Cirrus Logic Inc.

CS8401A-CP - 2-Channel Digital Audio Transmitter | Cirrus Logic

MPN: CS8401A-CP ✓ چالاک
AES/EBU, IEC 958 S/PDIF, EIAJ CP-340 Rds(on) 24-pin PDIP Package
MOQ: 1 |

CS8401A-CP گشتی

Cirrus Logic CS8401A-CP is a 2-channel digital audio interface transmitter built as a monolithic CMOS circuit in a 24-pin PDIP package. It accepts audio and control data separately, performs multiplexing and biphase-mark encoding internally, and supports AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 interface standards. The transmitter can drive a transmission line directly or through a transformer.

A digital audio transmitter is an interface IC that converts parallel or control-oriented audio information into a standardized digital transmission format. It belongs to the digital audio interface transmitter category, connects to audio codecs and digital signal processors, and operates within the broader hierarchy of interface ICs and semiconductor components. Standardized formats such as S/PDIF allow digital audio to move between consumer, industrial, and professional audio equipment while preserving a common signal structure.

The CS8401A family provides separate paths for audio and control data while handling multiplexing and biphase-mark encoding inside the transmitter. This integration reduces the amount of external encoding logic required in a digital audio interface. The component is identified specifically as a 2-channel audio transmitter and supports direct line drive or transformer-coupled output, allowing system designers to select the output strategy that matches the transmission-line topology.

The monolithic CMOS implementation combines the transmitter functions in one integrated circuit. AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 compatibility makes the device applicable to equipment using established digital-audio conventions. Its interface role is especially relevant to legacy audio designs, professional playback equipment, digital mixers, digital recording systems, and test equipment that requires a dedicated digital-audio output stage.

Typical uses include converting an internal PCM audio stream into a S/PDIF-compatible transmission, generating a digital-audio output for an amplifier or recorder, and adding a standardized digital output to a legacy audio board. In these systems, the transmitter handles format encoding and multiplexing while an upstream codec or processor supplies the source audio. A downstream receiver then recovers the digital audio stream from the encoded transmission.

PCB implementation requires careful treatment of the digital output path. Use the manufacturer pin-description table when assigning signals, place the device to minimize return-path discontinuity, and match the output connection method to the intended cable and grounding topology. Confirm electrical limits, supply requirements, clocking details, and output configuration in the manufacturer datasheet before finalizing a production design.

This product page consolidates the verified function, package, interface standards, sourcing information, and practical design considerations for the CS8401A-CP. Its key engineering value is the combination of separate audio and control inputs, internal multiplexing and biphase-mark encoding, and support for direct or transformer-coupled transmission in a single 24-pin PDIP device.

جێگرەوەکانی جێگۆڕکێ بۆ CS8401A-CP — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

CS8401A-CP زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 2-channel digital audio interface transmitter
Manufacturer Cirrus Logic
Supported Interface Standards AES/EBU, IEC 958 S/PDIF, EIAJ CP-340
Channel Count 2 channels
Process Technology Monolithic CMOS
Audio Input Configuration Audio and control data accepted separately
Internal Encoding Multiplexing and biphase-mark encoding
Output Drive Method Direct transmission-line drive or transformer coupling
پاکێج 24-pin PDIP
جۆری دامەزراندن Through-hole

ڕێنمایی ڕێکخستنی پینی CS8401A-CP 24-pin pdip

ڕێکخستنی پین بۆ CS8401A-CP (پاکێجی 24-pin pdip). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 24-pin pdip بۆ CS8401A-CP

هیچ داتای وردی پینئاوت بەردەست نییە بۆ CS8401A-CP.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

CS8401A-CP گونجاوە بۆ 6 بەکارھێنانs: S/PDIF Digital Audio Output, Professional Playback Equipment, Digital Recording Systems, Legacy Audio Board Service, Digital Audio Test Equipment, Digital Mixer and Signal Routing.

🎧

S/PDIF Digital Audio Output

The CS8401A-CP is suitable for adding a standardized digital audio output to an audio board that currently produces audio in an internal parallel format. According to the manufacturer datasheet, the monolithic CMOS transmitter accepts audio and control data separately, performs multiplexing and biphase-mark encoding internally, and supports IEC 958 S/PDIF. Placing it between an upstream codec or digital processor and an S/PDIF output connector reduces the need for separate format-conversion logic. The system must still provide compliant clocking, supply voltage, output coupling, and grounding according to the electrical-characteristics table.

🔊

Professional Playback Equipment

The CS8401A-CP fits professional playback equipment requiring a dedicated digital transmission stage rather than a general-purpose interface controller. Its 2-channel transmitter architecture supports AES/EBU and IEC 958 S/PDIF, while internal multiplexing and biphase-mark encoding consolidate several digital-audio functions into one device. This is useful when the product must expose a conventional digital output to downstream amplifiers, recorders, or test equipment. Engineering attention should focus on source-clock relationship, output topology, and the choice between direct line drive and transformer coupling based on the installation environment.

🖥️

Digital Recording Systems

The CS8401A-CP can provide the standardized digital output used to transfer two-channel audio from a mixer or recorder to another digital device. Its support for AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 allows the transmitter to participate in established digital-audio environments rather than requiring a proprietary encoding stage. Internal multiplexing and biphase-mark encoding make the device especially relevant to designs that accept parallel audio and control information. Before implementation, verify the source format, sampling-rate support, clock requirements, and connector-level electrical details in the manufacturer datasheet.

🔧

Legacy Audio Board Service

The through-hole 24-pin PDIP package makes the CS8401A-CP relevant to repair and modernization of legacy digital-audio boards that use the same footprint and interface architecture. The device combines separate audio and control input handling with internal multiplexing and biphase-mark encoding, reducing the number of discrete encoding stages that must be reproduced. Service engineers should verify pin-for-pin assignments, supply requirements, clocking behavior, and output configuration against the manufacturer documentation. A mechanically similar IC is not an adequate replacement unless its complete pin and electrical functions are confirmed to match.

📺

Digital Audio Test Equipment

The CS8401A-CP can serve as the output stage in test equipment that generates standardized digital-audio signals for amplifier, converter, and cable testing. Its support for multiple established interface conventions allows one transmitter implementation to address AES/EBU, S/PDIF, and EIAJ CP-340 systems. The internal biphase-mark encoder and multiplexer reduce external logic complexity in a compact instrument. Calibration and test accuracy still depend on the upstream clock and source data, so the design must use controlled timing and verify output levels against the manufacturer electrical-characteristics tables.

🌐

Digital Mixer and Signal Routing

The CS8401A-CP is applicable to digital mixers and routing products that need to export two-channel audio through a standardized digital interface. It accepts audio and control data separately and handles multiplexing and biphase-mark encoding internally, simplifying the signal path between a processing engine and an external digital output. Direct transmission-line drive provides one connection option, while transformer coupling supports systems that need the interface characteristics associated with that topology. The implementation must account for channel mapping, clock consistency, grounding, and the exact output configuration required by the connected equipment.

What is the CS8401A-CP?
The CS8401A-CP is a 2-channel digital audio interface transmitter from Cirrus Logic housed in a 24-pin PDIP package. According to the manufacturer datasheet, it is a monolithic CMOS device that accepts audio and control data separately, performs multiplexing and biphase-mark encoding internally, and supports AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 interface standards.
What digital audio standards does CS8401A-CP support?
The CS8401A-CP supports AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 digital audio interfaces. According to the manufacturer datasheet, these standards govern the encoded digital audio transmission produced by the device. The internal multiplexing and biphase-mark encoder converts the accepted audio and control information into the required serial transmission format.
Does the CS8401A-CP encode the audio signal internally?
Yes, the CS8401A-CP performs multiplexing and biphase-mark encoding internally. According to the manufacturer datasheet, audio and control data enter through separate paths before being encoded for transmission. This integration reduces the need for separate external encoding components while preserving compatibility with S/PDIF-based digital audio systems.
What package is used by the CS8401A-CP?
The CS8401A-CP uses a 24-pin PDIP package and is mounted for through-hole PCB assembly. The 24-PDIP package identifies the physical variant of the CS8401A family, while the -CP suffix distinguishes it from other available family members. Use the manufacturer package drawing and pin-description table when laying out the PCB.
Can CS8401A-CP drive a transformer-coupled digital audio output?
Yes, the CS8401A-CP can drive a transmission line directly or through a transformer. According to the manufacturer datasheet, both output-drive approaches are supported by the transmitter architecture. The appropriate choice depends on the cable interface, grounding method, signal level, and system isolation requirements.
Where can I download the CS8401A-CP datasheet PDF?
The CS8401A-CP datasheet PDF is available from the manufacturer-document link listed on this page. According to the manufacturer datasheet, the document describes a monolithic CMOS digital audio interface transmitter supporting AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340. Use the pin-description table and electrical-characteristics sections for the production design.
Where can I find the CS8401A-CP pinout?
The CS8401A-CP pinout is identified in the manufacturer datasheet for the 24-pin PDIP package. Use the pin-description table and package drawing to assign signals, power, ground, clock, audio, control, and output connections. Do not infer pin functions from a similarly named family member because package suffixes can change physical configurations.
What can replace the CS8401A-CP?
No verified pin-to-pin replacement for the CS8401A-CP was established from the available cross-reference information. A valid replacement must specifically match the 24-pin PDIP footprint, pin functions, supported digital-audio standards, supply requirements, and clock configuration. Request engineering review before treating a functional transmitter as a drop-in substitute.
Is the CS8401A-CP the same as CS8401A-CS?
The CS8401A-CP and CS8401A-CS are distinct ordering variants within the CS8401A family, and the available information does not establish them as pin-compatible replacements. The CS8401A-CP is the 24-PDIP variant. Compare the exact package, pinout, electrical limits, and ordering table in the manufacturer documentation before substituting one variant for the other.
CS8401A-CP vs CS8402A-CP - which transmitter should I choose?
Choose the CS8401A-CP when the required 2-channel transmitter function and its verified 24-PDIP pinout match the design. The CS8402A appears in the same manufacturer document, but the available information does not establish identical pin compatibility or channel configuration. Compare the functional tables and pin assignments before selecting either device.
When should I choose the CS8401A-CP over another digital audio transmitter?
Choose the CS8401A-CP when the board requires a 2-channel transmitter with separate audio and control inputs, internal multiplexing, internal biphase-mark encoding, and support for AES/EBU, IEC 958 S/PDIF, or EIAJ CP-340. Its 24-PDIP package also suits through-hole legacy and service-oriented designs, although production designs may favor a surface-mount family member.
Is CS8401A-CP suitable for a S/PDIF digital audio output?
Yes, the CS8401A-CP is suitable for a S/PDIF digital audio output because it supports the IEC 958 S/PDIF standard. According to the manufacturer datasheet, it accepts audio and control data separately, performs the required multiplexing and biphase-mark encoding, and can drive a transmission line directly or through a transformer.
How much power and current does the CS8401A-CP use?
The CS8401A-CP is a monolithic CMOS digital audio transmitter, but its exact supply voltage, quiescent current, and output-current limits are not stated in the accessible product listing. According to the manufacturer datasheet, those values depend on operating conditions and configuration. Review the electrical-characteristics table before selecting the power supply and decoupling network.
Where can I buy the CS8401A-CP online?
Use the Request a Quote form on this page to request CS8401A-CP availability, lead time, and an order quotation. The part is listed as a Cirrus Logic 2-channel audio transmitter in a 24-PDIP package, but current stock and delivery schedules should be confirmed for the exact suffix before committing the component to a production schedule.
What is the price of the CS8401A-CP?
The current CS8401A-CP price should be requested through the Request a Quote form on this page. The available product listing does not provide a qualifying quantity-break price for the exact MPN, so no static price figure should be relied upon. The quote should specify the 24-pin PDIP variant, quantity, and required delivery schedule.
What is the lead time for the CS8401A-CP?
Request the current CS8401A-CP lead time through the Request a Quote form on this page. The product is identified as a 2-channel audio transmitter in a 24-PDIP package, but current manufacturing and inventory status can change. Include the required quantity, target delivery date, and approved-source requirements with the request.
Is the CS8401A-CP in stock?
The current CS8401A-CP stock status should be confirmed through the Request a Quote form on this page. The available listing identifies the exact 24-PDIP MPN as a Cirrus Logic audio transmitter, but live inventory is not represented as a guaranteed quantity. Request the quantity and lead time required for your production schedule.
What are the key specifications of CS8401A-CP that engineers should know?
The key CS8401A-CP specifications are its 2-channel transmitter function, monolithic CMOS construction, 24-pin PDIP package, separate audio and control inputs, internal multiplexing and biphase-mark encoding, and support for AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340. According to the manufacturer datasheet, the output may drive a line directly or through a transformer.

داتای سەرچاوەی ئەندازیاری بۆ CS8401A-CP — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the CS8401A-CP for a two-channel digital-audio design that specifically uses the 24-pin PDIP footprint and requires internal multiplexing and biphase-mark encoding with AES/EBU, IEC 958 S/PDIF, or EIAJ CP-340 support. It is particularly attractive for legacy through-hole boards, service replacements, and professional audio equipment that can benefit from direct or transformer-coupled output. Do not select it merely because another transmitter also outputs S/PDIF; verify all 24 pin assignments, clocking, supply limits, and control signals. No verified drop-in alternative was established for the exact MPN, so engineers should treat the CS8401A-CP as the approved reference device unless a manufacturer document explicitly confirms a replacement.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Product Type 2-channel digital audio interface transmitter
Brand Cirrus Logic
Package 24-pin PDIP
Process Technology Monolithic CMOS
Supported Standards AES/EBU, IEC 958 S/PDIF, EIAJ CP-340
Channel Count 2 channels
Internal Functions Multiplexing and biphase-mark encoding
Output Drive Options Direct line drive or transformer coupling

جیاکەرەوە سەرەکییەکان

  • Integrated digital-audio encoding (بەراورد بەDiscrete biphase encoder and multiplexer implementation)
  • Multiple established interface standards (بەراورد بەSingle-format proprietary transmitter)
  • Flexible output connection method (بەراورد بەDirect-output-only transmitter)

تێبینییەکانی دیزاین

Assign the CS8401A-CP signals directly from the 24-pin PDIP pin-description table and preserve the package orientation defined by the manufacturer drawing. Place the device where the encoded digital output can reach its connector or transformer with a short, continuous path. Keep the output return path continuous and avoid routing the high-speed digital output beneath unrelated analog or switching-converter power stages.

Choose the direct-drive or transformer-coupled configuration based on the required cable interface and grounding topology rather than treating the two outputs as interchangeable. Maintain a continuous return path and use the manufacturer-recommended interface components and transmission-line termination method. Validate the output waveform, rise and fall behavior, and cable compatibility with the final system configuration.

Do not assume that another CS8401A family suffix is a drop-in replacement merely because it has the same base number. The suffix can identify a different package or ordering configuration, while even devices in the same package may differ in channel count, control interface, or clock requirements. Compare every pin assignment, electrical limit, and supported interface before approving a substitution.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance declarations for the exact CS8401A-CP order code were not identified in the accessible product information.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

CS8401A-CP datasheet CS8401A-CP pinout CS8401A-CP datasheet pdf CS8401A-CP equivalent CS8401A-CP replacement CS8401A-CP cross reference CS8401A-CP footprint CS8401A-CP price CS8401A-CP stock Cirrus Logic CS8401A-CP CS8401A-CP digital audio transmitter CS8401A-CP S/PDIF output

پێکهاتە و زاراوە پەیوەندیدارەکان

Cirrus Logic CS8401A-CP CS8401A CS8402A digital audio interface transmitter digital audio transmitter audio interface IC interface IC semiconductor monolithic CMOS AES/EBU IEC 958 S/PDIF EIAJ CP-340 biphase-mark encoding multiplexing 24-pin PDIP PDIP package through-hole mounting digital audio interface two-channel audio transformer-coupled output transmission-line driver professional audio equipment digital recording system
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ