Maxim Integrated

DG442DY+ Quad SPST Analog Switch | Maxim Integrated

MPN: DG442DY+ ✓ چالاک
85 ohm Rds(on) 16-lead SOIC, 3.9 mm x 9.9 mm x 1.55 mm Package
MOQ: 1 |

DG442DY+ گشتی

The Maxim Integrated DG442DY+ is a four-channel, single-pole single-throw CMOS analog switch with a 1:1 signal configuration, 85 ohm typical on-resistance, and a 16-pin SOIC package. It provides four independently controlled switches for routing analog or digital signals in test, measurement, instrumentation, and communication equipment.

A CMOS analog switch is a semiconductor-based selection device that connects or isolates signal paths under digital control. Unlike a mechanical relay, it operates without moving contacts, allowing faster switching and compact integration. The DG442DY+ belongs to the analog-switch hierarchy, where each SPST channel provides one conductive path and a separate control input. Its four-channel structure consolidates multiple routing functions into one package while keeping the PCB footprint straightforward.

The principal benefits are low on-resistance, low leakage, low power consumption, and improved matching and flatness among the four channels. Maxim describes the redesigned DG441/DG442 family as providing on-resistance matching within 4 ohms maximum between switches and on-resistance flatness within 9 ohms maximum over the signal range. The low-resistance behavior helps minimize signal attenuation when the switch is closed, while matching reduces channel-to-channel gain and timing inconsistencies in precision circuits.

The DG442DY+ uses CMOS construction to limit power consumption and provide high input impedance. Each channel can connect its corresponding terminal to its common terminal when asserted. Because the device has four independent control inputs, it can route different signals simultaneously. Designers should still account for switch logic polarity, signal-level limits, off-state leakage, charge injection, and switching transients when evaluating precision or high-impedance applications.

Typical uses include automated test equipment, data-acquisition systems, sample-and-hold circuits, signal multiplexing, instrumentation front ends, and communication equipment. The same four-channel structure can also be used to connect external sensors, select measurement paths, isolate signal sources, or implement controlled signal-routing networks where the system requires more than one independent analog connection.

For PCB implementation, place the device close to the routed signal paths to minimize trace resistance and capacitance. Keep sensitive analog traces away from high-energy switching nodes, provide a stable ground reference, and use the manufacturer pin-description table when assigning controls and common terminals. Decoupling and exposed-pad requirements are package-specific; verify the exact lead configuration and land pattern before releasing artwork.

This product reference combines the DG442DY+ electrical characteristics, package information, sourcing details, strict same-footprint alternatives, comparison data, and practical implementation guidance. It helps engineers evaluate the switch for signal-integrity, routing, and design-in decisions without relying on a simple distributor listing alone.

جێگرەوەکانی جێگۆڕکێ بۆ DG442DY+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ DG442DY+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, On-Resistance Flatness Over Signal Range, On-Resistance Matching Between Switches, Package, Switch Configuration.

Maxim Integrated
Mounting Type: Through-hole
On-Resistance Flatness Over Signal Range: 9 ohm max
On-Resistance Matching Between Switches: 4 ohm max
بەراوردکردن لەگەڵ DG442DY+ →

DG442DY

✅ جێگرەوەی ڕاستەوخۆ
📦 16-SOIC
On-resistance is listed as 85 ohm for both devices, a 0% listed difference; verify control polarity, supply limits, timing, leakage, and exact land pattern

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

DG442DY-E3

✅ جێگرەوەی ڕاستەوخۆ
📦 16-SOIC
On-resistance is listed as 85 ohm, matching the DG442DY+ listing rating with a 0% difference; the E3 production suffix requires separate temperature and packing verification

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

DG442DY-T1-E3

✅ جێگرەوەی ڕاستەوخۆ
📦 16-SOIC
On-resistance is listed as 85 ohm, matching the DG442DY+ listing rating with a 0% difference; the T1-E3 suffix changes the production configuration and must be checked separately

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

DG442DY+ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Quad SPST CMOS analog switch
Number of Circuits 4 circuits
Switch Configuration 1:1 SPST
Typical On-Resistance 85 ohm
On-Resistance Matching Between Switches 4 ohm maximum
On-Resistance Flatness Over Signal Range 9 ohm maximum
Low-Leakage Specification 80 pA
Power Consumption 0.2 mW
پاکێج 16-lead SOIC, 3.9 mm x 9.9 mm x 1.55 mm
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی DG442DY+ 16-lead soic, 3.9 mm x 9.9 mm x 1.55 mm

ڕێکخستنی پین بۆ DG442DY+ (پاکێجی 16-lead soic, 3.9 mm x 9.9 mm x 1.55 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-lead soic, 3.9 mm x 9.9 mm x 1.55 mm بۆ DG442DY+

هیچ داتای وردی پینئاوت بەردەست نییە بۆ DG442DY+.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

DG442DY+ گونجاوە بۆ 6 بەکارھێنانs: Automated Test Equipment Signal Routing, Data Acquisition Front End, Sensor Signal Multiplexing, Precision Signal Isolation, Sample-and-Hold Signal Selection, Communication Signal Routing.

🖥️

Automated Test Equipment Signal Routing

The DG442DY+ suits automated test equipment that must route several measurement or stimulus paths through a controlled switching matrix. Four independent SPST channels provide compact multiplexing without mechanical relays, while the manufacturer’s maximum matching specification of 4 ohms between switches helps limit channel-dependent attenuation. Each control signal can select one switched terminal for connection to its common terminal. Designers should still budget for off-state leakage, charge injection, and switching transients because these errors can affect high-impedance or precision measurements.

📊

Data Acquisition Front End

The DG442DY+ can select sensor or conditioned signal paths before an analog-to-digital converter in a data-acquisition front end. Its four-channel organization allows several inputs to share downstream conversion hardware, and the listed 85-ohm on-resistance helps minimize attenuation compared with a higher-resistance switch. Keep the device close to the ADC input to limit trace capacitance and noise pickup. The complete error budget should include leakage, charge injection, switching speed, and any required settling time after each control change.

🧩

Sensor Signal Multiplexing

The DG442DY+ is appropriate for multiplexing low-bandwidth sensor signals where four independently controlled routes are needed in a compact footprint. The SPST configuration can select one sensor at a time for a shared amplifier or measurement channel, helping reduce the number of external signal paths. Its CMOS implementation and listed 0.2-mW power-consumption characteristic suit low-power acquisition systems. Validate the signal amplitude, common-mode range, leakage, and source impedance because high-impedance sensors can expose small leakage and injection effects.

🔧

Precision Signal Isolation

The DG442DY+ can isolate a sensitive amplifier or measurement input from external test circuitry by opening an SPST path when it is not selected. This prevents unwanted signals from reaching downstream circuitry and provides four independently controlled isolation points. The family’s maximum on-resistance matching of 4 ohms helps maintain consistency when similar channels are compared. For very high source impedances or wide dynamic-range measurements, include off leakage and injected charge in the error analysis rather than relying only on the 85-ohm on-resistance figure.

⚡

Sample-and-Hold Signal Selection

The DG442DY+ can choose among four held or sampled signals before a sample-and-hold stage. Each SPST channel provides a direct route between a switched terminal and its common terminal, allowing the hold capacitor to charge from one selected source at a time. The device’s compact 16-lead SOIC package leaves board area for the storage and buffer stages. Select external capacitor and bandwidth values based on the required acquisition time, switch resistance, leakage, injected charge, and source impedance.

🌐

Communication Signal Routing

The DG442DY+ can route controlled communication signals when the design requires four isolated paths, compact logic, and low power consumption. Its independently controlled channels are useful for connecting or disconnecting line-driver outputs, receiver inputs, or test paths. The 85-ohm listed on-resistance may be acceptable for low-frequency routing but can become significant for high-speed signals because parasitic capacitance and bandwidth must be included. Verify signal swing, logic thresholds, off impedance, and switching transients before using the switch in an active communication path.

What is the DG442DY+?
The DG442DY+ is a Maxim Integrated four-channel CMOS analog switch with independent single-pole single-throw, or SPST, contacts. According to the manufacturer product page, the DG442 family includes improved matching and flatness, while the DG442DY+ is packaged in a 16-lead SOIC measuring 3.9 mm by 9.9 mm by 1.55 mm. The device is intended for compact analog and digital signal-routing circuits.
What are the key specifications of DG442DY+ that engineers should know?
The DG442DY+ provides four 1:1 SPST switch circuits in a 16-lead SOIC package with a listed typical on-resistance of 85 ohms. Maxim specifies maximum on-resistance matching of 4 ohms between switches and maximum on-resistance flatness of 9 ohms over the signal range. The associated family documentation also identifies low leakage and low power consumption as principal design characteristics for precision routing.
Where can I download the DG442DY+ datasheet PDF?
The official DG442 product page at Analog Devices is the appropriate starting point for the DG442DY+ datasheet, package information, and ordering resources. It identifies the DG442DY+T as a 16-lead SOIC version and provides links to manufacturer documentation and package resources. Use that documentation to verify the exact pin assignment, recommended operating conditions, electrical characteristics, and land pattern before finalizing a PCB design.
Where can I find the DG442DY+ pinout?
The DG442DY+ pinout should be taken from the pin-description table in the official DG442 manufacturer documentation. The verified product information confirms a 16-lead SOIC configuration, but it does not reproduce every terminal name in the listing summary. Assign the four control inputs, four common terminals, and eight switched terminals by matching the physical pin numbering shown in the datasheet diagram and package drawing.
What can replace the DG442DY+?
The DG442DY can serve as a candidate replacement when its production variant, electrical limits, and package documentation are verified for the intended design. Cross-reference information identifies the Vishay DG442DY as a 16-SOIC, four-circuit 1:1 SPST switch with an 85-ohm listing rating. A qualified substitution still requires confirmation of control logic, supply range, absolute maximum ratings, leakage, timing, and exact land pattern.
Is DG442DY+ the same as DG442DY?
DG442DY+ and DG442DY denote closely related orderable versions of the same Maxim Integrated DG442 family, but the suffix must be checked against the manufacturer ordering table before treating them as identical. Both names refer to the improved four-channel SPST analog-switch family, and product listings show the DY version in a 16-SOIC package. Confirm lead finish, shipping format, temperature grade, and ordering status against the manufacturer documentation.
When should I choose DG442DY+ over another quad SPST analog switch?
Choose the DG442DY+ when a design requires four independent SPST channels, a 16-lead SOIC footprint, and low power consumption in a compact routing circuit. It is especially relevant where channel matching and on-resistance flatness matter, because the manufacturer lists matching within 4 ohms maximum and flatness within 9 ohms maximum. Selection should also account for supply voltage, logic levels, leakage, switching time, and available sourcing.
Is DG442DY+ suitable for test and measurement equipment?
The DG442DY+ is suitable for test and measurement routing because it combines four independently controlled SPST channels with on-resistance matching within 4 ohms maximum. Those characteristics help reduce channel-dependent attenuation when routing similar signals. For precision measurements, verify leakage, charge injection, off impedance, bandwidth, and switching transient behavior against the application’s error budget.
Where to buy DG442DY+ online?
Use the Request a Quote form on this page to request DG442DY+ availability, lead time, and a quotation for the exact 16-lead SOIC configuration. The form allows the request to be tied to the specific manufacturer part number rather than a generic switch family. Confirm that the quoted item is DG442DY+ and not DG442DY, a different package, or a different shipping format.
What is the price of DG442DY+?
The current DG442DY+ price should be requested through the Request a Quote form on this page. Configuration, quantity, lead time, and market availability can change the commercial terms, so a quote tied to the exact MPN is more useful than a generic family price. Submit the required quantity, target package format, delivery location, and production timing for an actionable response.
What is the lead time for DG442DY+?
Request the current DG442DY+ lead time through the Request a Quote form on this page. The exact lead time depends on order quantity, stock position, manufacturing status, package configuration, and the requested delivery schedule. Include your forecast and any required traceability information so the quotation can reflect the intended production plan rather than a generic sample order.
Is DG442DY+ in stock?
Request current DG442DY+ inventory status through the Request a Quote form on this page. Stock should be confirmed for the exact suffix and 16-lead SOIC configuration because channel inventory can change quickly. Provide the required quantity and target schedule when requesting the quotation so the response can identify available supply and the appropriate delivery lead time.
What is the best Vishay equivalent for DG442DY+?
The Vishay DG442DY is the best-supported cross-brand candidate because product listings describe four 1:1 SPST circuits, 85-ohm on-resistance, and a 16-SOIC package matching the target family. Treat it as a candidate rather than an automatic substitution: verify control polarity, supply range, absolute maximum ratings, switching speed, leakage, pinout, and land pattern. The manufacturer documentation for the selected Vishay grade must be approved before production use.
DG442DY+ vs DG442DY - which is better for analog routing?
DG442DY+ and DG442DY are close members of the same four-channel SPST switch family, so the better choice depends on the exact ordering suffix and procurement requirements. The manufacturer identifies improved DG441/DG442 behavior with on-resistance matching within 4 ohms maximum and flatness within 9 ohms maximum. Compare the exact ordering table, temperature grade, package, qualification, and lifecycle position before selecting one.
Does the DG442DY+ require special PCB layout considerations?
The DG442DY+ requires standard SOIC layout practices, with particular attention to preserving signal integrity around the four switched paths. Place the IC close to the source and destination traces, maintain a continuous ground reference, and avoid routing sensitive analog nets adjacent to switching edges. Use the manufacturer land pattern and pin table, and verify whether any exposed-pad or thermal land is required for the exact package.
Is DG442DY+ compliant with RoHS and REACH?
The current RoHS and REACH status should be confirmed from the manufacturer material declaration for the exact DG442DY+ ordering configuration. Component listings do not by themselves establish every environmental declaration for a lead finish and shipping format. Request the current compliance documents and compare their part-number coverage before treating the device as compliant for production procurement.

داتای سەرچاوەی ئەندازیاری بۆ DG442DY+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the DG442DY+ when the design requires a compact four-channel SPST switch and benefits from Maxim’s stated maximum on-resistance matching of 4 ohms and flatness of 9 ohms. It is a strong fit for test, measurement, instrumentation, and controlled analog-routing systems where channel consistency affects the error budget. The Vishay DG442DY, DG442DY-E3, and DG442DY-T1-E3 are same-package candidates based on four 1:1 SPST circuits and an 85-ohm listed rating, but they require independent review of control polarity, supply limits, leakage, switching time, absolute maximum ratings, temperature grade, and qualification. Use the target part when its documented matching guarantees and Maxim ordering history are the deciding factors. Use a Vishay candidate when its complete electrical data and manufacturing configuration are already approved for the design. In every case, verify the exact pinout, land pattern, and lifecycle status rather than relying only on the package name.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە DG442DY DG442DY-E3 DG442DY-T1-E3
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Maxim Integrated Vishay Intertechnology Vishay Intertechnology Vishay Intertechnology
Number of Circuits 4 4 4 4
Switch Configuration 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST
Typical On-Resistance 85 ohm 85 ohm 85 ohm 85 ohm

جیاکەرەوە سەرەکییەکان

  • Documented channel-to-channel resistance matching (بەراورد بەDG442DY)
  • Same 16-SOIC footprint and four-channel SPST organization (بەراورد بەDG442DY-E3)
  • Compact four-channel routing in one package (بەراورد بەDG442DY-T1-E3)

تێبینییەکانی دیزاین

Place the DG442DY+ adjacent to the signal sources and destinations that share each SPST path. Minimize copper length between switched terminals and their connected circuits, keep the common-terminal routing compact, and provide a stable ground reference. This reduces parasitic resistance and capacitance that can degrade attenuation and switching performance. Use the manufacturer’s 16-lead SOIC land pattern and confirm pin numbering against the physical package marking before fabrication.

Budget for off-state leakage, charge injection, and control-edge transients when using the switch with high-impedance sources. The listed 85-ohm on-resistance is appropriate for many low-frequency routing tasks, but it can create a meaningful divider with a high source impedance. Allow sufficient settling time after changing a control input and keep sensitive analog traces away from control and switched-node routing.

Check the exact supply and logic levels against the operating table for the selected ordering configuration. The device is designed for low power consumption, with the family documentation listing 0.2 mW, but total system demand also depends on control states and the load presented through each closed switch. Confirm absolute maximum signal and supply voltages, especially when switching bipolar signals or using dual supplies.

Do not substitute the device solely because a listing shows the same 16-SOIC package. Confirm pin assignment, control polarity, supply range, on-resistance limits, leakage, switching timing, and the manufacturer land pattern. For production qualification, also review the ordering suffix, temperature range, lifecycle status, material declarations, and any change-control notices associated with the exact production variant.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Material-declaration documents should be reviewed for the exact DG442DY+ production and shipping configuration before procurement. No aerospace qualification is established for the target part.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

dg442dy datasheet DG442DY+ datasheet DG442DY+ datasheet pdf DG442DY+ pinout DG442DY+ equivalent DG442DY+ replacement DG442DY+ drop-in replacement DG442DY+ vs DG442DY DG442DY+ price Maxim Integrated DG442DY+ DG442DY+ 16-SOIC footprint DG442DY+ analog switch application

پێکهاتە و زاراوە پەیوەندیدارەکان

Maxim Integrated Analog Devices DG442DY+ DG442DY DG442DY-E3 DG442DY-T1-E3 quad SPST analog switch CMOS analog switch analog switch multiplexer interface IC semiconductor SPST 1:1 switch configuration on-resistance on-resistance matching on-resistance flatness low leakage power consumption signal routing test and measurement data acquisition 16-SOIC SOIC family surface mount
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ