CY8C3446LTI-073 - 50MHz 64KB PSoC 3 MCU | Infineon
MPN: CY8C3446LTI-073 ✓ چالاکCY8C3446LTI-073 گشتی
A PSoC 3 is a mixed-signal microcontroller platform in which programmable digital blocks, analog peripherals, and standard serial interfaces share configurable hardware. This device belongs to the CY8C34xx family and provides the broader PSoC hierarchy of microcontroller, embedded mixed-signal processor, and configurable SoC. Instead of relying on a fixed collection of peripherals alone, designers can use universal digital blocks and configurable analog functions to implement application-specific control, measurement, and communication logic.
The CY8C3446LTI-073 combines a 64 kByte flash program memory capacity with 8 kByte SRAM, 2 kByte data EEPROM, and 8 kByte ECC flash. Its 8051 processing core operates up to 50 MHz and includes a peripheral hub with eight parallel access paths. The programmable architecture also includes 24 universal digital blocks, a configurable ADC unit, 27 interrupt sources with eight priority levels, and dual datapointers for efficient data handling.
Communication and signal-chain requirements are handled through USB plus serial connectivity, programmable digital logic, and analog conversion resources. The 1.71 V minimum operating voltage supports low-voltage embedded systems, while the 5.5 V maximum expands the available external supply options. A maximum of 25 I/O allows the device to connect sensors, actuators, human-interface components, and external interface circuits while conserving board area in a compact QFN package.
Typical uses include industrial temperature and process control, USB-connected data-acquisition equipment, programmable sensor interfaces, serial protocol bridges, low-power monitoring nodes, and compact embedded control systems. The combination of configurable digital blocks and analog resources is particularly useful when a design needs protocol handling or signal conditioning alongside conventional embedded-control tasks.
PCB implementation requires careful attention to the 48-QFN footprint, exposed-pad thermal path, decoupling, and high-speed signal routing. Keep supply and ground connections short, provide the required bypass capacitance near the power pins, and follow the manufacturer footprint and layout guidance to preserve signal integrity and thermal performance.
This product overview consolidates the key electrical, memory, connectivity, packaging, and application characteristics of the CY8C3446LTI-073. It also provides practical design guidance, an honest replacement assessment, and structured comparisons for engineers evaluating the MCU for new or existing 8051-based designs.
جێگرەوەکانی جێگۆڕکێ بۆ CY8C3446LTI-073 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY8C3446LTI-073 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, CPU Architecture, CPU Core, Package Type.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەCY8C3446LTI-073 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | PSoC 3 programmable system-on-chip microcontroller (8-bit architecture) |
| CPU Core | 8051 single-core processor (8-bit architecture) |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 64 kByte (64K x 8 bits) |
| SRAM | 8 kByte |
| Data EEPROM | 2 kByte |
| ECC Flash | 8 kByte |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Programmable I/O Count | 25 I/O |
| Universal Digital Blocks | 24 blocks |
| Configurable ADC Units | 1 unit |
| Peripheral Hub Access Paths | 8 parallel paths |
| Interrupt Sources | 27 sources |
| Interrupt Priority Levels | 8 levels |
| Datapointers | 2 datapointers |
| Connectivity | USB plus serial connectivity |
| پاکێج | 48-QFN, 7 x 7 mm |
| Temperature Grade | Industrial grade |
| جۆری دامەزراندن | Surface-mount no-lead package |
| دۆخی RoHS | Compliant |
| Flash Protection Levels | 4 levels |
ڕێنمایی ڕێکخستنی پینی CY8C3446LTI-073 48-qfn, 7 x 7 mm
ڕێکخستنی پین بۆ CY8C3446LTI-073 (پاکێجی 48-qfn, 7 x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY8C3446LTI-073.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY8C3446LTI-073 گونجاوە بۆ 6 بەکارھێنانs: Industrial Temperature and Process Control, USB Data-Acquisition Equipment, Programmable Sensor Interface, Serial Protocol Bridge, Compact Embedded Monitoring Node, Programmable Logic Control Panel.
Industrial Temperature and Process Control
The CY8C3446LTI-073 fits compact industrial controllers because its 8051 CPU operates up to 50 MHz while 24 universal digital blocks can implement timing, state-machine, and interface functions alongside the configurable ADC. With 25 I/O and a 1.71 V to 5.5 V operating range, the device can connect sensors, actuators, status indicators, and communications circuits on one controller. The 48-QFN, 7 x 7 mm package reduces board area, while the 8 kByte SRAM provides working memory for control algorithms and acquisition buffering. A practical design should use the ADC and digital resources according to the manufacturer application guidance, maintain short analog paths, and verify industrial temperature requirements before production release.
پێشنیارکراو
USB Data-Acquisition Equipment
The CY8C3446LTI-073 is appropriate for USB data-acquisition equipment because it combines USB plus serial connectivity with a configurable ADC and programmable digital logic. Its 64 kByte flash supports device firmware, while 8 kByte SRAM can hold acquisition and control data, and the 50 MHz 8051 core provides responsive peripheral handling. The programmable blocks can support trigger logic, counters, protocol states, or signal conditioning logic that would otherwise require additional devices. In an implementation, the MCU should aggregate sensor inputs, perform conversion and filtering, then transmit results over USB. Layout must provide clean analog grounding, short traces from the ADC inputs, effective supply bypassing, and controlled impedance routing for the USB interface.
پێشنیارکراو
Programmable Sensor Interface
The CY8C3446LTI-073 can consolidate a programmable sensor interface by combining 25 I/O, a configurable ADC, and 24 universal digital blocks in one device. At a maximum CPU frequency of 50 MHz, it can manage acquisition, filtering, threshold detection, calibration, and communications without requiring separate programmable logic. Its 1.71 V to 5.5 V range accommodates low-voltage sensors as well as common industrial supply levels, while 8 kByte SRAM supports working buffers and the 64 kByte flash holds configuration and firmware. The application benefits most when several sensor channels or custom timing functions share one board. Designers should follow the datasheet for analog pin selection, reference routing, filtering, and calibration, and should reserve testing points for firmware diagnostics.
پێشنیارکراو
Serial Protocol Bridge
The CY8C3446LTI-073 is well suited to a serial protocol bridge because it combines USB plus serial connectivity with configurable programmable logic. The 8051 core can run at up to 50 MHz, allowing protocol conversion and buffering to occur concurrently, while the peripheral hub provides eight parallel access paths for efficient data movement. Its 64 kByte flash and 8 kByte SRAM are sufficient for firmware, lookup tables, and active transfer buffers in many bridge designs. Universal digital blocks can implement additional framing, timing, or level-detection functions when required. The implementation should establish clear buffer limits and timeout behavior, validate incoming data before forwarding it, and use termination and protection networks appropriate to the external interface. The compact QFN package also leaves more PCB area for connectors and protection components.
پێشنیارکراو
Compact Embedded Monitoring Node
The CY8C3446LTI-073 can form a compact monitoring node that measures analog conditions, evaluates thresholds, records events, and reports status through USB or serial links. Its configurable ADC, 24 universal digital blocks, and 25 I/O reduce the need for separate interface logic, while 64 kByte flash and 8 kByte SRAM provide resources for firmware and runtime data. The 48-QFN package is useful where board area is constrained, although the exposed thermal pad still requires a sound copper and via arrangement. For low-power operation, the design should use the manufacturer's clock, sleep, and wake-up guidance and disable unused resources. Firmware should include sensor validation, communication retries, and fault flags so a monitoring node can report degraded conditions instead of presenting stale or implausible measurements.
پێشنیارکراو
Programmable Logic Control Panel
The CY8C3446LTI-073 is useful in a programmable control panel because 24 universal digital blocks can implement custom timing, debouncing, interlocks, and output sequencing around the 8051 CPU. Its 25 I/O support switches, indicators, relays, and interface signals, and the configurable ADC can monitor panel conditions such as supply voltage or sensor status. The 50 MHz maximum clock provides ample control-loop performance for typical human-interface and automation tasks. Programmable resources make the design adaptable without changing the MCU, while 64 kByte flash and 8 kByte SRAM allow structured event logic and local state. The panel designer should use the manufacturer pin-description table for all I/O assignments, add suitable protection for exposed connector pins, and separate noisy relay or switching loads from sensitive analog and communication traces.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY8C3446LTI-073 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 48-QFN, 7 x 7 mm |
| Brand | Infineon Technologies |
| CPU Architecture | 8-bit 8051 |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 64 kByte |
| SRAM | 8 kByte |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Programmable I/O | 25 I/O |
| Universal Digital Blocks | 24 blocks |
| Connectivity | USB plus serial connectivity |
جیاکەرەوە سەرەکییەکان
- Configurable mixed-signal integration (بەراورد بەATtiny48PA-MN)
- Substantially larger integrated memory set (بەراورد بەATTINY13A-SUR)
- Broad low-voltage operating range (بەراورد بەATMEGA1609-MF)
تێبینییەکانی دیزاین
Use the manufacturer land pattern for the 48-QFN, 7 x 7 mm package and preserve the exposed-pad connection beneath the device. Place input and output bypass capacitors close to their associated supply pins, with a low-impedance ground return. Avoid routing sensitive ADC traces beneath or alongside digital switching paths, and follow the pin-description table when assigning mixed-signal functions to the 25 available I/O.
Treat the exposed thermal pad as a primary heat-spreading and electrical-connection feature. Provide a continuous copper area with multiple thermal vias where permitted by the manufacturer layout guidance, then connect that area to the system ground strategy. Validate the final thermal performance at the highest expected ambient temperature and processor activity; package size alone does not guarantee adequate cooling for a densely routed board.
Keep USB and serial signal paths short, continuous, and referenced to a stable ground plane. Apply the manufacturer's interface-layout recommendations, keep the connector return path close to the signal path, and separate switching-node or high-current traces from analog inputs. If the USB interface is used, validate signal integrity and enumeration across the intended cable, connector, and board configurations rather than relying only on schematic connectivity.
Do not treat the PSoC 3's 24 universal digital blocks and configurable analog resources as unused peripherals that can be arbitrarily assigned after PCB fabrication. Plan their configuration, clocking, routing, and firmware dependencies before layout. Also verify the exact ordering suffix, temperature grade, tray versus tape-and-reel requirement, and package revision before releasing a production order.
زانیاری پابەندبوون
RoHS-compliant status is identified in the product listing. The device is listed as industrial grade; no separate automotive qualification claim is present.