CD4040BCN - 12-Stage CMOS Binary Counter | onsemi
MPN: CD4040BCN ✓ چالاکCD4040BCN گشتی
A ripple-carry binary counter is a digital logic IC that divides an input clock by a power of two at selected binary outputs. The CD4040BCN belongs to the CMOS 4000-series logic hierarchy, combining counter and divider functions in one integrated circuit. Its ripple architecture propagates carry transitions through successive stages, making it appropriate when moderate clocking performance and useful division ratios are more important than synchronous high-speed operation.
The principal functional features are 12 independently accessible binary outputs, negative-edge clock advancement, and an asynchronous master reset. Its 16-PDIP construction supports through-hole assembly and prototyping systems. The manufacturer documentation also identifies the CD4020BC and CD4060BC as related 14-stage ripple-carry counters, while CD4040BCN is specifically the 12-stage member.
Because each counter stage divides the preceding frequency by two, the output waveform frequencies are derived directly from the clock frequency. The upper outputs therefore provide division ratios through 2^12, subject to the timing limitations of ripple propagation. This architecture is useful for creating lower-frequency clocks, timing intervals, selectable frequency outputs, and basic digital counters without a programmable microcontroller.
Typical uses include industrial pulse and event counting, laboratory timer modules, clock-frequency dividers, automotive and appliance timing logic, embedded control interfaces, and educational digital-logic systems. The reset input allows the counter state to be initialized synchronously with the rest of a system. In a divider arrangement, a defined reset level establishes a repeatable starting state before counting resumes.
PCB design should preserve the 16-PDIP footprint and route the clock away from sensitive analog or high-speed signal paths. Because ripple-carry transitions can contain accumulated delay across multiple stages, use the lowest-frequency suitable output when precise timing relationships are important. Confirm the actual operating voltage, current, temperature limits, and logic thresholds against the manufacturer datasheet before finalizing a design.
This product page combines the 12-stage counter description, verified package information, replacement guidance, parameter comparisons, and practical design considerations. It is intended to support component selection, PCB compatibility checks, timing design, and sourcing decisions for engineers working with the CD4000 CMOS logic family.
جێگرەوەکانی جێگۆڕکێ بۆ CD4040BCN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CD4040BCN (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.
CD4040CN
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4040BE
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CD4040BEE4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
DC4040
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4040BCN زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Counter Type | 12-stage ripple-carry binary counter |
| Number of Output Stages | 12 stages |
| Counting Edge | Negative transition |
| Logic Family | CMOS 4000 series |
| Master Reset | Asynchronous |
| پاکێج | 16-lead plastic dual-in-line package (PDIP) |
| Package Width | 0.300 inch |
| Package Designation | N16E |
| Package Family | PDIP through-hole package |
| جۆری دامەزراندن | Through-hole |
| ژمارەی پینەکان | 16 pins |
ڕێکخستنی پینی CD4040BCN
| پین 1 | CLK — Clock input; the counter advances on the negative transition. |
| پین 2 | MR — Asynchronous master reset input. |
| پین 3 | Q0 — First binary counter output. |
| پین 4 | Q1 — Second binary counter output. |
| پین 5 | Q2 — Third binary counter output. |
| پین 6 | Q3 — Fourth binary counter output. |
| پین 7 | Q4 — Fifth binary counter output. |
| پین 8 | Q5 — Sixth binary counter output. |
| پین 9 | Q6 — Seventh binary counter output. |
| پین 10 | Q7 — Eighth binary counter output. |
| پین 11 | Q8 — Ninth binary counter output. |
| پین 12 | Q9 — Tenth binary counter output. |
| پین 13 | Q10 — Eleventh binary counter output. |
| پین 14 | Q11 — Twelfth binary counter output. |
| پین 15 | VDD — Positive supply terminal. |
| پین 16 | VSS — Ground or negative supply terminal. |
بەکارهێنانە باوەکان
CD4040BCN گونجاوە بۆ 6 بەکارھێنانs: Programmable Frequency Divider, Industrial Pulse Counter, Digital Timer and Delay Circuit, Automotive Control Logic, Laboratory Test Signal Generator, Appliance Sequencing Control.
Programmable Frequency Divider
The CD4040BCN fits programmable clock-divider designs because its 12 ripple-carry stages generate successive divide-by-two outputs from one input clock. Engineers can select the required output stage instead of adding a separate chain of divider gates. Because each stage advances on the negative transition of the preceding clock, the circuit supports frequency reduction and pulse-rate conversion in control, timing, and signal-generation systems. The asynchronous master reset provides a deterministic starting state, while the 16-PDIP package simplifies through-hole prototyping. Confirm the selected output’s operating frequency and the permitted supply voltage against the manufacturer timing and electrical tables before relying on it for precision waveform generation.
پێشنیارکراو
Industrial Pulse Counter
The onsemi CD4040BCN is suitable for counting repetitive industrial or appliance events when a compact dedicated counter is preferable to adding microcontroller firmware. Its 12 binary stages retain the accumulated count as individual logic states, allowing firmware or downstream logic to observe the event total. The counter advances on each negative clock transition, so the input signal should be shaped into clean transitions at the required rate. Master reset provides a convenient initialization point after startup or a completed production cycle. The 16-PDIP package also permits straightforward replacement and inspection in control boards, timers, and service-oriented equipment where through-hole assembly and long product support are valuable.
پێشنیارکراو
Digital Timer and Delay Circuit
CD4040BCN can implement a simple digital timer by deriving a time base from a periodic clock and selecting one of its 12 divided outputs. The chosen stage establishes a coarse delay or periodic interval, while the master reset restarts the timing sequence. This arrangement is useful for appliance control, delayed activation, repetitive sampling windows, and basic sequencing where a dedicated one-shot is unnecessary. Because ripple-carry counters accumulate propagation delay as signals move through the stages, use an earlier output when pulse-width accuracy is more important than the longest available division ratio. The manufacturer datasheet should be consulted for timing limits under the actual supply voltage and temperature.
پێشنیارکراو
Automotive Control Logic
The CD4040BCN can support low-speed counting, timing, and periodic-control functions in automotive or appliance electronics when its operating range and qualification requirements match the design. Its 12 binary outputs make it useful for deriving multiple time-enable signals or maintaining a count across a control sequence. The negative-edge counting behavior must remain compatible with the input pulse source, and the asynchronous reset should be deasserted with adequate timing margin. For safety- or temperature-critical automotive use, confirm the exact ordering code, operating-temperature grade, and AEC-Q100 status directly from the manufacturer documentation rather than inferring qualification from the 4000-series family name.
پێشنیارکراو
Laboratory Test Signal Generator
The 12-stage architecture of CD4040BCN makes it useful in simple laboratory dividers, low-frequency signal sources, and educational timing demonstrators. A stable input oscillator can feed the clock, while different binary outputs provide related frequencies separated by factors of two. This allows a compact circuit to demonstrate cascaded division, negative-edge counting, reset behavior, and digital waveform relationships. The 16-PDIP package is convenient for breadboard and through-hole teaching boards. For accurate laboratory measurements, however, account for ripple-propagation delay and supply-dependent timing, and compare the output waveform with an independent frequency reference before assigning high timing-accuracy requirements.
پێشنیارکراو
Appliance Sequencing Control
CD4040BCN is applicable in appliance and embedded-control sequencing systems that need repeatable state advancement rather than a high-performance synchronous counter. Its multiple binary outputs can represent successive phases, operating intervals, or accumulated event counts for gates, indicators, and control logic. The asynchronous master reset allows a controller to restart the sequence consistently, and the dedicated CMOS counter can reduce firmware overhead. As with any ripple-carry implementation, choose the earliest usable output where precise phase timing is required and leave adequate settling time before sampling a later state. Confirm operating voltage, logic levels, and environmental limits in the manufacturer datasheet before integrating it into a mains-connected appliance.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CD4040BCN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CD4040CN | CD4040BE | CD4040BEE4 | DC4040 |
|---|---|---|---|---|---|
| Brand | onsemi | onsemi | Texas Instruments | Texas Instruments | onsemi |
| Package | 16-PDIP | 16-PDIP | 16-PDIP | 16-PDIP | 16-PDIP |
| Counter Stages | 12 stages | 12 stages | 12 stages | 12 stages | 12 stages |
| Counting Edge | Negative transition | Negative transition | Negative transition | Negative transition | Negative transition |
| Logic Family | CMOS 4000 series | CMOS 4000 series | CMOS 4000 series | CMOS 4000 series | CMOS 4000 series |
| Master Reset | Asynchronous | Asynchronous | Asynchronous | Asynchronous | Asynchronous |
| Special Ordering Configuration | CD4040BCN | CD4040CN | CD4040BE | CD4040BEE4 | DC4040 |
جیاکەرەوە سەرەکییەکان
- Dedicated 12-stage counter in a standard through-hole package (بەراورد بەCD4040BE)
- Direct onsemi same-family sourcing option (بەراورد بەCD4040CN)
- Primary manufacturer sourcing path (بەراورد بەTI CD4040B)
تێبینییەکانی دیزاین
Route the clock input away from sensitive analog nodes and other high-speed nets because a ripple-carry counter can produce cumulative propagation delay across its 12 stages. Use an early counter output when pulse timing or duty-cycle accuracy matters more than maximum division ratio. Confirm transition behavior and timing margins in the manufacturer timing diagram at the actual supply voltage and temperature.
Maintain the 16-PDIP footprint and pin orientation of CD4040BCN when designing a replacement board. Place the master-reset and clock connections away from long, unterminated PCB traces, and connect the supply and ground pins with short paths appropriate for CMOS logic. Verify the final pin assignments against the manufacturer pin-description table before fabrication.
Do not treat the highest-order binary output as an equally precise timer in every design. Ripple delay accumulates through successive stages, so use the lowest divider stage that meets the required frequency ratio. Also ensure that reset pulse width and removal timing satisfy the device specifications, and avoid treating the unused package position as a general-purpose connection.
زانیاری پابەندبوون
Compliance status is not explicitly stated in the retrieved manufacturer and distributor pages. Confirm the exact onsemi ordering code against current manufacturer compliance documentation before production release.