EFM32TG210F32-QFN32T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG210F32-QFN32T ✓ چالاکEFM32TG210F32-QFN32T گشتی
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The EFM32TG210 belongs to the Tiny Gecko family, which places it in the hierarchy of ARM Cortex-M3 MCU, 32-bit microcontroller, embedded processor, and integrated circuit. Its combination of a 32 MHz Cortex-M3 core and energy-saving operating modes is intended for battery-powered sensors, portable instruments, industrial controls, and connected embedded products.
Principal features include 32 KB of Flash memory, 4 KB of SRAM, 24 digital I/O pins, two 16-bit timers, AES hardware security, and three operational amplifiers according to the product-page information for this device. The Tiny Gecko platform supports fast wake-up behavior and multiple low-power modes, including a Stop mode specified as low as 0.6 uA for the EFM32TG family. These characteristics allow firmware to remain dormant between measurement or communication events and reduce the energy burden of always-connected battery equipment.
The EFM32TG210F32-QFN32T uses an ARM Cortex-M3 processor with a 32-bit RISC architecture. The processor can achieve as much as 1.25 Dhrystone MIPS/MHz, while the integrated architecture also includes a Memory Protection Unit supporting as many as eight memory segments and a Wake-up Interrupt Controller for events occurring while the CPU sleeps. Autonomous peripherals can perform selected functions with limited processor intervention, helping both response speed and energy efficiency. A family run-current figure of 150 uA/MHz indicates how processing demand translates into active operating power.
Typical uses include low-power sensor nodes, battery-operated industrial monitors, compact instrumentation, wearable accessories, connected building equipment, and control systems with a small analog-signal-processing requirement. The three operational amplifiers can support local conditioning of sensor outputs, while AES hardware can accelerate compatible cryptographic workloads. The 24 digital I/O pins provide external interfaces for sensors, buttons, indicators, communications, and actuators, subject to the device's complete pin and peripheral multiplexing configuration.
PCB design should preserve the manufacturer's recommended QFN land pattern, thermal-pad connection, and decoupling arrangement. Confirm the exact supply configuration and decoupling values in the EFM32TG210 datasheet, and account for exposed-pad heat flow when operating near the device's upper ambient-temperature limit. Treat the T ordering suffix as a packaging identifier and verify the assembled orientation, pin-one location, and tray shipping format before releasing production artwork.
This page combines the device's manufacturer specifications, package and memory details, application guidance, comparison criteria, and substitution constraints into a practical engineering reference. It also distinguishes true pin-compatible options from related family members whose Flash capacity, peripheral set, or package differs, helping designers make a replacement decision without assuming that a similar EFM32 designation guarantees drop-in compatibility.
جێگرەوەکانی جێگۆڕکێ بۆ EFM32TG210F32-QFN32T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EFM32TG210F32-QFN32T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Digital I/O Pins, Package, Product Type, RAM.
EFM32TG210F32-QFN32
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG210F32-QFN32T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG210F32-QFN32T زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Family | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| CPU Core | ARM Cortex-M3 |
| CPU Architecture | 32-bit RISC |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 4 KB |
| Digital I/O Pins | 24 |
| Timers | 2 x 16-bit timers |
| Operational Amplifiers | 3 |
| Hardware Security | AES |
| پاکێج | 32-QFN (6 x 6 mm) |
| جۆری دامەزراندن | Surface mount |
| ڤۆڵتیەی دابینکردن | 2.5 V / 3.3 V |
| Stop Mode Current | 0.6 uA |
| Run Mode Current | 150 uA/MHz |
| Processor Performance | 1.25 Dhrystone MIPS/MHz |
| Memory Protection | Up to 8 memory segments |
ڕێنمایی ڕێکخستنی پینی EFM32TG210F32-QFN32T 32-qfn (6 x 6 mm)
ڕێکخستنی پین بۆ EFM32TG210F32-QFN32T (پاکێجی 32-qfn (6 x 6 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EFM32TG210F32-QFN32T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EFM32TG210F32-QFN32T گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Portable Medical and Wellness Devices, Low-Power Connected Controls, Compact Instrumentation and Test Equipment, Energy-Smart Building Nodes.
Battery-Powered Sensor Nodes
The EFM32TG210F32-QFN32T fits battery-powered sensor nodes that spend most of their time asleep and briefly process measurements. Its 32 MHz Cortex-M3 provides enough computing performance for filtering, calibration, and local decision logic, while the 4 KB RAM supports moderate working buffers. The Tiny Gecko family's Stop current can be as low as 0.6 uA, and Run current is specified at 150 uA/MHz for the family, helping engineers calculate duty-cycle-dependent battery demand. Twenty-four digital I/O pins support sensors, indicators, and wake sources. The 32-QFN 6 x 6 mm footprint also preserves space for compact wearable or environmental monitoring products.
پێشنیارکراو
Industrial Condition Monitoring
The EFM32TG210F32-QFN32T is appropriate for industrial condition-monitoring modules that periodically inspect vibration, temperature, pressure, or equipment state. The three integrated operational amplifiers can condition suitable low-level analog signals near the sensor, reducing board area and the opportunity for interference between the sensor and controller. Its 32 KB Flash accommodates acquisition routines, event classification, and communication protocols, while two 16-bit timers support periodic sampling and time-based control. Fast wake-up behavior helps the module react promptly after an interrupt or timer event while remaining in a low-power state during idle periods.
پێشنیارکراو
Portable Medical and Wellness Devices
The EFM32TG210F32-QFN32T can serve as the control core in compact medical-adjacent or wellness devices where low power, local signal conditioning, and secure data handling are important. The three operational amplifiers support suitable excitation, buffering, or sensor-conditioning functions, while AES hardware provides a hardware-assisted path for compatible cryptographic operations. Twenty-four digital I/O pins allow connection to sensors, displays, buttons, and low-power communication hardware. Because the device is only 32 MHz with 4 KB RAM, firmware planning should focus on compact control tasks and avoid workloads requiring large local buffering. Medical claims and final compliance depend on the complete finished system rather than the MCU alone.
پێشنیارکراو
Low-Power Connected Controls
The EFM32TG210F32-QFN32T works well in low-power connected controls that wake to exchange data and then return to a sleep state. The 32-bit Cortex-M3 can handle protocol state machines and local control logic, and the 32 KB Flash provides room for firmware while the 4 KB RAM is appropriate for short-lived packet and peripheral buffers. Low-power modes reduce energy use between radio or sensor activity, while the 24 GPIO pins can control indicators, relays, or interface transceivers. Designers should use the family power figures of 150 uA/MHz in Run and as low as 0.6 uA in Stop as starting inputs, then include the selected radio and regulator consumption in the system-level battery calculation.
پێشنیارکراو
Compact Instrumentation and Test Equipment
The EFM32TG210F32-QFN32T is suitable for compact instrumentation that combines measurement, control, and a serial data interface. Three operational amplifiers can implement front-end amplification, filtering, or level conversion for suitable analog signals, and the two 16-bit timers provide timing resources for acquisition and waveform-control tasks. The 32 MHz processor can execute measurement sequencing, calibration, and communications while the microcontroller's low-power states reduce energy when the instrument is idle. The 32-QFN package reduces board area, but engineers should preserve the manufacturer's exposed-pad and decoupling layout and verify analog pin tolerances against the selected sensor output range.
پێشنیارکراو
Energy-Smart Building Nodes
The EFM32TG210F32-QFN32T can support energy-smart building nodes that monitor occupancy, environmental conditions, or equipment state while operating on limited power. Its 24 digital I/O pins provide flexible connections to sensors, digital interfaces, and status indicators, while three op-amps can support appropriate analog conditioning without requiring identical external amplifiers in every channel. The Cortex-M3 core handles local filtering and event logic, and the Tiny Gecko low-power modes are valuable when nodes are distributed throughout a building and communicate only periodically. The small 32-QFN package supports compact enclosure designs, while AES hardware may assist secure firmware or communication tasks when supported by the complete application stack.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EFM32TG210F32-QFN32T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EFM32TG210F32-QFN32 | EFM32TG210F32-QFN32T |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 32-QFN (6 x 6 mm) | 32-QFN (6 x 6 mm) | 32-QFN (6 x 6 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB (32K x 8) | 32 KB (32K x 8) | 32 KB (32K x 8) |
| RAM | 4 KB | 4 KB | 4 KB |
| Digital I/O Pins | 24 | 24 | 24 |
| Timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers |
| Operational Amplifiers | 3 | 3 | 3 |
| Hardware Security | AES | AES | AES |
| Family Stop Mode Current | 0.6 uA | 0.6 uA for the EFM32TG family | 0.6 uA for the EFM32TG family |
| Ordering Suffix | T | Without T suffix | With T suffix |
جیاکەرەوە سەرەکییەکان
- Provides the full 32 KB Flash configuration within the compact Tiny Gecko family (بەراورد بەEFM32TG210F16-D-QFN32)
- Combines three integrated operational amplifiers with a 32 MHz Cortex-M3 (بەراورد بەEFM32TG210F8-QFN32T)
- Uses a compact 32-QFN 6 x 6 mm package for space-constrained embedded products (بەراورد بەEFM32TG210F32-QFN32)
تێبینییەکانی دیزاین
Use the manufacturer QFN-32 land pattern and preserve the exposed-pad connection described in the EFM32TG data sheet. Place all required input and output bypass capacitors immediately beside their associated pins, with the shortest possible return path to the ground plane. Confirm pin-one orientation against the package drawing and assembly drawing before fabrication. A mechanically similar 6 x 6 mm QFN is not sufficient for a valid PCB footprint; pad dimensions, thermal pad, solder-mask definition, and paste pattern must match the specified package.
Estimated: using the EFM32TG family Run-mode figure of 150 uA/MHz, continuous operation at 32 MHz corresponds to approximately 4.8 mA of processor-associated current before peripheral and system loads are included. This estimate is not a guaranteed application current and should be checked against the data sheet operating conditions. Add sensor, communications, and regulator losses, and evaluate average consumption using the actual active and sleep duty cycle rather than selecting solely from the maximum CPU frequency.
The 32-QFN package requires attention to its exposed thermal pad and board copper when the processor remains active near maximum frequency. Keep the thermal pad connected according to the manufacturer's layout guidance and provide surrounding copper for heat spreading. Validate the final assembly with a thermal test at the highest expected ambient temperature and production load. Because SOA is applicable to power semiconductors rather than digital microcontrollers, thermal qualification should rely on the package thermal data and measured board performance.
Do not treat related EFM32TG210 memory variants as equivalent substitutes: the F16 and F8 options have only 16 KB and 8 KB Flash, respectively, compared with 32 KB in the F32 device. Also verify that any alternate ordering suffix preserves the required temperature grade, qualification, package, and shipping format. A software image that fits within 16 KB might still fit physically but could exceed the alternate part's memory once startup data, libraries, and future updates are included.
زانیاری پابەندبوون
The manufacturer product page and EFM32TG data sheet do not explicitly state the requested compliance classifications in the cited text. Confirm RoHS, REACH, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals documentation for the exact ordering code before production release.