Harris Corporation

CD4520BD3 - Dual 4-Bit Binary Counter, Military Grade | Harris | 16-CDIP

Référence : CD4520BD3 ✓ Actif
3 V to 18 V Vdss CDIP-16 (ceramic DIP, through-hole) Package
MOQ : 1 |

CD4520BD3 Présentation

The Harris Corporation CD4520BD3 is a dual 4-bit synchronous binary up-counter built on CMOS 4000/14000/40000-series logic, packaged in a 16-lead ceramic DIP (CDIP-16, 0.300 inch / 7.62 mm pitch) rated for military temperature conditions. Two independent 4-bit counters operate from a single supply rail, each with its own clock input, binary outputs (Q0-Q3 and Q4-Q7) and a common master reset, making the device a natural building block for frequency division, event counting and modulo-N timing.

An up-counter is a type of sequential logic device in which each rising clock edge increments a binary count register. In the broader taxonomy, CD4520BD3 sits in the CMOS counter family, which belongs to the larger logic IC category, a sub-group of integrated circuits and semiconductors. Two counters in one package let a designer build a 24-bit cascaded divider, a two-stage programmable timer, or a dual-channel event counter without adding a second package or second power rail.

Key characteristics of the part include a 3 V to 18 V operating supply range, positive-edge-triggered synchronous counting, CMOS levels and logic swing compatible with the 4000 series family, and an operating temperature grade designated as military. The ceramic hermetic-style CDIP-16 mechanical format, 0.300 inch lead pitch and through-hole thermal design make it suited to chassis-mounted, ruggedised and long-life industrial, aerospace and defence equipment rather than high-density surface-mount consumer assemblies.

Because the two counter sections share one package and one master reset, a single reset pulse clears both count chains, simplifying synchronisation in cascaded divider designs. The binary outputs are true flip-flop outputs that change only on the active clock edge, which keeps downstream decode logic glitch-free compared with ripple or asynchronous counter topologies.

Typical application areas include frequency division and pulse-rate reduction in industrial control and instrumentation, programmable timers and delay generators in test and measurement equipment, event and piece counting in production machinery, LED display refresh and multiplexing subsystems, and clock or counter blocks in aerospace and defence avionics where the military temperature grade and ceramic package are valued.

When designing with the CD4520BD3, remember that it is a through-hole 0.300 inch CDIP, so it will not fit a standard 0.1 inch DIP footprint and cannot be assembled on a surface-mount board without a socket or a deliberate adapter. Take the pin assignments from the manufacturer pin-description table before routing the board, and remember that cascaded counters require care so that the carry from one section is used as the clock of the next to avoid race conditions.

Alternatives de remplacement direct pour CD4520BD3 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec CD4520BD3 (même facteur de forme et même empreinte) — différant par Mounting Type, RoHS Status, Counter Type, Counter Width, Counting Direction.

Harris Corporation
Mounting Type: Surface mount
RoHS Status: Compliant
Counter Type: Binary counter
Comparer avec CD4520BD3 →
Texas Instruments
RoHS Status: Compliant
Counter Type: Internally synchronous binary counter
Counter Width: 4 bits per counter
Comparer avec CD4520BD3 →

CD4520BF3A

✅ Remplacement direct
📦 16-CDIP (DIP-16)
Same dual 4-bit CMOS up-counter, same 3 V to 18 V supply and 16-CDIP military ceramic outline; differs only in manufacturer ordering code and heritage marking (0% functional difference)

📋 Alternative de référence (hors catalogue)

CD4520BD

✅ Remplacement direct
Harris Corporation
📦 16-CDIP (DIP-16)
Binary counter · 2 elements · 4 bits · Up · CMOS · 3 V to 18 V · 8 MHz · 80 ns

Contactez-nous pour le prix

Voir la fiche technique →

7702301EA

✅ Remplacement direct
📦 16-CDIP (DIP-16)
Alternate Intersil ordering code for the same CD4520BF3A military ceramic 16-CDIP counter; identical function and pinout (0% functional difference)

📋 Alternative de référence (hors catalogue)

CD4520BF

✅ Remplacement direct
📦 16-CDIP (DIP-16)
Identical dual 4-bit CMOS up-counter with 3 V to 18 V supply in the same 16-CDIP outline; differs in manufacturer heritage and case temperature option versus the Harris military marking (0% functional difference)

📋 Alternative de référence (hors catalogue)

CD4520BE

✅ Remplacement direct
Texas Instruments
📦 16-DIP (DIP-16)
CMOS dual binary up-counter · 2 counters · 4 bits per counter · 4 stages per counter · Up-count · Positive-going or negative-going · Parallel binary outputs with carry · Internally synchronous binary counter

Contactez-nous pour le prix

Voir la fiche technique →

CD4520BD3 Valeurs maximales et caractéristiques électriques

Fonction Dual 4-bit synchronous binary up-counter
Logic Family CMOS 4000/14000/40000 series
Number of Counters 2 (counter 0 and counter 1)
Count Width 4 bits per counter
Counting Direction Up (count up only)
Triggering Positive edge, synchronous
Supply Voltage Range 3 V to 18 V
Output Drive Type CMOS totem-pole
Temperature Grade Military
Package Type CDIP-16 (ceramic DIP, through-hole)
Lead Pitch 0.300 inch (7.62 mm)
Number of Terminals 16
Type de montage Through-hole
Package Body Length 0.300 inch (7.62 mm) body, 0.400 inch (10.16 mm) lead span
Master Reset Common reset clears both counter sections
Operating Voltage Detail 3 V to 18 V nominal logic supply
Statut RoHS unknown

Guide de configuration des broches du CD4520BD3 0.300 inch (7.62 mm) body, 0.400 inch (10.16 mm) lead span

Configuration des broches du CD4520BD3 (boîtier 0.300 inch (7.62 mm) body, 0.400 inch (10.16 mm) lead span). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 0.300 inch (7.62 mm) body, 0.400 inch (10.16 mm) lead span pour le CD4520BD3

Aucune donnée de brochage détaillée disponible pour CD4520BD3.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

CD4520BD3 convient pour 6 applications: Frequency Division and Pulse-Rate Reduction, Programmable Timer and Delay Generation, Test and Measurement Pulse Counting, LED Display Refresh and Multiplexing, Aerospace and Defence Timing Logic, Production Machinery and Event Counting.

⚡

Frequency Division and Pulse-Rate Reduction

The CD4520BD3 divides an incoming clock by a programmable binary factor using its two 4-bit counter sections, turning a high-rate pulse train into a slower, usable rate for downstream logic. Because each section counts on the positive edge and provides four binary outputs plus a carry, a cascade of the two sections inside one 16-CDIP package can produce division ratios up to 256 from a single clock source. The 3 V to 18 V supply range lets the same counter sit directly beside CMOS logic running at 5 V or 15 V, and the military temperature grade suits instrument and industrial front ends that run through extended ambient cycles.

🏭

Programmable Timer and Delay Generation

The CD4520BD3 is used as the timing core in delay and interval generators because both counter sections are clocked independently yet share a single master reset, so a reset pulse can restart both timers together and keep them phase-aligned. A 16-pin ceramic DIP that operates from 3 V to 18 V is easy to place in legacy control and test equipment where supply rails vary between 5 V and 15 V. The military temperature designation makes it appropriate for long-life industrial timers, alarm and sequencer logic, and avionics timing chains that must hold timing accuracy across wide ambient temperature swings.

🔧

Test and Measurement Pulse Counting

In test and measurement equipment the CD4520BD3 counts incoming pulses from sensors, probes and fixtures, providing a stable binary total for display or further processing. Synchronous positive-edge counting keeps the outputs glitch-free, so downstream display and decode logic does not need extra filtering. The 16-CDIP through-hole format suits instrument chassis construction where parts are socketed for maintenance, and the military temperature grade allows the same counter board to be reused in environmental and field test systems. Two independent sections allow one channel to count events while the second tracks time base intervals.

💡

LED Display Refresh and Multiplexing

The CD4520BD3 drives display refresh and multiplexing subsystems in industrial panels and instrument front ends, where a counter chain generates the digit strobe and blanking intervals that keep LED and LCD segments visible without flicker. Because the outputs change only on the clock edge, the display scan lines are clean and free of the intermediate states typical of ripple counters. The 3 V to 18 V supply range suits systems running at 5 V logic, and the ceramic 16-CDIP package tolerates the temperature excursions seen in unheated equipment cabinets. Two counter sections conveniently drive two multiplexed display banks.

✈️

Aerospace and Defence Timing Logic

The CD4520BD3 is used in aerospace, defence and ruggedised timing subsystems where the military temperature grade and ceramic CDIP-16 package are decisive requirements rather than options. The 4000/14000/40000-series CMOS architecture provides standard logic swing and thresholding, making it straightforward to interface with 1970s-1990s heritage avionics and ground-support equipment that still relies on 5 V and 15 V CMOS rails. Two independent counters allow clock division and event counting to be handled by one device, which helps conserve limited board area and reduce the number of qualified components in a long-lifecycle programme.

🏭

Production Machinery and Event Counting

Production and packaging machinery uses the CD4520BD3 to count parts, cycles or pallets and to derive machine step timing, with the two counter sections handling one part count and one machine-position count in parallel. The positive-edge synchronous counting behaviour suits noisy motor-driven environments where asynchronous ripple counters would produce spurious decode glitches. The through-hole 16-CDIP construction tolerates vibration and rework on shop-floor serviceable equipment, and the military temperature rating allows deployment in unheated factory bays and outdoor kiosks. Outputs feed directly into PLC or discrete sequencing logic through standard CMOS levels.

What is the CD4520BD3?
The CD4520BD3 is a dual 4-bit synchronous binary up-counter in the CMOS 4000/14000/40000 series, supplied in a 16-lead ceramic DIP package. Each of the two independent counter sections increments its 4-bit output on the positive edge of its own clock input, and both sections share a common master reset. Harris Corporation markets the part in the military temperature grade, and it is specified to operate from a 3 V to 18 V supply.
Where can I download the CD4520BD3 datasheet?
The CD4520BD3 datasheet is available as a PDF from the manufacturer data sheet listings for the CD4520B family, and the Texas Instruments CD4520B document covers the same counter architecture. The CD4520BD3-specific datasheet PDF can be reached through the DiGi Electronics datasheet archive listed in the sources for this page. Use the manufacturer datasheet pin-description table for the authoritative terminal assignment before laying out a board.
What is the supply voltage range of the CD4520BD3?
The CD4520BD3 operates from a 3 V to 18 V supply, matching the standard CMOS 4000-series logic range. The part is listed by Harris and Intersil in the 4000/14000/40000 series family, and equivalent 4000-series counters from other vendors are specified to the same 3 V to 18 V span. Keep the supply within this window and derate the supply rails in designs that also drive heavier loads on the same board.
Is the CD4520BD3 a drop-in replacement for CD4520BF3A?
The CD4520BD3 and CD4520BF3A are functionally and mechanically interchangeable in the same 16-CDIP outline, both being 4-bit CMOS synchronous up-counters rated from 3 V to 18 V. The distinguishing details are heritage and marking rather than function: CD4520BD3 carries the Harris part number and military grade designation, while CD4520BF3A is the Intersil/TI military ceramic-DIP ordering code. Verify the terminal names against the datasheet for the specific source before substituting in production.
What is the best drop-in replacement for the CD4520BD3?
The strongest drop-in replacement is the Intersil CD4520BF3A, a military-grade 4-bit CMOS up-counter in the identical 16-CDIP package with the same 3 V to 18 V supply range. Other pin-compatible options include the Intersil CD4520BD and the alternate number 7702301EA, and the Texas Instruments CD4520BF for designs that can accept a different heritage marking. All share the 16-lead through-hole footprint, so no PCB change is required.
CD4520BD3 vs CD4520BF - which is better for a new design?
Choose the CD4520BD3 when you need the military temperature grade and the Harris heritage part number in a 16-CDIP ceramic package; choose the CD4520BF when a Texas Instruments ordering code is preferred and the temperature grade of the ceramic CDIP part is acceptable. Electrically both devices are 4-bit synchronous CMOS up-counters with a 3 V to 18 V supply, so the decision is usually driven by documentation, traceability and procurement requirements rather than by function.
When should I choose the CD4520BD3 over the CD4520BE?
Choose the CD4520BD3 when the ambient environment is wide or the equipment must be qualified for military conditions, because the ceramic CDIP-16 package and military temperature designation suit ruggedised, long-life and defence-related installations. Choose the CD4520BE when the design is cost- and volume-driven commercial or industrial equipment where the plastic DIP package and the narrower temperature range are sufficient. The counter function and pinout remain the same across both.
What can replace the CD4520BD3?
The CD4520BD3 can be replaced by the Intersil CD4520BF3A, which is the same 4-bit CMOS up-counter in the same 16-CDIP military ceramic package, or by the Intersil CD4520BD in the same pin-compatible 16-pin outline. For designs where heritage is unimportant, the Texas Instruments CD4520BF is also a functional equivalent in the same 0.300 inch through-hole format. Confirm the terminal functions and temperature grade against each candidate datasheet.
Is the CD4520BD3 the same as the CD4520BF3A?
The CD4520BD3 and CD4520BF3A perform the same function: two independent 4-bit synchronous binary up-counters with a common master reset, both supplied in a 16-CDIP package from a 3 V to 18 V supply. They differ in manufacturer heritage and ordering code rather than in architecture, which is why they are frequently listed as equivalents for each other. Always confirm pin names and temperature grade on the datasheet for the specific source you buy.
What are the key specifications of the CD4520BD3 that engineers should know?
The CD4520BD3 is a Harris Corporation dual 4-bit synchronous binary up-counter in the CMOS 4000/14000/40000 series, supplied as a 16-lead ceramic DIP with 0.300 inch (7.62 mm) lead pitch and a 3 V to 18 V operating supply. It provides two separately clocked counter sections, each delivering four binary outputs, sharing one master reset terminal, and is specified in the military temperature grade with positive-edge triggering.
Where can I buy the CD4520BD3 online?
The CD4520BD3 is a legacy military-grade ceramic DIP counter and is handled through specialist sourcing channels rather than general catalog stocking. Use the Request a Quote form on this page to request current availability, unit pricing and shipping options for the exact CD4520BD3 ordering code. The part is also carried in distribution as a stocked Harris/Intersil heritage item, which usually means traceability documentation is available on request.
What is the price of the CD4520BD3?
Pricing for the CD4520BD3 depends on lot size, traceability requirements and current distributor inventory, so a fixed figure published on a page would go stale quickly. Request a quote through the Request a Quote form on this page for a current unit price, volume breaks and lead time for the exact CD4520BD3 part number and 16-CDIP package. Military-grade ceramic CDIP parts are typically quoted on a per-piece basis with delivery dependent on sourcing.
What is the lead time for the CD4520BD3?
Lead time for the CD4520BD3 depends on whether the unit is drawn from stocked distribution inventory or manufactured to order as a heritage military ceramic-DIP part. Request current lead time and minimum order quantity through the Request a Quote form on this page. Because the device is specified in the military temperature grade with a ceramic CDIP-16 package, expect longer sourcing cycles than for the equivalent commercial-grade plastic DIP variants.
Is the CD4520BD3 in stock?
Stock status for the CD4520BD3 changes by distributor and by packaging form, so confirm availability rather than relying on a cached listing. Use the Request a Quote form on this page to have current stock, allocation and lead time confirmed for the exact 16-CDIP ordering code. Legacy Harris/Intersil military ceramic-DIP devices are typically maintained as stocked inventory by specialist distributors, so a same-week supply answer is often possible.
Where do I find the CD4520BD3 pinout?
The authoritative CD4520BD3 terminal assignment is in the manufacturer datasheet pin-description table for the CD4520B family, and the Texas Instruments CD4520B datasheet shows the same 16-lead functional pin configuration. Because the ceramic CDIP-16 part uses a 0.300 inch lead pitch, match pin 1 to the notch or dot marker on the package body before inserting it into a socket or soldering it. Use the datasheet table rather than a generic 16-pin DIP drawing when assigning board tracks.
What is a good Texas Instruments equivalent for the CD4520BD3?
The Texas Instruments CD4520BF is the closest equivalent: the same dual 4-bit synchronous CMOS up-counter with a 3 V to 18 V supply, offered in the same 16-lead through-hole outline. The CD4520BF3A variant corresponds to the military-grade ceramic 16-CDIP ordering used by Intersil. Both are drop-in compatible on the same 0.300 inch DIP footprint, so an existing CD4520BD3 layout can be reused without respinning the board.

Données de référence d'ingénierie pour CD4520BD3 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the CD4520BD3 when your design needs a 4-bit CMOS up-counter in a 16-lead ceramic DIP that is specified for military temperature conditions, such as aerospace, defence ground support, ruggedised industrial timers or long-lifecycle instrumentation. Choose the Intersil CD4520BF3A or the alternate number 7702301EA when the same electrical performance is wanted but programme documentation names the Intersil ordering code; the parts are functionally interchangeable. Choose the Texas Instruments CD4520BF for new non-military designs that prefer a current manufacturer ordering code in the identical 16-CDIP outline, and the CD4520BE when cost and volume dominate and a commercial-grade plastic DIP is acceptable. In every case the pin footprint, 3 V to 18 V supply range and positive-edge synchronous counting behaviour are unchanged, so a board can be reused across all five options. Check the lead pitch carefully: these are 0.300 inch devices, not 0.1 inch, and the ceramic package sits taller than a plastic DIP.

Comparaison avec les alternatives

Paramètre Ce produit CD4520BF3A CD4520BD 7702301EA CD4520BF CD4520BE
Package 16-CDIP (DIP-16), 0.300 inch lead pitch 16-CDIP (DIP-16), 0.300 inch lead pitch - identical 16-CDIP (DIP-16), 0.300 inch lead pitch - identical 16-CDIP (DIP-16), 0.300 inch lead pitch - identical 16-CDIP (DIP-16), 0.300 inch lead pitch - identical 16-DIP (DIP-16), 0.300 inch lead pitch - identical
Brand / Heritage Harris Corporation (Intersil heritage) Intersil Intersil Intersil Texas Instruments Texas Instruments
Function Dual 4-bit synchronous binary up-counter Dual 4-bit synchronous binary up-counter Dual 4-bit synchronous binary up-counter Dual 4-bit synchronous binary up-counter Dual 4-bit synchronous binary up-counter Dual 4-bit synchronous binary up-counter
Logic Family CMOS 4000/14000/40000 series CMOS 4000/14000/40000 series CMOS 4000/14000/40000 series CMOS 4000/14000/40000 series CMOS 4000/14000/40000 series CMOS 4000/14000/40000 series
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V
Temperature Grade Military Military Commercial/industrial grade marking Military Military ceramic CDIP option Commercial
Triggering Positive edge, synchronous Positive edge, synchronous Positive edge, synchronous Positive edge, synchronous Positive edge, synchronous Positive edge, synchronous
Mounting / Lead Pitch Through-hole, 0.300 inch (7.62 mm) Through-hole, 0.300 inch (7.62 mm) Through-hole, 0.300 inch (7.62 mm) Through-hole, 0.300 inch (7.62 mm) Through-hole, 0.300 inch (7.62 mm) Through-hole, 0.300 inch (7.62 mm)
Package Material Ceramic DIP (CDIP-16) Ceramic DIP (CDIP-16) Ceramic DIP (CDIP-16) Ceramic DIP (CDIP-16) Ceramic DIP (CDIP-16) Plastic DIP (PDIP-16)
Master Reset Common reset for both counter sections Common reset for both counter sections Common reset for both counter sections Common reset for both counter sections Common reset for both counter sections Common reset for both counter sections
Counter Sections 2 independent 4-bit sections 2 independent 4-bit sections 2 independent 4-bit sections 2 independent 4-bit sections 2 independent 4-bit sections 2 independent 4-bit sections

Principaux différenciateurs

  • Military temperature grade in a ceramic package (vs CD4520BE)
  • Two independent counter sections in one package (vs CD4520BF)
  • Established Harris part number for traceability (vs CD4520BF3A)
  • Positive-edge synchronous counting (vs 7702301EA)

Notes de conception

The CD4520BD3 uses a 0.300 inch (7.62 mm) lead pitch, so it will not drop into a 0.1 inch DIP socket or a standard 0.6 inch row spacing. Confirm the PCB footprint against the 16-lead ceramic DIP outline, keep the socket or solder pads aligned with the package row spacing, and note that ceramic CDIP packages are taller than plastic DIPs - check the enclosure height and any heat-sink or connector clearance around the socket. A socket is preferable on repairable equipment because it lets a counter be exchanged without rework.

Do not treat the CD4520BD3 as a general-purpose logic replacement for 74HC-family counters: the CMOS 4000-series input thresholds are referenced to the supply rail, so a 5 V TTL output driving a 15 V counter can fail to switch reliably. Also remember that the CDIP-16 part is a military-grade ceramic option with limited assembly flexibility - it is not surface-mountable, and the industrial plastic DIP variants use the same footprint but different thermal and grade characteristics. Verify the pin table from the manufacturer datasheet before assigning board nets.

In a cascaded divider, feed the carry output of one counter section into the clock input of the next and keep the chain short, because stray capacitance on a high-impedance CMOS clock node lengthens edge times and can cause double counting. Provide a local 0.1 uF bypass capacitor at the supply pins with a short, low-inductance path to ground, and decouple every supply rail on the board rather than assuming the counter's own rail is clean. If the clock source is noisy, use a Schmitt-trigger buffer ahead of the clock input instead of feeding raw switch bounce directly into the counter.

The CD4520BD3 accepts a 3 V to 18 V supply, but the usable supply for a given design depends on the logic thresholds of the devices it interfaces with. Keep the counter on the same rail as its CMOS neighbours so that output levels remain valid relative to VDD, and avoid running the part near the extremes of the supply range if the surrounding logic requires a tighter margin for noise immunity. Series termination resistors of a few tens of ohms on clock and reset lines help suppress ringing on long board traces.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The CD4520BD3 is a legacy Harris/Intersil military-grade 4000-series CMOS counter; no RoHS, REACH, lead-free or conflict-minerals statements are stated on the manufacturer material for this ordering code, so all environmental fields are recorded as unknown.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

CD4520BD3 CD4520BD3 datasheet cd4520b datasheet CD4520BD3 pinout CD4520BD3 CDIP-16 CD4520B dual 4-bit binary counter CD4520BD3 vs CD4520BF3A CD4520BD3 drop-in replacement CD4520B cross reference CD4520BD3 frequency divider CD4520BD3 3V to 18V counter CD4520BD3 price and stock Harris CD4520BD3 CD4520B 16-pin DIP footprint what replaces CD4520BD3

Composants & termes associés

Harris Corporation CD4520BD3 CD4520B CD4520BF3A CD4520BD CD4520BF CD4520BE 7702301EA Texas Instruments Intersil binary counter up-counter synchronous counter sequential logic CMOS logic 4000/14000/40000 series frequency divider timing circuit CDIP-16 ceramic DIP DIP-16 through-hole package 0.300 inch lead pitch positive edge triggered military temperature grade
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ