads and wiring environment.

🔬

Connected Test and Measurement Device

The C8051F344-GQ fits compact test equipment that combines sequencing, stimulus control, and result reporting. The 25MHz processor can execute measurement routines, while the two comparators can support simple threshold or go/no-go tests. Internal Flash retains test programs and calibration data, and USB provides a direct connection for automated test sequences or data export. This integration can replace a separate logic controller and USB interface in cost-sensitive instruments. Design the analog measurement section to use quiet supplies and separate ground returns, and use controlled USB impedance plus ESD protection to make the external interface reliable.

What are the key specifications of C8051F344-GQ that engineers should know?
The C8051F344-GQ is an 8-bit, 25MHz C8051F34x mixed-signal Flash microcontroller with 64KB of Flash memory, 4.25K x 8 bits of RAM, USB 2.0 connectivity, two comparators, and a 48-TQFP package. According to the manufacturer datasheet, it operates from 2.7V to 3.6V over -40°C to +85°C and includes an integrated USB transceiver, clock recovery, brown-out detection, power-on reset, and on-chip debug.
Where can I download the C8051F344-GQ datasheet PDF?
The C8051F344-GQ datasheet PDF is available through the Silicon Labs C8051F32x/F34x documentation and the linked manufacturer-hosted copy. It contains the complete electrical characteristics, pin descriptions, memory map, USB interface information, clock requirements, and mixed-signal peripheral details needed to evaluate the device. Use the manufacturer document when assigning PCB nets or checking a pin function.
Where can I find the C8051F344-GQ pinout?
The C8051F344-GQ pinout is found in the pin-description table of the Silicon Labs C8051F34x datasheet. The device uses a 48-pin TQFP package with a 7 x 7 mm body. Use the manufacturer pin table for the exact multiplexed functions, power pins, ground pins, USB data connections, and programming or debug signals when laying out the PCB.
What is the C8051F344-GQ operating voltage range?
The C8051F344-GQ operates from 2.7V to 3.6V. This range applies to the device's VDD supply and should be checked against every external interface, especially USB transceiver signal levels and sensors connected to the analog inputs. The manufacturer datasheet also specifies brown-out detection and power-on-reset circuitry for reliable startup behavior.
How much Flash memory and RAM does the C8051F344-GQ have?
The C8051F344-GQ contains 64KB (64K x 8 bits) of embedded Flash memory and 4.25K x 8 bits of RAM. The Flash provides nonvolatile storage for firmware and constants, while the RAM supports stack, variables, and working data. These values identify the device as a 64KB member of the C8051F34x family.
Does the C8051F344-GQ have USB 2.0 connectivity?
Yes, the C8051F344-GQ includes a USB 2.0-compliant function controller with an integrated transceiver and on-chip clock recovery. This allows a connected product to use USB without a separate USB controller. Board-level implementation still requires careful differential routing, controlled impedance, correct decoupling, and a compliant USB connector and protection strategy.
What can the C8051F344-GQ replace?
The closest documented replacements are C8051F340-GQ, C8051F34C-GQ, and C8051F345-GQ because they belong to the C8051F32x/F34x family and use the same 48-TQFP footprint. Their flash capacity, peripherals, voltage range, and USB configuration must be checked individually before substitution. Firmware and board-level function changes can be required even when the package is identical.
Is C8051F344-GQ pin-compatible with C8051F340-GQ?
C8051F340-GQ is identified by Silicon Labs as a member of the same C8051F32x/F34x device family and is offered as a pin-compatible, functionally equivalent continuity option when Silicon Labs designates it for supply-chain needs. Before replacing C8051F344-GQ, compare memory size, analog peripherals, USB features, pin multiplexing, clocks, and package details in the manufacturer documentation.
C8051F344-GQ vs C8051F345-GQ — which is better for a USB control design?
C8051F344-GQ is the better choice when the design specifically calls for a 64KB Flash C8051F34x device with a 25MHz clock and integrated USB 2.0 function controller. C8051F345-GQ is a related 25MIPS USB Flash option, but its memory and peripheral configuration may differ. Compare the exact datasheet limits and migrate the firmware if C8051F345-GQ is selected.
When should I choose C8051F344-GQ over C8051F34C-GQ?
Choose C8051F344-GQ when the bill of materials specifically requires the F344 configuration, 64KB Flash, 25MHz operation, and its defined USB and mixed-signal feature set. C8051F34C-GQ is a family alternative with the same 48-TQFP format, but its peripheral population or device behavior must be checked. Use the exact ordering-code and datasheet requirements as the final selection criteria.
When should I choose C8051F344-GQ over C8051F340-GQ?
Choose C8051F344-GQ when the required ordering code calls for 64KB Flash and the C8051F344 peripheral configuration. C8051F340-GQ may serve as a continuity replacement selected by Silicon Labs, but it can have different flash size or peripheral availability. Confirm memory, USB, analog functions, and software support before treating it as interchangeable.
What is the best Silicon Labs equivalent for C8051F344-GQ?
C8051F340-GQ is the most directly supported same-family continuity candidate, while C8051F345-GQ and C8051F34C-GQ are other 48-TQFP family options documented in comparison listings. No verified cross-brand, pin-compatible 48-TQFP replacement was identified. Because firmware dependencies and peripheral differences can affect interchangeability, validate any candidate against the complete manufacturer pin and electrical tables.
Where can I buy C8051F344-GQ online?
Use the Request a Quote form on this page to request C8051F344-GQ availability, current commercial terms, and the required quantity. The form is the appropriate purchasing channel for lead-time and allocation questions. Include the 48-TQFP ordering code, target quantity, date code requirements, and any RoHS or traceability documentation needed by your organization.
What is the price of C8051F344-GQ?
The current commercial price for C8051F344-GQ is obtained through the Request a Quote form on this page. Quote requests should state the required quantity, target package code, and whether unopened, date-coded, or traceable material is required. Market pricing can change with supply status, quantity, and packaging, so obtain a current quotation before committing to a BOM.
What is the lead time and stock status for C8051F344-GQ?
Current stock, lead time, and minimum order quantity for C8051F344-GQ should be confirmed through the Request a Quote form on this page. Include your required delivery date and annual usage so the quote can reflect the appropriate production commitment. The device is identified as a C8051F34x 48-TQFP microcontroller with 64KB Flash and a 25MHz clock.

داتای سەرچاوەی ئەندازیاری بۆ C8051F344-GQ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the C8051F344-GQ when a design requires an 8-bit USB Flash controller with a 25MHz clock, 64KB of embedded program memory, 4.25K x 8 bits of RAM, two comparators, and a 48-TQFP footprint. It is particularly suitable for USB-connected control panels, data-acquisition modules, programmable instruments, and compact industrial nodes. Consider C8051F340-GQ only as a Silicon Labs continuity candidate and after confirming its memory and peripheral configuration. Consider C8051F345-GQ when its 25MIPS USB architecture matches the design, but review memory, peripherals, and firmware differences. C8051F34C-GQ may fit same-footprint designs, although its exact Flash capacity, USB functions, and voltage configuration require verification. No verified cross-brand drop-in was identified; changing MCU families should therefore be treated as a redesign rather than a component substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە C8051F340-GQ C8051F34C-GQ C8051F345-GQ
Package 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Product Family C8051F34x C8051F32x/F34x family C8051F34x C8051F34x

جیاکەرەوە سەرەکییەکان

  • Integrated USB connectivity in the same package as the control core (بەراورد بەC8051F340-GQ)
  • Defined 64KB Flash configuration (بەراورد بەC8051F340-GQ)
  • Two comparators with an internal voltage-reference option (بەراورد بەC8051F34C-GQ)
  • Full-speed non-intrusive in-system debugging (بەراورد بەC8051F345-GQ)

تێبینییەکانی دیزاین

Place all supply bypass capacitors directly beside the C8051F344-GQ VDD and ground pins, following the capacitance and voltage requirements in the manufacturer datasheet. Keep the USB differential pair short, continuous, and referenced to an uninterrupted ground plane. Avoid routing USB signals across power-supply switches or analog input networks, and match the physical trace geometry to the impedance required by the completed USB interface.

Separate analog and digital return paths within the PCB stack-up. The comparators and internal voltage reference are intended for low-level sensing, so nearby switching regulators, relays, and high-current outputs can couple into their inputs. Use guarded or grounded analog traces where appropriate, terminate unused analog inputs according to the datasheet, and place an analog reference bypass capacitor close to the relevant supply pin.

Do not assume that all C8051F34x devices with a 48-TQFP package are functionally identical. Before substituting C8051F340-GQ, C8051F34C-GQ, or C8051F345-GQ, verify Flash size, RAM allocation, USB support, comparator availability, internal reference behavior, clock requirements, and alternate pin functions. Changing family members can also alter startup behavior and interrupt mapping, so rebuild and test the firmware rather than changing only the BOM.

Use the 2.7V to 3.6V supply range as a hard design boundary and confirm that USB transceiver, sensor, and digital interface levels are compatible with the selected VDD. Brown-out detection and power-on reset help establish safe operating states, but they do not replace correct rail sequencing or load-transient control. Provide local decoupling and isolate noisy loads so that switching activity cannot pull the MCU supply outside its operating limits.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The operating temperature, package, memory, USB, comparator, debug, voltage, and reset information are listed in product documentation. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or lot documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

C8051F344-GQ datasheet C8051F344-GQ pinout C8051F344-GQ datasheet pdf Silicon Labs C8051F344-GQ C8051F344-GQ 25MHz 64KB C8051F344-GQ 48-TQFP C8051F344-GQ USB application C8051F344-GQ vs C8051F340-GQ C8051F344-GQ drop-in replacement C8051F344-GQ equivalent C8051F344-GQ price C8051F344-GQ stock C8051F344-GQ footprint C8051F34x mixed signal MCU

پێکهاتە و زاراوە پەیوەندیدارەکان

Silicon Labs C8051F344-GQ C8051F34x C8051F340-GQ C8051F34C-GQ C8051F345-GQ 8051-compatible core 8-bit microcontroller mixed-signal microcontroller USB 2.0 USB function controller integrated USB transceiver on-chip clock recovery embedded Flash memory 64KB Flash 4.25K x 8-bit RAM brown-out detector power-on reset on-chip debug comparator internal voltage reference 48-TQFP TQFP package family surface-mount package industrial automation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ