CD4520BD3 - Dual 4-Bit Binary Counter, Military Grade | Harris | 16-CDIP
MPN: CD4520BD3 ✓ چالاکCD4520BD3 گشتی
An up-counter is a type of sequential logic device in which each rising clock edge increments a binary count register. In the broader taxonomy, CD4520BD3 sits in the CMOS counter family, which belongs to the larger logic IC category, a sub-group of integrated circuits and semiconductors. Two counters in one package let a designer build a 24-bit cascaded divider, a two-stage programmable timer, or a dual-channel event counter without adding a second package or second power rail.
Key characteristics of the part include a 3 V to 18 V operating supply range, positive-edge-triggered synchronous counting, CMOS levels and logic swing compatible with the 4000 series family, and an operating temperature grade designated as military. The ceramic hermetic-style CDIP-16 mechanical format, 0.300 inch lead pitch and through-hole thermal design make it suited to chassis-mounted, ruggedised and long-life industrial, aerospace and defence equipment rather than high-density surface-mount consumer assemblies.
Because the two counter sections share one package and one master reset, a single reset pulse clears both count chains, simplifying synchronisation in cascaded divider designs. The binary outputs are true flip-flop outputs that change only on the active clock edge, which keeps downstream decode logic glitch-free compared with ripple or asynchronous counter topologies.
Typical application areas include frequency division and pulse-rate reduction in industrial control and instrumentation, programmable timers and delay generators in test and measurement equipment, event and piece counting in production machinery, LED display refresh and multiplexing subsystems, and clock or counter blocks in aerospace and defence avionics where the military temperature grade and ceramic package are valued.
When designing with the CD4520BD3, remember that it is a through-hole 0.300 inch CDIP, so it will not fit a standard 0.1 inch DIP footprint and cannot be assembled on a surface-mount board without a socket or a deliberate adapter. Take the pin assignments from the manufacturer pin-description table before routing the board, and remember that cascaded counters require care so that the carry from one section is used as the clock of the next to avoid race conditions.
جێگرەوەکانی جێگۆڕکێ بۆ CD4520BD3 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CD4520BD3 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, RoHS Status, Counter Type, Counter Width, Counting Direction.
CD4520BF3A
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4520BD
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →7702301EA
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4520BF
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4520BE
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CD4520BD3 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| کارکردن | Dual 4-bit synchronous binary up-counter |
| Logic Family | CMOS 4000/14000/40000 series |
| Number of Counters | 2 (counter 0 and counter 1) |
| Count Width | 4 bits per counter |
| Counting Direction | Up (count up only) |
| Triggering | Positive edge, synchronous |
| Supply Voltage Range | 3 V to 18 V |
| Output Drive Type | CMOS totem-pole |
| Temperature Grade | Military |
| Package Type | CDIP-16 (ceramic DIP, through-hole) |
| Lead Pitch | 0.300 inch (7.62 mm) |
| Number of Terminals | 16 |
| جۆری دامەزراندن | Through-hole |
| Package Body Length | 0.300 inch (7.62 mm) body, 0.400 inch (10.16 mm) lead span |
| Master Reset | Common reset clears both counter sections |
| Operating Voltage Detail | 3 V to 18 V nominal logic supply |
| دۆخی RoHS | unknown |
ڕێنمایی ڕێکخستنی پینی CD4520BD3 0.300 inch (7.62 mm) body, 0.400 inch (10.16 mm) lead span
ڕێکخستنی پین بۆ CD4520BD3 (پاکێجی 0.300 inch (7.62 mm) body, 0.400 inch (10.16 mm) lead span). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CD4520BD3.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CD4520BD3 گونجاوە بۆ 6 بەکارھێنانs: Frequency Division and Pulse-Rate Reduction, Programmable Timer and Delay Generation, Test and Measurement Pulse Counting, LED Display Refresh and Multiplexing, Aerospace and Defence Timing Logic, Production Machinery and Event Counting.
Frequency Division and Pulse-Rate Reduction
The CD4520BD3 divides an incoming clock by a programmable binary factor using its two 4-bit counter sections, turning a high-rate pulse train into a slower, usable rate for downstream logic. Because each section counts on the positive edge and provides four binary outputs plus a carry, a cascade of the two sections inside one 16-CDIP package can produce division ratios up to 256 from a single clock source. The 3 V to 18 V supply range lets the same counter sit directly beside CMOS logic running at 5 V or 15 V, and the military temperature grade suits instrument and industrial front ends that run through extended ambient cycles.
پێشنیارکراو
Programmable Timer and Delay Generation
The CD4520BD3 is used as the timing core in delay and interval generators because both counter sections are clocked independently yet share a single master reset, so a reset pulse can restart both timers together and keep them phase-aligned. A 16-pin ceramic DIP that operates from 3 V to 18 V is easy to place in legacy control and test equipment where supply rails vary between 5 V and 15 V. The military temperature designation makes it appropriate for long-life industrial timers, alarm and sequencer logic, and avionics timing chains that must hold timing accuracy across wide ambient temperature swings.
پێشنیارکراو
Test and Measurement Pulse Counting
In test and measurement equipment the CD4520BD3 counts incoming pulses from sensors, probes and fixtures, providing a stable binary total for display or further processing. Synchronous positive-edge counting keeps the outputs glitch-free, so downstream display and decode logic does not need extra filtering. The 16-CDIP through-hole format suits instrument chassis construction where parts are socketed for maintenance, and the military temperature grade allows the same counter board to be reused in environmental and field test systems. Two independent sections allow one channel to count events while the second tracks time base intervals.
پێشنیارکراو
LED Display Refresh and Multiplexing
The CD4520BD3 drives display refresh and multiplexing subsystems in industrial panels and instrument front ends, where a counter chain generates the digit strobe and blanking intervals that keep LED and LCD segments visible without flicker. Because the outputs change only on the clock edge, the display scan lines are clean and free of the intermediate states typical of ripple counters. The 3 V to 18 V supply range suits systems running at 5 V logic, and the ceramic 16-CDIP package tolerates the temperature excursions seen in unheated equipment cabinets. Two counter sections conveniently drive two multiplexed display banks.
پێشنیارکراو
Aerospace and Defence Timing Logic
The CD4520BD3 is used in aerospace, defence and ruggedised timing subsystems where the military temperature grade and ceramic CDIP-16 package are decisive requirements rather than options. The 4000/14000/40000-series CMOS architecture provides standard logic swing and thresholding, making it straightforward to interface with 1970s-1990s heritage avionics and ground-support equipment that still relies on 5 V and 15 V CMOS rails. Two independent counters allow clock division and event counting to be handled by one device, which helps conserve limited board area and reduce the number of qualified components in a long-lifecycle programme.
پێشنیارکراو
Production Machinery and Event Counting
Production and packaging machinery uses the CD4520BD3 to count parts, cycles or pallets and to derive machine step timing, with the two counter sections handling one part count and one machine-position count in parallel. The positive-edge synchronous counting behaviour suits noisy motor-driven environments where asynchronous ripple counters would produce spurious decode glitches. The through-hole 16-CDIP construction tolerates vibration and rework on shop-floor serviceable equipment, and the military temperature rating allows deployment in unheated factory bays and outdoor kiosks. Outputs feed directly into PLC or discrete sequencing logic through standard CMOS levels.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CD4520BD3 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CD4520BF3A | CD4520BD | 7702301EA | CD4520BF | CD4520BE |
|---|---|---|---|---|---|---|
| Package | 16-CDIP (DIP-16), 0.300 inch lead pitch | 16-CDIP (DIP-16), 0.300 inch lead pitch - identical | 16-CDIP (DIP-16), 0.300 inch lead pitch - identical | 16-CDIP (DIP-16), 0.300 inch lead pitch - identical | 16-CDIP (DIP-16), 0.300 inch lead pitch - identical | 16-DIP (DIP-16), 0.300 inch lead pitch - identical |
| Brand / Heritage | Harris Corporation (Intersil heritage) | Intersil | Intersil | Intersil | Texas Instruments | Texas Instruments |
| Function | Dual 4-bit synchronous binary up-counter | Dual 4-bit synchronous binary up-counter | Dual 4-bit synchronous binary up-counter | Dual 4-bit synchronous binary up-counter | Dual 4-bit synchronous binary up-counter | Dual 4-bit synchronous binary up-counter |
| Logic Family | CMOS 4000/14000/40000 series | CMOS 4000/14000/40000 series | CMOS 4000/14000/40000 series | CMOS 4000/14000/40000 series | CMOS 4000/14000/40000 series | CMOS 4000/14000/40000 series |
| Supply Voltage Range | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V |
| Temperature Grade | Military | Military | Commercial/industrial grade marking | Military | Military ceramic CDIP option | Commercial |
| Triggering | Positive edge, synchronous | Positive edge, synchronous | Positive edge, synchronous | Positive edge, synchronous | Positive edge, synchronous | Positive edge, synchronous |
| Mounting / Lead Pitch | Through-hole, 0.300 inch (7.62 mm) | Through-hole, 0.300 inch (7.62 mm) | Through-hole, 0.300 inch (7.62 mm) | Through-hole, 0.300 inch (7.62 mm) | Through-hole, 0.300 inch (7.62 mm) | Through-hole, 0.300 inch (7.62 mm) |
| Package Material | Ceramic DIP (CDIP-16) | Ceramic DIP (CDIP-16) | Ceramic DIP (CDIP-16) | Ceramic DIP (CDIP-16) | Ceramic DIP (CDIP-16) | Plastic DIP (PDIP-16) |
| Master Reset | Common reset for both counter sections | Common reset for both counter sections | Common reset for both counter sections | Common reset for both counter sections | Common reset for both counter sections | Common reset for both counter sections |
| Counter Sections | 2 independent 4-bit sections | 2 independent 4-bit sections | 2 independent 4-bit sections | 2 independent 4-bit sections | 2 independent 4-bit sections | 2 independent 4-bit sections |
جیاکەرەوە سەرەکییەکان
- Military temperature grade in a ceramic package (بەراورد بەCD4520BE)
- Two independent counter sections in one package (بەراورد بەCD4520BF)
- Established Harris part number for traceability (بەراورد بەCD4520BF3A)
- Positive-edge synchronous counting (بەراورد بە7702301EA)
تێبینییەکانی دیزاین
The CD4520BD3 uses a 0.300 inch (7.62 mm) lead pitch, so it will not drop into a 0.1 inch DIP socket or a standard 0.6 inch row spacing. Confirm the PCB footprint against the 16-lead ceramic DIP outline, keep the socket or solder pads aligned with the package row spacing, and note that ceramic CDIP packages are taller than plastic DIPs - check the enclosure height and any heat-sink or connector clearance around the socket. A socket is preferable on repairable equipment because it lets a counter be exchanged without rework.
Do not treat the CD4520BD3 as a general-purpose logic replacement for 74HC-family counters: the CMOS 4000-series input thresholds are referenced to the supply rail, so a 5 V TTL output driving a 15 V counter can fail to switch reliably. Also remember that the CDIP-16 part is a military-grade ceramic option with limited assembly flexibility - it is not surface-mountable, and the industrial plastic DIP variants use the same footprint but different thermal and grade characteristics. Verify the pin table from the manufacturer datasheet before assigning board nets.
In a cascaded divider, feed the carry output of one counter section into the clock input of the next and keep the chain short, because stray capacitance on a high-impedance CMOS clock node lengthens edge times and can cause double counting. Provide a local 0.1 uF bypass capacitor at the supply pins with a short, low-inductance path to ground, and decouple every supply rail on the board rather than assuming the counter's own rail is clean. If the clock source is noisy, use a Schmitt-trigger buffer ahead of the clock input instead of feeding raw switch bounce directly into the counter.
The CD4520BD3 accepts a 3 V to 18 V supply, but the usable supply for a given design depends on the logic thresholds of the devices it interfaces with. Keep the counter on the same rail as its CMOS neighbours so that output levels remain valid relative to VDD, and avoid running the part near the extremes of the supply range if the surrounding logic requires a tighter margin for noise immunity. Series termination resistors of a few tens of ohms on clock and reset lines help suppress ringing on long board traces.
زانیاری پابەندبوون
The CD4520BD3 is a legacy Harris/Intersil military-grade 4000-series CMOS counter; no RoHS, REACH, lead-free or conflict-minerals statements are stated on the manufacturer material for this ordering code, so all environmental fields are recorded as unknown.