Microchip Technology

ATSAMD20G18A-MN - 48MHz Cortex-M0+ MCU, 256KB Flash | Microchip

MPN: ATSAMD20G18A-MN ✓ چالاک
1.6 V to 3.6 V Vdss 48-QFN, 7 x 7 mm Package 48 MHz Speed 256 KB Memory
MOQ: 1 |

ATSAMD20G18A-MN گشتی

The Microchip Technology ATSAMD20G18A-MN is a 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, with 256 KB of program flash and 32 KB of SRAM in a 48-QFN package measuring 7 x 7 mm. It supports a 1.6 V to 3.6 V operating range and is identified by Microchip as a green, industrial-temperature device rated to 105°C. These characteristics position the ATSAMD20G18A-MN as a compact embedded-control solution for home automation, consumer equipment, metering, and industrial applications.

A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals onto one device. The ARM Cortex-M0+ core provides a compact instruction set suited to cost-sensitive embedded systems, while the SAM D20 family adds mixed-signal and control peripherals around that core. The ATSAMD20G18A therefore belongs to the embedded microcontroller hierarchy: microcontroller, 32-bit MCU, ARM Cortex-M0+ MCU, and SAM D20 series.

Principal features include 256 KB of flash for firmware storage, 32 KB of SRAM for working memory, and a maximum clock frequency of 48 MHz. The associated device documentation identifies a 12-bit ADC, a 10-bit DAC, a 256-channel peripheral touch controller, and an RTC. These resources support acquisition, signal generation, capacitive user-interface sensing, and timekeeping without requiring separate devices for every function.

The 48-QFN package exposes the device in a compact land pattern suitable for high-density boards. Because the exposed-pad construction affects both assembly and thermal performance, PCB copper and soldering should follow Microchip's package recommendations. Firmware development is supported through the Cortex-M0+ programming ecosystem, including the standard ARM Cortex-M debugging and programming interfaces implemented by the device family.

Typical uses include connected home controls, smart energy meters, consumer appliances, industrial sensing nodes, and compact sensor-hub products. The 48 MHz core provides useful performance margin for protocol handling and control loops, while the integrated ADC, DAC, PTC, and RTC reduce board size and external component count.

A critical design consideration is the 1.6 V to 3.6 V supply range. The supply rail, decoupling network, peripheral I/O levels, and programming interface must all be checked for voltage compatibility before layout release. Use the manufacturer pin-description table and package drawing to assign every PCB track and confirm exposed-pad connection and thermal strategy.

This page combines the manufacturer family specifications with practical selection guidance, package-level engineering context, and same-footprint Microchip alternatives for engineers evaluating a compact Cortex-M0+ control platform.

جێگرەوەکانی جێگۆڕکێ بۆ ATSAMD20G18A-MN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATSAMD20G18A-MN (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, SRAM, RoHS Status, ADC, Core Architecture.

Microchip Technology
Package: 64-pin QFN (HVQCCN)
RoHS Status: Compliant (per Mouser listing)
ADC: 12-bit, up to 16 channels, 350 ksps
بەراوردکردن لەگەڵ ATSAMD20G18A-MN →
Microchip Technology
Package: 48-QFN (7x7 mm) with exposed pad
SRAM: 4 KB
RoHS Status: Compliant (Green)
بەراوردکردن لەگەڵ ATSAMD20G18A-MN →
Microchip Technology
Package: 48-pin QFN (7x7 mm)
RoHS Status: Compliant (Green)
ADC: 12-bit, up to 350 ksps, up to 20 channels
بەراوردکردن لەگەڵ ATSAMD20G18A-MN →

ATSAMD20G18A-MNT

✅ جێگرەوەی ڕاستەوخۆ
📦 48-QFN (7 x 7 mm)
Same ATSAMD20G18A device and 48-QFN footprint; ordering suffix changes the packing configuration, with no listed change to the 48 MHz, 256 KB flash, 32 KB SRAM, or 1.6-3.6 V ratings

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATSAMD20J18A-MN

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 48-QFN (7 x 7 mm)
ARM Cortex-M0+ (32-bit) · 48 MHz · 2.14 · 256 KB · 32 KB · 1.62 V to 3.63 V · 64-pin QFN (HVQCCN) · Surface Mount

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAMD21G18A-MN

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 48-QFN (7 x 7 mm)
Retains 48 MHz operation, 256 KB flash, 32 KB SRAM, and the 48-QFN form factor; SAM D21 peripheral assignments and electrical details differ from the SAM D20 target

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATSAMD21G18A-MU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 48-QFN (7 x 7 mm)
ARM Cortex-M0+ (32-bit) · SAM D21 (FuSa / IEC 60730 Class B) · 48 MHz · 256 KB · 32 KB · 1.62 V to 3.6 V · -40 C to +85 C (industrial) · 48-pin QFN (7x7 mm)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAMD21G18A-MZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 48-QFN (7 x 7 mm)
Shares the SAM D21 G18 48 MHz, 256 KB flash, and 32 KB SRAM resource profile in a 48-QFN format; ordering and pin-function differences require review

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATSAMD20G18A-MN زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit ARM Cortex-M0+ flash microcontroller
Manufacturer Microchip Technology
Series SAM D20
Maximum CPU Frequency 48 MHz
Flash Memory 256 KB
SRAM 32 KB
Architecture 32-bit
Processor Core Arm Cortex-M0+
ڤۆڵتاژی دابینکردنی کارکردن 1.6 V to 3.6 V
پاکێج 48-QFN, 7 x 7 mm
Package Pin Count 48 pins
جۆری دامەزراندن Surface mount
Maximum Operating Temperature 105°C
ADC Resolution 12 bits
DAC Resolution 10 bits
Peripheral Touch Controller Channels 256 channels
RTC Yes
Green Classification Green

ڕێنمایی ڕێکخستنی پینی ATSAMD20G18A-MN 48 pins

ڕێکخستنی پین بۆ ATSAMD20G18A-MN (پاکێجی 48 pins). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 48 pins بۆ ATSAMD20G18A-MN

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATSAMD20G18A-MN.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ATSAMD20G18A-MN گونجاوە بۆ 6 بەکارھێنانs: Smart Home Control Module, Smart Metering and Energy Sensing, Industrial Sensor and Condition Monitoring, Consumer Appliance Embedded Control, Capacitive Touch User Interface, Programmable Control and Data Acquisition.

🧩

Smart Home Control Module

The ATSAMD20G18A-MN fits compact smart-home controllers that combine local sensing, user input, and network-connected control. Its 48 MHz Cortex-M0+ core provides performance headroom for event handling and communications, while 256 KB of flash stores application firmware and 32 KB of SRAM supports protocol buffers. The integrated 12-bit ADC can monitor analog sensor nodes, and the 256-channel peripheral touch controller can support capacitive controls without separate sensing ICs. A 1.6-3.6 V operating range simplifies integration with low-voltage system rails, although the selected wireless or Ethernet module must use compatible logic levels.

⚡

Smart Metering and Energy Sensing

The ATSAMD20G18A-MN is suitable for metering peripherals that measure analog quantities, timestamp events, and communicate results through a host interface. The 12-bit ADC supports voltage or current-sensor front ends, while the RTC provides a time reference for time-stamped energy records. With 256 KB of flash and 32 KB of SRAM, the device can maintain calibration tables, accumulate interval data, and support communication firmware in one controller. Attention should be paid to analog reference quality, input filtering, and the separation between sensitive measurement and switching-converter sections of the PCB.

🏭

Industrial Sensor and Condition Monitoring

The ATSAMD20G18A-MN can act as the local controller in a compact industrial condition-monitoring node. It samples analogue sensor conditions through the 12-bit ADC, applies filtering or threshold logic at up to 48 MHz, and records events in flash or transmits them through a communications module. The industrial 105°C rating supports deployments across a broad temperature range, but enclosure heating and self-heating must still be evaluated. Provide local decoupling close to the supply pins and route sensitive analogue inputs away from switching nodes and high-current traces.

🔧

Consumer Appliance Embedded Control

The ATSAMD20G18A-MN provides enough flash, SRAM, and mixed-signal capability for compact consumer-appliance controllers that manage motors, heaters, displays, or front-panel controls. Its 10-bit DAC can generate an analogue control or reference signal, while the ADC supports feedback and diagnostics. The 48-QFN footprint reduces board area in space-constrained appliances, and the 1.6 V to 3.6 V range permits integration with efficient multi-rail power designs. For motor or heater systems, isolate switching stages from the analogue section and verify that all external loads remain within the MCU's absolute-maximum ratings.

📱

Capacitive Touch User Interface

The integrated 256-channel peripheral touch controller makes the ATSAMD20G18A-MN suitable for capacitive keypads and touch panels. Firmware can scan touch channels, apply debounce and gesture logic, and report events while the Cortex-M0+ core performs supporting control functions. The ADC and DAC resources can assist with analog calibration or signal generation, reducing external component demand. PCB design is especially important here: use the manufacturer's touch-controller reference layout, maintain the specified electrode spacing, and keep high-current switching paths away from the sensitive touch traces.

🖥️

Programmable Control and Data Acquisition

The ATSAMD20G18A-MN works as a compact embedded control platform for programmable measurement equipment that needs deterministic sampling, local configuration storage, and flexible I/O. Its 48 MHz core can handle sampling control and protocol tasks, while 256 KB of flash and 32 KB of SRAM provide space for configuration data and short acquisition buffers. The 12-bit ADC supports analog acquisition, and the RTC can time-stamp records. Design the analogue front end around the ADC reference and input limits, then use the package documentation to assign unused pins and the exposed pad correctly.

کورتەی بەرهەمە پێشنیارکراوەکان

ATSAMD20G18A-MNT Same-device 48-QFN option for automated tape-and-reel assembly بەکارهێنراوە لە: Smart Home Control Module, Smart Metering and Energy Sensing, Industrial Sensor and Condition Monitoring, Consumer Appliance Embedded Control, Capacitive Touch User Interface, Programmable Control and Data Acquisition ATSAMD21G18A-MN Next-generation SAM family option for new smart-home designs بەکارهێنراوە لە: Smart Home Control Module, Smart Metering and Energy Sensing, Consumer Appliance Embedded Control, Capacitive Touch User Interface ATSAMD20J18A-MN Microchip Technology بەکارهێنراوە لە: Industrial Sensor and Condition Monitoring, Programmable Control and Data Acquisition
What is the ATSAMD20G18A-MN?
The ATSAMD20G18A-MN is a Microchip Technology 32-bit ARM Cortex-M0+ flash microcontroller rated up to 48 MHz, with 256 KB of flash and 32 KB of SRAM. It is packaged in a 48-QFN measuring 7 x 7 mm and operates from 1.6 V to 3.6 V. According to the Microchip ATSAMD20G18 product page, the device targets home automation, consumer, metering, and industrial applications.
What is the operating voltage of ATSAMD20G18A-MN?
The ATSAMD20G18A-MN operates from 1.6 V to 3.6 V. This range matches the manufacturer listing for the 48-QFN device and is suitable for low-voltage embedded systems. Check the datasheet power-supply characteristics when designing the decoupling network, and ensure every connected I/O device shares a compatible logic level.
How much memory does ATSAMD20G18A-MN have?
The ATSAMD20G18A-MN provides 256 KB of flash memory and 32 KB of SRAM. The Microchip family page identifies 256 KB of flash for firmware storage and 32 KB of SRAM for runtime data. These figures make the device suitable for control loops, communications handlers, and moderate local data buffering without external memory.
What peripherals are integrated in ATSAMD20G18A-MN?
The ATSAMD20G18A-MN family documentation identifies a 12-bit ADC, a 10-bit DAC, a 256-channel peripheral touch controller, and an RTC. These peripherals support analog measurement, signal generation, capacitive touch sensing, and timekeeping. The datasheet should be checked for channel counts, trigger behavior, and electrical limits before assigning external analog circuitry.
Where can I download the ATSAMD20G18A-MN datasheet PDF?
The ATSAMD20G18A-MN datasheet is available through the Microchip ATSAMD20G18 family documentation and the linked ATSAMD20G18 datasheet record. The family document covers the Cortex-M0+ core, memory, peripherals, electrical characteristics, pin descriptions, and package drawings. Use the manufacturer document for the authoritative pin mapping and expose-pad connection instructions.
Where can I find the ATSAMD20G18A-MN pinout?
The ATSAMD20G18A-MN pinout is found in the pin-description table and package drawing of the manufacturer ATSAMD20G18 datasheet. The device uses a 48-QFN, 7 x 7 mm package, so its land pattern must follow that drawing rather than a generic 48-pin quad package. Confirm every signal name, exposed-pad connection, and recommended land-pattern dimension before fabrication.
What is the best drop-in replacement for ATSAMD20G18A-MN?
The closest same-footprint option is ATSAMD20G18A-MNT, which retains the ATSAMD20G18A device identity and 48-QFN package but uses a different orderable packing code. Before substitution, compare the ordering temperature, packing, and shipping requirements and confirm that the intended footprint matches the MNT land pattern. For functional upgrades, evaluate ATSAMD21G18A-MN against the complete pin and peripheral requirements rather than footprint alone.
Can ATSAMD20G18A-MNT replace ATSAMD20G18A-MN?
Yes, ATSAMD20G18A-MNT is the closest orderable alternative because it identifies the same ATSAMD20G18A device in a 48-QFN package with 256 KB of flash and 32 KB of SRAM. The MNT ordering suffix represents a different packing configuration from the target MPN. Verify the tray or tape-and-reel requirement and confirm the manufacturer ordering information before release.
ATSAMD20G18A-MN vs ATSAMD21G18A-MN: which is better?
The ATSAMD20G18A-MN is the direct choice when firmware and board layouts are already based on the SAM D20 platform. ATSAMD21G18A-MN belongs to the later SAM D21 family and can suit new designs where its peripheral set and device features are preferred, but its pin functions and electrical behavior must be reviewed before substitution. The comparison tools list both devices, while the manufacturer datasheets remain authoritative for compatibility.
When should I choose ATSAMD20G18A-MN instead of ATSAMD21G18A-MN?
Choose the ATSAMD20G18A-MN when an established SAM D20 design, software stack, or 48-QFN layout must be preserved. It provides a 48 MHz Cortex-M0+ core, 256 KB of flash, 32 KB of SRAM, and integrated mixed-signal resources in a compact package. Select the SAM D21 family for a new platform only after reviewing pin mappings, peripheral behavior, supply requirements, and migration documentation.
Is ATSAMD20G18A-MN suitable for home automation and metering?
Yes, the ATSAMD20G18A-MN is suitable for compact home-automation controllers, smart-meter peripherals, and industrial sensing nodes. Its 48 MHz Cortex-M0+ core supports responsive control and communications processing, while 256 KB of flash accommodates embedded firmware. The integrated 12-bit ADC, RTC, DAC, and 256-channel PTC reduce the need for separate peripheral devices.
Does ATSAMD20G18A-MN need an external crystal?
The ATSAMD20G18A-MN supports the clock architecture specified for the SAM D20 family, but the required clock source depends on the device's internal oscillator configuration, accuracy requirements, and operating mode. Use the clock-system and recommended circuit diagrams in the manufacturer datasheet. Do not assume that the maximum CPU frequency requires an external crystal unless the application-note guidance explicitly calls for one.
How should the 48-QFN ATSAMD20G18A-MN be mounted?
The ATSAMD20G18A-MN should be assembled on a PCB land pattern derived from the manufacturer's 48-QFN drawing, including the thermal or electrical requirements for the exposed pad. Follow the stated reflow profile, solder-mask and paste-land guidance, and board-level thermal design. The exposed pad may require thermal vias, and its connectivity must not be inferred without checking the datasheet.
Is ATSAMD20G18A-MN in stock and what is its lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page because availability changes by package, region, and order quantity. The manufacturer markets the ATSAMD20G18 family as a low-power embedded MCU platform, but a distributor listing alone does not guarantee the quantity or delivery date needed for a build. Submit the required quantity and target date with the quote request.
Where can I buy ATSAMD20G18A-MN online?
Use the Request a Quote form on this page to request ATSAMD20G18A-MN pricing, stock confirmation, and a delivery commitment for the required quantity. The Request a Quote workflow supports exact-MPN sourcing without relying on changing marketplace inventory. Include the target package, order quantity, destination, and required ship date so procurement can confirm the appropriate supply channel.
What are the key specifications of ATSAMD20G18A-MN that engineers should know?
The ATSAMD20G18A-MN combines a 48 MHz 32-bit Arm Cortex-M0+ core with 256 KB of flash, 32 KB of SRAM, and a 1.6 V to 3.6 V operating range in a 48-QFN, 7 x 7 mm package. Microchip identifies a 12-bit ADC, 10-bit DAC, 256-channel PTC, and RTC for mixed-signal and control designs. The maximum listed temperature is 105°C, making the device suitable for industrial-temperature embedded systems.

داتای سەرچاوەی ئەندازیاری بۆ ATSAMD20G18A-MN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ATSAMD20G18A-MN when a compact 48-QFN controller needs a 32-bit Cortex-M0+ core, 256 KB of flash, 32 KB of SRAM, and integrated analog, DAC, touch, and RTC resources. It is particularly attractive for metering, industrial sensing, smart-home controls, and compact consumer appliances operating from a 1.6 V to 3.6 V rail. Use ATSAMD20G18A-MNT when the same device and electrical configuration are needed with a different manufacturer packing arrangement. Consider ATSAMD21G18A-MN for a new SAM D21-based platform, but treat it as a migration choice because pin multiplexing and peripheral behavior can change. ATSAMD20J18A-MN is appropriate when its J18 peripheral configuration meets the design requirements. For any same-package substitution, verify the complete pin-description table, exposed-pad connection, electrical limits, programming configuration, and firmware support before committing to production.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ATSAMD20G18A-MNT ATSAMD20J18A-MN ATSAMD21G18A-MN ATSAMD21G18A-MU ATSAMD21G18A-MZ
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-QFN (7 x 7 mm) 48-QFN (7 x 7 mm) 48-QFN (7 x 7 mm) 48-QFN (7 x 7 mm) 48-QFN (7 x 7 mm) 48-QFN (7 x 7 mm)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 256 KB 256 KB 256 KB 256 KB 256 KB 256 KB
SRAM 32 KB 32 KB 32 KB 32 KB 32 KB 32 KB
Operating Voltage 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
ADC Resolution 12 bits 12 bits 12 bits 12 bits 12 bits 12 bits
DAC Resolution 10 bits 10 bits 10 bits 10 bits 10 bits 10 bits
Peripheral Touch Channels 256 channels 256 channels 256 channels 256 channels 256 channels 256 channels
Maximum Operating Temperature 105°C 105°C 105°C 105°C 105°C 105°C

جیاکەرەوە سەرەکییەکان

  • Direct same-device sourcing path for the same 48-QFN footprint (بەراورد بەATSAMD20G18A-MNT)
  • Higher CPU frequency than basic 8-bit microcontrollers used in simple controllers (بەراورد بەMC9S08SH8CTGR)
  • Integrated mixed-signal resources reduce external component count (بەراورد بەATMEGA88A-CCU)
  • Higher clock rate and larger flash budget than the selected 16-bit MSP430 option (بەراورد بەMSP430F133IPMR)

تێبینییەکانی دیزاین

Use the manufacturer 48-QFN land pattern rather than a generic quad package footprint, and verify the exposed-pad connection against the pin-description table. Keep the exposed-pad thermal path in mind by using the recommended copper and, where advised, thermal-via pattern. Place local decoupling at the supply pins with short ground returns, and separate sensitive analogue inputs from switching-node and high-current traces.

Design the 1.6 V to 3.6 V supply rail so that its voltage and transient behavior remain within the device limits during startup, load changes, and brownout conditions. Confirm that every external interface uses a logic level compatible with the selected rail rather than assuming 3.3 V tolerance for every pin. Follow the manufacturer power-up and decoupling recommendations, and include the required supply pins in schematic review rather than focusing only on named functional signals.

For analog measurement, route the ADC input as a short, guarded trace away from switching regulators, relays, and high-current load paths. Use a quiet reference source and filter according to the datasheet guidance. For capacitive touch, copy the recommended electrode geometry and reference layout because trace length, copper area, and nearby conductors can materially change channel readings. Validate the final board with the manufacturer's touch-tuning procedure.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The device is identified as green and specified for operation to 105°C. Formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not stated in the referenced product information, so those fields remain unknown.

داتا پشتڕاستکراوەتەوە لە: 2026-11-15 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ATSAMD20G18A-MN datasheet ATSAMD20G18A-MN datasheet pdf ATSAMD20G18A-MN pinout ATSAMD20G18A-MN specifications Microchip ATSAMD20G18A-MN ATSAMD20G18A 48MHz Cortex-M0+ ATSAMD20G18A-MN 48 QFN ATSAMD20G18A-MN equivalent ATSAMD20G18A-MN replacement ATSAMD20G18A-MN cross reference ATSAMD20G18A-MN vs ATSAMD21G18A-MN ATSAMD20G18A-MN smart meter application ATSAMD20G18A-MN price ATSAMD20G18A-MN stock ATSAMD20G18A 48-QFN footprint

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology ATSAMD20G18A-MN ATSAMD20G18A-MNT ATSAMD20J18A-MN ATSAMD21G18A-MN SAM D20 SAM D21 Arm Cortex-M0+ microcontroller embedded microcontroller 32-bit MCU flash memory SRAM 48-QFN QFN package family surface mount 12-bit ADC 10-bit DAC 256-channel peripheral touch controller real-time clock home automation smart metering industrial sensing 1.6 V to 3.6 V operating range 48 MHz operating frequency
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ