Texas Instruments

CD4029BMT - 4-Bit Up/Down Counter | Texas Instruments

MPN: CD4029BMT ✓ सक्रिय
16-SOIC, 0.154 inch body width, 3.90 mm width Package Positive edge Speed
न्यूनतम ऑर्डर मात्रा: 1 |

CD4029BMT अवलोकन

The Texas Instruments CD4029BMT is a 4-bit CMOS presettable binary and BCD-decade up/down counter with a positive-edge clock and 16-SOIC package. It supports counting in either direction, preset control, carry input, and separate parallel preset inputs for counter initialization. The device is intended for digital counting, sequencing, timing, and control systems where one counter must operate in both directions.

A CMOS counter is a synchronous digital logic device that increments or decrements a binary or BCD-decade state on an active clock edge. The CD4029B belongs to the broader counter and divider logic category, which sits within CMOS logic, digital logic ICs, and general-purpose semiconductor control. Its bidirectional architecture consolidates two counting directions and programmable initialization into one package, reducing the number of separate counter components required by a system.

Key features include a 4-bit counting width, selectable binary or decade operation, positive-edge triggering, and separate up/down, binary/decade, preset-enable, and carry-in controls. According to the Texas Instruments product information, it is a versatile CMOS up/down counter designed for digital counting and control applications. The 16-SOIC package also makes it suitable for conventional surface-mount PCB assembly.

The counter can represent either a 0-to-15 binary sequence or a 0-to-9 BCD-decade sequence. Preset inputs allow a known starting value to be loaded before counting begins, while the carry and carry-out paths support cascaded stages in larger counters. These functions make the device more adaptable than a simple fixed-direction binary counter. Exact voltage limits, operating-temperature limits, propagation delays, and current ratings require confirmation from the manufacturer datasheet before production release.

Typical applications include bidirectional event counters, programmable sequence controllers, industrial timing modules, digital position or motion indicators, test equipment, and control logic that must count toward or away from a preset boundary. Multiple counter stages can also be cascaded when a system requires more than four counting bits. The appropriate selection criteria are logic compatibility, clock requirements, preset behavior, and package availability.

PCB implementation should follow the manufacturer pin description and recommended operating rules. Because logic-counter timing depends on clock-edge behavior and propagation delay, route the clock and control traces away from noisy switching nodes, provide a stable supply reference, and account for unused inputs according to the datasheet guidance. Do not infer input states from family naming conventions; use the exact CD4029B datasheet during schematic capture and verification.

This product page combines manufacturer-level device identification, verified distributor package and pricing observations, compatible same-family alternatives, parameter comparisons, and practical implementation guidance. It is intended to accelerate initial engineering selection while directing final electrical and pin-level validation to the authoritative CD4029B documentation.

के लिए ड्रॉप-इन विकल्प CD4029BMT — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

CD4029BM

✅ ड्रॉप-इन
Texas Instruments
📦 16-SOIC
4-stage binary or BCD-decade up/down counter · 4 stages · 4 bits · Up or down · Positive edge · Binary or BCD-decade · 4 individual JAM inputs · 1 CARRY-IN input with look-ahead carry

कीमत के लिए संपर्क करें

डेटाशीट देखें →

CD4029BMG4

✅ ड्रॉप-इन
📦 16-SOIC
4-bit counting width matches exactly, a 0% functional-width difference; suffix-specific qualification and grade limits differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

CD4029BEE4

✅ ड्रॉप-इन
📦 16-SOIC
4-bit counting width matches exactly, a 0% functional-width difference; suffix-specific environmental and qualification limits require checking

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

CD4029BF3A

✅ ड्रॉप-इन
📦 16-SOIC
4-bit counting width matches exactly, a 0% functional-width difference; grade and qualification suffix distinguish this option

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

CD4029BMT Maximum Ratings और Electrical Characteristics

Manufacturer Texas Instruments
Device Type CMOS presettable up/down counter
Counter Width 4 bit
Counting Modes Binary or BCD decade
Count Direction Up or down
Clock Edge Positive edge
Logic Family CMOS
पैकेज 16-SOIC, 0.154 inch body width, 3.90 mm width
पिन काउंट 16 pin
माउंटिंग प्रकार Surface mount
Preset Function Yes
Carry Input Yes
Carry Output Yes
JEDEC Description Standard JEDEC Tentative Standard No. 13B, Standard Specifications for Description of B Series CMOS Devices

CD4029BMT 16-soic, 0.154 inch body width, 3.90 mm width पिन कॉन्फ़िगरेशन गाइड

CD4029BMT (16-soic, 0.154 inch body width, 3.90 mm width पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

CD4029BMT के लिए 16-soic, 0.154 inch body width, 3.90 mm width पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: CD4029BMT.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

CD4029BMT के लिए उपयुक्त है 6 अनुप्रयोगs: Bidirectional Event Counter, Programmable Sequence Controller, Industrial Timing Module, Position And Motion Indicator, Cascaded Multi-Bit Counter, Digital Test Equipment Counter.

🏭

Bidirectional Event Counter

The CD4029BMT fits bidirectional event counting because its 4-bit counter can increment or decrement on a positive clock edge and can switch between binary and BCD-decade formats. Use the direction control to distinguish events accumulating toward a limit from events removing from that limit. The preset inputs allow a known count to be restored after a reset or maintenance interval. When cascading additional stages, include the carry path in timing analysis and verify propagation-delay limits from the manufacturer datasheet. This arrangement is useful for production counters, access-control totals, and process-event logging where both additions and removals must be represented.

🔧

Programmable Sequence Controller

The CD4029BMT supports programmable sequencing because its 4-bit output can be loaded through the preset controls and then advanced in either direction. A controller can establish a boundary, count toward or away from it, and trigger a downstream action when the carry output changes state. Binary mode provides 16 states, while BCD-decade mode provides 10 states for decimal-oriented displays or timing intervals. The implementation should account for clock-edge ordering, preset-enable timing, and any required initialization of control inputs according to the manufacturer pin and timing tables.

⏱️

Industrial Timing Module

The CD4029BMT can serve as the timing-state element in an industrial module that counts fixed intervals, retriggers a preset duration, or tracks remaining operating time. Its 4-bit width and selectable binary or BCD-decade mode allow direct representation of short timing states, while the carry and preset functions support repeatable sequences. The primary engineering considerations are maximum clock rate, supply compatibility, and propagation delay under the intended load. Confirm these parameters in the CD4029B datasheet and avoid using family-level ratings as a substitute for grade-specific limits.

⚙️

Position And Motion Indicator

The CD4029BMT is appropriate for simple position or motion indication because it counts in either direction from a preset reference point. Forward motion can increment the state while reverse motion decrements it, allowing the controller to compare the count with a target position. BCD-decade mode is convenient when the count must map directly to decimal display logic, while binary mode provides all 16 four-bit states. Reliability depends on debouncing mechanical or noisy sensor events before they reach the clock input and on respecting the prescribed logic levels and setup timing.

🖥️

Cascaded Multi-Bit Counter

The CD4029BMT can be used as one stage of a cascaded counter when a system needs more resolution than its native 4-bit state. Carry inputs and carry outputs permit multiple stages to form a larger counting range, provided timing and clock distribution are designed correctly. The compact 16-SOIC package reduces board area compared with discrete flip-flop implementations, although each stage adds propagation delay. Use a common, low-skew clock source and verify the cumulative timing against the manufacturer operating limits. This architecture suits totalizers, multistage timers, and digital event accumulators.

🧪

Digital Test Equipment Counter

The CD4029BMT can implement a compact test-point or pulse-counting function in digital test equipment. A positive-edge clock accepts counted events, while the up/down capability supports tests that count both accepted and rejected events. The four-bit output can be read by a controller, compared with a preset boundary, or extended with another counter stage. For reliable measurements, define the maximum event rate, account for propagation delay, and keep the clock away from high-energy switching nodes. The exact operating range and timing margins must come from the exact manufacturer documentation.

अनुशंसित उत्पादों का सारांश

CD4029BM Texas Instruments उपयोग में: Bidirectional Event Counter, Industrial Timing Module, Cascaded Multi-Bit Counter CD4029BMG4 Same-family counter option उपयोग में: Bidirectional Event Counter, Industrial Timing Module, Position And Motion Indicator, Digital Test Equipment Counter CD4029BEE4 Same-family programmable counter उपयोग में: Programmable Sequence Controller, Position And Motion Indicator, Digital Test Equipment Counter CD4029BF3A Same-family counter option उपयोग में: Programmable Sequence Controller, Cascaded Multi-Bit Counter
What is the CD4029BMT?
The CD4029BMT is a Texas Instruments 4-bit CMOS presettable up/down counter in a 16-SOIC package. According to the Texas Instruments CD4029B product information, it counts upward or downward and can operate as either a 4-bit binary counter or a BCD-decade counter. It also includes preset and carry functions for programmable sequencing and cascaded counting.
What is the operating voltage of CD4029BMT?
The operating-voltage range is not stated in the listed product information and must be confirmed from the Texas Instruments CD4029B datasheet before design release. The device is identified as a 4-bit CMOS up/down counter, but CMOS family naming alone is not sufficient to select the correct supply limits. Voltage compatibility must be checked against the logic-high and logic-low requirements of the connected circuit.
Where can I download the CD4029BMT datasheet PDF?
The official CD4029BMT documentation is available through the Texas Instruments CD4029B product page at https://www.ti.com/product/CD4029B. This manufacturer page is the appropriate starting point for the datasheet, pin description, electrical characteristics, and ordering information. Use the exact CD4029BMT ordering suffix when checking the package and temperature-grade details.
Where can I find the CD4029BMT pinout?
The CD4029BMT pinout must be taken from the pin-configuration table in the Texas Instruments CD4029B datasheet because the complete numbered terminal description is not printed in the product listings. The component uses a 16-SOIC package, so the schematic symbol and PCB footprint should contain 16 pins. Do not infer individual clock, preset, carry, or data-pin assignments from the package outline alone.
How many counting bits does the CD4029BMT have?
The CD4029BMT has a 4-bit counting width, providing 16 states when configured for binary counting. In BCD-decade mode, it provides ten states. The manufacturer product information identifies the part as a four-stage binary or BCD-decade up/down counter, while distributor technical descriptions also identify positive-edge clock operation.
Can CD4029BMT count both upward and downward?
Yes, the CD4029BMT can count both upward and downward, with the direction selected by its up/down control input. It is a four-stage counter that also supports binary or BCD-decade operation. This bidirectional capability is useful for motion, position, sequencing, and event-counting systems that need movement toward or away from a preset boundary.
What is the best drop-in replacement for CD4029BMT?
CD4029BM, CD4029BMG4, CD4029BEE4, and CD4029BF3A are same-family 16-SOIC alternatives identified by cross-reference information, but each suffix must be checked for temperature grade, qualification, and supply status. No cross-brand drop-in equivalent was established from the available manufacturer references. Compare the exact electrical table and pin description before treating any suffix variant as a production replacement.
Is CD4029BM a drop-in replacement for CD4029BMT?
CD4029BM is a same-family 16-SOIC counter and is the closest identified drop-in candidate for CD4029BMT, with the same 4-bit architecture and zero difference in counting width. The suffix distinction may affect temperature grade or qualification, so confirm those limits and orderable status in the manufacturer documentation. The match is considered 90% because non-counting parameters require separate verification.
When should I choose CD4029BMT instead of CD4029BM?
Choose CD4029BMT when its exact ordering suffix matches the required temperature grade, qualification, and availability criteria for the design. Choose CD4029BM only after confirming that its grade-specific limits remain acceptable. Both parts are identified as 4-bit CMOS up/down counters in 16-SOIC packages, so the decision is governed mainly by qualification and environmental requirements rather than counter functionality.
Is CD4029BMT suitable for industrial timing and sequencing control?
The CD4029BMT is functionally suitable for timing and sequencing control because it provides a 4-bit bidirectional counter, binary or BCD-decade selection, preset inputs, and carry functions. Suitability for a specific industrial product still depends on supply voltage, temperature range, noise immunity, and qualification requirements. Verify those details in the manufacturer datasheet before releasing an industrial design.
Where can I buy CD4029BMT?
Use the Request a Quote form on this page to request CD4029BMT availability, order quantity, and current commercial terms. The manufacturer and distributor listings confirm that CD4029BMT is cataloged as a 16-SOIC counter, while the request process allows the exact suffix and required quantity to be checked. Do not select a substitute based only on the CD4029B family name.
What is the lead time for CD4029BMT?
The current production lead time for CD4029BMT should be confirmed through the Request a Quote form on this page. A distributor listing states that lead time is to be confirmed and shows an estimated delivery window, which is not a guaranteed factory schedule. For production planning, request a committed lead time for the exact package, grade, and order quantity.
Is CD4029BMT in stock?
Stock availability can change quickly and depends on the authorized channel and required quantity, so use the Request a Quote form on this page for the current CD4029BMT status. One distributor listing shows a substantial quantity available, while other listings also identify the part. Treat those observations as transactional indications rather than a guaranteed allocation.
What are the key specifications of CD4029BMT that engineers should know?
The key identified specifications are a 4-bit counting width, binary and BCD-decade modes, selectable upward or downward counting, a positive-edge clock, preset and carry functions, CMOS technology, and a 16-SOIC package. The 16-SOIC body is listed as 0.154 inch, or 3.90 mm, wide. Supply limits, timing, current, and environmental ratings must be taken from the manufacturer datasheet.
What can replace CD4029BMT without changing the PCB?
CD4029BM is the leading same-package replacement candidate identified for CD4029BMT, followed by CD4029BMG4 and CD4029BEE4 as suffix variants to evaluate. Each uses the 16-SOIC format and retains the 4-bit up/down-counter function, so the physical footprint can remain unchanged. Electrical and qualification differences must still be reviewed before approving a substitution.

के लिए इंजीनियरिंग संदर्भ डेटा CD4029BMT — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose CD4029BMT when the design requires the exact Texas Instruments ordering suffix and its associated grade, qualification, and commercial terms. CD4029BM is the closest same-family option to evaluate when a 16-SOIC 4-bit up/down counter is needed, but its suffix-specific limits must match the application. Use CD4029BMG4, CD4029BEE4, or CD4029BF3A when their individual qualification or environmental characteristics satisfy the design; all preserve the 16-SOIC format and 4-bit counting function. For new high-speed or low-voltage systems, verify the supply range and propagation delay rather than assuming compatibility from the CD4029 family name. For cascaded counters, include carry timing and clock distribution in the selection process.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद CD4029BM CD4029BMG4 CD4029BEE4 CD4029BF3A
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Counter Width 4 bit 4 bit 4 bit 4 bit 4 bit
Counting Mode Binary or BCD decade Binary or BCD decade Binary or BCD decade Binary or BCD decade Binary or BCD decade
Count Direction Up or down Up or down Up or down Up or down Up or down
Logic Technology CMOS CMOS CMOS CMOS CMOS
Preset Support Yes Yes Yes Yes Yes

मुख्य विशेषताएँ

  • Combines four-bit binary and decade counting with bidirectional operation (बनामCD4029BM)
  • Uses the established 16-SOIC footprint for compact surface-mount assembly (बनामCD4029BMG4)
  • Supports programmable initialization through individual preset inputs (बनामCD4029BEE4)
  • Supports positive-edge counting with carry paths for expansion (बनामCD4029BF3A)

डिज़ाइन नोट्स

Do not substitute a CD4029 family part solely because it uses a 16-SOIC outline. Compare the exact pin description, supply-voltage range, operating-temperature grade, clock-edge definition, and qualification status for every ordering suffix. The CD4029BM, CD4029BMG4, CD4029BEE4, and CD4029BF3A alternatives share the package format and 4-bit function, but suffix-specific limits still require manufacturer verification before production use.

Route the clock as a clean, low-skew digital signal and keep it away from switching-node copper and high-current return paths. Debounce any mechanical or slow-contact event source before allowing it to clock the counter, because multiple transitions can be counted as separate events. If several counters are cascaded, distribute the clock with matched geometry and evaluate cumulative propagation delay against the fastest intended operating rate.

Use the exact CD4029B 16-SOIC land pattern and assign every net according to the manufacturer pin-configuration table. Place the device near the signals it counts, keep preset and direction traces short where practical, and provide a low-impedance ground reference. Validate unused-input states, power-up behavior, and reset sequencing in both hardware and the production schematic review.

Confirm the exact supply range and input-current limits for the selected ordering suffix rather than applying limits from another CD4000-series device. Check logic-level compatibility with every connected counter, transceiver, or controller. If multiple stages or output loads increase supply demand, include their current in the power-budget calculation and verify that the supply remains within the device's operating limits throughout counting and preset transitions.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The device is described as conforming to JEDEC Tentative Standard No. 13B for the description of B Series CMOS devices. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established and remain unknown.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

CD4029BMT datasheet CD4029BMT pinout CD4029BMT datasheet pdf CD4029BMT equivalent CD4029BMT replacement CD4029BMT cross reference CD4029BMT vs CD4029BM CD4029BMT 16-SOIC footprint CD4029BMT price CD4029BMT stock Texas Instruments CD4029BMT CD4029B 4-bit up down counter

संबंधित कंपोनेंट्स और शब्द

Texas Instruments CD4029BMT CD4029BM CD4029BMG4 CD4029BEE4 CD4029BF3A CD4029B CMOS counter presettable up/down counter 4-bit binary counter BCD-decade counter positive-edge clock carry input carry output parallel preset counter and divider logic digital logic IC general-purpose semiconductor 16-SOIC SOIC package family surface-mount technology JEDEC Tentative Standard No. 13B bidirectional event counting programmable sequencing
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें