DP83848TSQ/NOPB - 10/100 Ethernet PHY | Texas Instruments
MPN: DP83848TSQ/NOPB ✓ چالاکDP83848TSQ/NOPB گشتی
An Ethernet PHY is the physical-layer interface between a network controller or embedded processor and twisted-pair Ethernet cabling. Within the Ethernet hierarchy, a PHY connects the MAC-layer data interface to the physical medium, while a media-access controller handles frame construction, addressing, and higher-level traffic control. The DP83848T supports MII and RMII-style integration needs and is designed for compact embedded systems where board area, interoperability, and cable reach are important considerations.
Key features include 10/100 Mbps data-rate operation, Auto-MDIX for automatic selection between straight-through and crossover cable connections, and a 25 MHz clock output. The manufacturer states that the device provides performance beyond the IEEE specifications, strong interoperability, and operation beyond 137 meters of Cat-V cable. The 6 mm by 6 mm WQFN package also includes an exposed thermal pad for heat transfer to the PCB during operation.
The DP83848T family is intended for industrial controls, building and factory automation, transportation equipment, test instrumentation, and wireless base stations. Its single-port architecture makes it appropriate for embedded Ethernet links that need a dedicated PHY close to the host controller. Designers should preserve the manufacturer-recommended power, decoupling, clock, magnetic-interface, and differential-pair layout guidance to maintain signal integrity and reliable network performance.
A principal design trade-off is that the DP83848TSQ/NOPB is a 10/100 device rather than a gigabit PHY. It remains suitable for legacy and industrial 100BASE-TX links, but it cannot replace a 1000BASE-T implementation. The automotive suffix indicates suitability for automotive-grade programs, while the exact orderable qualification, temperature range, and electrical limits should be confirmed from the manufacturer ordering information before release.
For layout, place the PHY close to the Ethernet connector and route the differential transmit and receive pairs as controlled-impedance, continuously referenced traces. Keep switching regulators, clocks, and high-current paths away from the magnetic-interface section, and provide the specified input and output capacitors close to their associated supply pins. Use the exposed-pad area as a thermal and return-path structure according to the manufacturer land-pattern guidance.
This page consolidates the manufacturer product information, exact-MPN sourcing records, same-family drop-in candidates, comparison criteria, and implementation notes needed to evaluate the DP83848TSQ/NOPB before schematic capture. Review the manufacturer datasheet pin table and package drawing when assigning every signal, especially the exposed-pad connection and MII/RMII interface requirements.
جێگرەوەکانی جێگۆڕکێ بۆ DP83848TSQ/NOPB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ DP83848TSQ/NOPB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Auto-MDIX, Supply Voltage, RoHS Status, Cable Reach.
DP83848KSQ/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83848JSQ/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83848MSQ/NOPB
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83848HSQ/NOPB
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83848QSQE/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83848TSQ/NOPB تایبەتمەندییەکان
| Product Type | Single-port Ethernet physical-layer transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps |
| Number of Ports | 1 port |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| پاکێج | 40-pin WQFN with exposed pad |
| Package Dimensions | 6 mm x 6 mm |
| جۆری دامەزراندن | Surface mount |
| Auto-MDIX | Supported |
| Clock Output | 25 MHz |
| Cable Support | Beyond 137 meters of Cat-V cable |
| Automotive Qualification | AEC-Q100 |
| Host Interface | MII |
| Data Sheet Page Count | 84 pages |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
ڕێنمایی ڕێکخستنی پینی DP83848TSQ/NOPB 6 mm x 6 mm
ڕێکخستنی پین بۆ DP83848TSQ/NOPB (پاکێجی 6 mm x 6 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ DP83848TSQ/NOPB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
DP83848TSQ/NOPB گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Ethernet, Factory Automation Terminal, Building Automation Controller, Transportation Ethernet Gateway, Test and Measurement Instrument, Wireless Base Station Networking.
Industrial Control Ethernet
The DP83848TSQ/NOPB fits industrial controllers that require a dedicated 10/100 Ethernet physical layer without using a gigabit-capable PHY. Its single-port design, 3.3 V supply, MII interface, and Auto-MDIX capability simplify connection to an embedded Ethernet controller. The compact 6 mm by 6 mm WQFN also preserves board area in space-constrained control equipment. Texas Instruments identifies industrial control as a target application and states that the DP83848T family operates beyond 137 meters of Cat-V cable. Place the PHY near the RJ45 magnetic interface and isolate its differential pairs from noisy power-conversion circuitry.
پێشنیارکراو
Factory Automation Terminal
DP83848TSQ/NOPB is appropriate for factory automation terminals, PLC peripherals, and data-acquisition equipment connected to 100BASE-TX infrastructure. The device handles 10 Mbps and 100 Mbps links, includes Auto-MDIX to simplify field cabling, and provides the MII interface needed by compatible embedded processors. Its 25 MHz clock output may reduce the clock-source burden in suitable designs, while its stated cable performance supports deployed automation networks. Keep the PHY close to the network transformer, maintain continuous ground references beneath the differential pairs, and isolate switching supplies to protect the receive path from noise.
پێشنیارکراو
Building Automation Controller
The DP83848TSQ/NOPB supports building-automation controllers that connect sensors, gateways, and room-control units over 10/100 Ethernet. Auto-MDIX reduces installation errors by accommodating straight-through and crossover wiring, while the compact 40-WQFN footprint suits densely populated control panels. The single Ethernet port is appropriate where each controller requires one network segment, and the MII interface supports a conventional embedded-host architecture. For reliable links, follow the manufacturer's magnetic-component and differential-routing recommendations, provide local decoupling at the PHY supplies, and test the completed cable assembly under the required temperature and electromagnetic conditions.
پێشنیارکراو
Transportation Ethernet Gateway
DP83848TSQ/NOPB is suited to 10/100 Ethernet links in transportation gateways and vehicle-network interface equipment where its AEC-Q100 identification is relevant. The device provides automatic media detection, a 3.3 V operating rail, and a compact WQFN package that can be placed near the network connector. Its role is limited to 100 Mbps operation, so it should be selected only when the vehicle network uses 10BASE-T or 100BASE-TX rather than gigabit Ethernet. Validate transient immunity, conducted emissions, temperature limits, and network isolation against the applicable vehicle requirements before production release.
پێشنیارکراو
Test and Measurement Instrument
The DP83848TSQ/NOPB can provide a 10/100 network link for test equipment, bench instruments, and industrial diagnostic consoles. Its single-port PHY architecture reduces complexity when one Ethernet connection is sufficient, while MII permits integration with a suitable host controller. The manufacturer's stated support beyond 137 meters of Cat-V cable can be useful in distributed test installations, although actual reach depends on cable quality, topology, and interference. Keep the receiver away from high-voltage and high-current sections of the instrument, use a shielded enclosure and chassis-ground strategy where required, and validate the full interface under the intended EMC environment.
پێشنیارکراو
Wireless Base Station Networking
DP83848TSQ/NOPB can support the management or backhaul Ethernet portion of a wireless base station or embedded networking appliance that operates at 10/100 Mbps. The MII interface gives the host processor access to a conventional PHY interface, and Auto-MDIX simplifies commissioning with varied cable arrangements. The WQFN package helps preserve board area in dense equipment, while the 25 MHz clock output can reduce component requirements in suitable clock trees. Because the device is limited to 100 Mbps, it is appropriate for control and management traffic rather than high-volume 1GbE backhaul. Thermal performance and link margin should be tested with the final enclosure and power system.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ DP83848TSQ/NOPB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | DP83848KSQ/NOPB | DP83848JSQ/NOPB | DP83848MSQ/NOPB | DP83848HSQ/NOPB | DP83848QSQE/NOPB |
|---|---|---|---|---|---|---|
| Package | 40-WQFN (6x6) | 40-WQFN (6x6) | 40-WQFN (6x6) | 40-WQFN (6x6) | 40-WQFN (6x6) | 40-WQFN (6x6) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Port Count | 1 port | 1 port | 1 port | 1 port | 1 port | 1 port |
جیاکەرەوە سەرەکییەکان
- Purpose-built 10/100 Ethernet PHY for compact embedded links (بەراورد بەDP83848KSQ/NOPB)
- Integrated 25 MHz clock output (بەراورد بەDP83848JSQ/NOPB)
- Automotive-oriented exact-MPN qualification (بەراورد بەDP83848QSQE/NOPB)
تێبینییەکانی دیزاین
Place the DP83848TSQ/NOPB near the RJ45 connector and Ethernet magnetic component. Route transmit and receive differential pairs as short, continuous, impedance-controlled traces with uninterrupted reference planes. Keep switching-regulator stages, high-current returns, oscillators, and unrelated digital clocks away from the PHY and magnetic-interface area to reduce differential noise and common-mode conversion.
Implement separate, well-decoupled supply paths for the analog and digital portions of the PHY according to the manufacturer pin table. Place the prescribed bypass capacitors close to their supply pins with short ground returns, and connect the exposed pad using the datasheet land pattern. Verify the completed assembly's supply ripple and ground bounce because these can degrade receive sensitivity and link margin.
Do not substitute the DP83848TSQ/NOPB for a gigabit PHY: it is limited to 10/100 Mbps. Likewise, do not assume that every DP83848 suffix is register- and pin-compatible. Check the selected alternative's data rate, MII timing, clock arrangement, exposed-pad requirement, and magnetic-interface recommendations. Changes in these details can require firmware, schematic, or PCB-layout changes even when the family name appears similar.
Estimated: use P = (VIN - VOUT) x IOUT to calculate the PHY's approximate dissipation, then apply the package thermal model from the manufacturer datasheet. At 3.3 V input, 3.3 V output, and 100 mA load, the calculated dissipation is 0 W because the voltage drop is zero; real losses still arise from regulator efficiency and internal circuitry. Ensure that the exposed-pad copper and surrounding ground plane provide the intended thermal path without disturbing sensitive return currents.
Confirm the ordering suffix, reel orientation, exposed-pad connection, magnetic-interface components, and clock source against the manufacturer documentation before fabrication. The WQFN lead pitch and exposed pad make fine-pitch assembly errors possible, while an incorrect termination or magnetics choice can cause link failures despite a correct schematic. Perform continuity, impedance, and Ethernet link-margin testing on the first article.
زانیاری پابەندبوون
The exact-MPN listing identifies the device as AEC-Q100 automotive qualified. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established from the exact manufacturer records.