EFM32TG108F8-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG108F8-QFN24T ✓ چالاکEFM32TG108F8-QFN24T گشتی
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The ARM Cortex-M3 core places the EFM32TG108F8-QFN24T in the 32-bit embedded-controller hierarchy, while the Tiny Gecko platform adds energy-saving operating modes and rapid wake-up behavior. These characteristics make the device relevant to battery-operated products and other embedded systems where processing capability must be balanced against energy use.
The principal resource limits are 8 KB of Flash and 2 KB of RAM. Flash stores executable code and nonvolatile configuration data, while RAM supports working variables, stack operations, and peripheral data. With 17 digital I/O pins, the device can connect external sensors, controls, indicators, and communication peripherals. Two dedicated 16-bit timers can provide periodic interrupts, elapsed-time measurement, pulse counting, or basic motor and timing functions.
The 32 MHz Cortex-M3 processor provides substantially greater arithmetic capacity than an 8-bit controller while retaining a compact embedded architecture. Silicon Labs designed the Tiny Gecko family around low-power techniques, short wake-up times, and energy-saving modes. Those features make the MCU useful where the equipment spends substantial time idle but must respond quickly when a user action, sensor event, or scheduled task occurs.
Typical uses include battery-powered sensor nodes, compact industrial controls, wearable accessories, smart-home endpoints, and low-power instrumentation. The 24-QFN footprint supports dense PCB layouts, but its exposed thermal and electrical requirements should be evaluated during layout. Firmware size must also remain within the 8 KB Flash constraint, which can be more restrictive than the nominal clock speed.
A principal design consideration is matching the firmware footprint to the available memory. Two timers and 17 I/O pins provide useful connectivity, but the small RAM limit requires careful buffer sizing and stack budgeting. Decoupling, ground-return planning, and exposed-pad thermal management are equally important in compact single-board designs.
This product record combines manufacturer specifications, family-level alternatives, package information, and practical design guidance to support faster MCU selection. It emphasizes the 32 MHz operating speed, 8 KB Flash, 2 KB RAM, 1.85 V to 3.8 V supply range, and 24-QFN footprint as the decisive engineering characteristics for embedded-system planning.
جێگرەوەکانی جێگۆڕکێ بۆ EFM32TG108F8-QFN24T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EFM32TG108F8-QFN24T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, Digital I/O Pins, RAM, Series.
EFM32TG108F16-QFN24T
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG108F32-QFN24T
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG110F8-QFN24T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG110F16-QFN24T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG108F4-QFN24T
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG108F8-QFN24T زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Processor Core | ARM Cortex-M3 |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 2 KB |
| Digital I/O Pins | 17 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.85 V to 3.8 V |
| پاکێج | 24-QFN, 5 mm x 5 mm |
| جۆری دامەزراندن | Surface mount |
| Bit Width | 32-bit |
| Program Memory Type | Flash |
| AES Hardware Accelerator | Not included |
ڕێنمایی ڕێکخستنی پینی EFM32TG108F8-QFN24T 24-qfn, 5 mm x 5 mm
ڕێکخستنی پین بۆ EFM32TG108F8-QFN24T (پاکێجی 24-qfn, 5 mm x 5 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EFM32TG108F8-QFN24T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EFM32TG108F8-QFN24T گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Node, Smart Home Control Endpoint, Industrial Control Module, Wearable Accessory Controller, Low-Power Instrumentation, Connected IoT Sensor Interface.
Battery-Powered Sensor Node
The EFM32TG108F8-QFN24T fits battery-powered sensor nodes because its Tiny Gecko platform combines a 32 MHz ARM Cortex-M3 core with energy-saving modes and short wake-up behavior. A 1.85 V to 3.8 V operating range supports low-voltage supply designs, while two 16-bit timers can schedule periodic measurements or wake the sensor interface. The 8 KB Flash limit requires concise firmware, but the 2 KB RAM is sufficient for compact buffering and careful stack management.
پێشنیارکراو
Smart Home Control Endpoint
As a smart-home endpoint, the EFM32TG108F8-QFN24T can monitor switches or sensors and actuate a local indicator or relay driver through its 17 digital I/O pins. Its two 16-bit timers support debounce intervals, periodic polling, and pulse counting without excessive software overhead. The 24-QFN footprint is useful in compact products, although the 8 KB Flash capacity is best suited to tightly scoped control firmware rather than large protocol stacks.
پێشنیارکراو
Industrial Control Module
The EFM32TG108F8-QFN24T is appropriate for compact industrial control modules that require deterministic periodic tasks and modest I/O rather than high-speed processing. Its two 16-bit timers can generate fixed-period service interrupts, while the 17 digital I/O pins support limit switches, status LEDs, and digital sensor inputs. The 1.85 V to 3.8 V supply range and 5 mm by 5 mm QFN package support space-constrained control boards, subject to thermal and EMC validation.
پێشنیارکراو
Wearable Accessory Controller
The EFM32TG108F8-QFN24T can serve as the central controller in a wearable accessory where fast response and low standby consumption are important. The Tiny Gecko platform supports rapid wake-up from energy-saving modes, allowing the MCU to respond to user input or motion events without remaining fully active. Seventeen digital I/O pins can connect compact sensors and indicators, while the two timers support debounce and activity timing. Firmware must remain within the 8 KB Flash limit.
پێشنیارکراو
Low-Power Instrumentation
For low-power instrumentation, the EFM32TG108F8-QFN24T can combine sensor conditioning, local control, and status reporting in one compact package. Its 32 MHz Cortex-M3 core provides useful control capability, and its two 16-bit timers are suitable for sample-rate generation or timing acquisition windows. The 1.85 V to 3.8 V supply range simplifies integration with low-voltage analog systems. Designers should account for the 2 KB RAM limit when buffering samples and avoid enabling unused peripherals to conserve energy.
پێشنیارکراو
Connected IoT Sensor Interface
The EFM32TG108F8-QFN24T can act as the low-power sensor-interface MCU in an IoT node before data is handed to a radio subsystem. Its 17 digital I/O pins and two timers support sensors, interrupt inputs, and periodic sampling, while rapid wake-up behavior reduces the time the controller remains active. The compact 24-QFN package assists board miniaturization. Because only 8 KB of Flash is available, communications framing should be concentrated in a dedicated radio or companion MCU when the application requires it.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EFM32TG108F8-QFN24T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EFM32TG108F16-QFN24T | EFM32TG108F32-QFN24T | EFM32TG110F8-QFN24T | EFM32TG110F16-QFN24T | EFM32TG108F4-QFN24T |
|---|---|---|---|---|---|---|
| Package | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 KB | 16 KB | 32 KB | 8 KB | 16 KB | 4 KB |
جیاکەرەوە سەرەکییەکان
- Lower Flash capacity supports simpler firmware configurations (بەراورد بەEFM32TG108F32-QFN24T)
- Half the Flash of the F16 family member (بەراورد بەEFM32TG108F16-QFN24T)
- Matching flash capacity with a larger TG110 peripheral platform (بەراورد بەEFM32TG110F8-QFN24T)
- Compact 24-QFN implementation with 17 digital I/O pins (بەراورد بەEFM32TG110F16-QFN24T)
تێبینییەکانی دیزاین
Budget the 1.85 V to 3.8 V operating range against the complete board power tree, including sensor interfaces and any radio. Place the required local bypass capacitors beside the supply and ground terminals using the manufacturer datasheet layout, keep the return-current path short, and verify brownout behavior before relying on deep sleep. Disable unused peripherals and select the lowest suitable clock configuration during idle periods to improve the service life of a battery-powered product.
Treat the 24-QFN footprint as a compact RF- and thermal-sensitive layout. Use the manufacturer land pattern, maintain the specified pad and mask dimensions, and provide an uninterrupted ground reference beneath the device where the package design permits. Route high-speed or switching-node connections away from the MCU, supply pins, and exposed-pad region. Inspect the assembled board for solder bridging because the closely spaced 0.5 mm-class QFN terminals can be difficult to inspect optically.
Do not select this MCU from clock speed alone. Confirm that final linked firmware fits within 8 KB of Flash, that the worst-case stack and data buffers fit within 2 KB of RAM, and that every required peripheral is available on the selected pins. Firmware developed for a TG110 or larger TG108 memory variant should also be checked for peripheral differences, startup assumptions, and timing changes before reuse.
Evaluate junction temperature from the actual regulator dissipation, PCB copper area, enclosure temperature, and nearby heat sources. The 5 mm by 5 mm QFN package can conduct heat through its exposed pad and PCB copper, but a small board or enclosed installation may not sustain the required temperature rise. Use the manufacturer thermal characterization data for the final board construction rather than assuming that the package body temperature equals the junction temperature.
زانیاری پابەندبوون
The manufacturer and distributor listings identify the part and package but do not state the requested compliance statuses. No additional regulatory claim is inferred.