DP83910AV/63SN - 5V CMOS Ethernet SNI | Texas Instruments
MPN: DP83910AV/63SN ⚠ کۆتا کڕینDP83910AV/63SN گشتی
An SNI, or serial network interface, is an interface integrated circuit that connects networking equipment to a serial or system-side data path. Within the hardware hierarchy, the DP83910AV/63SN belongs to Ethernet interface ICs, network interface controllers, interface semiconductors, and integrated circuits. Its function is to support Ethernet-oriented network-interface implementations where a dedicated controller requires a compatible serial network interface device.
The principal documented characteristics are the 4.75 V to 5.25 V operating supply, CMOS construction, 28-pin PLCC package, and 11.51 mm by 11.51 mm package dimensions. The DP83910AV/63SN carries RoHS3 status and is identified as a last-time-buy component. Engineers should therefore treat availability, lifecycle continuity, and legacy-board support as important selection factors rather than assuming a current active-production lifecycle.
The DP83910A is designed as a CMOS SNI for Ethernet applications. Because this legacy device predates many integrated Ethernet controllers, it is most relevant to equipment based on established interfaces, industrial communication systems, test equipment, and embedded networking designs that retain the original system architecture. A migration to a newer Ethernet interface IC may require controller, protocol, pinout, software, and timing changes rather than a simple board substitution.
Typical uses include legacy Ethernet network-interface adapters, industrial control equipment, embedded communication controllers, test and measurement systems, and data-acquisition equipment. In these applications, the SNI can serve as the network-facing interface component while a host processor or communications controller manages packet processing and higher-level protocol functions. The 5 V supply range also supports equipment architectures that already provide a regulated 5 V rail.
When designing around the DP83910AV/63SN, begin with the manufacturer datasheet pin-description table, supply recommendations, and timing diagrams. PLCC lead pitch, exposed underside geometry, solder-profile requirements, and thermal performance should be checked against the PCB footprint before layout approval. Because the device is in last-time-buy status, consider long-term procurement and a documented second-source strategy for maintenance programs.
This page organizes the known electrical, package, lifecycle, commercial, and replacement information for engineering review. It also highlights verified direct-substitute information and explains where an existing Ethernet design may require architectural changes instead of a pin-compatible replacement.
جێگرەوەکانی جێگۆڕکێ بۆ DP83910AV/63SN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ DP83910AV/63SN (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, RoHS Status, Package Type, Application, Lead-Free Status.
DP83910AV/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83910AV/63SN تایبەتمەندییەکان
| Product Type | CMOS serial network interface (SNI) integrated circuit |
| Ethernet Interface Function | Serial network interface for Ethernet applications |
| ڤۆڵتاژی دابینکردنی کارکردن | 4.75 V to 5.25 V |
| Supply Range Center | 5 V nominal |
| Process Technology | CMOS |
| Package Type | 28-pin PLCC |
| Package Code | QCCJ |
| Package Dimensions | 11.51 mm x 11.51 mm |
| Package Shape | Square |
| Surface-Mount Construction | Surface mount |
| Number of Terminals | 28 terminals |
| Temperature Grade | Commercial |
| دۆخی چرخەی ژیان | Last time buy |
| Compliance Classification | RoHS3 |
| Shipping Format | Tube |
ڕێنمایی ڕێکخستنی پینی DP83910AV/63SN square
ڕێکخستنی پین بۆ DP83910AV/63SN (پاکێجی square). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ DP83910AV/63SN.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
DP83910AV/63SN گونجاوە بۆ 6 بەکارھێنانs: Legacy Ethernet Network Adapters, Industrial Control Communications, Test and Measurement Systems, Embedded Data Acquisition, Embedded Communication Controllers, Network Equipment Maintenance.
Legacy Ethernet Network Adapters
The DP83910AV/63SN fits legacy Ethernet adapter architectures built around the DP83910A serial network interface. Its 4.75 V to 5.25 V operating range is compatible with a regulated 5 V rail, and the 28-pin PLCC package preserves the physical format documented for the original device. In an established product, this allows maintenance teams to retain the approved controller, driver, and board architecture while addressing long-term continuity. Because the component is classified as last time buy, engineers should validate demand early and compare the direct DP83910AV/NOPB substitute before committing a new production build.
پێشنیارکراو
Industrial Control Communications
The DP83910AV/63SN can support legacy industrial control equipment that uses a dedicated Ethernet SNI alongside a communications controller. The 5 V supply range fits equipment with a regulated 5 V rail, while the commercial-grade designation permits use in commercial-temperature industrial environments when their specified ambient range is compatible. Engineers should preserve the original timing, isolation, magnetics, and connector implementation rather than assuming a newer controller can be substituted directly. Lifecycle planning is especially important because the interface is a last-time-buy product; inventory, obsolescence notices, and controlled migration plans should be established for deployed machines.
پێشنیارکراو
Test and Measurement Systems
The DP83910AV/63SN is appropriate for maintaining test and measurement instruments whose Ethernet control path was designed around the DP83910A interface. Such equipment may connect a communications controller to laboratory networks for remote control, result transfer, or configuration. The documented 4.75 V to 5.25 V supply simplifies integration with conventional 5 V logic rails, and the 28-pin PLCC footprint allows reuse of an existing qualified layout. For new instruments, weigh the legacy interface against currently supported Ethernet controllers because firmware, packet handling, timing, and host-driver changes may make a redesign more economical than a last-time-buy procurement strategy.
پێشنیارکراو
Embedded Data Acquisition
The DP83910AV/63SN can maintain Ethernet connectivity in an embedded data-acquisition platform designed around the DP83910A interface architecture. The component is best suited when the host processor already includes a compatible communications controller and the product must preserve its qualified 28-pin PLCC board. The 5 V supply range supports common industrial logic rails, but designers must still verify absolute maximum ratings and signal levels from the manufacturer datasheet. Because this is a last-time-buy Ethernet interface, new data-acquisition products should include a lifecycle review that compares redesign risk with long-term procurement exposure.
پێشنیارکراو
Embedded Communication Controllers
The DP83910AV/63SN is suitable for embedded communication-controller designs that rely on the DP83910A as the Ethernet-facing SNI. It allows an established processor, FPGA, or communications controller arrangement to remain intact when maintaining a proven product. The 28-pin PLCC package and 4.75 V to 5.25 V operating range are the principal mechanical and electrical constraints that must match the existing design. Pin functions and timing must be checked directly against the manufacturer datasheet rather than inferred from the generic interface description. For long-lived programs, secure lifecycle visibility and assess DP83910AV/NOPB as the closest documented direct substitute.
پێشنیارکراو
Network Equipment Maintenance
The DP83910AV/63SN is relevant to repair and lifecycle-extension programs for legacy network equipment that contains the original DP83910A interface. Using the same 28-pin PLCC device can simplify board-level replacement when the existing footprint and electrical environment remain qualified. Procurement should reference the exact /SN orderable configuration and its documented tube format. Since the part is classified as last time buy, maintenance teams should forecast consumption rather than relying on emergency purchasing. A controlled migration plan is recommended for equipment that must remain in service for many years, especially where a newer Ethernet interface would require software and hardware qualification.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ DP83910AV/63SN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | DP83910AV/NOPB |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 28-PLCC | 28-PLCC, same package geometry |
| Function | Ethernet serial network interface | Ethernet serial network interface |
| Operating Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Process Technology | CMOS | CMOS |
جیاکەرەوە سەرەکییەکان
- Exact documented electrical and mechanical substitute (بەراورد بەDP83910AV/NOPB)
- Orderable tube configuration (بەراورد بەDP83910AV/63)
- RoHS3 documentation for the /SN configuration (بەراورد بەDP83910AV/NOPB)
تێبینییەکانی دیزاین
Use the manufacturer package drawing and pin-description table to create the 28-pin PLCC land pattern. Confirm lead pitch, body outline, seating plane, underside geometry, and solderable-versus-nonsolderable pad construction before releasing artwork. The documented body dimensions are 11.51 mm by 11.51 mm, but those dimensions alone do not define the complete footprint. Do not infer terminal numbering from the square package shape.
Design the board around the documented 4.75 V to 5.25 V operating supply and verify all electrical limits against the manufacturer datasheet. Place bypass capacitors close to the device supply terminals using the layout recommended in the datasheet, and keep sensitive Ethernet and serial-interface routing away from switching nodes. Because this is a last-time-buy component, document supply assumptions and regulator tolerances before layout approval.
Do not treat every 28-pin Ethernet interface as a drop-in replacement. Pin names, timing, protocol behavior, clock requirements, and termination expectations can differ even when the package has the same pin count. DP83910AV/NOPB is the documented direct substitute for this family, but any newer device should enter the design only after a manufacturer-supported cross-reference or a complete engineering review confirms compatibility.
Evaluate the PLCC's thermal performance with the actual PCB land pattern, copper area, surrounding components, airflow, and ambient temperature. Do not estimate reliability from package size alone. Use the manufacturer thermal characterization for the final board configuration, and include the component's operating environment in the product qualification because the published temperature grade is commercial.
زانیاری پابەندبوون
The product listing identifies DP83910AV/63SN as RoHS3. No separate REACH, lead-free, halogen-free, or conflict-minerals statements were identified.