Harris Corporation

CD4024AD3 - 7-Bit CMOS Binary Counter | Harris | CDIP-14

MPN: CD4024AD3 ✓ چالاک
3 V to 12 V Vdss 14-CDIP Package Negative edge Speed
MOQ: 1 |

CD4024AD3 گشتی

The Harris Corporation CD4024AD3 is a 7-bit asynchronous, negative-edge-triggered, up-counting binary counter built with CMOS logic and supplied in a 14-pin CDIP package. It operates across a 3 V to 12 V supply range and provides one counter element with seven binary output stages. The device belongs to the 4000, 14000, and 40000 CMOS logic family, where a counter is a sequential logic circuit that changes its binary state when triggered.

A binary counter is a type of counter IC that stores and advances a multi-bit binary number. The CD4024AD3 uses an asynchronous ripple-carry counting architecture: each output stage changes after the preceding stage, allowing successive binary states to appear across the seven outputs. Negative-edge triggering means the count advances on the high-to-low transition of the clock input rather than its low-to-high transition. This behavior must be considered when defining reset timing and external clock-conditioning circuits.

The principal features of the CD4024AD3 include seven counter outputs, negative-edge clock triggering, asynchronous counting, and operation from 3 V to 12 V. Because it uses CMOS technology, the circuit is suitable for low-voltage digital systems in which supply current, logic thresholds, and integration density are important considerations. The parallel binary outputs provide a direct representation of the current count from 0 through 127, simplifying connections to displays, decoders, programmable controllers, or other digital subsystems.

The 14-CDIP package provides through-hole access to the counter, clock, reset, and output functions. Its lead spacing supports conventional PCB layouts and socketed assemblies rather than fine-pitch surface mounting. Pin assignments should be taken from the Harris CD4024AD3 datasheet when assigning PCB tracks, especially because adjacent counter stages may be brought out in a non-sequential physical order. The asynchronous ripple architecture is straightforward for low-to-moderate clock rates, but propagation delay accumulates through the seven stages and should be checked against the maximum system clock requirement.

Typical uses include digital frequency division, event-counting modules, timing dividers, industrial control logic, laboratory counters, and educational digital-logic systems. The part can divide an incoming pulse train by 2, 4, 8, 16, 32, 64, or 128 by observing the corresponding output stage. It is also useful when a controller requires a binary state that can be read in parallel rather than decoded from a one-hot sequence.

For reliable circuit design, use a clean clock edge and account for cumulative ripple delay before using the most significant output as a high-frequency timing reference. Reset should be asserted long enough to establish a defined starting state, and unused inputs must be held at valid CMOS logic levels. Because a CDIP package exposes long leads, pay particular attention to lead clearance, soldering temperature, and protection from electrostatic discharge during handling.

This product record combines the verified Harris CD4024AD3 ordering description, electrical classifications, package information, sourcing observations, and practical implementation guidance. It also identifies where a true pin-compatible replacement must be confirmed instead of treating a functionally similar counter as an automatic drop-in substitute. Engineers can use the comparison and validation guidance below to evaluate board-level compatibility, timing margins, lifecycle risk, and sourcing requirements before approving an alternative.

جێگرەوەکانی جێگۆڕکێ بۆ CD4024AD3 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

CD4024AD3 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Counter Type Binary asynchronous up counter
Number of Counter Elements 1 element
Counter Resolution 7 bits
Clock Edge Sensitivity Negative edge
Logic Level CMOS
Supply Voltage Range 3 V to 12 V
Counting Direction Up
ژمارەی دەرچووەکان 7 binary outputs
Maximum Count 127
Counting Architecture Asynchronous ripple carry
Logic Family 4000/14000/40000 CMOS series
Package Type 14-CDIP
جۆری دامەزراندن Through-hole
Lead Spacing 7.62 mm

ڕێنمایی ڕێکخستنی پینی CD4024AD3 14-cdip

ڕێکخستنی پین بۆ CD4024AD3 (پاکێجی 14-cdip). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 14-cdip بۆ CD4024AD3

هیچ داتای وردی پینئاوت بەردەست نییە بۆ CD4024AD3.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

CD4024AD3 گونجاوە بۆ 6 بەکارھێنانs: Digital Frequency Divider, Industrial Event Counter, Programmable Timer and Retrigger, Binary State Decoder Interface, Laboratory Pulse-Counting Module, Legacy Digital Control System.

⚡

Digital Frequency Divider

The CD4024AD3 works as a programmable frequency divider because its seven counter outputs provide division ratios of 2, 4, 8, 16, 32, 64, and 128. A clock applied to the negative-edge-triggered input advances the asynchronous ripple counter, while the selected Q output produces the divided waveform. This arrangement is useful in timing generators, pulse-rate reducers, and clock-polling systems. The principal design consideration is cumulative propagation delay across the seven stages. For high-ratio outputs, the most significant stage has the greatest settling delay, so verify the maximum source frequency and required output duty-cycle accuracy against the manufacturer timing data before treating the divided signal as a precision reference.

🏭

Industrial Event Counter

The CD4024AD3 can count discrete events from sensors, switches, or machine-position encoders and present the total as a seven-bit parallel value. Each accepted negative clock transition advances the count, allowing a controller to read the accumulated state after a defined interval. Its CMOS 3 V to 12 V operating range supports common industrial logic levels, while the 14-CDIP package simplifies through-hole construction and field replacement. In industrial environments, protect switch and sensor inputs from bounce, contact noise, and transients. Reset timing and the maximum event rate must also be checked so that the controller never samples during the ripple transitions of the counter stages.

⏱️

Programmable Timer and Retrigger

The seven binary outputs of the CD4024AD3 allow a retriggerable timer to be built by combining the counter with combinational decoding logic. A pulse resets the counter, and a decoded output indicates a selected count interval, after which the next clock edge returns the circuit toward its next timing cycle. This approach supports variable delays selected by changing the decode taps. Because the CD4024AD3 is an asynchronous ripple counter, decode transitions can momentarily propagate through more than one state. Debounce or qualify each decoded output if the load must never observe a false pulse, and include the reset-release and clock-period margin in the timing budget.

🖥️

Binary State Decoder Interface

The CD4024AD3 provides a natural interface between sequential events and parallel logic. Its seven outputs can feed decoders, display drivers, multiplexers, comparators, or programmable controllers that need a binary count rather than a pulse train. A change on a selected clock edge updates the output word, making the device suitable for position-step sequencing and mode selection in control systems. Engineers should sample only after the relevant output stages have settled, or register the outputs in a flip-flop bank. The 14-CDIP outline also makes the counter practical for legacy controller boards where a socketed or repairable logic section is preferable to a fine-pitch surface-mount device.

🧪

Laboratory Pulse-Counting Module

The CD4024AD3 can serve as the counting element in a laboratory pulse-counter module, replacing a larger mechanical counter when the input is clean and the required count range does not exceed 127. Its parallel outputs simplify display multiplexing, comparison, and data logging, while the negative-edge trigger can be aligned with pulse sources that define timing on the falling edge. Input conditioning should prevent contact bounce, ringing, and amplitude variations from causing multiple counts. For bench equipment, the through-hole package is convenient to socket, replace, and inspect. Confirm the counter's maximum clock frequency and output settling behavior before using it with fast pulse generators or long cable runs.

🔧

Legacy Digital Control System

The CD4024AD3 is appropriate for repair and extension of legacy CMOS control systems that already use 14-CDIP logic and require a binary up-counter. Its 3 V to 12 V supply compatibility supports several generations of transistor-transistor and CMOS logic interfaces, provided signal levels meet the CD4000-family input thresholds. The through-hole package allows direct board-level replacement where a modern surface-mount counter would require layout changes. Engineers should first compare the full pin table, negative-edge triggering, reset polarity, and output order with the failed device. Also review counter speed and temperature specifications because older control boards may be noise-sensitive and operate at elevated temperatures.

کورتەی بەرهەمە پێشنیارکراوەکان

CD4024AD Related 4000-series seven-bit counter family member بەکارهێنراوە لە: Digital Frequency Divider, Industrial Event Counter, Programmable Timer and Retrigger, Binary State Decoder Interface, Laboratory Pulse-Counting Module, Legacy Digital Control System
What is the CD4024AD3?
The CD4024AD3 is a Harris Corporation 7-bit CMOS binary counter that counts upward on the negative transition of its clock input. According to the Harris CD4024AD3 ordering description, it is an asynchronous 4000/14000/40000-series counter in a 14-pin CDIP package. Its seven parallel outputs can represent binary counts from 0 through 127, making it suitable for frequency division, event counting, and programmable digital timing.
What is the operating voltage of CD4024AD3?
The CD4024AD3 operates from 3 V to 12 V. The Texas Instruments CD4024 listing associated with this family identifies the same counter function and a 3 V to 12 V range. When using the Harris CD4024AD3, verify input thresholds and output levels at the actual supply voltage because the CD4000-family input transition limits vary with VDD. Decoupling and unused-input handling should follow the logic-family recommendations in the manufacturer datasheet.
How does the CD4024AD3 count?
The CD4024AD3 advances its seven-bit count on each negative, or high-to-low, clock edge. The Harris ordering description identifies it as a negative-edge-triggered, upward-counting, asynchronous binary counter. Its seven output stages cover counts from 0 to 127. Because the internal stages operate as a ripple chain, the settling delay of the complete counter increases across the successive output stages and must be included in high-speed timing analysis.
What are the key specifications of CD4024AD3 engineers should know?
The CD4024AD3 combines a 7-bit counter, negative-edge triggering, asynchronous operation, CMOS logic, a 3 V to 12 V supply range, and a 14-CDIP package. According to the Harris CD4024AD3 product description, one counter element is provided and the count advances in the up direction. These characteristics make the device a straightforward frequency divider or parallel binary event counter when board space, through-hole assembly, and moderate operating speed are acceptable.
Where can I find the CD4024AD3 datasheet PDF?
The CD4024AD3 datasheet can be reached through the linked CD4024 PDF document for the 4000-series CMOS ripple-carry binary counter. The Harris ordering description identifies CD4024AD3 as a 7-bit, negative-edge-triggered, asynchronous, up-counting CMOS counter in a 14-CDIP package. Use the manufacturer's pin-description and electrical-characteristics tables when assigning PCB connections and setting clock and reset timing.
Where is the CD4024AD3 pinout located?
The CD4024AD3 pinout is documented in the manufacturer datasheet rather than in the product-search listing. The Harris CD4024AD3 description confirms a 14-CDIP package, which includes the clock, reset, and seven counter-output functions. Assign PCB tracks directly from the package drawing and pin table, and do not infer the physical order of the seven outputs from their binary significance. This avoids routing errors caused by assuming that output numbering follows Q0 through Q6.
Can CD4024AD3 replace CD4024AD?
A CD4024AD cannot be treated as a confirmed drop-in replacement for the CD4024AD3 without comparing the exact Harris pin table, grade, and ordering suffix. Both names appear in connection with the CD4024 counter family, but matching the CDIP-14 outline alone does not prove electrical or pin compatibility. Before substitution, verify supply range, clock-edge behavior, reset polarity and timing, output ordering, propagation delay, temperature grade, and the manufacturer datasheet for the exact suffix.
What can replace CD4024AD3 on the same PCB?
No substitute should be called a true drop-in replacement for the CD4024AD3 until its exact 14-CDIP pinout and electrical behavior have been confirmed. The verified CD4000-series cross-reference information identifies the CD4024 family but does not establish a qualified replacement with matching suffix. Candidate parts should be checked against the Harris datasheet for pin order, negative-edge triggering, asynchronous timing, reset behavior, supply voltage, and output propagation delay.
What is the best Texas Instruments equivalent for CD4024AD3?
The closest Texas Instruments family candidate is the CD4024AD, but it should be treated as a review candidate rather than an automatically qualified drop-in replacement. The CD4024 family is a 7-stage CMOS ripple-carry binary counter with negative-edge counting, and the CD4024AD listing is explicitly associated with that family. Final approval requires an exact 14-CDIP pin-table comparison against the Harris CD4024AD3 and confirmation of grade, timing, reset, and lifecycle requirements.
When should I choose CD4024AD3 over a surface-mount counter?
Choose the CD4024AD3 when a through-hole 14-CDIP footprint, seven parallel outputs, negative-edge counting, and operation across 3 V to 12 V are the priorities. Its CDIP package is useful for sockets, prototypes, repair assemblies, and designs with manual inspection requirements. A surface-mount counter may be preferable when board area, automated assembly, higher switching performance, or additional logic functions matter more than through-hole accessibility.
Is CD4024AD3 suitable for a divide-by-128 clock circuit?
Yes, the CD4024AD3 is functionally suitable for divide-by-128 operation by using its most significant of seven binary outputs as the divided clock. The device counts upward from 0 through 127 and changes state on a negative clock edge. Verify that the maximum input frequency and cumulative output transition delay support the required duty cycle and settling time, and account for clock asymmetry introduced by the ripple-counter architecture.
How should the CD4024AD3 reset circuit be designed?
The CD4024AD3 reset network must pull the reset input to its required valid CMOS logic level and hold it long enough to establish a defined count before clocks resume. Use the manufacturer pin description to determine the exact reset function and active level for the Harris suffix. Keep the reset trace short, avoid noisy digital signals, and account for the time required for all seven asynchronous stages to settle after reset release.
Does CD4024AD3 have RoHS or REACH compliance?
The RoHS and REACH status of the Harris CD4024AD3 must be confirmed from the current manufacturer declaration or product documentation for the exact suffix. The Harris ordering description establishes the device as a CMOS 14-CDIP binary counter but does not state environmental-compliance certification. Do not infer compliance solely from its age or from a generic CD4000-family designation. Record the applicable declaration in the product approval file before release.
Is the CD4024AD3 currently lifecycle active?
The CD4024AD3 is treated as active for this record because current distributor and catalog listings identify the exact Harris part number and 14-CDIP configuration. The Harris ordering description does not publish a lifecycle-status statement, so procurement should periodically confirm ongoing availability rather than assuming indefinite supply. For production planning, use the Request a Quote form on this page to request current lot availability and lead time for the exact suffix.
Where can I buy CD4024AD3 and what is the lead time?
Use the Request a Quote form on this page to request the current CD4024AD3 price, stock, minimum order quantity, and lead time from XAIPART. The exact MPN is a Harris 7-bit, negative-edge-triggered CMOS counter in a 14-CDIP package. Current distributor presence does not guarantee a specific production allocation, so request a written quotation for the quantity, date code, and inspection requirements needed for the assembly.

داتای سەرچاوەی ئەندازیاری بۆ CD4024AD3 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the Harris CD4024AD3 for a through-hole design that requires a 7-bit, negative-edge-triggered, up-counting CMOS counter operating from 3 V to 12 V. Its 14-CDIP format is especially useful for legacy repair, socketed assemblies, and manually inspected industrial boards. The related CD4024AD should be selected only after its exact pin table, timing grade, reset behavior, lifecycle status, and manufacturer documentation have been compared with the Harris part. Avoid substituting a 16-pin HC-series counter or another surface-mount counter merely because its frequency range is higher; differences in pin count, output order, and trigger polarity can require PCB changes. For designs with demanding clock speed or strict output-settling requirements, choose a modern counter after comparing propagation delay and maximum frequency rather than assuming the ripple architecture is adequate.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Package 14-CDIP
Brand Harris Corporation
Counter Resolution 7 bits
Counter Elements 1 element
Counting Direction Up
Clock Edge Negative edge
Counting Architecture Asynchronous ripple carry
Logic Technology CMOS
Supply Voltage Range 3 V to 12 V
Maximum Binary Count 127

جیاکەرەوە سەرەکییەکان

  • Seven-bit count with parallel binary outputs (بەراورد بەCD4024AD)
  • Defined negative-edge counting behavior (بەراورد بەCD4024AD)
  • Through-hole 14-CDIP construction (بەراورد بەCD4024AD)

تێبینییەکانی دیزاین

Treat the CD4024AD3 clock as a sensitive asynchronous timing input. Keep the driver close to the clock pin, use a short return path, and avoid routing the clock beside noisy switching nodes. If the source is mechanical or a long cable, add conditioning to prevent contact bounce, ringing, and multiple negative-edge detections. The triggering edge is specifically negative, so the timing diagram must align reset and source pulses with the falling transition rather than assuming rising-edge behavior.

Assign every connection from the Harris CD4024AD3 pin-description table rather than assuming that Q0 through Q6 appear in numerical order around the 14-CDIP outline. Route the seven outputs according to their logical function and keep clock and reset traces away from sensitive analog or high-current switching paths. Use a ground plane where practical, place input conditioning close to the clock pin, and provide local supply bypassing. The long CDIP leads make careful lead-bend radius and soldering practice important during manual assembly.

Do not sample the binary outputs immediately after a clock edge if the downstream circuit requires a settled word. Asynchronous ripple propagation means the seven stages do not change simultaneously. Add a sampling delay, register the outputs, or decode only stages that have met their settling requirements. Also verify reset polarity and minimum reset duration from the manufacturer datasheet. A reset that is too short may leave different stages in different states, producing an invalid intermediate count.

The verified device specification establishes a 3 V to 12 V operating range, but maximum input-current, dynamic-current, and power-dissipation figures are not stated in the product record. Before committing to a supply rail, review those characteristics in the manufacturer datasheet and include CMOS transition-current demand from all seven outputs. Place the decoupling capacitor at the device supply pins, maintain a low-impedance return path, and avoid sharing a long supply route with unrelated switching loads that could produce rail disturbance during count transitions.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The Harris CD4024AD3 product description does not provide RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declarations. AEC-Q100 status is recorded as not qualified because this legacy CMOS logic device is not identified as an automotive-qualified variant.

داتا پشتڕاستکراوەتەوە لە: 2026-11-15 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

CD4024AD3 datasheet CD4024AD3 pinout CD4024AD3 datasheet pdf CD4024AD3 equivalent CD4024AD3 replacement CD4024AD3 drop-in substitute CD4024AD3 CDIP-14 counter CD4024AD3 7-bit binary counter CD4024AD3 3V 12V CMOS CD4024AD3 negative edge counter CD4024AD3 price CD4024AD3 stock Harris CD4024AD3 CD4024AD3 vs CD4024AD CD4024AD3 frequency divider circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Harris Corporation CD4024AD3 CD4024AD CD4024 7-bit binary counter logic IC CMOS logic CD4000 series 4000/14000/40000 series asynchronous counter ripple-carry counter negative-edge trigger binary counter frequency divider event counter parallel binary output 14-CDIP package through-hole package 7.62 mm lead spacing supply voltage maximum count 127 digital control system timing reset legacy logic repair
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ