CD4029BMT - 4-Bit Up/Down Counter | Texas Instruments
MPN: CD4029BMT ✓ چالاکCD4029BMT گشتی
A CMOS counter is a synchronous digital logic device that increments or decrements a binary or BCD-decade state on an active clock edge. The CD4029B belongs to the broader counter and divider logic category, which sits within CMOS logic, digital logic ICs, and general-purpose semiconductor control. Its bidirectional architecture consolidates two counting directions and programmable initialization into one package, reducing the number of separate counter components required by a system.
Key features include a 4-bit counting width, selectable binary or decade operation, positive-edge triggering, and separate up/down, binary/decade, preset-enable, and carry-in controls. According to the Texas Instruments product information, it is a versatile CMOS up/down counter designed for digital counting and control applications. The 16-SOIC package also makes it suitable for conventional surface-mount PCB assembly.
The counter can represent either a 0-to-15 binary sequence or a 0-to-9 BCD-decade sequence. Preset inputs allow a known starting value to be loaded before counting begins, while the carry and carry-out paths support cascaded stages in larger counters. These functions make the device more adaptable than a simple fixed-direction binary counter. Exact voltage limits, operating-temperature limits, propagation delays, and current ratings require confirmation from the manufacturer datasheet before production release.
Typical applications include bidirectional event counters, programmable sequence controllers, industrial timing modules, digital position or motion indicators, test equipment, and control logic that must count toward or away from a preset boundary. Multiple counter stages can also be cascaded when a system requires more than four counting bits. The appropriate selection criteria are logic compatibility, clock requirements, preset behavior, and package availability.
PCB implementation should follow the manufacturer pin description and recommended operating rules. Because logic-counter timing depends on clock-edge behavior and propagation delay, route the clock and control traces away from noisy switching nodes, provide a stable supply reference, and account for unused inputs according to the datasheet guidance. Do not infer input states from family naming conventions; use the exact CD4029B datasheet during schematic capture and verification.
This product page combines manufacturer-level device identification, verified distributor package and pricing observations, compatible same-family alternatives, parameter comparisons, and practical implementation guidance. It is intended to accelerate initial engineering selection while directing final electrical and pin-level validation to the authoritative CD4029B documentation.
جێگرەوەکانی جێگۆڕکێ بۆ CD4029BMT — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
CD4029BM
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CD4029BMG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4029BEE4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4029BF3A
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4029BMT زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Manufacturer | Texas Instruments |
| Device Type | CMOS presettable up/down counter |
| Counter Width | 4 bit |
| Counting Modes | Binary or BCD decade |
| Count Direction | Up or down |
| Clock Edge | Positive edge |
| Logic Family | CMOS |
| پاکێج | 16-SOIC, 0.154 inch body width, 3.90 mm width |
| ژمارەی پین | 16 pin |
| جۆری دامەزراندن | Surface mount |
| Preset Function | Yes |
| Carry Input | Yes |
| Carry Output | Yes |
| JEDEC Description Standard | JEDEC Tentative Standard No. 13B, Standard Specifications for Description of B Series CMOS Devices |
ڕێنمایی ڕێکخستنی پینی CD4029BMT 16-soic, 0.154 inch body width, 3.90 mm width
ڕێکخستنی پین بۆ CD4029BMT (پاکێجی 16-soic, 0.154 inch body width, 3.90 mm width). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CD4029BMT.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CD4029BMT گونجاوە بۆ 6 بەکارھێنانs: Bidirectional Event Counter, Programmable Sequence Controller, Industrial Timing Module, Position And Motion Indicator, Cascaded Multi-Bit Counter, Digital Test Equipment Counter.
Bidirectional Event Counter
The CD4029BMT fits bidirectional event counting because its 4-bit counter can increment or decrement on a positive clock edge and can switch between binary and BCD-decade formats. Use the direction control to distinguish events accumulating toward a limit from events removing from that limit. The preset inputs allow a known count to be restored after a reset or maintenance interval. When cascading additional stages, include the carry path in timing analysis and verify propagation-delay limits from the manufacturer datasheet. This arrangement is useful for production counters, access-control totals, and process-event logging where both additions and removals must be represented.
پێشنیارکراو
Programmable Sequence Controller
The CD4029BMT supports programmable sequencing because its 4-bit output can be loaded through the preset controls and then advanced in either direction. A controller can establish a boundary, count toward or away from it, and trigger a downstream action when the carry output changes state. Binary mode provides 16 states, while BCD-decade mode provides 10 states for decimal-oriented displays or timing intervals. The implementation should account for clock-edge ordering, preset-enable timing, and any required initialization of control inputs according to the manufacturer pin and timing tables.
پێشنیارکراو
Industrial Timing Module
The CD4029BMT can serve as the timing-state element in an industrial module that counts fixed intervals, retriggers a preset duration, or tracks remaining operating time. Its 4-bit width and selectable binary or BCD-decade mode allow direct representation of short timing states, while the carry and preset functions support repeatable sequences. The primary engineering considerations are maximum clock rate, supply compatibility, and propagation delay under the intended load. Confirm these parameters in the CD4029B datasheet and avoid using family-level ratings as a substitute for grade-specific limits.
پێشنیارکراو
Position And Motion Indicator
The CD4029BMT is appropriate for simple position or motion indication because it counts in either direction from a preset reference point. Forward motion can increment the state while reverse motion decrements it, allowing the controller to compare the count with a target position. BCD-decade mode is convenient when the count must map directly to decimal display logic, while binary mode provides all 16 four-bit states. Reliability depends on debouncing mechanical or noisy sensor events before they reach the clock input and on respecting the prescribed logic levels and setup timing.
پێشنیارکراو
Cascaded Multi-Bit Counter
The CD4029BMT can be used as one stage of a cascaded counter when a system needs more resolution than its native 4-bit state. Carry inputs and carry outputs permit multiple stages to form a larger counting range, provided timing and clock distribution are designed correctly. The compact 16-SOIC package reduces board area compared with discrete flip-flop implementations, although each stage adds propagation delay. Use a common, low-skew clock source and verify the cumulative timing against the manufacturer operating limits. This architecture suits totalizers, multistage timers, and digital event accumulators.
پێشنیارکراو
Digital Test Equipment Counter
The CD4029BMT can implement a compact test-point or pulse-counting function in digital test equipment. A positive-edge clock accepts counted events, while the up/down capability supports tests that count both accepted and rejected events. The four-bit output can be read by a controller, compared with a preset boundary, or extended with another counter stage. For reliable measurements, define the maximum event rate, account for propagation delay, and keep the clock away from high-energy switching nodes. The exact operating range and timing margins must come from the exact manufacturer documentation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CD4029BMT — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CD4029BM | CD4029BMG4 | CD4029BEE4 | CD4029BF3A |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Counter Width | 4 bit | 4 bit | 4 bit | 4 bit | 4 bit |
| Counting Mode | Binary or BCD decade | Binary or BCD decade | Binary or BCD decade | Binary or BCD decade | Binary or BCD decade |
| Count Direction | Up or down | Up or down | Up or down | Up or down | Up or down |
| Logic Technology | CMOS | CMOS | CMOS | CMOS | CMOS |
| Preset Support | Yes | Yes | Yes | Yes | Yes |
جیاکەرەوە سەرەکییەکان
- Combines four-bit binary and decade counting with bidirectional operation (بەراورد بەCD4029BM)
- Uses the established 16-SOIC footprint for compact surface-mount assembly (بەراورد بەCD4029BMG4)
- Supports programmable initialization through individual preset inputs (بەراورد بەCD4029BEE4)
- Supports positive-edge counting with carry paths for expansion (بەراورد بەCD4029BF3A)
تێبینییەکانی دیزاین
Do not substitute a CD4029 family part solely because it uses a 16-SOIC outline. Compare the exact pin description, supply-voltage range, operating-temperature grade, clock-edge definition, and qualification status for every ordering suffix. The CD4029BM, CD4029BMG4, CD4029BEE4, and CD4029BF3A alternatives share the package format and 4-bit function, but suffix-specific limits still require manufacturer verification before production use.
Route the clock as a clean, low-skew digital signal and keep it away from switching-node copper and high-current return paths. Debounce any mechanical or slow-contact event source before allowing it to clock the counter, because multiple transitions can be counted as separate events. If several counters are cascaded, distribute the clock with matched geometry and evaluate cumulative propagation delay against the fastest intended operating rate.
Use the exact CD4029B 16-SOIC land pattern and assign every net according to the manufacturer pin-configuration table. Place the device near the signals it counts, keep preset and direction traces short where practical, and provide a low-impedance ground reference. Validate unused-input states, power-up behavior, and reset sequencing in both hardware and the production schematic review.
Confirm the exact supply range and input-current limits for the selected ordering suffix rather than applying limits from another CD4000-series device. Check logic-level compatibility with every connected counter, transceiver, or controller. If multiple stages or output loads increase supply demand, include their current in the power-budget calculation and verify that the supply remains within the device's operating limits throughout counting and preset transitions.
زانیاری پابەندبوون
The device is described as conforming to JEDEC Tentative Standard No. 13B for the description of B Series CMOS devices. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established and remain unknown.