EFM32TG110F8-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG110F8-QFN24T ✓ چالاکEFM32TG110F8-QFN24T گشتی
A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on one semiconductor die. The EFM32TG110 belongs to the Tiny Gecko family of 32-bit embedded MCUs, placing an ARM Cortex-M3 core within the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. Silicon Labs positions this low-power platform for energy-sensitive embedded products that require fast wake-up operation and energy-saving modes.
The principal feature set includes operation up to 32 MHz, 8 kB of Flash, 2 kB of RAM, and 17 digital I/O pins. Two 16-bit timers support periodic timing, input capture, output compare, and basic motor or control functions. Integrated AES hardware accelerates cryptographic operations, while the three operational amplifiers reduce the need for external analog signal-conditioning components in suitable low-power measurement circuits.
The 1.85 V to 3.8 V operating range permits use from 2 V-class and 3.3 V systems when the individual rail, peripheral, and timing requirements remain within device limits. The 24-QFN 5 x 5 mm package provides a compact surface-mount option for space-constrained products. Because the QFN has no exposed leads, PCB layout must provide adequate solderable land area and careful thermal-via placement beneath the package where appropriate.
Typical applications include low-power sensor nodes, compact industrial control modules, battery-operated accessories, small motor-control systems, and embedded instrumentation. The ARM Cortex-M3 architecture provides a familiar software ecosystem, while the 8 kB Flash footprint makes the MCU most appropriate for compact control logic rather than resource-intensive applications. The 2 kB RAM also favors targeted buffering and state management over large data acquisition workloads.
Designers should allocate decoupling capacitors close to the supply pins, confirm that every exposed-pad thermal and solder-layout requirement follows the package drawing, and keep analog signals away from fast-switching nodes. The three operational amplifiers and 17 I/O pins should be assigned only after checking the pin-mux limitations, analog operating ranges, and shared peripheral resources in the manufacturer pin description table.
This product page consolidates the core MCU specifications, package constraints, application guidance, and validated cross-reference options into one engineering-focused reference. It also highlights memory differences and family considerations that determine whether a candidate can replace the EFM32TG110F8-QFN24T without PCB or firmware redesign.
جێگرەوەکانی جێگۆڕکێ بۆ EFM32TG110F8-QFN24T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EFM32TG110F8-QFN24T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Series, Timers, Run Mode Current.
EFM32TG108F16-QFN24T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32ZG108F8-QFN24T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
EFM32ZG110F4-B-QFN24
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG110F8-QFN24T زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 8 kB |
| RAM | 2 kB |
| Digital I/O Pins | 17 |
| Timer Count | 2 |
| Timer Resolution | 16-bit |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.85 V to 3.8 V |
| Processor Core | ARM Cortex-M3 |
| Bit Width | 32-bit |
| Integrated Analog Amplifier Count | 3 |
| Hardware Encryption | AES |
| پاکێج | 24-QFN (5 x 5 mm) |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی EFM32TG110F8-QFN24T 24-qfn (5 x 5 mm)
ڕێکخستنی پین بۆ EFM32TG110F8-QFN24T (پاکێجی 24-qfn (5 x 5 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EFM32TG110F8-QFN24T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EFM32TG110F8-QFN24T گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Nodes, Compact Industrial Control Modules, Battery-Operated Accessories, Small Motor and Timing Control, Embedded Instrumentation, Low-Power IoT Control Nodes.
Battery-Powered Sensor Nodes
The EFM32TG110F8-QFN24T fits compact sensor nodes that periodically wake to measure a physical quantity, process it locally, and return to a low-power state. Its 32 MHz ARM Cortex-M3 core provides enough performance for control logic, while 2 kB RAM supports small working buffers. The Tiny Gecko platform includes fast wake-up and energy-saving modes that help control average current. Three integrated operational amplifiers can condition suitable sensor outputs without immediately adding external amplifiers, although input range, noise, offset, and output-swing requirements must be checked before use.
پێشنیارکراو
Compact Industrial Control Modules
The EFM32TG110F8-QFN24T is appropriate for small control modules that combine digital inputs, timing functions, and limited analog measurement in a space-constrained board. Its 17 digital I/O pins and two 16-bit timers can support sensors, status indicators, actuators, and periodic control tasks. At a maximum clock speed of 32 MHz, the Cortex-M3 core supports responsive firmware without requiring a higher-performance MCU. The 24-QFN 5 x 5 mm package reduces board area, although careful QFN land-pattern design and exposed-pad soldering are necessary for reliable manufacturing.
پێشنیارکراو
Battery-Operated Accessories
The EFM32TG110F8-QFN24T can serve as the central controller in a small battery-operated accessory where fast wake-up and low-power behavior are important. Its 32-bit Cortex-M3 architecture handles protocol state machines, user-interface logic, and timing tasks in one compact package. The integrated AES hardware supports secure data handling, while three op-amps may assist with analog front-end functions near the sensor input. Overall battery life depends primarily on the system's active duty cycle, radio activity, sensor load, and the selected MCU energy mode rather than on CPU frequency alone.
پێشنیارکراو
Small Motor and Timing Control
The EFM32TG110F8-QFN24T is suitable for small motor-control or timing systems that require two dedicated 16-bit timer resources and 17 digital I/O pins. The timers can organize periodic counts, pulse generation, capture events, or compare operations, while the 32 MHz core executes the supervisory control loop. Its 1.85 V to 3.8 V supply range can simplify low-voltage system partitioning when the motor driver and sensors use compatible rails. The three integrated op-amps are useful for sensing motor voltage or current only when their electrical limits and current-detection method are appropriate.
پێشنیارکراو
Embedded Instrumentation
The EFM32TG110F8-QFN24T can support compact embedded instrumentation that acquires a limited number of analog or digital measurements and performs local processing. Three integrated operational amplifiers reduce board area when the required signal range and bandwidth fit their specifications, while the 17 GPIO pins accommodate sensors, switches, displays, and communication links. The 2 kB RAM is adequate for targeted filtering and short measurement buffers but not for large sample histories. Firmware should use timer-based sampling and stream processed results rather than retaining unbounded raw data.
پێشنیارکراو
Low-Power IoT Control Nodes
The EFM32TG110F8-QFN24T supports low-power IoT control nodes that periodically process local inputs and communicate with a nearby network interface. The low-power Tiny Gecko architecture provides fast wake-up and energy-saving modes, while the 32 MHz Cortex-M3 core handles protocol framing, local logic, and device-state management. AES hardware can accelerate authentication or encrypted payload processing without burdening the core. The 8 kB Flash and 2 kB RAM favor compact code and working sets, so applications requiring larger protocol stacks or local data buffering should evaluate EFM32TG108F16-QFN24T.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EFM32TG110F8-QFN24T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EFM32TG108F16-QFN24T | EFM32ZG108F8-QFN24T | EFM32ZG110F4-B-QFN24 |
|---|---|---|---|---|
| Package | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Flash Memory | 8 kB | 16 kB | 8 kB | 4 kB |
جیاکەرەوە سەرەکییەکان
- Combines Cortex-M3 control, analog amplifiers, and encryption in one compact device (بەراورد بەEFM32ZG108F8-QFN24T)
- Lower Flash configuration can reduce code-memory pressure (بەراورد بەEFM32TG108F16-QFN24T)
- Matches the 24-QFN footprint while preserving a 32 MHz Cortex-M3 design target (بەراورد بەEFM32ZG110F4-B-QFN24)
تێبینییەکانی دیزاین
Design the PCB land pattern directly from the 24-QFN 5 x 5 mm package drawing and follow the manufacturer's soldering, cleaning, and inspection guidance. Place the input and output decoupling capacitors close to their associated supply pins, provide a continuous ground reference beneath the device where the package drawing permits it, and inspect the exposed thermal pad after reflow. Do not treat the pad as an automatically connected ground surface until its electrical designation is confirmed in the pin table.
Build the supply rail so that it remains between 1.85 V and 3.8 V under startup, load transients, temperature, and regulator tolerance. Use local high-frequency bypass capacitors and add bulk capacitance where the selected regulator and load require it. Check peripheral-specific current limits and analog operating voltages rather than assuming the core supply range applies to every analog function. This is particularly important when the three operational amplifiers drive capacitive inputs or external sensor networks.
Do not assume that equal package dimensions guarantee a safe MCU substitution. Review alternate-function mappings, analog-capable pins, power pins, ground connections, debug interfaces, interrupt assignments, and peripheral clock requirements in the manufacturer pin description table. For EFM32TG108F16-QFN24T, the 16 kB Flash changes the memory map relative to the 8 kB EFM32TG110F8-QFN24T and may require linker, boot, and production-test adjustments even when the physical footprint remains unchanged.
Separate analog inputs from digital switching paths and keep sensitive op-amp inputs away from the MCU supply, clock, and high-current output traces. Use a quiet ground strategy for analog return currents and avoid routing measurement signals beneath fast edges or noisy power-regulator areas. The three integrated amplifiers reduce board space but still require impedance control, guarding where appropriate, and calibration for offset and gain before measurements are trusted.
زانیاری پابەندبوون
Compliance declarations for the exact EFM32TG110F8-QFN24T ordering code were not identified. Request current manufacturer compliance documentation through the Request a Quote form before using the device in a regulated product.