DP83910AV/NOPB - CMOS Ethernet SNI | Texas Instruments
MPN: DP83910AV/NOPB ✗ کۆتایی ژیانDP83910AV/NOPB گشتی
A serial network interface is an interface IC that connects a digital system to a physical network encoding. Manchester encoding represents each bit through a transition in the signal, allowing the receiver to recover both data and timing. Within the broader semiconductor hierarchy, the DP83910AV/NOPB is an Ethernet interface IC, a serial interface device, and a network interface component designed for 5 V digital equipment.
Key features include CMOS construction, serial Manchester encoding and decoding, a 4.75 V minimum operating supply, a 5.25 V maximum operating supply, and compatibility with the pin arrangement of the original bipolar DP8391 interface. Its commercial temperature classification, J-lead terminal form, 28-terminal square package, and tube packaging are identified in manufacturer and distributor technical listings.
The DP83910A implementation replaces the bipolar technology used by the earlier DP8391 while retaining direct-pin equivalence. This distinction is important in legacy and industrial Ethernet designs because a board can retain its established land pattern and signal architecture while moving from a bipolar interface to CMOS. The 28-PLCC construction also supports through-hole assembly and removal or replacement with conventional PLCC handling equipment.
Typical uses include Ethernet network interface cards, embedded Ethernet equipment, industrial controllers, data acquisition systems, and legacy network adapters that require Manchester-coded serial signaling. The appropriate operating environment must stay within the stated 4.75 V to 5.25 V supply range. Board-level design should also preserve the original DP8391-compatible clock, transmit, receive, and control arrangements when reusing an existing footprint.
For a new design, begin with the manufacturer pin-description and application information rather than treating the direct-pin statement as permission to change system timing. Decoupling, impedance-controlled network connections, grounding, and signal routing should follow the circuit shown in the manufacturer datasheet. In a legacy replacement, verify the installed DP8391 or DP83910A markings and compare supply voltage, temperature grade, and package orientation before production use.
This page combines the verified package, supply, interface, technology, and compliance details with replacement guidance and practical implementation considerations. It also identifies the limitations of the available drop-in choices: the closest documented replacement is the same manufacturer's DP83910AV/63, while no additional pin-compatible component is documented by the cited TI support discussion.
جێگرەوەکانی جێگۆڕکێ بۆ DP83910AV/NOPB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ DP83910AV/NOPB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, RoHS Status, Process Technology, Manufacturer, Mounting Type.
DP83910AV/63
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83910AV
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83910AV/NOPB تایبەتمەندییەکان
| Device Type | CMOS serial network interface (SNI) |
| Ethernet Function | Manchester data encoding and decoding |
| Supply Voltage Range | 4.75 V to 5.25 V |
| جۆری ڕووکار | Serial |
| Application | Ethernet network |
| Process Technology | CMOS |
| Legacy Compatibility | Direct-pin equivalent of the bipolar DP8391 SNI |
| Package Type | 28-PLCC (J-Lead) |
| Package Dimensions | 11.51 mm x 11.51 mm |
| Terminal Count | 28 terminals |
| Terminal Form | J-Lead |
| Package Shape | Square |
| Package Code | QCCJ |
| Temperature Grade | Commercial |
| Packaging | Tube |
| Lead-Free Status | Lead Free |
| دۆخی RoHS | RoHS compliant |
ڕێنمایی ڕێکخستنی پینی DP83910AV/NOPB qccj
ڕێکخستنی پین بۆ DP83910AV/NOPB (پاکێجی qccj). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ DP83910AV/NOPB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
DP83910AV/NOPB گونجاوە بۆ 6 بەکارھێنانs: Legacy Ethernet Network Interface Cards, Industrial Ethernet Controller Equipment, Data Acquisition Systems, Embedded Network Adapters, Legacy Network Adapters, 5 V Network Interface Test Systems.
Legacy Ethernet Network Interface Cards
The DP83910AV/NOPB fits legacy Ethernet interface-card designs that require Manchester encoding and decoding through a serial network interface. Its CMOS implementation is a direct-pin equivalent of the bipolar DP8391, allowing an existing 28-PLCC board architecture to be retained during maintenance. The documented 4.75 V to 5.25 V supply range supports conventional 5 V systems, although the board must maintain that range under every operating condition. For a drop-in repair, verify the installed package orientation and pin assignments against the manufacturer datasheet before fitting the replacement.
پێشنیارکراو
Industrial Ethernet Controller Equipment
The DP83910AV/NOPB is appropriate for industrial Ethernet controller equipment built around the established DP8391 Manchester serial interface. Its direct-pin relationship with the bipolar original reduces mechanical and logic changes when maintaining an existing 28-PLCC design. The interface operates from 4.75 V to 5.25 V and provides dedicated CMOS encoding and decoding functions for the serial network path. Engineers should preserve the manufacturer-recommended clocking, grounding, and network-side implementation to avoid introducing timing or signal-integrity problems into mature industrial equipment.
پێشنیارکراو
Data Acquisition Systems
A data acquisition system can use the DP83910AV/NOPB when its Ethernet subsystem relies on the legacy DP8391-compatible Manchester interface. The device supplies the network encoding and decoding functions while occupying a 28-PLCC footprint, making it useful in long-life measurement platforms that require a known replacement path. Operation must remain inside the 4.75 V to 5.25 V supply range, and the data-acquisition timing path must remain compatible with the original implementation. Preserve the reference clock and interface routing shown in the manufacturer application information.
پێشنیارکراو
Embedded Network Adapters
The DP83910AV/NOPB supports embedded network adapters designed around a 5 V Manchester-coded serial Ethernet interface. Its 28-PLCC package and DP8391-compatible pin arrangement are especially relevant when an embedded controller already uses that legacy topology. The device provides the network-facing encoding and decoding functions without introducing a modern transceiver architecture. For production continuation, review lifecycle requirements, regulatory documentation, and the availability of the documented DP83910AV/63 substitute before releasing the embedded assembly.
پێشنیارکراو
Legacy Network Adapters
The DP83910AV/NOPB is suited to repair and continuation of legacy network adapters that use the bipolar DP8391 interface arrangement. Its CMOS implementation retains direct-pin equivalence while providing Manchester data encoding and decoding in a 28-PLCC package. This makes it useful where a redesign would be more disruptive than replacing the established interface section. Verify pin orientation, supply tolerance, temperature requirements, and timing behavior against the manufacturer datasheet; package similarity alone should not replace functional validation.
پێشنیارکراو
5 V Network Interface Test Systems
The DP83910AV/NOPB can be incorporated into a 5 V network-interface test system that exercises a legacy Manchester-coded Ethernet path. Its defined 4.75 V to 5.25 V supply range provides a clear operating boundary, while the direct-pin DP8391 relationship supports comparison with earlier bipolar hardware. The 28-PLCC package also permits controlled socket-based prototyping or reuse of an existing test fixture. Signal and clock implementation should follow the manufacturer circuit, with particular attention to trace integrity, supply bypassing, and exposure to the external network medium.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ DP83910AV/NOPB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | DP83910AV/63 | DP83910AV |
|---|---|---|---|
| Package | 28-PLCC (J-Lead) | 28-PLCC (J-Lead) | 28-PLCC (J-Lead) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Interface Type | Serial | Serial | Serial |
| Application | Ethernet network | Ethernet network | Ethernet network |
| Technology | CMOS | CMOS | CMOS |
| Core Function | Manchester data encoding and decoding | Manchester data encoding and decoding | Manchester data encoding and decoding |
| Legacy Compatibility | Direct-pin equivalent of bipolar DP8391 | Same DP83910 base product | Same DP83910 base product |
جیاکەرەوە سەرەکییەکان
- Direct replacement pathway with identical documented voltage and package specifications (بەراورد بەDP83910AV/63)
- Retains the established DP8391 board architecture (بەراورد بەDP83910AV)
- Commercial-grade 5 V interface for targeted legacy maintenance (بەراورد بەDP83910AV/63)
تێبینییەکانی دیزاین
Treat the direct-pin relationship as a package and architecture statement, not permission to omit functional validation. Compare the installed DP8391 or DP83910A device, confirm the 4.75 V to 5.25 V operating range, verify commercial temperature requirements, and check pin 1 orientation against the 28-PLCC footprint before installation. Also review product-status and regulatory requirements for the selected ordering suffix.
Preserve the clock, transmit, receive, control, and supply routing used by the original DP8391-based design when performing a drop-in maintenance substitution. Keep the Manchester-coded network path away from switching nodes and sensitive analog circuitry, and maintain a continuous ground reference beneath the 28-PLCC device. Follow the manufacturer application circuit for component placement and decoupling rather than deriving values solely from the package dimensions.
Provide a stable 5 V source that remains between 4.75 V and 5.25 V during startup and maximum load. Place the manufacturer-recommended bypass capacitors close to the supply pins and use a low-impedance ground return. Because the 28-PLCC device lacks a listed exposed thermal pad, allow space around the package and avoid enclosing it in an enclosure that prevents normal convection cooling.
زانیاری پابەندبوون
The technical listing identifies the device as lead free and RoHS compliant. It is a commercial-grade Ethernet interface rather than an automotive-qualified component. REACH, halogen-free, and conflict-minerals status are not stated.