C8051F344-GQ - 25MHz 64KB USB Flash MCU | Silicon Labs
部品番号: C8051F344-GQ ✓ 生産中C8051F344-GQ 概要
An 8051-compatible microcontroller is an embedded processor that combines a CISC instruction set, dedicated I/O, timers, serial interfaces, and on-chip memories in one device. The C8051F34x family belongs to the broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor ICs. Its integrated USB function controller and analog peripherals reduce the need for separate interface components in USB-connected control products.
The C8051F344-GQ provides 64KB of Flash memory, 4.25K x 8 bits of RAM, a 25MHz clock, two comparators, a brown-out detector, and power-on-reset circuitry. Its USB function controller is compliant with USB 2.0. These features suit applications that require local logic, peripheral control, data acquisition, firmware upgrades, and direct USB connectivity within a single 48-TQFP device.
The 8051 core uses a pipelined, high-speed architecture, while the mixed-signal section provides comparators and an internal voltage reference for sensing functions. A 25MHz operating frequency gives the processor 25 million instruction cycles per second, subject to the instruction timing specified by Silicon Labs. The integrated flash permits firmware and constants to be retained without an external memory device, while USB connectivity can reduce the connector count on connected equipment.
Typical uses include USB-to-serial bridges, data acquisition and control panels, industrial instrumentation, consumer peripherals, and compact embedded products that need a deterministic 8-bit control platform. The 48-TQFP package provides enough pins for external interfaces and mixed-signal inputs while supporting automated board assembly. The manufacturer offers related C8051F32x and C8051F34x devices for designs requiring different peripheral combinations or memory configurations.
Power-system design should account for the specified 2.7V to 3.6V operating range and place suitable decoupling close to the supply and ground pins. USB routing requires controlled impedance, short differential traces, solid grounding, and careful separation from noisy analog or switching circuits. Firmware should also configure the brown-out detector and power-on-reset behavior for the intended supply conditions.
This product page combines package, memory, connectivity, and operating information with practical design guidance, application fit, and same-package replacement analysis. It is intended to help engineers identify whether the C8051F344-GQ matches a USB-equipped, Flash-based 8-bit control design before completing schematic, PCB, firmware, and sourcing reviews.
ドロップイン代替品: C8051F344-GQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: C8051F344-GQ (同一形状・フットプリント) — 相違点: Package, Processor Core, Product Type.
C8051F340-GQ
✅ ドロップイン価格はお問い合わせください
データシートを見る →C8051F34C-GQ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F345-GQ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F344-GQ 最大定格&電気的特性
| Product Type | 8-bit mixed-signal USB Flash microcontroller |
| Processor Core | 8051-compatible CISC core |
| 最大クロック周波数 | 25 MHz |
| Flash Memory | 64KB (64K x 8 bits) |
| RAM Size | 4.25K x 8 bits |
| Supply Voltage Range | 2.7V to 3.6V |
| 動作温度範囲 | -40°C to +85°C |
| パッケージ | 48-TQFP (7 x 7 mm) |
| 実装タイプ | Surface mount |
| Number of Comparators | 2 |
| Internal Voltage Reference | Available on C8051F340 through C8051F347 variants |
| USB Function Controller | USB 2.0 compliant |
| USB Transceiver | Integrated |
| Clock Recovery | On-chip |
| Brown-Out Detector | Integrated |
| Power-On Reset Circuitry | Integrated |
| On-Chip Debug | Full-speed, non-intrusive in-system debug; no emulator required |
| Total Pin Count | 48 pins |
C8051F344-GQ 48-tqfp (7 x 7 mm) ピン配置ガイド
C8051F344-GQ (48-tqfp (7 x 7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F344-GQ.
詳細は データシート をご参照ください。
主な用途
C8051F344-GQ の用途: 6 件s: USB-to-Serial Control Bridge, Industrial Data Acquisition Panel, Programmable Sensor Interface, USB-Enabled Consumer Peripheral, Embedded Automation Controller, Connected Test and Measurement Device.
USB-to-Serial Control Bridge
The C8051F344-GQ fits a USB-to-serial bridge because it combines a 25MHz 8051-compatible core, 64KB of embedded Flash, 4.25K x 8 bits of RAM, and a USB 2.0 function controller in one 48-TQFP device. The MCU can handle protocol conversion, command parsing, and configuration storage without a separate USB bridge IC. Its integrated USB transceiver and clock recovery reduce the component count, although the board still needs a compliant connector, protection network, and carefully controlled USB traces. Firmware can implement enumeration, serial framing, and device-class identification while retaining the application in internal Flash.
おすすめ
Industrial Data Acquisition Panel
The C8051F344-GQ is suitable for a compact acquisition panel that must measure analog conditions and forward results through USB. Its two comparators and internal voltage reference support thresholding and basic mixed-signal functions, while the 25MHz core can service digital controls, status indicators, and communication tasks. The 64KB Flash capacity stores calibration constants, configuration data, and application firmware, and 4.25K x 8 bits of RAM supports acquisition buffers. A practical implementation should isolate sensor inputs from digital switching paths and use the manufacturer pin table to select the appropriate analog and ground connections.
おすすめ
Programmable Sensor Interface
The C8051F344-GQ can act as the local controller for a programmable sensor or instrumentation node. Its 8-bit architecture is appropriate for threshold evaluation, compensation, status reporting, and low-speed configuration commands, while USB provides a convenient connection to a host computer. Two comparators and the internal voltage reference simplify basic alert or measurement functions. With 64KB Flash and 4.25K x 8 bits of RAM, the device can retain lookup tables and run control loops without external memory. Keep analog traces short, provide stable reference bypassing, and confirm unused-pin termination requirements directly against the manufacturer datasheet.
おすすめ
USB-Enabled Consumer Peripheral
The C8051F344-GQ supports compact consumer peripherals that need configuration, local control, and USB connectivity without a high-cost processor. The 48-TQFP package is convenient for automated surface-mount assembly, and 64KB of embedded Flash is sufficient for many control, HID, or communication applications. The USB 2.0 controller, integrated transceiver, and clock recovery simplify the interface, while the brown-out detector and power-on-reset circuitry support dependable startup. Designers should budget USB routing space, maintain a continuous ground reference, and keep power-supply return paths separate from sensitive analog inputs.
おすすめ
Embedded Automation Controller
The C8051F344-GQ can serve as a compact automation controller for equipment that needs deterministic I/O, local logic, and host connectivity. Its 25MHz 8051-compatible core provides the timing needed for relay logic, status sequencing, and peripheral polling, while 64KB Flash stores the operating program and configuration. The integrated USB function allows a technician to update firmware, retrieve logs, or issue commands from a computer. Brown-out detection is particularly useful for industrial control nodes where an unstable rail could otherwise create invalid outputs. The board must include suitable I/O protection and decoupling appropriate to the loads and wiring environment.
おすすめ
Connected Test and Measurement Device
The C8051F344-GQ fits compact test equipment that combines sequencing, stimulus control, and result reporting. The 25MHz processor can execute measurement routines, while the two comparators can support simple threshold or go/no-go tests. Internal Flash retains test programs and calibration data, and USB provides a direct connection for automated test sequences or data export. This integration can replace a separate logic controller and USB interface in cost-sensitive instruments. Design the analog measurement section to use quiet supplies and separate ground returns, and use controlled USB impedance plus ESD protection to make the external interface reliable.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F344-GQ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | C8051F340-GQ | C8051F34C-GQ | C8051F345-GQ |
|---|---|---|---|---|
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Product Family | C8051F34x | C8051F32x/F34x family | C8051F34x | C8051F34x |
主な差別化要因
- Integrated USB connectivity in the same package as the control core (vs C8051F340-GQ)
- Defined 64KB Flash configuration (vs C8051F340-GQ)
- Two comparators with an internal voltage-reference option (vs C8051F34C-GQ)
- Full-speed non-intrusive in-system debugging (vs C8051F345-GQ)
設計ノート
Place all supply bypass capacitors directly beside the C8051F344-GQ VDD and ground pins, following the capacitance and voltage requirements in the manufacturer datasheet. Keep the USB differential pair short, continuous, and referenced to an uninterrupted ground plane. Avoid routing USB signals across power-supply switches or analog input networks, and match the physical trace geometry to the impedance required by the completed USB interface.
Separate analog and digital return paths within the PCB stack-up. The comparators and internal voltage reference are intended for low-level sensing, so nearby switching regulators, relays, and high-current outputs can couple into their inputs. Use guarded or grounded analog traces where appropriate, terminate unused analog inputs according to the datasheet, and place an analog reference bypass capacitor close to the relevant supply pin.
Do not assume that all C8051F34x devices with a 48-TQFP package are functionally identical. Before substituting C8051F340-GQ, C8051F34C-GQ, or C8051F345-GQ, verify Flash size, RAM allocation, USB support, comparator availability, internal reference behavior, clock requirements, and alternate pin functions. Changing family members can also alter startup behavior and interrupt mapping, so rebuild and test the firmware rather than changing only the BOM.
Use the 2.7V to 3.6V supply range as a hard design boundary and confirm that USB transceiver, sensor, and digital interface levels are compatible with the selected VDD. Brown-out detection and power-on reset help establish safe operating states, but they do not replace correct rail sequencing or load-transient control. Provide local decoupling and isolate noisy loads so that switching activity cannot pull the MCU supply outside its operating limits.
コンプライアンス情報
The operating temperature, package, memory, USB, comparator, debug, voltage, and reset information are listed in product documentation. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or lot documentation.