onsemi

CD4040BCN - 12-Stage CMOS Binary Counter | onsemi

N.º de pieza: CD4040BCN ✓ Activo
16-lead plastic dual-in-line package (PDIP) Package
MOQ: 1 |

CD4040BCN Descripción general

The onsemi CD4040BCN is a 12-stage ripple-carry binary counter and divider in a 16-lead plastic dual-in-line package. It advances one count on the negative transition of each clock pulse, provides 12 binary output stages, and includes an asynchronous master reset for clearing the counter. The device is suitable for frequency division, event counting, timing generation, and digital state-sequence implementations.

A ripple-carry binary counter is a digital logic IC that divides an input clock by a power of two at selected binary outputs. The CD4040BCN belongs to the CMOS 4000-series logic hierarchy, combining counter and divider functions in one integrated circuit. Its ripple architecture propagates carry transitions through successive stages, making it appropriate when moderate clocking performance and useful division ratios are more important than synchronous high-speed operation.

The principal functional features are 12 independently accessible binary outputs, negative-edge clock advancement, and an asynchronous master reset. Its 16-PDIP construction supports through-hole assembly and prototyping systems. The manufacturer documentation also identifies the CD4020BC and CD4060BC as related 14-stage ripple-carry counters, while CD4040BCN is specifically the 12-stage member.

Because each counter stage divides the preceding frequency by two, the output waveform frequencies are derived directly from the clock frequency. The upper outputs therefore provide division ratios through 2^12, subject to the timing limitations of ripple propagation. This architecture is useful for creating lower-frequency clocks, timing intervals, selectable frequency outputs, and basic digital counters without a programmable microcontroller.

Typical uses include industrial pulse and event counting, laboratory timer modules, clock-frequency dividers, automotive and appliance timing logic, embedded control interfaces, and educational digital-logic systems. The reset input allows the counter state to be initialized synchronously with the rest of a system. In a divider arrangement, a defined reset level establishes a repeatable starting state before counting resumes.

PCB design should preserve the 16-PDIP footprint and route the clock away from sensitive analog or high-speed signal paths. Because ripple-carry transitions can contain accumulated delay across multiple stages, use the lowest-frequency suitable output when precise timing relationships are important. Confirm the actual operating voltage, current, temperature limits, and logic thresholds against the manufacturer datasheet before finalizing a design.

This product page combines the 12-stage counter description, verified package information, replacement guidance, parameter comparisons, and practical design considerations. It is intended to support component selection, PCB compatibility checks, timing design, and sourcing decisions for engineers working with the CD4000 CMOS logic family.

Alternativas directas para CD4040BCN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con CD4040BCN (mismo factor de forma y huella) — difiere en Package.

Texas Instruments
Package: 16-pin PDIP
Comparar con CD4040BCN →

CD4040CN

✅ Sustitución directa
📦 16-PDIP
Same 12-stage counter function and 16-PDIP footprint; no verified functional or electrical difference identified.

📋 Alternativa de referencia (no en el catálogo)

CD4040BE

✅ Sustitución directa
Texas Instruments
📦 16-PDIP
12-stage CMOS ripple-carry binary counter/divider · 1 element · 12 bits · Negative edge · Active high · CMOS

Consulte el precio

Ver hoja de datos →

CD4040BEE4

✅ Sustitución directa
📦 16-PDIP
Same 12-stage counter architecture and 16-PDIP footprint; E4 denotes a distinct TI ordering configuration.

📋 Alternativa de referencia (no en el catálogo)

DC4040

✅ Sustitución directa
📦 16-PDIP
Documented equivalent with the same 12-stage counter function and 16-PDIP footprint; ordering-code differences only.

📋 Alternativa de referencia (no en el catálogo)

CD4040BCN Valores máximos y características eléctricas

Counter Type 12-stage ripple-carry binary counter
Number of Output Stages 12 stages
Counting Edge Negative transition
Logic Family CMOS 4000 series
Master Reset Asynchronous
Encapsulado 16-lead plastic dual-in-line package (PDIP)
Package Width 0.300 inch
Package Designation N16E
Package Family PDIP through-hole package
Tipo de montaje Through-hole
Número de pines 16 pins

Configuración de pines de CD4040BCN

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pin 1 CLK — Clock input; the counter advances on the negative transition.
Pin 2 MR — Asynchronous master reset input.
Pin 3 Q0 — First binary counter output.
Pin 4 Q1 — Second binary counter output.
Pin 5 Q2 — Third binary counter output.
Pin 6 Q3 — Fourth binary counter output.
Pin 7 Q4 — Fifth binary counter output.
Pin 8 Q5 — Sixth binary counter output.
Pin 9 Q6 — Seventh binary counter output.
Pin 10 Q7 — Eighth binary counter output.
Pin 11 Q8 — Ninth binary counter output.
Pin 12 Q9 — Tenth binary counter output.
Pin 13 Q10 — Eleventh binary counter output.
Pin 14 Q11 — Twelfth binary counter output.
Pin 15 VDD — Positive supply terminal.
Pin 16 VSS — Ground or negative supply terminal.

Aplicaciones típicas

CD4040BCN es adecuado para 6 aplicacións: Programmable Frequency Divider, Industrial Pulse Counter, Digital Timer and Delay Circuit, Automotive Control Logic, Laboratory Test Signal Generator, Appliance Sequencing Control.

⚡

Programmable Frequency Divider

The CD4040BCN fits programmable clock-divider designs because its 12 ripple-carry stages generate successive divide-by-two outputs from one input clock. Engineers can select the required output stage instead of adding a separate chain of divider gates. Because each stage advances on the negative transition of the preceding clock, the circuit supports frequency reduction and pulse-rate conversion in control, timing, and signal-generation systems. The asynchronous master reset provides a deterministic starting state, while the 16-PDIP package simplifies through-hole prototyping. Confirm the selected output’s operating frequency and the permitted supply voltage against the manufacturer timing and electrical tables before relying on it for precision waveform generation.

🏭

Industrial Pulse Counter

The onsemi CD4040BCN is suitable for counting repetitive industrial or appliance events when a compact dedicated counter is preferable to adding microcontroller firmware. Its 12 binary stages retain the accumulated count as individual logic states, allowing firmware or downstream logic to observe the event total. The counter advances on each negative clock transition, so the input signal should be shaped into clean transitions at the required rate. Master reset provides a convenient initialization point after startup or a completed production cycle. The 16-PDIP package also permits straightforward replacement and inspection in control boards, timers, and service-oriented equipment where through-hole assembly and long product support are valuable.

⏱️

Digital Timer and Delay Circuit

CD4040BCN can implement a simple digital timer by deriving a time base from a periodic clock and selecting one of its 12 divided outputs. The chosen stage establishes a coarse delay or periodic interval, while the master reset restarts the timing sequence. This arrangement is useful for appliance control, delayed activation, repetitive sampling windows, and basic sequencing where a dedicated one-shot is unnecessary. Because ripple-carry counters accumulate propagation delay as signals move through the stages, use an earlier output when pulse-width accuracy is more important than the longest available division ratio. The manufacturer datasheet should be consulted for timing limits under the actual supply voltage and temperature.

🚗

Automotive Control Logic

The CD4040BCN can support low-speed counting, timing, and periodic-control functions in automotive or appliance electronics when its operating range and qualification requirements match the design. Its 12 binary outputs make it useful for deriving multiple time-enable signals or maintaining a count across a control sequence. The negative-edge counting behavior must remain compatible with the input pulse source, and the asynchronous reset should be deasserted with adequate timing margin. For safety- or temperature-critical automotive use, confirm the exact ordering code, operating-temperature grade, and AEC-Q100 status directly from the manufacturer documentation rather than inferring qualification from the 4000-series family name.

🧪

Laboratory Test Signal Generator

The 12-stage architecture of CD4040BCN makes it useful in simple laboratory dividers, low-frequency signal sources, and educational timing demonstrators. A stable input oscillator can feed the clock, while different binary outputs provide related frequencies separated by factors of two. This allows a compact circuit to demonstrate cascaded division, negative-edge counting, reset behavior, and digital waveform relationships. The 16-PDIP package is convenient for breadboard and through-hole teaching boards. For accurate laboratory measurements, however, account for ripple-propagation delay and supply-dependent timing, and compare the output waveform with an independent frequency reference before assigning high timing-accuracy requirements.

🔧

Appliance Sequencing Control

CD4040BCN is applicable in appliance and embedded-control sequencing systems that need repeatable state advancement rather than a high-performance synchronous counter. Its multiple binary outputs can represent successive phases, operating intervals, or accumulated event counts for gates, indicators, and control logic. The asynchronous master reset allows a controller to restart the sequence consistently, and the dedicated CMOS counter can reduce firmware overhead. As with any ripple-carry implementation, choose the earliest usable output where precise phase timing is required and leave adequate settling time before sampling a later state. Confirm operating voltage, logic levels, and environmental limits in the manufacturer datasheet before integrating it into a mains-connected appliance.

Resumen de productos recomendados

CD4060BC Related 14-stage ripple-carry binary counter and divider Se usa en: Programmable Frequency Divider, Digital Timer and Delay Circuit, Laboratory Test Signal Generator CD4020BC Related 14-stage ripple-carry binary counter and divider Se usa en: Programmable Frequency Divider, Digital Timer and Delay Circuit, Laboratory Test Signal Generator CD4040CN Same-family drop-in counter option Se usa en: Industrial Pulse Counter, Automotive Control Logic, Appliance Sequencing Control CD4040BE Texas Instruments Se usa en: Industrial Pulse Counter, Automotive Control Logic DC4040 Documented equivalent counter option Se usa en: Appliance Sequencing Control
What is the onsemi CD4040BCN?
The onsemi CD4040BCN is a 12-stage ripple-carry binary counter and divider in a 16-lead PDIP package. According to the manufacturer datasheet, the counter advances on the negative transition of each clock pulse and provides 12 individually accessible binary outputs. It is a member of the CMOS 4000-series logic family and is intended for counting, timing, frequency division, and related digital-control applications.
How many counter stages does CD4040BCN have?
The CD4040BCN has 12 counter stages. The manufacturer datasheet identifies CD4040BC as the 12-stage version and distinguishes it from the related CD4020BC and CD4060BC, which are 14-stage ripple-carry binary counters. Each stage divides the preceding clock frequency by two, creating a series of useful binary frequency-division points.
What clock edge increments the CD4040BCN counter?
The CD4040BCN increments on the negative transition of each clock pulse. The manufacturer datasheet states that the counters advance one count on this falling edge. Circuit designers should therefore treat the active clock edge as a falling edge and use asymmetric clock signals or a suitable edge-generation stage when exact timing relationships with another counter are important.
Where can I download the CD4040BCN datasheet PDF?
The CD4040BCN datasheet PDF is available from the manufacturer document link listed on this page and from the indexed Fairchild PDF hosted by DigiKey. The manufacturer document covers the CD4020BC, CD4040BC, and CD4060BC counter family, including the 16-lead PDIP package information and circuit characteristics. Use the pin-description table and timing information in that document when assigning PCB connections.
Where is the pinout for CD4040BCN?
The CD4040BCN pinout is shown by the manufacturer datasheet and follows the 16-lead PDIP arrangement associated with package N16E. The device uses clock, master reset, 12 binary outputs, supply, ground, and a no-connect position. Confirm pin numbering against the package drawing before drilling a new PCB or adapting an existing board.
Where can I buy CD4040BCN online?
Use the Request a Quote form on this page to request CD4040BCN pricing, stock confirmation, minimum order quantity, and lead time for the exact onsemi part number and 16-PDIP package. The part is listed as available for ordering, but current quantity, allocation, and delivery should be confirmed through the quote process rather than inferred from catalog status.
What is the price of CD4040BCN?
The current CD4040BCN unit price is shown through the Request a Quote form on this page. The form permits quantity-specific sourcing requests for the exact onsemi CD4040BCN orderable part. It is the appropriate channel for confirming current pricing, minimum order quantity, packaging, stock, and expected delivery without relying on an outdated catalog figure.
What is the lead time for CD4040BCN?
The current CD4040BCN lead time should be requested through the Request a Quote form on this page. Lead time depends on the ordered package, quantity, and current factory and distribution allocation. A quantity and package confirmed by the quote response provides the most reliable purchasing commitment for this 16-PDIP logic IC.
Is CD4040BCN in stock?
CD4040BCN is shown as orderable, but a firm stock quantity should be confirmed through the Request a Quote form on this page. The quote team can verify current inventory for the exact onsemi suffix and 16-PDIP package. This distinction is important because component availability can change without an immediate change to the manufacturer lifecycle listing.
What can replace CD4040BCN?
CD4040CN is the closest same-brand drop-in candidate identified for CD4040BCN because it implements the same 12-stage counter function in a 16-PDIP package. Other documented equivalents include TI CD4040BE and CD4040BEE4, while DC4040 is identified as an equivalent model. Confirm operating voltage, timing, temperature grade, and exact pinout before using any substitute in production.
Is CD4040BE the same as CD4040BCN?
CD4040BE is a pin-compatible 16-PDIP alternative to CD4040BCN and provides the same 12-stage ripple-carry binary-counter function, but it is manufactured by Texas Instruments rather than onsemi. According to the manufacturer information for CD4040B, the architecture and negative-edge counting behavior are retained. Qualification requirements and production sourcing should still be reviewed before substitution.
What is the best TI equivalent for CD4040BCN?
TI CD4040BE is the best documented TI drop-in equivalent for the onsemi CD4040BCN in the 16-PDIP package. It is a 12-stage CMOS ripple-carry binary counter with negative-edge counting, allowing an existing board to retain its package footprint. Verify the full electrical limits, supply range, timing characteristics, and temperature grade against the manufacturer datasheet before release.
When should I choose CD4040BCN over CD4040BE?
Choose CD4040BCN when your procurement and qualification process specifically standardizes onsemi parts and the required CD4040BCN package is available. Choose CD4040BE when the TI CD4040B source is preferred and its electrical and qualification data meet the application requirements. Both use a 16-PDIP footprint and implement the same 12-stage negative-edge counter architecture.
Is CD4040BCN suitable for frequency division and timer circuits?
Yes, CD4040BCN is suitable for frequency division and timer circuits because it provides 12 binary stages with divide-by-two progression. According to the manufacturer datasheet, each counter stage advances on the negative transition of the incoming clock. The circuit can derive lower-frequency clock outputs, while the asynchronous master reset establishes a repeatable initial count.
What are the key specifications of CD4040BCN that engineers should know?
The key CD4040BCN specifications are its 12-stage ripple-carry architecture, negative-edge counting behavior, 12 binary outputs, asynchronous master reset, CMOS 4000-series logic family, and 16-lead PDIP package. The manufacturer datasheet also identifies the related CD4020BC and CD4060BC as 14-stage counters. Supply voltage, maximum clock frequency, and temperature limits must be confirmed from the device rating table.

Datos de referencia de ingeniería para CD4040BCN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose CD4040BCN when the design needs a 12-stage ripple-carry counter in a 16-PDIP package and onsemi standardization is preferred. Its negative-edge counting, asynchronous master reset, and 12 binary outputs make it appropriate for frequency division, event counting, timing, and appliance sequencing. CD4040CN is the closest onsemi ordering option when its ordering code better matches the required production or packaging configuration. CD4040BE and CD4040BEE4 are useful TI alternatives when dual-manufacturer sourcing is advantageous, but qualification, electrical limits, and lifecycle requirements should be reviewed before substitution. DC4040 is another documented equivalent candidate. For all alternatives, verify the exact pinout, supply range, maximum clock frequency, and temperature grade. Prefer an earlier counter stage when precise timing is required because ripple propagation delay accumulates across the 12 stages.

Comparación con alternativas

Parámetro Este producto CD4040CN CD4040BE CD4040BEE4 DC4040
Brand onsemi onsemi Texas Instruments Texas Instruments onsemi
Package 16-PDIP 16-PDIP 16-PDIP 16-PDIP 16-PDIP
Counter Stages 12 stages 12 stages 12 stages 12 stages 12 stages
Counting Edge Negative transition Negative transition Negative transition Negative transition Negative transition
Logic Family CMOS 4000 series CMOS 4000 series CMOS 4000 series CMOS 4000 series CMOS 4000 series
Master Reset Asynchronous Asynchronous Asynchronous Asynchronous Asynchronous
Special Ordering Configuration CD4040BCN CD4040CN CD4040BE CD4040BEE4 DC4040

Diferenciadores clave

  • Dedicated 12-stage counter in a standard through-hole package (frente a CD4040BE)
  • Direct onsemi same-family sourcing option (frente a CD4040CN)
  • Primary manufacturer sourcing path (frente a TI CD4040B)

Notas de diseño

Route the clock input away from sensitive analog nodes and other high-speed nets because a ripple-carry counter can produce cumulative propagation delay across its 12 stages. Use an early counter output when pulse timing or duty-cycle accuracy matters more than maximum division ratio. Confirm transition behavior and timing margins in the manufacturer timing diagram at the actual supply voltage and temperature.

Maintain the 16-PDIP footprint and pin orientation of CD4040BCN when designing a replacement board. Place the master-reset and clock connections away from long, unterminated PCB traces, and connect the supply and ground pins with short paths appropriate for CMOS logic. Verify the final pin assignments against the manufacturer pin-description table before fabrication.

Do not treat the highest-order binary output as an equally precise timer in every design. Ripple delay accumulates through successive stages, so use the lowest divider stage that meets the required frequency ratio. Also ensure that reset pulse width and removal timing satisfy the device specifications, and avoid treating the unused package position as a general-purpose connection.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance status is not explicitly stated in the retrieved manufacturer and distributor pages. Confirm the exact onsemi ordering code against current manufacturer compliance documentation before production release.

Búsquedas relacionadas

CD4040BCN datasheet CD4040BCN pinout CD4040BCN datasheet pdf CD4040BCN equivalent CD4040BCN replacement CD4040BCN cross reference CD4040BCN vs CD4040BE onsemi CD4040BCN CD4040BCN 16-PDIP pinout CD4040BCN frequency divider CD4040BCN price CD4040BCN stock

Componentes & términos relacionados

onsemi Fairchild Semiconductor CD4040BCN CD4040CN CD4040BE CD4040BEE4 DC4040 CD4020BC CD4060BC CMOS 4000-series logic ripple-carry counter binary counter frequency divider 12-stage counter negative-edge clock asynchronous master reset binary output CD4000 CMOS logic family 16-PDIP N16E package through-hole package JEDEC MS-001 timing propagation delay
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ