DG442DY+ Quad SPST Analog Switch | Maxim Integrated
MPN: DG442DY+ ✓ NakahandaDG442DY+ Ulas
A CMOS analog switch is a semiconductor-based selection device that connects or isolates signal paths under digital control. Unlike a mechanical relay, it operates without moving contacts, allowing faster switching and compact integration. The DG442DY+ belongs to the analog-switch hierarchy, where each SPST channel provides one conductive path and a separate control input. Its four-channel structure consolidates multiple routing functions into one package while keeping the PCB footprint straightforward.
The principal benefits are low on-resistance, low leakage, low power consumption, and improved matching and flatness among the four channels. Maxim describes the redesigned DG441/DG442 family as providing on-resistance matching within 4 ohms maximum between switches and on-resistance flatness within 9 ohms maximum over the signal range. The low-resistance behavior helps minimize signal attenuation when the switch is closed, while matching reduces channel-to-channel gain and timing inconsistencies in precision circuits.
The DG442DY+ uses CMOS construction to limit power consumption and provide high input impedance. Each channel can connect its corresponding terminal to its common terminal when asserted. Because the device has four independent control inputs, it can route different signals simultaneously. Designers should still account for switch logic polarity, signal-level limits, off-state leakage, charge injection, and switching transients when evaluating precision or high-impedance applications.
Typical uses include automated test equipment, data-acquisition systems, sample-and-hold circuits, signal multiplexing, instrumentation front ends, and communication equipment. The same four-channel structure can also be used to connect external sensors, select measurement paths, isolate signal sources, or implement controlled signal-routing networks where the system requires more than one independent analog connection.
For PCB implementation, place the device close to the routed signal paths to minimize trace resistance and capacitance. Keep sensitive analog traces away from high-energy switching nodes, provide a stable ground reference, and use the manufacturer pin-description table when assigning controls and common terminals. Decoupling and exposed-pad requirements are package-specific; verify the exact lead configuration and land pattern before releasing artwork.
This product reference combines the DG442DY+ electrical characteristics, package information, sourcing details, strict same-footprint alternatives, comparison data, and practical implementation guidance. It helps engineers evaluate the switch for signal-integrity, routing, and design-in decisions without relying on a simple distributor listing alone.
Mga alternatibo na pwedeng ilagay na DG442DY+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok DG442DY+ (parehas na form factor at footprint) — pagkakaiba sa Mounting Type, On-Resistance Flatness Over Signal Range, On-Resistance Matching Between Switches, Package, Switch Configuration.
DG442DY
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DG442DY-E3
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DG442DY-T1-E3
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DG442DY+ Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Quad SPST CMOS analog switch |
| Number of Circuits | 4 circuits |
| Switch Configuration | 1:1 SPST |
| Typical On-Resistance | 85 ohm |
| On-Resistance Matching Between Switches | 4 ohm maximum |
| On-Resistance Flatness Over Signal Range | 9 ohm maximum |
| Low-Leakage Specification | 80 pA |
| Power Consumption | 0.2 mW |
| Packhaging | 16-lead SOIC, 3.9 mm x 9.9 mm x 1.55 mm |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng DG442DY+ 16-lead soic, 3.9 mm x 9.9 mm x 1.55 mm
Pin configuration para sa DG442DY+ (16-lead soic, 3.9 mm x 9.9 mm x 1.55 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa DG442DY+.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
DG442DY+ ay nararapat para sa 6 aplikasyons: Automated Test Equipment Signal Routing, Data Acquisition Front End, Sensor Signal Multiplexing, Precision Signal Isolation, Sample-and-Hold Signal Selection, Communication Signal Routing.
Automated Test Equipment Signal Routing
The DG442DY+ suits automated test equipment that must route several measurement or stimulus paths through a controlled switching matrix. Four independent SPST channels provide compact multiplexing without mechanical relays, while the manufacturer’s maximum matching specification of 4 ohms between switches helps limit channel-dependent attenuation. Each control signal can select one switched terminal for connection to its common terminal. Designers should still budget for off-state leakage, charge injection, and switching transients because these errors can affect high-impedance or precision measurements.
Inirekomenda
Data Acquisition Front End
The DG442DY+ can select sensor or conditioned signal paths before an analog-to-digital converter in a data-acquisition front end. Its four-channel organization allows several inputs to share downstream conversion hardware, and the listed 85-ohm on-resistance helps minimize attenuation compared with a higher-resistance switch. Keep the device close to the ADC input to limit trace capacitance and noise pickup. The complete error budget should include leakage, charge injection, switching speed, and any required settling time after each control change.
Inirekomenda
Sensor Signal Multiplexing
The DG442DY+ is appropriate for multiplexing low-bandwidth sensor signals where four independently controlled routes are needed in a compact footprint. The SPST configuration can select one sensor at a time for a shared amplifier or measurement channel, helping reduce the number of external signal paths. Its CMOS implementation and listed 0.2-mW power-consumption characteristic suit low-power acquisition systems. Validate the signal amplitude, common-mode range, leakage, and source impedance because high-impedance sensors can expose small leakage and injection effects.
Inirekomenda
Precision Signal Isolation
The DG442DY+ can isolate a sensitive amplifier or measurement input from external test circuitry by opening an SPST path when it is not selected. This prevents unwanted signals from reaching downstream circuitry and provides four independently controlled isolation points. The family’s maximum on-resistance matching of 4 ohms helps maintain consistency when similar channels are compared. For very high source impedances or wide dynamic-range measurements, include off leakage and injected charge in the error analysis rather than relying only on the 85-ohm on-resistance figure.
Inirekomenda
Sample-and-Hold Signal Selection
The DG442DY+ can choose among four held or sampled signals before a sample-and-hold stage. Each SPST channel provides a direct route between a switched terminal and its common terminal, allowing the hold capacitor to charge from one selected source at a time. The device’s compact 16-lead SOIC package leaves board area for the storage and buffer stages. Select external capacitor and bandwidth values based on the required acquisition time, switch resistance, leakage, injected charge, and source impedance.
Inirekomenda
Communication Signal Routing
The DG442DY+ can route controlled communication signals when the design requires four isolated paths, compact logic, and low power consumption. Its independently controlled channels are useful for connecting or disconnecting line-driver outputs, receiver inputs, or test paths. The 85-ohm listed on-resistance may be acceptable for low-frequency routing but can become significant for high-speed signals because parasitic capacitance and bandwidth must be included. Verify signal swing, logic thresholds, off impedance, and switching transients before using the switch in an active communication path.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DG442DY+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DG442DY | DG442DY-E3 | DG442DY-T1-E3 |
|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Maxim Integrated | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology |
| Number of Circuits | 4 | 4 | 4 | 4 |
| Switch Configuration | 1:1 SPST | 1:1 SPST | 1:1 SPST | 1:1 SPST |
| Typical On-Resistance | 85 ohm | 85 ohm | 85 ohm | 85 ohm |
Pangunahing mga Pagkakaiba
- Documented channel-to-channel resistance matching (kumpara saDG442DY)
- Same 16-SOIC footprint and four-channel SPST organization (kumpara saDG442DY-E3)
- Compact four-channel routing in one package (kumpara saDG442DY-T1-E3)
Talaan ng Disenyo
Place the DG442DY+ adjacent to the signal sources and destinations that share each SPST path. Minimize copper length between switched terminals and their connected circuits, keep the common-terminal routing compact, and provide a stable ground reference. This reduces parasitic resistance and capacitance that can degrade attenuation and switching performance. Use the manufacturer’s 16-lead SOIC land pattern and confirm pin numbering against the physical package marking before fabrication.
Budget for off-state leakage, charge injection, and control-edge transients when using the switch with high-impedance sources. The listed 85-ohm on-resistance is appropriate for many low-frequency routing tasks, but it can create a meaningful divider with a high source impedance. Allow sufficient settling time after changing a control input and keep sensitive analog traces away from control and switched-node routing.
Check the exact supply and logic levels against the operating table for the selected ordering configuration. The device is designed for low power consumption, with the family documentation listing 0.2 mW, but total system demand also depends on control states and the load presented through each closed switch. Confirm absolute maximum signal and supply voltages, especially when switching bipolar signals or using dual supplies.
Do not substitute the device solely because a listing shows the same 16-SOIC package. Confirm pin assignment, control polarity, supply range, on-resistance limits, leakage, switching timing, and the manufacturer land pattern. For production qualification, also review the ordering suffix, temperature range, lifecycle status, material declarations, and any change-control notices associated with the exact production variant.
Impormasyon ng Pagsunod sa Kautusan
Material-declaration documents should be reviewed for the exact DG442DY+ production and shipping configuration before procurement. No aerospace qualification is established for the target part.